1. RESUME
NAME : RONALD FUNG CHEE SENG
DATE OF BIRTH : 27 July 1965
NATIONALITY : Malaysian
PERMANENT ADDRESS : 23-02, The Westside One, Desaparkcity No 1, Jalan Resident
Utama 52200 Kuala Lumpur, Wilayah Persekutuan, Malaysia
PERSONAL CONTACT : +6019-3832100 / wytang_my@yahoo.co.uk
OVERALL PROFESSIONAL EXPERIENCE
20 years’ experience in design of process equipment’s, fabrication workshop, plant maintenance and
Project Management for EPCC Projects in the Offshore and Onshore Oil & Gas Industries
EMPLOYMENT HISTORY & WORK EXPERIENCE
Date Employer’s/Company’s name Designation
2014 till present KNM Group
(EPCC Contractor)
Project Manager
(EPCC- Onshore)
KNM Group, a global leader in the manufacture of process equipment and EPCC Contractor for the
oil and gas, petrochemicals, minerals processing, desalination, renewable energy, chemicals, steam
generation, power and environment industries. The Group operates 19 manufacturing facilities and
engineering centres in 12 countries, offering a comprehensive and diversified range of products and
services to its clients in more than 60 countries.
Objectives
To organise, manage and monitor a project organisation in order to undertake a scope of work and achieve
standards of quality, schedule and cost as laid down in the Contract in the interests of both the KNM and
Client.
Reports To
General Manager of Modular Skid Division
Responsibilities
1. Review all bid documentation and the bid estimate.
2. Review and become familiar with the Contract and all procedures required under the Contract.
3. Develop an organization chart
4. Initiate the project by conducting a kick-off meeting with the Project Team and assign duties and
responsibilities as detailed in the organization chart.
5. Develop a project strategy
6. Ensure that all members of the Project document distribution system.
7. Arrange all statutory permits and approvals as required to proceed with the work.
8. Develop a project schedule that coordinates all activities and resources required to complete the
contract.
9. Ensure that appropriate funds and banking facilities are in place.
10. Prepare a project budget on the basis of the project estimate and institute a cost control system.
11. Monitor the progress and performance of all functions areas of the Project Team.
Page of 12
1

2. 12. Prepare regular and timely reports on project progress as required by the Client
13. Monitor all changes to the Contract scope of work.
14. Undertake job site visits if not based at site.
15. Organize and chair Project Team meetings as appropriate
16. Arrange for all progress claims and documentation required under the Contract to be prepared in a
timely manner.
17. Take particular responsibility for safety, industrial relations and staff welfare in all aspects of the
project.
18. Arrange for the preparation of a project historical report at the conclusion of the project.
Page of 12
2

3. Date Employer’s/Company’s name Designation
2011 - 2014 Air Products (M) Sdn Bhd
(Plant Owner – EPCC, build and
operate)
Project Engineer /Manager
(EPCC- Onshore)
Air Products M Sdn Bhd, a global organization in the Fabrication, Manufacturing, Building of EPCC
Gas Processing Plants, Operating and Maintenance of Plants at 40 countries.
Objectives
Provide leadership under the direction of Senior Management in the execution and control of assigned projects
with the ultimate goal of achieving project completion on time within budget, to the satisfaction of customers
and at acceptable levels of quality without compromising safety and reliability.
Reports To
Head Of Global Engineering Organization.
Responsibilities
1. Assist the business area with definition of project scope of supply and with estimating costs for projects.
2. Provide technical point of contact to the business area for assigned projects.
3. Plan the execution of assigned projects and prepare scope of supply documentation after project
authorization is secured.
4. Execute projects as assigned to meet or exceed project schedule, budget and quality requirements. This
includes performing, coordination of resources to complete the design, procurement fabrication,
installation, start-up and commissioning tasks.
5. Report to management on project status.
6. Provide leadership to the team through acceptance of responsibility and example.
7. Provide adequate and timely coordination for members of the project to meet project’s goals.
8. Be a capable and effective communicator, establishing good rapport with customers, adjusting to the
unexpected and adapting prior knowledge to unique situations, providing a mature/steady presence.
9. Capable of distinguishing between the needs and desires of customers and deal forthright but firmly with
customers as required to resolve scope issues that may arise.
10. Capable of working within a team framework with the project team, internal disciplines (eg. Accounting,
purchasing, legal department, commercial groups etc) and external discipline (eg. customers, contractors,
equipment vendors etc)
11. Capable of persevering, negotiating, resolving differences, developing consensus to secure win-win
agreements.
12. Efficient, organized and capable to provide structure, attain/maintain appropriate knowledge and skills.
Page of 12
3

