1. CURRICULAM VITAE
Name : - Siddharth M.Pawar
Date of Birth : - 2nd
May 1982.
Place of Birth : - Dombivli,Thane
Gender : - Male
Marital Status : - Married
Nationality : - Indian
Address : - B/25, Summer Vile C.H.S,
Ramdas Nagar, Vasai East, Dist: Thane. 401202.
E - Mail : - siddharthpawar@rediffmail.com,
siddharthpawar24@gmail.com
Cell : - 9867946490/9022826241
Passport No. : - H4570629 Place of Issue. : Thane.
Date of Issue : - 25.05.2009 Passport Validity: 24.05.2019
…………………………………………………………………………………………………………………
Career Object.
To be part of an organization which offers challenging career opportunities,
utilizing my knowledge and experience for mutual benefits and providing the excellence
and growth.
Professional Experience: Overall 10 Years of Professional Experience.
Educational Qualifications:
 B.E in Mechanical Engineering.
Educational Qualifications:
 Certified CSWIP 3.1 Welding Inspector.
 Certified ISO 9001:2008 QMS Lead Auditor.
 ASNT Level II (RT,UT,MPI and LPT)
 Basic Course of Painting and Coating (NACE).
 Piping Engineer, EIPET (Thane).
Areas of Interest.
Welding Inspection, Fabrication & Quality Assurance.
1

2. Completed Design software:
 Design software Auto-Cadd.
Computer skills:
• M.S. Office
Safety Courses:
1 Elementary First Aid Training.
2 Personal Survival Techniques.
3 Fire Fighting Techniques.
4 H.U.E.T
Knowledge.
Knowledge in Welding, Non Destructive Examination, Material Inspection, Hydro
Testing of both onshore and Offshore/subsea pipelines, Coating/Painting with general
construction activities, Codes & Standards and Quality Management.
Familiar with Codes,
ASME, ASTM, AWS, BS, API, EN, IS, DNV.
Professional Experience:
1. Company Profile:
Presently working in DNVGL a Norway based company which was established in
1864 to meet the ever increasing demand for competent Third Party Inspection and
certification services in India and world wide .Globalization demands that services are
rendered and reported instantaneously. DNVGL Oil and Gas is managed by
professionals who have demonstrated expertise in this segment, especially in Oil/Gas
Onshore and offshore industries.
Designation & Duration
Senior Inspection Engineer from December, 2009 to till Dated
Job Profile:-
1. Deputed as Inspector at fabrication yards for witness / Monitoring of Fit-Up,
Weld Visual, NDT (RT, UT, MPT etc), and Hydro-testing for pressure piping.
2. Deputed as Inspector for witness To approve Welding Procedure Specification
(WPS) and Welding Performance Qualification (WPQ).
3. Deputed as Inspector for witness of mechanical testing (tensile, impact Etc.) and
Corrosion testing (SSCC, HIC) at various testing Laboratories.
4. Deputed as Job carried out day to day activities on the offshore platform such as
Inspection of Joint Fit-up and Weld Visual, Interpretation of radiographs and
witness of UT, MPI, PT, VT and hardness testing. Mechanical Clearance of Piping
Spools, Witness of Hydro Testing, Pneumatic Testing and Leak Testing Pre-
commissioning and Commissioning for Offshore platform Revamping.
5. Deputed as Inspector for Pipe, Fittings, Flanges and Plates inspection.
6. Deputed as inspector Certification Authority for, Ball Valves, Globe valve and
2

3. Gate Valve inspection as per API 598, Hydro-test-Seat, Shell, Pneumatic and
Document Review.
7. Deputed as Inspector for witness / Monitoring of online Pipe Production.
Inspection was carried at every stage from Ingot preparation to bare pipe
Coating and Marking of pipes. Witness of Mechanical testing (Tensile, Impact
etc.), Corrosion (HIC, SSCC etc.) and First day Production testing (CTOD, SSCC
etc.)
8. Deputed as inspector for witness / Monitoring of the project consists of pre
engineering survey, design and detail engineering, procurement, fabrication and
installation IUG, OCI, and subsequently modifying the existing platform.
9. Deputed as Inspector for witness / Monitoring of Sub sea pipe laying, testing
and pre- commissioning.
10. Deputed as Inspector for witness / Monitoring of Sub sea pipe video survey for
Jacket Face, free span, Debris and installed spool.
11. Deputed as Inspector for witness / Monitoring of Synthetic Ropes Inspection as
per OCMIF Guidelines.
Significant Achievement:-
 Offshore Grid Interconnectivity For power to ESP (OGIP) for ONGC.
 B 193 Sub Sea Pipe Line project for O.N.G.C. Ltd (Onshore and offshore).
 26 Well revamping project for O.N.G.C/Sarku
 ICP – R project for ONGC ( Client : Afcon Gunanusa Joint Venture )
 PRP – 2 for O.N.G.C. Ltd. (Client Leighton Cont. Pvt. Ltd.).at Malaysia.
 Inspection of Pump skids and Solution Tank for Leighton/Petronash at Dubai.
 Pipe Replacement Project – 3 for O.N.G.C. Ltd. (Client ONGC.) in India.
 Pipe Puller Head Fabrication for Leighton Contractor Pvt. Ltd.at Thane.
2. Company Profile:
Employed with SGS INDIA PVT.LTD, Ahmedabad a Geneva based
Inspection and Certification Company. Deputed at Shree Cement, Beawar, and
Rajasthan. For Inspection of Waste Heat recovery Boilers Fabrication.
Designation & Duration
Inspection Engineer from July, 2009 to December, 2009.
Job Profile:-
1. Implementation and monitoring of QAP requirements and assure compliance,
2. Inspection carried out as per Cods, Standard, Specification and QAP.
3. Witness of Fit-Up, Weld Visual, NDT (RT, DPT, MPT) etc.
4. Review isometric drawings & ensure approved WPS as well as qualified welders
are available,
3

