1. 1 | P a g e
CURRICULUM VITAE
MOHD NAZRI BIN NGAH
No 25,Lorong Balok Perdana 1/6,
Taman Balok Perdana,
26080 Kuantan, Pahang,
Malaysia.
H/P No: +6019-9360123
Tel. No: +6012-2769367
E-mail: nazringah67@yahoo.com
PERSONAL DATA
 I.C Number : 800622-11-5669
 Passport No : A27008913
 Age : 37 years old.
 Date of Birth : 22nd
June, 1980
 Marital Status : Married
 Sex : Male
 Nationality : Malaysian
 Race : Malay
 Health : Excellent
OBJECTIVE
 To Secure A Position In Engineering Of Oil & Gas And Petrochemical Field To Get More Work Experiences,
Skills And Knowledge To Achieve It’s Respective Goals and Seeking Employment With a Company Where I Can
Use My Talents And Skills To Grow And Expand The Company.
 I Want To Succeed In A Stimulating And Challenging Working Environment, Building The Success Of The
Company While I Experience Advancement Opportunities And I Want To Be Part Of The Success In An
Environment Of Growth And Excellence.
 To Commit My Role And Work Hard To Make Sure The Project Successful.
TECHNICAL QUALIFICATIONS
 Diploma in Welding Technology SKM LEVEL 3 AND 4.
Advance Technology (ADTEC) Shah Alam.
June 2003-June 2005
 Welding & Fabrication Technology SKM LEVEL 1 AND 2.
Institut Kemahiran MARA (IKMJB), Johor Darul Takzim.
June 2000 – Dec.2001
 Sek.Men.Teknik Wakaf Tembusu, Kuala Terengganu.
Sijil Pelajaran Malaysia Vokasional (SPMV)
(Welding and Fabrication Technology)
Jan, 1996 – Dec.1998
 CSWIP of Welding Inspector 3.1
Cert No: 38115/2
THE WELDING INSTITUTE (TWI) UK
April 2009
 CSWIP of Visual Welding Inspector 3.0.
Cert No: 5707
THE WELDING INSTITUTE (TWI) UK
October 2001.

2. 2 | P a g e
COURSE & TRAINING
 Hydrogen Sulphide (H2S) Safety Training.
SEQU Offshore Safety Training Centre.
January 2016
 PCSB Permit to Work (PTW) Certification Training & Assessment.
PETRONAS Carigali SDN.BHD.
June 2015.
 BOSIET (OPITO APPROVED)
SEQU Offshore Safety Training Centre.
December.2015
 BOSIET (OPITO APPROVED)
Cert.No:059742
MSTS, Johor Bahru.
December.2010
 API 570 Certified Pipe-work Inspector
SIRIM Training Sdn.Bhd & NDE Consultant SDN. BHD.
August.2009
 In house training and practical for RT, MT, PT & UT.
Conducted by Mr. Saharudin bin Kambari ASNT Level 3, during API 570 Training Course.
SIRIM Training Sdn.Bhd & NDE Consultant SDN. BHD.
September 2009.
 Safety & Security for Radiography Industry Course.
Atomic Energy Licensing Board (AELB)
April.2009
 NIOSH BP Safety Passport
NIOSH Chukai, Kemaman,Terengganu.
March 2008
 PCN Radiographic Interpreter Level 2 (attended course)
Ruane-Tati, Kemaman, Terengganu.
August.2008
 NIOSH Petronas Safety Passport
NIOSH Chukai, Kemaman, Terengganu.
March 2007
 CIDB Briefing and Courses.
CONSTRUCTION INDUSTRY DEVELOPMENT BOARD MALAYSIA
March 2005

3. 3 | P a g e
WORK EXPERIENCES
Over tenth (10) years working experience as a freelance/contract staff QA/QC Inspector, Welding Inspector,
Mechanical/Piping/Structure Inspector and Defect Inspector (Plant Turnaround) for various
contractors & Owner company of petroleum, thermal power and manufacturing industry in inspection, construction
& maintenance activities of process piping, power piping, pressure vessel, launcher & receiver, heat
exchanger storage tank, steel structures, pipeline, heat recovery steam generator (HRSG) and water-
tube condenser and etc. To witness coating activity, equipment load test, tools calibration, valve testing and RT
films review. Supervise, monitoring and inspection of maintenances activity, in Shutdown job. Well-knowledge
against with Client Specifications, ASME, AWS, ANSI, and API Code.
