To develop, source and supply cutting edge, cost effective, world class products and product solutions at affordable rates, in line with continuously developing and evolving industry requirements, with a view to maximizing the performance characteristics of a gamut of machines and engines, always using the latest technology and providing the best and most efficient service.

1. 1. What is the difference between black oil and Maxxion quality oil?
A-
2. What oil based used for Maxxion shuttering oil?
A- Mineral oil based used for Maxxion shuttering oil.
3. Is shuttering oil flammable?
A- Flash point 160 deg C.
4. What are the technical properties of oil?
A- Refer our TDS
5. Can shuttering oil mix with other oil for use of application?
A- NO, not recommended. Because virgin oil properties wasted if mixed.
6. What is method of application?
A- CMR oil apply by roller for details refer our TDS
7. How to apply oil on the plates?
A- For CMR oil apply by roller and for DMR oil apply by motarised Sprinker.
Maxxion Quality oil Black Oil
Purely original Recycle oil
Non-carcinogenic carcinogenic
odourless odour
Frequently Asked Questions

2. 8. How much time taken for casting the slab after oil application?
A- For oil based release time upto maximum 45 days after application
For water based release time is minimum 30-45 min minutes and max 15 days.
NB-Light rains acceptable .But product needs to be reapplied in case of heavy
rain downpour which washes away the oil.
9. Is oil having fatty acid?
A- No
10.Application medium & precautions before applications?
A- Clean plates and clean ghamela
11.Plates position on application
A- For water based should be horizontal
For oil based horizontally or slanted position
12.Who are your Competitors?
A-Our competitors are REBOOL, REZON , SIKA
13.How you compare with them?
A- Benefits
1. Third party approved products
2. Low per sq.ft. application cost
3. Smooth release of plates
4. Eco friendly
5. Best service
6. Non-carcinogenic

3. 14.If we apply water based oil twice what will happen?
A- Very good for plate but not for pocket, for oil based.
B- For water based not advisable. Because it leads to flowing of product on the
ply, thereby creating dry spots at places.
15.Effect of human intake consumption
A- Poisonous.
16.Is it corrosive to plates
A- NO. It is eco-friendly
17.Is it comfortable for RMC?
A- It is totally inert to RMC.
18.Is it comfortable with bonding adhesives?
A-It does not hinder tile bonding.
19.Does it leave an oily black colour on concrete surface and to plate surface?
A- Unlike black oils, CMR & DMR oils leaves smootgh shiny concrete surface.