The document is a curriculum vitae for Gtdyt. It summarizes her career objective and experience as a Piping Material Engineer working on oil and gas projects for 2 years. It also lists her educational background in metallurgy and material engineering from Universitas Indonesia.
1. CURRICULUM VITAE
Gtdyt
CAREER OBJECTIVE
To work in a progressive and challanging position of Piping Material Engineer, which can
provide the opportunities of enhancing and using my creative, technical and skill of both
piping and material/metallurgy engineering towards the fulfillment of goal of the organization I
am working for.
SUMMARY
A highly-motivated, well-trained individual with 2 years experience of Piping Material
Engineer for Oil & Gas in EPCH Contractor. Being responsible of the integrity of material of
construction used in piping system and having a good knowledge in terms of piping, valves
and piping specialty item engineering and procurement activities, material selection, material
control, piping constructibility and construction sequence.
1 year as junior metallurgist for mineral processing and 2 years as coal and metal lab analyst.
Having a sound knowledge of physical or chemical separations, wet chemical analysis,
instrument analysis, size cummunition, and other mineral processing activities as well as
quality assurance.
Work Experience
1. Company : DSME ( Daewoo Shipbuilding Marine Engineering) Indonesia
Tempo Scan Tower 30th
Floor
Jl. Rasuna Said Kav.3-4 Jakarta 12950, Indonesia
Project : FPSO ITCHYS – INPEX
Period : April 2013 – May 2013, Jakarta - Indonesia
Position : associate Piping Engineer
Project : GINAKROG TOPSIDE PLATFORM – STATOIL ASA
Period : May 2013 – Current, Kuala Lumpur - Malaysia
Position : Piping Material Engineer
Details of responsibilities and capabilities
- Involved in monitoring and reviewing Piping deliverables during detailed engineering
phase such as Piping Material Specification (PMS), valve selection, piping detail
standard, piping specialty item datasheet, bolting specification, technical requisitions,
technical bid evaluation, purchase specification.
- Involved and attend in Material engineering for painting specification, material
selection in terms of fabrication or construction.
Place/date of birth : Bogor/February 20th
,1989
Gender : Female
Nationality : Indonesian
Religion : Islam/Moslem
Marital status : Single
Address : Jl Tentara Pelajar, Cimanggu Gg Pasama RT01 No 11/12,
16162, Bogor, Indonesia
Publika B2-10-2, 1 Jalan Dutamas 1, Solaris Dutamas, , B2 fl-
21, Kuala Lumpur, Malaysia (current)
Mobile phone : (+60) 146397585 (Malaysia)
(+62) 81222214259 (Indonesia)
E-mail : pebridanessyaarlis@yahoo.co.id
2. CURRICULUM VITAE
- Involved in monitoring and reviewing Piping interfaces documents such as P&ID,
Piping insulation specification, Piping painting specification.
- Prepare input or particular data for piping constructibility.
- Monitoring, control and forecasting piping commodity materials and ensures piping
materials are listed and requisitioned to meet project requirements.
- Monitoring and maintain Material Take-Off (MTO) for bulk of pipes/fittings/flanges,
valves, and piping specialty items.
- Involved in review and approval of vendor’ design, drawing as for construction input.
- monitor and maintain deviation such Vendor Concession Request (CR) and Non
Conformance Request (NCR).
- Assist Piping Material Controller on Piping purchase order quantities request.
- Maintain the procurement needed date (PND) on site through Procurement and
Engineering Control Schedule (PECS).
- Coordination with QC and Procurement for inspection, follow-up, and releasing.
- Monitoring Factory Acceptance Test (FAT) report and Ensure that all punch list items
are resolved and engineering handover is satisfactorily concluded.
- Familiar with Piping Process code of ASME B31.3 and other respective ASME for
piping design, API 6D, DNV-OS-F101 or ISO 15590-1, API 6A, ASM, ASTM, ISO, EN,
NACE, MSS, NORSOK standards, Statoil TR requirements relating to design /
material specification of piping engineering and other industrial Standards Practices.
- Familiar with piping and valves design upto pressure class of 4500 rating, modular
(DBB) valves, lined buterfly valves, piping specialty items (Stainers, HIP-ed Manifolds,
PDRA, Static mixer, Utility Station, Induction Bends), Piping Material Take-off, Valve
List, Pipe wall thickness to ASME B31.3.
- conversant to NORSOK painting and Hot/Cold/acoustic piping insulation specification
- Prepare Inputs or particular Data For Piping Constructibility.
- 3D modelling, fabrication iso drawing, basic piping support design, basic piping routing
- Conversant with Material and metallurgy engineering
2. Company : PT.SUCOFINDO (Superintendent Company of Indonesia)
Jl. Arteri Tol Cibitung No.1
Cibitung, Bekasi, 17520
(021) 88321176
Position : Junior Metallurgist (November 2010– November 2011)
Division : Mineral Processing and Metallurgical Testing
Responsibility : As a junior metallurgist, whose task is generally doing researh for the
best or the most efficient method on separating, extracting,
concentrating some precious elements, such as Gold, Silver, Copper,
etc, from their ores, whilst they’re related to their mineralogy and
chemical behavior through floation test, size distributions, gravity
separating and all.
I also do preparation of the receiving samples under strictly QC
procedure to ensure its reliabilities, such :
- Crushing, screening, and splitting bulk samples to prepare them for
subsequent testing
- Pulverizing and homogenizing sub samples for prepare for chem.-
analysis
3. CURRICULUM VITAE
- Particle size analysis, sieve analysis for metallurgy study
For metallurgical recovery system, I work on :
- Floation flow sheets, grinding application, leaching application,
bondwork index, filtering, magnetic separation, etc.