4. Date Employer’s/Company’s name Designation
2009 - 2011 KNM Group Project Manager
(EPCC Contractor) (EPCIC- Onshore)
KNM Group, a global leader in the manufacture of process equipment and EPCC for the oil and gas,
petrochemicals, minerals processing, desalination, renewable energy, chemicals, steam generation,
power and environment industries. The Group operates 19 manufacturing facilities and engineering
centres in 12 countries, offering a comprehensive and diversified range of products and services to its
clients in more than 60 countries.
Objectives
To organize, manage and monitor a project organization in order to undertake a scope of work and achieve
standards of quality, schedule and cost as laid down in the Contract in the interests of both the KNM and
Client.
Reports To
General Manager of Modular Skid Division
Responsibilities
1. Review all bid documentation and the bid estimate.
2. Review and become familiar with the Contract and all procedures required under the Contract.
3. Develop an organization chart
4. Initiate the project by conducting a kick-off meeting with the Project Team and assign duties and
responsibilities as detailed in the organization chart.
5. Develop a project strategy
6. Ensure that all members of the Project document distribution system.
7. Arrange all statutory permits and approvals as required to proceed with the work.
8. Develop a project schedule that coordinates all activities and resources required to complete the
contract.
9. Ensure that appropriate funds and banking facilities are in place.
10. Prepare a project budget on the basis of the project estimate and institute a cost control system.
11. Monitor the progress and performance of all functions areas of the Project Team.
12. Prepare regular and timely reports on project progress as required by the Client
13. Monitor all changes to the Contract scope of work.
14. Undertake job site visits if not based at site.
15. Organize and chair Project Team meetings as appropriate
16. Arrange for all progress claims and documentation required under the Contract to be prepared in a
timely manner.
17. Take particular responsibility for safety, industrial relations and staff welfare in all aspects of the
project.
18. Arrange for the preparation of a project historical report at the conclusion of the project.
Page of 12
1

5. Date Employer’s/Company’s name Designation
2008 – 2009 IEV Group
(Offshore Service Provider)
Project Manage
(Offshore Service Provider –
Installation / Maintenance)
- IEV Group, Asia leading provider in the oil and gas offshore offers a range of innovative and cost
effective engineering solution to the subsea petroleum and marine industries
Subsea Engineering :
a) Cold cutting services – high pressure abrasive water jet (AWJ) cutting system, diamond wire cutting
system
b) Grouting – structural pile grouting on jacket legs, structural repair clamps
c) Corrosion control : cathodic protection, enviro shield, zinc tape, alocit coating
d) Jetty Integrity – jetty inspection on piles, top/bottom deck & CO system
e) concrete mattresses
f) grout bags
Reports To
Report to CEO and assist Head of Operations in special projects
Responsibilities
1. Undertake all roles and responsibilities pertaining to managing the delivery of contractual obligations
and contract administration for Project
2. Responsible for overall coordination and controls of the Project Management Team consisting of
Engineering, Procurement, Cost Controller, Scheduler, Documents Controller, QA/QC, Risk Analysis
3. Administer all project contracts and ensure appropriate documentation and management of project cost
and timelines
4. Manage, liaise and coordinate with customers, 3rd
party vendors and contractors on project deliveries and
contractual obligations
5. Liaise and resolve internally with other departments on related technical, financial and resources related
issues
6. Business development for Oil and Gas sectors by expanding the Company’s business through
identification of new business opportunities and developing existing ones
(new products like pipeline-pigging with chemical cleaning, intelligent pigging, chemical cleaning for
process equipment i.e. tank farm/heat exchanger/boiler/column)
7. Involve in Bid/Tender proposal and submission
8. Participate in Basic Offshore Safety Induction & Emergency Training (BOSIET) including additional
OLF modules with travel safety boat (OPITO approval)
Page of 12
2

6. Date Employer’s/Company’s name Designation
2004 – 2008 CB Industrial Product Holdings
Berhad
(Consultant, Turnkey Contractor of
EPCC projects for palm oil mill
internationally)
Project Manager
(EPCC – Onshore)
Reports To
Report to Project Manager
Responsibilities
1. Responsible for the successful managing project team and delivery of large and small EPCC projects
2. Managing projects value about RM40 million
3. Working with multiple interfaces, internally and externally, including client
4. Responsible for the execution of the work scope as in contract
5. Responsible for change orders, submission to clients for approval
6. Responsible for project team established and maintain close contact with client and smooth project work
flow arrangement with client
7. Responsible for budgeting, planning and scheduling for the project
8. Keep track on project schedule to ensure that the project is accomplished
9. Prepare monthly reports to client on progress and schedule for client’s review and approval
10 Conduct weekly meetings with project team
11 Attend client’s meeting with project team
12 Prepare budget determined by revenue in and expenditure out
13 Responsible for cost control and submitting progress claim to client
14 Responsible for document control of various department
15 Perform site supervision and coordination with site manager and contractors to resolve issue and ensure
that the project schedule and budget are accomplished
Page of 12
1