Summaries of over tenth (10) years’ experience in inspection activities for oil & gas industry and
Power Plant:-
 Construction Works- about 10 years been in the Thermal Power Plants, Oil & Gas Construction Industry for
upstream and downstream works. Involved in inspection for erection & installation of mechanical equipment,
fabrication and testing of steel structural, piping works, pressure vessel, and line pipe/pipe line, offshore
platform, blasting & painting activity upgrading work and new power plants & HRSG plants.
 Materials Inspection against to Purchase Order, Mill Certificate, Design, Contract Requirement, applied
standard & familiar with various types of material, i.e. CS Materials (SA-516, A106B & etc.), Duplex Stainless
Steel, Copper Nickel, Low alloy Temperature steel, Titanium Tube, Cladding, Stainless steel, X65 and carbon
steel etc.
 External and Internal inspection for pressure vessel, heat exchanger, launcher & receiver, storage tank,
condenser and etc. by ensure fitness for services and complying with client and DOSH requirements.
 Equipment Inspection like water pumps, welding generator, air compressor, piping system and etc.
 To witness fabrication, erection and testing of :-
 Piping and line pipe (Fabrication & Installation).
 Pressure vessel (cladding & 50-75mm wall thickness) (Fabrication & Installation).
 Launcher & receiver (X65), Storage Tank (Fabrication & Installation).
 Gas Scrubber Skid, Fuel Gas Skid (Duplex SS), Sump & Drain Skid, C.I Skid (Fabrication &
Installation).
 Condenser for Thermal Power Plant (Fabrication & Installation).
 Steel structural (Fabrication & Installation).
 Riser guard and Riser clamp (Fabrication & Installation).
 Factory Acceptance Testing (FAT) and hydrostatic testing.
 Weighing and load testing.
 Post Weld Heat Treatment (PWHT) and Pre-heating process (electrical strip heater).
 Non-Destructive Testing (NDT) such as RT, DPT/MPI, UT and etc.
 Mechanical Testing/Destructive Testing activities (Hydrogen Induce Cracking Test (HIC),Hardness
Test, Bend Test, Tensile Test and etc.),
 Blasting & painting (Three (3) coat system, glass flake and etc.
 Adhesion/Dolly Test/Production Adhesion/Dolly Test, ‘X’ cut test, Holiday Test and Salt Test (Blasting
& Painting).
 Familiar with Client Specification and International Code and Standard i.e. EMEPMI, GS, PTS, CSP, AWS,
ASME, API, BS etc.
 To monitor & surveillance of Non-Destructive testing activities, QC reports reviewing, NDT Report & Post
Weld Heat Treatment (PWHT) reviewing, Positive Material Identification, Welding works, Hardness Testing etc.
 Line-checking, Punch-list and Red-Line Marking
 Supervise, scheduling, site-planning, expediting and work progress up-dating
 Up-date, daily inspection report, QC Report, prepares final documentation & compiling.
 Be a part of Fabrication, Installation, pre-commissioning and commissioning activities.

4. 4 | P a g e
 To Prepare and to witness technical procedure i.e.: WPS, WQT, PQR, and etc.
 To perform duties as a welding inspector such as before, during & after welding.
Documents Review
Review the project documents such as Project Quality Plan (PQP), Inspection and Test Plan (ITP), QA documents
procedure such as NDT procedures, welding procedures, welding consumables control, mechanical test, record of
welder performance, IFC and as built drawings, flushing, hydro test, reinstatement procedures, distortion control
procedure, arc burn control procedure, sea fastening and etc.
Management Involvement
Participated in weekly QA/QC meeting, Kick off Meeting, monitor of NCRs and follow up the close out, keep the QC
matters update to QA/QC Lead, give the QC input for progress report and update. Participated in Company/contractor
internal audit programmed and problem solving on QC matters.
Code and Standard
Familiar with AWS D1.1, ASME IX and V, API 570, API 510, API 1104 and ANSI B31.3. ASME VIII, ASME I, ASME II,
ASME B31.1.
EMPLOYMENT EXPERIENCES
 Company Name : Moody Intertek Sdn.Bhd.
Position Title : Freelance Welding Inspector/Expeditor on behalf client (Onshore).
