1. Vikas Kumar
Electronics & Instrumentation Engineer
Mob.no. +965-98957292
Vikaskuma@gmail.com
Work & Responsibility:-
Assistlead controland instrumentation engineerin monitoring theEPC Contractor;ensure
contractbasis& design intentis maintained;usePMCcoordination procedureprocess;identify
potentialcontractual issuesassociated with instrumentsystemsasthey occur
InterfacewithClient, EPC representatives&vendor’srepresentatives;attend and participatein
coordination and progressmeetingsirrespectiveof location.
Review and commenton EPCdocumentation foralloperatorinterface/ control/ interlock /
safetyrelated definitions,typically P&ID’s,control& safety narratives,cause&effectdiagrams,
logic diagramsDCS/ SIS/ FGS and other systemspecifications,systemarchitectures,and any
othercontrol & safetysystemrelated documentsthatdefinesystemfunctionalrequirement
Participatein HAZOP/ SIL review meetings,ensuring implementation of safety instrument
function design through theprojectlife cycle in accordancewith review reports,including review
of calculations
Review and commenton preparation &developmentof EPCDCS / SIS/ FGS material
requisitions,technicalbid evaluationsof vendor’sproposals,vendorsupplied documentation
including hardware& softwareconfiguration definition,associated EPC/vendordata exchange
methodology and systemtesting throughthecompletepurchaseorderlife cycle to SAT
Review and commenton EPCdesign documentation including control/instrumentroom
layouts, cabling installation design, earthling philosophy etc.
Review and commenton thepreparation of thecontrol systemrequirementand associated
integration to overall systemstrategy forpackageunits,supporting PMCpackagespecialistsin
the review and commentof equipmentmaterialrequisitions,technicalclarification and bid
evaluations,documentreviewand approval
Providesupport to otherPMC specialistsin the review of other aspectsof the design,such as
electrical consumption forelectrical powersupply design,heatdissipation forHVACdesign,
processcontrolof electrical equipment,weightand dimension forcivil / architecturedesign
Ensurethat all commentsareconsistentand are included in the drawingsaccording to the
applicableprocedure
Review and commenton instrumentbill of quantity and subcontractorrequisition forcontrol
systemhardwareinstallation work
Review and commenton functionaltestproceduresduring pre-commissioning /commissioning
when requested by Client
Develop a complete understanding of Refinery'soperating facilities,vis-a-visthequality
assuranceanalyzersin open loop & closed loop systems.
Closely coordinatewithplantoperating personnelto provideservicesas required.
Develop and implement a quality assuranceprogramformaintenanceof theRefinery analyzer
systems.
Responsibleto performthe preventiveand breakdown maintenanceof processand ambient
analyzersin plantareasincluding AnalyzerShelters.
Provideadministrativeleadership and technical guidanceto the supporting craftsman.
Participateand encouragesubordinatecraftsman to reportNearMissIncidentsand Safety
Suggestions.
2. Vikas Kumar
Electronics & Instrumentation Engineer
Mob.no. +965-98957292
Vikaskuma@gmail.com
Participatein training coursesconducted by theCompany likeWork PermitAuthorization,
Handling Breathing Apparatus,FireFighting and useof Fire Extinguisher'setc.
Practice the Tool Box talk beforecommencementof any workplantarea.
Possessgood hand-on knowledgeon maintenanceof onlineprocessand ambientairmonitoring
analyzers.
Computerliterate and working experienceon WindowsOperating System.
Sound knowledgeof physicalmethodsof analysisand samplehandling systemsand operating
principles of processonline analyzersforqualitativeand quantitativeassessmentusing data
acquisition computersand microprocessorsetc.
To undertakeQCfunctionsin the workplacefordaily QCactivities.
To conductinspection of rawmaterials,boughtoutitems and review of MaterialTest
Certificates(MTC) and the specification requirements.
To interfaceand coordinatewithclients forQC mattersand coordinatewith third party
inspection agenciesforall related inspection activities.
To prepareQualityControlprocedures,Inspection TestPlans(ITP) according to project
requirementsand client specifications.
To plan and superviseSubcontractorinspection activitiesand reviewsof Sub ContractorQC
performance.
To supervisestaff forreporting,recording and inspection activities
To undertakethepreparation of FinalHanding overdossierand maintain properfilling system
(asper Company procedure)with fulltraceability forretrieving thedocument
To havea proactiveapproach in problemsolving
To managethesupplierevaluation and in-processinspection atthemanufacturing location;
applicableto the respectivediscipline of specialization
To coordinate the reviewof drafttenderdocumentstoensure all systemsandcomponentsof
the tenderare
included.
To coordinate the preparationof tenderdocumentationqueriestoconsultants/clientsto
confirmandcollectany missingdataincluding;shippingcosts,insurance,andanyregional
requirements.
To prepare reportsandsupportingdocumentstosubmittoProposal Coordinatortoidentify
areas requiringmore informationtoensure the Companyispositionedtowinandsecure bids.
To developtendercostsummariesincludingequipment,materialsand laborcalculationsfor
final approval.
To coordinate andundertake the interpretation&review of systemdrawingstoidentifyany
difference totenderrequirementsandraise queries againstspecification.
To coordinate andundertake the review andgenerationof Bill of Quantityagainstsystem
drawingstoensure alignmentandtoidentifymaterialstypes&quantitiesandprepare
equipmentlistsandroughdrawingsforcostestimation.