7. Date Employer’s/Company’s name Designation
2000 – 2004 Wong Heng Engineering Sdn Bhd
(Oil and Gas engineering company that is
engaged in Turnaround, Service /
Maintenance and Fabrication of Pressure
Vessels, Heat Exchanger, Pipe spools,
Storage Tanks & Structures)
Fabrication Manager
(Project/Fabrication/
Turnaround)
Reports To
Report to CEO
Responsibilities
1. Managed the entire Workshop (Engineering, Procurement, Fabrication, Quality Control)
2. Responsible for the Production Floor by ensuring the smooth running of the fabrication works
3. Responsible for the service and maintenance of all machineries, cranes and equipments and ensuring
the smooth running of shop floor
4. Maintained profitability level in workshop
5. Set up and implement ISO system and procedures and proper documentations
6. Managed the entire Engineering Department in engineering design calculations and drawings
7. Liaised with government authorities for Engineering drawing approvals
8. Submit Bid/Tender proposal for Oil/Gas industries
9. Implementation and execution of contract awarded
10 Conduct regular internal meetings to ensure projects are within schedule and budget
11 Attend client’s monthly meeting with team members
12 Responsible for the preparation of project progress to client
13 Support the plant turnaround team in servicing and repairing of shell and tube heat exchangers
14 Responsible for invoicing progress claim and follow-up on collections
15 Business development for Oil and Gas sectors by expanding the Company’s business through
identification of new business opportunities and developing existing ones
16 Sales/Marketing by developing and implementing sound marketing and business strategies
Page of 12
2

8. Date Employer’s/Company’s name Designation
1996 – 2000 APV Hills & Mills Sdn Bhd
(Consultant that deals with
system and process plant
design)
Estimating Manager
(Project/Commercial)
Reports To
Report to Project Manager
Responsibilities
1. Worked closely with Project Manager on tenders
2. Set up ISO procedures for the department
3. Support Project Department on Budget
4. Support sales in pricing
5. Managed a team of estimators
6. Set up program for estimation work
7. Assured timely estimation
8. Coordinate with subcontractors on production floor
9. Worked with project coordinator on accounts and budget
10 Worked closely with Design Department on engineering matters
11 Liaised closely with procurement and materials suppliers on trend of materials’ pricing to ensure
competitive and accurate estimation
12 Liaise with Engineering Department on design calculation in estimation
Page of 12
3

9. Date Employer’s/Company’s name Designation
1993 – 1996 AMC Sdn Bhd
(Oil and Gas engineering company that
is engaged in Turnaround, Service /
Maintenance and Fabrication of
Pressure Vessels, Heat Exchangers,
Pipe spools, Storage Tanks &
Structures)
Estimating/Proposal Engineer
(Project/Commercial)
Reports To
Report to Project Manager
Responsibilities
1. Review work scope and specification of tenders
2. Worked closely with Design Department on engineering calculation for estimation
3 Worked closely in purchasing and sourcing material
4. Prepared estimation calculation
5. Material take off
6. Prepared estimation proposal
7. Prepare change order in project order
8. Prepared proposal for submission of tender
Page of 12
1

10. EDUCATIONAL QUALIFICATIONS
Academic
1990 - 1992 West Virginia Inst Of Technology, USA Advance
Diploma in
Electronics
Engineering
1987 - 1989 FIT School of Electronics Engineering, Kuala Lumpur Diploma in
Electronics
Engineering
1983 – 1986 Goon Institute, Ipoh Certificate
in Business
Studies and
L.C.C.I.
Secondary
1978 – 1982 Anglo-Chinese School, Ipoh SRP, SPM
Primary
1976 – 1977 Anglo-Chinese School, Ipoh Penilaian 5
1973 – 1975 Government English Primary School, Port Dickson
1972 – 1973 St. John’s Institution, Kuala Lumpur
Trainings & Seminars
2009 – Project Management
Computer Literacy
Microsoft Project, Excel, Word and Power Point
Page of 12
2