4. 5. Witnessed / monitoring of Welding Procedure Specification (WPS) and Welding
Performance Qualification (WPQ).
6. Witnessed of mechanical testing (tensile, Impact Etc.) and Corrosion testing
(SSCC, HIC) at various testing Laboratories.
7. Witnessed / monitoring Pipe, Fittings, Flanges and Plates inspection.
Significant Achievement:-
 2X18 MW Power of Boiler WHR Project for Shree Cement at Beawar, Rajasthan.
 Shutdown project at ESSAR refinery at Jamnagar, Gujarat.
2. Company Profile:
Worked with INTERNATIONAL CERTIFICATION SERVICES PVT.LTD is one of
leading India Based Third party service providing company in offshore field; carrying
out different projects for O.N.G.C., such as Inspection of Maintenance of
Painting/coating and Revamping of Process and Unmanned platforms.
Designation & Duration
Q.A. / Q.C. Inspector- From September 2007 to April 2009.
Job Profile:-
1. Witnessed Fit-ups and welding at fabrication yards.
2. Implementation and monitoring of QAP requirements and assure compliance,
3. Inspection carried out as per Cods, Standard, Specification and QAP.
8. Witness / Monitoring of Fit-Up, Weld Visual, NDT (RT, UT, MPT etc), and Hydro-
testing for pressure vessel, piping spool, Structure etc.
4. Review P&ID, isometric drawings & ensure approved WPS as well as qualified
welders are available,
5. Witnessed / monitoring for Welding Procedure Specification (WPS) and Welding
Performance Qualification WPQ.Check approval of all necessary documentation
has been obtained and the inspection formats properly filled,
6. Inspection of Painting and coating for offshore Platforms and steel structures.
7. Witnessed of mechanical testing (tensile, Impact Etc.) and Corrosion testing
(SSCC, HIC) at various testing Laboratories.
8. Vendor Inspection of Pipe, Fittings, Flanges, Valves and Plates.
Significant Projects:-
 Maintenance Painting and coating Project ONGC (MH Offshore)
 General Vendor Inspection.
 Deputed TPI for MGL city gas distribution project in Mumbai city.
4

5. 3. Company Profile
Worked with M/s Metal Form leader in manufacturing of Automobile
radiator caps and automobile accessories.
Designation & Duration.
QA/QC Engineer - From August 2005 to September 2007.
Job Profile:-
 Checking of finished material and preparing dimensional reports.
 Co-ordinate all QA/QC work, inspection and maintenance of all relevant records.
 To Check Inward and outgoing materials.
4. Company Profile
Worked with M/s Pankaj Industries manufacturer and leader in
manufacturing of Pharmaceutical Tablet Punching Tools.
Designation & Duration.
QA/QC Engineer - From July 2004 to July 2005.
Job Profile:-
 Checking of finished material and preparing dimensional reports.
 Co-ordinate all QA/QC work, inspection and maintenance of all relevant records.
 Checking Quality of product at all stages.
 Operation of C.N.C Tablet punching m/c.
Inspection at approved Vendors:
I. V &M Tubes Plant for Pipe inspection, Germany.
II. Leighton Contractor Pvt. Ltd. WPS/PQT Approval, Malaysia.
III. Petronash for solution Tank inspection at Dubai, UAE.
IV. Essar Refinery for Heat Exchanger tube inspection, Jamnagar, India.
V. Hilton Metal Forge Mumbai for fittings and flanges, Wada, India
VI. Valvex for valve inspection , Khopoli , India
VII. Peco valve Mumbai for valve inspection, Vasai,India
VIII. Dembla Valve for Valve Inspection, Mumbai ,India
IX. Rubber Products Ltd for Rubber Inspection, Thane , India
X. Inspection of Oil Storage tanks for HPCL.
XI. Anchor Offshore EOT Crane inspection, Turbhe, India.
…………………………………………………………………………………………………………………
Declaration: -
I affirm that, to the best of my knowledge and beliefs, all the information in this
application along with enclosures are true and correct.
5

6. Place: - Mumbai.
Date: -
(Siddharth M.Pawar)
6

7. Place: - Mumbai.
Date: -
(Siddharth M.Pawar)
6