1. CURRICULAM VITAE
Position Applied for QA/QC Inspector / NDT Coordinator/Document
Controller
Objectives:
To be efficient member of a progressive industry offering a challenging job, an opportunity for career
development and increasing responsibility based on demonstrated performance.
Overview:
Over10years of experience as QA/QC Inspector / NDT Coordinator/Document Controller in
fabrication and maintenance of offshore structural and piping work. Refurbishment of Rig and
accommodation module etc. Having sufficient knowledge and familiarity of commonly used codes and
standard in offshore industries (AWS D1.1, ASME, API, DNV, BV & ABS etc).
Education Qualification:
B.com : Karnataka University
Higher Secondary School Certificate : Board of Public Examination Kerala India.
Secondary School Leaving Certificate : Board of Public Examination, Kerala India.
Certification& Training:
ASNT Level- II in (RT- UT- MT- PT) methods.
Passed “ITI (Mechanical- Welding & Fabrication)” from Kerala India.
Work Experience in U.A.E:
Currently working as a QA/QC Inspector / NDT Coordinator/ Document
Controllerfor Dragon Offshore Industries LLCSharjah, HFZA, UAE –(2006–At
present).
PROJECTS HANDLED:
Dragon offshore Industries LLC, Sharjah, UAE
Project :Refurbishment of Rig Thule Power.
Duration :May 2006 – Jul 2009
Client :Thule Power
Class : BV
A r u n G e o r g e
Dragon Offshore Industries LLC,
P.O.Box: 42711, HFZA Sharjah, UAE.
Mobile: +971-558563252
Email: arun.george05@yahoo.com
2. Project :Refurbishment of Rig Shahid Modarress.
Duration :Aug 2007 – Sept 2009
Client : IOOC
Class : DNV
Project :New build of Living Quarter FXLQ – 20 men capacity and FYLQ – 45 men
Capacity for Foroozan offshore complex in Persian Gulf
Duration :Aug 2009 – Jun 2013
Client : IOOC
Class : GL
Project :Mechanical Repair/Replacement of Salman Offshore Oil field in Persian Gulf
Duration :Nov 2011 – Dec 2013
Client : IOOC
Class : GL
Project :Foroozan Renovation & Reconstruction Project
Duration :Nov 2011 – Dec 2014
Client : IOOC
Class : GL
Project :New build of SOLAN TANK - DDW
Duration :Dec 2013 – Mach 2014
Client :DDW - Dubai
Class : DNV (Premier Oil)
Project :New build of ABB rooms and Pipe rack for Offshore Wind platform Dolwin 2
Duration :May2013 – Jan 2014
Client :DDW - Dubai
Class : DNV
Project :Refurbishment of Rig Strategic Excellence Conversion
Duration :Aug 2013 – Jul 2015
Client : DOIL
Class : BV
Project :Refurbishment of Rig UNITED 1
Duration :Aug 2014 – Ongoing
Client : DOIL
Class : BV
Project :Aboozar A20 & A21 Offshore Complex Platforms
Duration :Aug 2012 – Ongoing
Client : DOIL
Class : SGS
Project :Hengam Offshore Development Project
Duration :Aug 2015 – April 2016
Client :IOOC (IRANIAN OIL OFFSHORE COMPANY)
Class : GL/SGS
3. Duties and Responsibilities:-
Inspection of incoming raw materials as per project specification and applicable standard / class
requirement.
Submit structural inspection request to the client in coordination with site engineer at different
inspection stages.
Coordinate with third party inspection agency for NDT, DT and mechanical testing as per
project specification.
Preparing NDT mapping as per project spec. and class requirement.
Review issued shop drawings correct revision & date and update drawing register every day.
Review WPS & PQR approval before commencing welding.
Witnessing of pressure test of piping system (Hydro test, Pneumatic test) as per line list.
Carry out punch list work of mechanical completion and and witnessing of commissioning work.
Inspection of subcontracted works, review of fabrication checklist.
Responsible for submission of all final QC handover documents to the client.
Checking incoming material such as raw materials, prefabricated materials, and welding
consumables
Reviewing material certificates/batch certificates to check compliance with project
specifications, expiry dates, and meeting the required mechanical/physical/chemical
composition values
Reviewing quality plans, ITPs, approval for project specifications based on client specifications
Conducting Witness of Welder Qualification Test (WQT) as per relevant codes and
specifications
Checking and verifying drawings and specifications and ensuring that drawings are in current
revision and approved fabrication by authorized customer’s representatives
Interacting with fabrication project team for progress, project problems, specification
interpretation and special inspection
Handling site inspections such as fit up inspections as per approved drawing and welding
inspection prior to welding and ensure that only qualified welders are allowed to perform in
accordance with approved WPS
Preparing daily welding reports, weld traceability record, test package and test reports
Performing field inspections for ongoing welding and finished weldments at site
Conducting weld audit periodically to ensure that the quality of the welding activity,
maintaining records of all welders and ensure their qualification continuity. Continuously
monitoring the performance of the welders
Handling all the NDT activities & monitoring as per project specifications
Interpreting radiographs and reviewing NDT reports
Coordinating with client, authorized inspector, and third party inspection department at various
stages of manufacturing activities
Preparing and submitting final documents
Key Skills:
Mechanical Quality Control Nondestructive Testing
Subcontractors Management Project Management
Team Management Material Checking
Drawings & Specifications Checking Good Communication Skills
Independent Thinking & Reasoning Workplace Health & Safety Knowledge
4. ComputerSkills:
Ms. Office (Word & Excel )
Internet& Email.
Languages:
English, Hindi&Malayalam.
Personal details:
Name of Father : George
Date of Birth : 09/05/1982
Sex : Male
Nationality : Indian
Religion : Christian
Passport # : K 4609429
Place of Issue : Dubai
Date of expiry : 17/01/2022
Visa status : Employment Visa (Hamriyah Free Zone Sharjah)
Declaration:
I hereby declare that the above information given is true and correct to the best of my knowledge.
Place : Yours truly
Date : (Arun George)