Besides, I do also determining their mineral composition through X-
Ray Diffraction (XRD), and do lab assay for each element. The main
issue is to provide the highest mineral recovery method represented
by flow sheet optimization and quality control investigations. I was
trained to provide risk and safety analysis to each method.
Position : Quality Control Analyst (January 2009 – November 2010)
Project : Coals and Minerals Services
Responsibility : As an analyst whose main task are
- wet-chemically and instrumentally analyzing and/or determining the
trading quality requirements of the coal and its ash.
- So sample characterization and physical properties, Sample-
preparation and lab-sampling
- Extensively, do lab quality control and assurance that refer to
Quality control management of ISO 9001, and 17025 to meet good
laboratory services.
- Regurlarly, I do inter-lab proficiency test as to lab-quality
improvement and monitor performance. and updating some
procedural method to the newest version under ASTM.
- Do statitistically make internal standard referred to the certified
standard materials.
- I strongly maintain all the lab activities under high procedural safety
referred to QHSE management / K3.
3. Company : PT.CORELAB Indonesia.
Kawasan Komersial Cilandak, Gedung 303
Raya Cilandak KKO, Jakarta 12560, Indonesia
Position : Apprentice staff. Environment Department (March – June 2008)
Responsibility : As an apprentice staff whose main task are basically doing
preparation, determining or analyzing of vary samples such as fresh or
waste water, soil, used product, atmospheric /contaminated /pollutant
and other Oil an Gas environment-related materials, in various
parameters by titration, instruments analizing, and even bioassay. Do
Input data and make output data reports. At this term, I also can do
calibration laboratorium equipments and its instruments, validation
methods.
The topic of the final assignment is about Acute Toxicity Test (LC –
50 96h) of Water Based Mud and Oil Based Mud on Penaeus
Monodon.
4. CURRICULUM VITAE
ADDITIONAL QUALIFICATIONS
On-Job training, DSME, Geoje – Korea, June 2013
PMDS training of Aveva Marine, DSME, Jakarta, January – march 2013
“Studi Pipanasi Gas Bawah Laut (Jalur Jawa – Sumatera)” Workshop, University of
Indonesia, Depok, March 2012
“Exploring Gas Potency and Technology Applied to Fulfill National Demand” Seminar,
University of Indonesia, Depok, March 2012
“Corrosion Problems and Mitigation in Indonesian Oil & Gas Industries” Seminar,
University of Indonesia, Jakarta, December 2011
“Welding For Casting Materials” Seminar, University of Indonesia, Jakarta, June 2011
Operation and Maintenance In-House Training of LECO S 632, PT Sucofindo, Bekasi,
April 2009
“Coal Draught Survey” In-house Training, PT Sucofindo. Bekasi, March 2009
Coal-Laboratory In-house Training, PT Sucofindo. Bekasi, February 2009
Fire and Explosion Risk Analysis “Application of Risk Based Approach in Designing O&G
and Petrochemical Installation” Workshop, Faculty of Technique University of Indonesia,
Depok , March 2007.
ISO 9001:2001 and ISO 14001 Workshop, Akademi Kimia Analisis Bogor, 2007.
Participated Achievement Motivation Training (AMT), Akademi Kimia Analisis Bogor,
August 2006.
o PDMS (Aveva Marine)
o Familiar with laboratorium instruments such as UV–Vis Spectrophotometry, Sulfur
analyzer, AFT-furnace, bomb calorimeter, ICP, AAS, XRD, flexural strength machine unit.
o Familiar with metallurgy and mineralogy equipment, such as, microscopes (stereo and
polarized), polisher-grinder, communition equipment, Gemeni table concentrator, Knelson
concentrator, magnetic separator, flotation machine, leaching column/rolling machine, mills
(ring and balls), crushers (jaw and double), spliter or divider, and etc.
o Good computer literate, regular user of Microsoft Office.
EDUCATION
Bachelor Degree, Metallurgy and Material Engineering, Universitas Indonesia, Depok,
2009 - 2012
Diploma in Analytical Chemistry, Akademi Kimia Analisis, Bogor, 2005 - 2008.
Acceleration Study Program of Senior High School, SMU Negeri 3, Bogor, 2003 - 2005
Junior High School, SLTPN 4, Bogor, 2000 - 2003
Elementary School, SDN Pengadilan 1, Bogor, 1994 – 2000.
PROFILE
Self confidence, strong analytical skill, highly motivated, initiatives, dynamic hard-worker,
able to work in team or independently.
REFERENCES
1. Name : Muhidin
Phone No. : +62 8128045708
Position : Mineral Lab. Manager, PT SUCOFINDO
5. CURRICULUM VITAE
2. Name : Ariani Puspita
Phone No. : +62 8132865075
Position : Mineral Processing Lab. Coord., PT SUCOFINDO
4. Name : Cho Bong Hyun조봉현
Email : bhcho1@DSME.co.kr
Position : Deputy of Engineering Manager, Gina Krog Topside, DSME - Korea
5. Name : Robert Bjelland
Email : robert.bjelland@akersolutions.com
Phone : +47 454 11 936
Position : Deputy of Piping Lead, Aker Engineering - Stavanger
INTEREST
Reading, arts, making friends, movies, and traveling.