This resume summarizes the qualifications and experience of Prashant B. Wani. He has over 15 years of experience in project management and process engineering. Some of the key projects he has worked on include water treatment plants, nuclear power plants, and the ITER cooling water system. He is a certified Project Management Professional with skills in areas like project planning, cost control, quality management, and stakeholder management. He has expertise in rotating equipment, piping design, and utility systems for various industrial projects.

1. RESUME
Page 1 of 7
Passport No: G 472399 Validity Aug, 2017
Holding a Permanent Resident Visa of Australia
Email: pras81in@gmail.com
Prashant B. Wani
CAREER OBJECTIVE:
Possessing excellent managerial skills with strategic business vision; personality, track-record & credibility aspire to
yearn my career in Project Management, Process Engineering, Rotating Equipment and Utility system
Engineering.
KEY SKILLS & KNOWLEDGE:
Experience in Industrial, Nuclear, Infrastructure, R&D & Chemical Projects. Responsibilities
included, acquiring hands on knowledge & exposure in Process Engineering in Utility
Systems, Rotating Equipment Packages, Equipment Layout, Detail Engineering, Technical
Specification, Technical Bid Evaluations, Vendor Drawing Review & preparation of Technical
Proposal, whether it is CAPEX or OPEX.
Presently working as a Project Manager. Handled projects as large as INR 150 Million.
Responsibilities included Project Coordination, synchronizing the Construction sequence
and priority with the project schedule and completing all the multi-discipline project
activities to ensure work gets done according to project construction priority and on
schedule. Monitoring and Controlling Scope, Time, Cost and Quality. Monitoring Risks and
mitigating higher risk factors affecting the project and stakeholder management were some
of the key responsibilities as a Project Manager.
Knowledge of International Codes & Standards HIS, API, ASME, ASTM, AWWA & Indian
standards
Knowledge of Engineering Softwares such as WaterGem, Pipenet, AFT Fathom, etc.., 3D
Modeling Software PDMS & CADMATIC, 2D AutoCAD, 3D model design review using NAVIS
Works and Cadmatic E-Browser. Proficient in Project Management Tool, viz. MS Project.
EDUCATION:
Bachelor of Engineering (B. E.) – Chemical Engineering
Mumbai University
1999-2003
Post Graduate Diploma in Piping Engineering
Autonomous
2007
PMI Certified Project management Professional 2014
PROFESSIONAL EXPERIENCE:
Project Management
• Project Estimation
• Scope Management: Preparing Scope Baseline and Requirement Document, Executing the
Project as per the Scope Baseline and Requirement Document and Raising Change Notices
time to time, Change Management,
• Time Management: Preparing Schedule Baseline, Preparing Schedule, Monitoring and
Controlling, Preparing Catch-up plans for out of Schedule activities and mitigating them,
Monitoring the Critical Path Closely. Seeing to that the Project is completed on time.
• Cost Management: Managing cost in terms of Direct and Indirect Cost on the project,
completing the project in specified no. of man hours, maintaining direct overheads on the

2. RESUME
Page 2 of 7
project, managing the contingency reserves.
• Quality Management: As per the company standards, Quarterly Project Audits were held to
ensure the processes were followed and Quality checks were done by means of checklists
and different level reviews thereby ensuring error free deliverables.
• Risk Management: Preparing risk register and monitoring them at various stages of the
project,
• Stakeholder Management: Identifying Stakeholders and analyzing their influence on the
project, Managing stakeholder expectations, training needs identification and planning them,
Conflict Management,
Rotary Equipment Packages
Having experience in preparation of data sheets, technical specifications, reviewing technical
offers, preparation of technical bid analysis, Vendor drawing review of following rotating
equipment
• Pumps (Horizontal Centrifugal Pump, Submersible Pumps, Sump Pumps, Self Priming pump,
Monoblock Pumps, Vertical turbine pump i.e. Boiler feed pump, Condensate extract pump,
condenser cooling water pumps and other utility pumps)
• Blowers (Centrifugal)
Utility systems (Cooling Water Systems, Drainage Systems, Water Supply Systems, Pump
House Design and Pumping System Design, cross country piping, steam system, Fire
Protection System, compressed air & other plant water systems)
• Preparation of PFD/ P&ID
• Preparation of Intelligent P&ID
• Preparation of Design Note/ Design Basis Report
• Line sizing & Hydraulic calculations.
• Equipment sizing and selections
• Pump House Design based on HIS
• Design of DG Oil Storage Area as per OISD-118
• Preparation of Technical specifications
• Preparation of Equipment data sheets
• Technical Bid Analysis & Vendor Drawing Review
• Took Part in the HAZOP Study at various stages of the project,
• Performed RAMI and FMEA Analysis of systems and Equipment
• Familiar with hydraulic analysis software like AFT Fathom, WaterGem, Pipenet, etc.
Business Development
Preparation of technical proposal, methodology & estimation of efforts for mechanical scope of
work for various projects.
CAREER PATH:
1. TATA CONSULTING ENGINEERS LTD, MUMBAI Oct ‘07-Till Date
Assignment as Project Manager
Project 1: Sulaibiya 250 MLD Water Treatment Plant, Halfaya
Client: GE Water (EPC)
Continuous Projects (of MEA (Middle East Africa)) related to Water Treatment
and consisting of UF, RO, CO2 Stripper, CIP, Dosing Area, etc. Responsibilities
included planning and scheduling, Clearing Interdisciplinary issues, On Time
Delivery, Within Time and Cost, Took part in 3D Model Reviews and Follow-ups