Scope of Work : -Inspection/witnessing and surveillance for new fabrication work activities.
-Routine activities are Monitoring Fabrication and testing.
-Materials receiving inspection as per mill certificate & P.O.
-Carried out inspection before, during and after welding and witness
on welding, Monitoring the NDE, PWHT,Hydrostatic test and blasting & painting
as per inspection test plan. Review QC reports, prepare a daily & weekly
inspection report and extended to client.
-Involved in WPS, PQR and WQT. Compilation of reports, red mark drawing for
as built and MDR.
-Evaluate, verify or check adequacy of welding equipment, review electrode
selection, storage and maintenance, monitor, verify or check supplies and
materials (including grinding and back-gouging) to be welded and the type of
weld to be produced.
Industry : Thermal Power Plant, Refinery petroleum & Factory.
Date Joined : July, 2016.
Date Left : 31 January 2017.
Vendor : -Chee Kong,Senai,Johor
o Fabrication of 3000 MT Steel Structure.
-KNM,Gebeng,Kuantan
o Pressure vessel, Process Column and Heat
Exchanger.

5. 5 | P a g e
 Company Name : Petronnic Sdn. Bhd.
Seconded to : PETRONAS Carigali Sdn.Bhd (Dept. of Pipeline & Rejuvenation Project).
Position Title : General/Mechanical/Welding/Residence Inspector on behalf owner (Onshore &
Offshore).
Scope of Work : -Inspection witnessing and surveillance for Engineering, Construction, Installation
of mechanical equipment and Fabrication work activities.
-Monitor, planning and expedite project progress to meet original planning.
-Identify inspection and testing activities as required by quality plan/documented
procedures to demonstrate conformity to the specified requirements.
-Review and witness all documentation as per PETRONAS (PTS) specification.
-As per rep to monitor HSE during the project execution.
-To ensure all the contractor follow the HSE related procedure and the HSE
regulation to avoid any accident or LTI.
-To ensure all the work follows as per quality procedure and PETRONAS
standard.
-Monitor, planning and expedite project progress to meet original planning.
Industry : Oil / Gas / Petroleum.
Date Joined : April, 2011
Date Left : May, 2016
Vendor : - MSET Engineering Sdn.Bhd.Kerteh,Terengganu.
o Launcher & Receiver (Fabrication & installation).
o Gas Scrubber Skid (Fabrication & installation).
o Piping (Fabrication & installation).
o Manual valve testing.
- Steel Hawk Eng. /Yuen Fee (Wah Soon) Engineering Sdn. Bhd.
o Sump & Drain Skid (Fabrication & installation).
o C.I Skid (Fabrication & installation).
o Manual valve testing.
- Jurunature Engineering,Pasir Gudang,Johor.
o Riser guard & Riser clamp (Fabrication & installation).
- PETRA Resources,Labuan/Miri/Bintulu (Offshore)
o Deck extension.
o Platform shutdown activities and installation of equipment from
vendor(fabricator).
o Riser guard & Riser clamp (Fabrication & installation).
 Company Name : Total Sterling Sdn.Bhd
Seconded to : PETRONAS Penapisan Terengganu Sdn.Bhd.
Position Title : Defect Inspector (Onshore).
Scope of Work :-Inspection and monitoring all welding/testing activities include before, during and
after welding/testing.
-Evaluate, verify or check adequacy of welding equipment, review electrode
selection, storage and maintenance, monitor, verify or check supplies and to be
welded and the type of weld to be produced.
-Inspection and testing according to scheme of examination.
-Maintain records of works performed within assigned responsibility and ensure
quality of material used, verify qualification of personnel performing the work,
ensure approved methods are used, ensure advance warnings of possible problem
areas of items is provided to the Company Site Representative and verify
corrective actions including repair are taken.
-Keep the Company Site Representative informed of the current quality status.
Industry : Refinery of petroleum product.
Date Joined : April, 2011
Date Left : April, 2011.

6. 6 | P a g e
 Company Name : Sapura Acergy Sdn.Bhd
Position Title : Welding Inspector (Onshore).
Scope of Work : Inspection and supervise a line pipe for surplus and preservation. Inspection
carried out to ensure that the line pipe is in good condition as per client spec.