To interpretandfollow Companytenderingprocessesandprocedurestoensure all aspectsof
tendersare metincludingrelevantdisciplinecodesandstandards.
3. Vikas Kumar
Electronics & Instrumentation Engineer
Mob.no. +965-98957292
Vikaskuma@gmail.com
To coordinate andundertake the preparationof specificationdocumentstosubmittovendors
for quotationsof cost/price of materialsandequipmentandevaluate same againsttender
specificationstoinclude infinal tenderdocumentation.
To buildrelationshipsandliaise withinternalcustomersandexternal suppliersandvendorsand
manage dailycorrespondenceforquantities,costsandspecifications.
FollowandmaintainCompanystandardsof Qualityinaccordance withCompanyQualitySystem
requirements
To check,inspectandtestincomingraw materials/instrumentstoensure thattheymeet
projectcontract specification/contractrequirements
To performthe in-processinspectionasperQC proceduresandInspectionandTestplan(ITP)
To coordinate with Client/Consultantforthe verificationof processinspectionforvariesQC
activitiesandsigningoff all QCdocuments
To followandensure the properfillingsystem(inaccordance tothe Organizationprocedure)
withfull traceabilityforretrievingthe document
Skills/ Qualifications:-
Degree in Electronics & InstrumentationEngineering with a proven trackrecord in conceptual
studies.Obtained 74.5% marksand placed as first classfromsastra university Tamilnadu.
FEED, detailed engineering,procurementand construction(EPC)
Extensiveexperiencein the design and implementation of DCS/ SIS / FGS / miscellaneous
systemsand associated architectureforlargescale refinery projects
Knowledgein implementing projectsusing SmartPlantInstrumentation (IN tools)
Conversantwiththelasted advancesin control and instrumentation technology (fieldbus,
wireless systems,etc.) and standards(IEC61508, etc.)
Familiar with working in a client/PMCenvironment,ishighly motivated,well organized,
resourcefuland proactivein engaging theclient, projectteamand suppliers
Possessgood interpersonalskillswith sound written and oral communication skillsin English
Flexible approach and ableto workunderpressurewith a can-do attitudeand a desire to win
Ability to promotean open and informalcommunication environmentthataimsatgrowing
mutualtrustand teamwork
Organizational Scan:-
KuwaitIndustrialgases(2014 to present) Kuwaitworked asshiftleader. Worked in shift as
instrumentation projectengineer, routinedoing servicing of yokogawa dcs,field instrumentslike
transmitter,controlvalves,analyzers,did upgradationof dcsfromcentum3000 to centumVP.
Worked on morethan 25 online analyzers.
Linde India Limited (2011 to 2014) worked aslead Instrumentation engineer,completed 3
consecutivelarge scale projectof industrialgasplantbeginning promFeed to commissioning
and hand over.Installation Emerson Delta V Dcs and SiemensPlcs formore than 5000 I/Os.
NationalIndustrialgasplants(2009 to 2011) as instrumentation engineer.Worked mainly on
PCS7 Siemensdcs,routine maintenanceof DCs,analyzercalibration,filed instruments
4. Vikas Kumar
Electronics & Instrumentation Engineer
Mob.no. +965-98957292
Vikaskuma@gmail.com
maintenance. Also commissioned one65 tpd Air cryo USA air separation plantof 600 I/osand
Pcs7 Dcs.
Goyal MG gases(2007 to 2009) worked asshift engineer,operation and maintenanceof 100 tpd
ASu plant, did Erection & commissioning of RaipurUnit100 tpd Air separation plantand worked
in ASPunit Durgapurasmaintenancecumshiftleader.
Bombay oxygen corporation limited (2006 to 2007) worked astrainee engineer, operation and
maintenanceof 100 tpd ASU plant, worked on ABB dcs freelance2000 and different
temperatureand processcontrollers .
Erection & Commissioning:-
62x Lin Air Separation Unit(supplied by air cryo,USA) of NIGPat QATAR.(2010-2011)
853x2 tpd ASu plantRourkela (India) Of LindeIndia.(2011-2012)
330 tpd ASU plantTaloja (India) of LindeIndia (2012-2013)
600 tpd ASU PlantRengali forBhushan Steel (2012-2014)
Training:-
Delta V Dcs (Emerson Engineering Mumbai) in 2013
Yokogawa centum VP (Yokogawa Middle East Bahrein) in 2017
Knowledgepurview:-
Analyzer: Servomax, Fuzi, Teledyne Control’s Analyzer for O2, N2, AR, CO2, THS (TOTAL HYDRO
CARBON), GE, Analysis.
DCS: ABB (Freelance 2000), YOKOGAWA (CS 1000) and SIEMENS (PCS7)
PLC: ALLENBRADELY, SIEMENS, GE-FANUC.
Transmitters: Yokogawa,Siemens Smart Transmitter for Pressure Transmitter, DP Transmitter,
Level Transmitter, Flow Transmitter
Instruments: Druck DP calibrator, Dead weight tester, ma loop calibrator.
Control Valves: Samson & Koso, kammer, valtech, metso, research motion control.
Actuator of ON-OFF valves such as Metso & Samson
Otherinstruments: MagneticFlow Meter, Gas detector,RTD Thermocouple,PressureGauge,
PressureSwitch,Level gauge,Level switch,vibration transmitter,Speed indicator,etc.
Personnel Dossier:-
Date of Birth : 21st July, 1983
PermanentAddress: Village: Dumariya,P.O.:Harnahi,P.S.:Baruraj,District:Muzaffarpur, Bihar