3. RESUME
Page 3 of 7
for Signoff, Follow-ups for various Approvals.
Project 2 : 700 MWe RAPP-7&8 Balance of Turbine Island Package Project
Client: L&T (EPC)/ NPCIL (End User)
Project Location: Rajasthan
Main project features: Rajasthan Atomic Power Project consists of two units
(RAPP-7&8) of 700 MWe with two steam driven turbo generators supplied with
steam from PHWR type Reactors. Scope of works included Piping & equipment
Layout Engineering, 3D automation & 2D extraction using PDMS, Preparation of
Piping & Valve material specifications, Bulk MTO generation, Vendor offer
review, Stress Analysis as per static & dynamic load combinations, Pipe support
design & qualification, etc.
Responsibilities & Achievements:
• Project Initiation: Initiated JCM (Job Commencement Meeting), Internal
Kick-off Meeting and Client Kick-Off Meeting and finalized the Minutes for the
same,
• Planning: Scope document was a part of the contract, Based on that and Past
Data Archives, complete WBS was prepared, planning and scheduling in MSP,
Team was acquired and all the deliverables were assigned to individuals.
Outsourcing activities were planned; Trainings to the Team were planned
based on the gap analysis.
• Monitoring & Control: Preparing Monthly Progress Reports, Holding
Monthly Project Review Meetings internally and with client, monitoring the
progress of the project. Analyzing the delays on the project and preparing a
catch-up plan. Raised a Change Notice of INR 95 Million due to scope creep.
• Coordination with customer and achieving delivery as per project milestone
• Target setting for operational efficiency and productivity for the project
• Maintain key customer relationships and ensure prompt complaint resolution
to enhance customer satisfaction
• Took part in PDMS 3D model review using NAVIS-work file and follow-up for
Sign-off.
Assignment as Specialist Engineer (Water System Engineering)
Project 3 : 2X700 MWe Kakrapara Atomic Power Project Units-3&4- NPCIL
Client: NPCIL
Project Location: Kakrapar, Gujrat
Main project features: Kakrapara Atomic Power Project consists of two units
(KAPP-3&4) of 700 MWe with two steam driven turbo generators supplied with
steam from PHWR type Reactors. Our consultancy contract involves Basic
engineering, 3D modeling & 2D extraction using CADMATIC, Preparation of
intelligent P&ID, Piping & Valve material specifications, Bulk MTO generation,
etc.
Responsibilities:
Design and Engineering of the following systems:
• Active Process Water System,
• Plant Water System including Water Treatment (Pre-Treatment Plant/ Tube
Settler),
• Service Water System,

4. RESUME
Page 4 of 7
• Active and Non-Active Drainage System,
• Fuel Oil and Transfer System,
• Domestic Water System
Cooling water system.
• Mass Balance calculations, Water Balance Diagram & equipment
selections.
• Preparation of P & IDs.
• Pump head calculations. (Manual as well as Software)
• Preparation of Design Basis Report.
• Preparation of Equipment Datasheets,
Project # 4 Thermal Hydraulic Test Facility
Client Name BARC, Mumbai
Responsibilities:
Design and Engineering of the following systems:
Job Description
• Natural Circulation Studies (very similar to Advance heavy Water reactor
AHWR)) ,
• Heat Transfer through Helical Coils,
• Flow Visualization in Helical Coils,
• Blow Down Behavior And Depressurization Studies,
• High Enthalpy Water And Steam Supply System,
• Cooling Water System.
Job Description: Preparation of Design Basis Report, Preparation of P&ID’s,
Design Calculations (including Line Sizing, hydraulic Calculation and pump
selection) for the above systems.
Equipment & Packages handled: Horizontal centrifugal pumps, Canned Motor
Pumps, Vertical Sump Pumps, Submersible Pumps, Tank Heaters, Condensers,
Shell and Tube Heat Exchanger, Atmospheric Tanks, Strainers and Valves.
Project 5 : ITER Cooling Water System
Client: ITER INDIA
Project Location: Cadarache, France
Main project features: : International Thermonuclear Experimental Reactor
(ITER) is an experimental Fusion Reactor being constructed presently at
Cadarache, in the South of France. ITER is a step towards future production of
electricity from fusion energy. Nuclear Fusion is the process in which the Sun
and the stars produce the energy by fusing light nuclei of hydrogen.
Responsibilities:
• Preparation of Process & Instrumentation Diagram (P&ID) & design
calculation report for CCWS & HRS.
• Preparation of Design Notes and Design Basis Report
• Preparation of Intelligent P&ID
• Thermal Hydraulic analysis using AFT Fathom software
• Preparation of Equipment Specifications
• Preparation of Technical Specification and Process Data sheets for:
Horizontal centrifugal pumps, Vertical Turbine Pumps, Submersible
Pumps, Induced Draft Cooling Towers, Plate Type Heat Exchangers,
Atmospheric Tanks, Strainers, Screens and Gates
• HAZOP study of Heat Rejection System and Component Cooling Water