Industry : Oil / Gas / Petroleum
Date Joined : February, 2011
Date Left : March, 2011
Vendor :Bredero Shaw,Kuantan.(Sabah SHELL Berhad) for Gumusut-Kakap Deep-water
Project (Oil Export Pipeline (OEPL) Return Surplus Inspection and Preservation).
 Company Name : VELOSI (M) SDN.BHD
Seconded to : Sarawak Shell Bhd.
Position Title : Welding/Residence Inspector (Onshore).
Scope of Work : -Inspection and Supervision for Engineering / Construction/Fabrication/Installation
of mechanical equipment works.
-Witnessed inspection before, during and after welding.
-To witness, reviews and endorsed inspection as per Notification of Inspections.
-Witnessed testing such as NDT, mechanical test, hydro test, leak test and
functional tests as per Project/Client requirement.
-Review all relevant documents, specification and codes, procedures copies such
as WPS, WPQT, Inspection and Test Plan, drawing and other procedures are
approved prior to work execution.
Industry : Oil / Gas / Petroleum.
Date Joined : November, 2010
Date Left : February, 2011
Vendor : MSET Engineering Sdn.Bhd.
o Fuel Gas Skid for F-28 Platform.
o Launcher & Receiver.
 Company Name : KENCANA PETROLEUM SDN.BHD
Position Title : QA/QC Inspector
Scope of Work :-Inspection and Supervision for Engineering / Construction works.
-Performed all QA/QC activities such as Inspection, testing, fabrication and
installation of structural items and piping.
-Ensure all relevant documents, specification and codes, procedures copies such
as WPS, WPQT, Inspection and Test Plan, drawing and other procedures are
approved prior to work execution.
-Perform Fit-Up and Dimension Inspection prior to weld as per drawing and
specification.
-Surveillance / parameter check during welding to verify compliance with
procedure
-Monitoring electrodes controlled (baking/holding temperatures, quantity and
times to be issue / record).
-Witness Nondestructive testing such as Dye penetrant Inspection on piping.
-Coordinate and monitoring hydro and pneumatic test for piping systems and
equipment.
-Contribute idea to Minimized the welding repair percentage and improve the
quality of works.
-Attend meeting with project management team to solve a problem and to achieve
the project schedule.
Industry : Oil / Gas / Petroleum.
Date Joined : March, 2010
Date Left : November, 2010
Vendor : Kencana Pinewell,KSB,Kemaman,Terengganu.
o Exxon Mobil (Provision of Construction Services Contract for
Brownfield Project) for fabrication activities of piping for Tapis,
Semangkok A, B and Jerneh Platform and Extension deck (structural
steel) for Tapis, Semangkok A, B and Jerneh Platform.

7. 7 | P a g e
 Company Name : NDE CONSULTANCY SERVICES SDN.BHD.
Position Title : Defect Inspector/Assistant Defect Leader.
Scope of Work : -Inspection and monitoring all welding activities include before, during and after
welding.
-Evaluate, verify or check adequacy of welding equipment, review electrode
selection, storage and maintenance, monitor, verify or check supplies and to be
welded and the type of weld to be produced.
-Inspection and testing according to scheme of examination
-Maintain records of works performed within assigned responsibility and ensure
quality of material used, verify qualification of personnel performing the work,
ensure approved methods are used, ensure advance warnings of possible
problem areas of items is provided to the Company Site Representative and
verify corrective actions including repair are taken.
-Keep the Company Site Representative informed of the current quality status.
Industry : Petrochemical
Date Joined : May, 2009
Date Left : June 2009
Work Description : As 3rd Party Inspector for plant turnaround scope.
Client : Optimal Petrochemical plant.
 Company Name : WARGA HIKMAT KEJ. SDN.BHD
Position Title : QA/QC Inspector.
Scope of Work : Inspection and Supervision for Engineering / Construction works.
As QA/QC Inspector for in-house contractor in BP Chemical Plant and Polyplastic
Asia Pacific Sdn.Bhd. To perform the in-process inspections and testing
requirements, installation of mechanical equipment, material inspections and
audits, in accordance with the agreed ITP and SOP. This includes witness,
inspections and recording manufacturing data
and review of material and inspection certificates from suppliers and NDE
contractors respectively. To involved in preparation and qualification of new
procedures e.g. WPS, PQR and WQT. To ensure and verify that all production
work are accomplished in accordance with agreed ITP, and to report any
deviations to the QCM if any. Carry out shop fabrication inspection such as
material receiving, dimensional including joint preparation /fit-up, visual
inspection, testing and final inspection.