5. RESUME
Page 5 of 7
System where hazards due to process fluids are analyzed.
• Performing RAMI and FMEA Analysis for complete systems,
Worked as Specialist engineer on Rotating Equipment Packages
Project 6 : KAPP-3&4 and RAPP-7&8
Client : NPCIL
• Technical Bid Analysis of vendor offers for centrifugal pumps, valves etc.
• Preparation of Technical bid evaluation and vendor drawing review.
Project 7 : BOTIP KAPP-3&4 and RAPP-7&8
Client : L&T
• Technical Bid Analysis of vendor offers for Horizontal Centrifugal Pumps
and Submersible Pumps
• Preparation of Technical comparison and vendor recommendations.
Project 8 : ITER Cooling Water System
Client : ITER
• Technical Bid Analysis of vendor offers for Horizontal Centrifugal Pumps,
Vertical Turbine Pumps, Submersible Pumps, Sump Pumps, and Cooling
Towers,
• Preparation of Technical comparison and vendor recommendations.
2. MAMKO DESIGN & ENGINEERS PVT. LIMITED, MUMBAI DEC ’06–OCT ’07
A manufacturing and a consulting firm engaged in manufacturing static mixers
and providing process intensification of small scale industries.
Worked as a Design Engineer on the following project:
Project # 9: Vasmol Kesh Kala
Client Name Vasmol Kesh Kala, Kalka (Chandigarh) and Mumbai
Job Description
Designed Scrapped surface Heat Exchanger
Project # 10: Sand And Silt Mine
Client Name Sand And Silt Mine, Jharkhand
Job Description
Commissioning of Hydro Cyclone Separator
Project # 11: Lubrizol India Limited
Client Name Lubrizol India Limited, Mumbai
Job Description
Process design of Shell & Tube Heat Exchangers, Line Sizing and Pressure Drop
Calculation, Preparation of Equipment Layout, Preparation of Piping Layout,
Preparation of Isometrics, Installation of Pilot Plant, Erection and
Commissioning of Pilot Plant

6. RESUME
Page 6 of 7
3. JAYANT BROS. & ENGG. CO. PVT. LTD., MUMBAI APR ‘03–DEC ’06
An Authorizes Dealers of Kirloskar Pumps and doing small Turnkey jobs
offloaded by Kirlosrkar Bros. Limted.
Worked as a Sales Engineer for Kirloskar Pumps
Completed the following Projects:
Project # 12:
Client Name: Mahad Indutrial Development Corporation (MIDC)
Job Description:
Procurement of Vertical Turbine Pumps through Kirloskar Brothers Ltd.,
Procurement of Butterfly Valves, Pipes. Supervision of Erection and
Commissioning of Pumps and accessories.
Project # 13: Barge Pump (Complete Skid Mounted Pumping Unit)
Client Name: Natwar Parikh
Job Description:
Design, Engineered, Supervision in erection and Commissioned of Skid Mounted
Pumping Unit.
Technical Software:
AUTOCAD, AFT Fathom, Pipenet, WaterGem, NAVISWORK, PDMS, COMOS,
Seminars Presented
• Presented Preliminary Design Report of Component Cooling Water
System and Heat Rejection System for first Fusion Reactor in ITER-IO
(France) representing INDIA in FRANCE and on behalf of ITER INDA.
Trainings / Seminars /Certifications
• Certification from Project Management Institute (PMI, USA) as a Project
Management Professional (PMP)
• Successfully completed Project Management (PM) certification training
program
• Workshop on use of MS Project
• Workshop on use of 3D integrated platform for Plant Engineering.
• Workshop on Leadership Acceleration Program-II for Future leaders of
Tata.
• Attended a Conference on AGLC (Annual General Leadership Conference)
addressed by Tata Leaders.
• Conference attended on Development of Indian Nuclear Reactor
organized by Indian Nuclear Society
• Training on Designing of Heat Exchangers.

7. RESUME
Page 7 of 7
Personal Details
Date Of Birth 24th Oct 1981
Marital Status Married
Languages Known English, Gujarati, Hindi and Marathi
Nationality Indian
Countries of work
experience
India, France
Countries Eligible to
Work
India (Citizen), Australia (PR)
REFERENCES
1. M. V. Soman (Vice President & Business unit Head - Nuclear): Mobile No.: +919870240178 (TCE)
2. Pankaj K. Rakshit (General Manager): Mobile No.: +919819410863 (TCE)
3. Anil Toraskar (Ex-Colleague) : Mobile No.: +919821238838 (SEIMENS INDIA)
4. Amit Rambhia (Ex-Colleague): Mobile No.: +919833898051 (Jacobs India)
DECLARATION:
I hereby declare that the above information is true and correct to the best of my knowledge.
PRASHANT BIPIN WANI