Date Joined : May, 2008
Date Left : Feb. 2010
Client : BP Chemical Sdn.Bhd, Kuantan, Pahang.
 Company Name : TOSHIBA PLANT & SERVICE CORPORATION (TPSC).
Position Title : QC Inspector
Scope of Work : Inspection and Supervision for Mechanical/Engineering/Construction works.
Industry : Thermal Power (JIMAH Power Plant).
Date Joined : July. 2007
Date Left : April. 2008
Work Description : -Carried out inspection as per project approved ITP.
-Witness/Monitor fabrication/installation activities for storage tank, piping and
pipe supports.
-Carried out line checking base on isometric drawing and P&ID drawing prior
commencement of hydro test.
-Carried out reinstatement after testing.
-Ensure all relevant documents, specification and codes, procedures copies such
as WPS, WPQT, Inspection and Test Plan, drawing and other procedures are
approved prior to work execution.

8. 8 | P a g e
 Company Name : MMC-TEPAT TEKNIK SDN.BHD
Position Title : QA/QC Inspector
Scope of Work : Inspection for Engineering / Construction.
Industry : Oil / Gas / Petroleum/ Thermal Power /HRSG.
Date Joined : June. 2005
Date Left : June. 2007
Work Description : To perform the inspections and testing requirements and material
inspections, in accordance with the agreed ITP and SOP. This includes
witness, inspections and recording manufacturing data and review of material and
inspection certificates from suppliers and NDE contractors respectively. To
involved in preparation and qualification of new procedures e.g. WPS, PQR and
WQT. To ensure and verify that all production work are accomplished in
accordance with agreed ITP, and to report any deviations to the QCM if any.
Carry out shop fabrication inspection such as material receiving, dimensional
including joint preparation /fit-up, visual inspection, testing and final inspection.
Client : Sarawak Shell, TOSHIBA Power Plant, Foster Wheeler, Exxon Mobil and John
Zinc.
 Company Name : PETROCHEMICAL & POWERPLANT SERVICES SDN.BHD.
Position Title : Assistant QA/QC Inspector.
Scope of Work : Inspection for Maintenance / Engineering / Construction.
Industry : Oil / Gas / Petroleum.
Date Joined : Jan, 2002
Date Left : May 2003
Work Description : To involve in preparation and qualification of new procedures e.g. WPS, PQR
and WQT.Request for NDT Inspection such as RT, UT, DPI and MPI
Client : PETRONAS Ammonia, Polyethylene and Optimal.
EXTRA CURRICULAR ACTIVITIES
 Football ( School,IKMJB,ADTEC Shah Alam and Johor Bahru Land & Mines F.C)
 Territorial Army Regiment 502 (ADTEC Shah Alam).
PREFERENCE
 Type of Employment: Permanent and contract.
 Willing to Work Long Hours: Yes, as per project requirement.
 Willing to Travel/Residence: Yes.
 Willing to work anywhere: Yes, as per project requirement.
 Point of Origin for eventual: Kuantan, Pahang, Malaysia.
 Availability Date: As per project requirement.
 Desired Monthly Salary: (Negotiable).

9. 9 | P a g e
REFERENCES
 Mr.Hairus Zaman
Head of Facilities.
PETRONAS Carigali (DPRP)
Tel: +6012-6172073
 Mr.Khairul Nizam bin Hanafiah
Senior QA/QC Engineer.
PETRONAS Carigali.
TEL: +6019-2695796
 Mr.Muhammad Bin Isa.
Welding Engineer.
Exxon Mobil Exploration & Production Malaysia Inc. (EMEPMI)
TEL: +6019-3678351
 Mr.Yusoff Ahmad (EMEPMI)
Senior Welding Inspector.
EMEPMI-TAPIS Project.
TEL: +6019-9533059
 Mr.Shahrul Hisyam.
Authorized/ASME Inspector (A.I)
ABS Consultant.
TEL: +6016-9866372
 Mr.Saharuddin Bin Kambari.
ASNT Level III
NDE Consultancy Service Sdn.Bhd.
TEL: +609-8582168
 Mr.Amrul Abd.Rahman.
Senior Welding Inspector.
Shell Gumusut-Kakap Project.
Tel: +6014-2948187