1. PULVERISER TECHNO SERVICES
REGD; NO. 1870 of 21015
REG.OFFICE: 11-2-337/3/1, Anna Nagar, Office: New MIG No.3841
Mylargadda, Secunderabad-500061 Vidhut Nagar,BHEL
MOB. NO. +91 9866001551 R.C.Puram.
E-Mail:pulve.services@gmail.com Hyderabad-502032
manipavan85@gmail.com
2. Company Profile:
GaneeshDongre
Managing Partner
A post graduate (MBA) in marketing from IIPM, Pune. He has got an vast experience in
marketing.
C.K.Suresh Kumar
Managing Partner
A bachelor of commerce and has a vast experience in marketing, he was an sales in-charge for
an product around 2000 tonns /month. He has an around 35 years of experience in marketing
and banking.
J.G.Kulkarni.
Retd. General Manager/BHEL
Tech. Adviser
He is an Mech. Engineer Graduate from IIT Bombay and retired as General Manager, BHEL In
the year 2012. He has headed pulverisers engg. for a period of 34 years. He has an vast
experience in mill design, modification and renovation.
M.V.Ramanamurthy
Retd. General Manager/BHEL
Tech. Adviser
He is an Mech.Enginer Graduate from REC Warangal and retired as General Manager, Pulverisers
engg., BHEL. In the year 2015. He has headed pulverisers engg. for a period of 10 years. He
has an vast experience in operation of thermal station and mill design, modification and
renovation.
B.Pavan Kumar
Retd. Engineer/pulv.engg/BHEL
Tech. Engineer
He is an mechanical engineer with an 35 years of design and maintenance, experience in
pulveriser. He has worked as designer for Stein design tube mills and was co-ordinator and
team leader for mill Product guarantee test. Under his supervision around 300 mills of NTPC ,
govt. and private sectors mills were tuned and successfully proved the guarantees as per the
contractual agreement. He was an member in analysing the wear out pattern of Grinding media
of Bowl mills and tube mills.
C.S.Reddy
Retd. Engineer/Pulv./FES/ BHEL
Tech. Engineer
He has retired as an master technician working with pulverisers Field engineering services
department. He has got a vast experience in assembly and trouble shooting of all the ranges of
Bowl mill and tube mills. He has put up 35 years of experience in the above field. He is an
member in product guarantee test team also. Under his supervision many of the mills were
erected and commissioned.
Ch.S.N.Raju
Retd. Engineer/Pulv./FES/ BHEL
Tech. Engineer
He has retired as an master technician working with pulverisers Field engineering services
department. He has got a vast experience in assembly and trouble shooting of all the ranges of
Bowl mill and Tube Mills. He has put up 35 years of experience in the above field.
3. Pulverisers are one of the major auxiliaries in a
coal fired thermal power station. They are used
for grinding the pre crushed row coal so that the
pulverised product at desired PF fineness can be
fed directly to the furnace of the steam
generator.
Bowl mill is basically a vertical mill rotating at
moderate speed ( 30 to 55 rpm)about its axis. It
is recognised as the most advantageous design of the coal pulveriser
because of its low initial cost low maintenance
cost removal of tramp iron low power
consumption easy maintenance wide range
output quiet operation.
Ball tube mill is basically horizontal cylindrical
tube rotating at low speed on tis axis. Whose
length is slightly more to its diameter the
inside of the cylinder shell is fitted with
heavy cast liners and is filled with cast
of forged balls for grinding to
approximately 1/3 of the diameter.
Advantages of ball tube mill include high
availability, low maintenance constant,
capacity and fineness, hard and abrasive
fuels ground efficiently, large reserve
capacity, increased fineness at low loads.
Fast response of over range, low air to coal ratio ability to pulverise
a wide range of coals, virtually unaffected by foreign material and
the flexibility of available capacity.
4. CUSTOMER SERVICE:
Our customer service department is here to ensure that customers receive the
best service every time. Typical service are outlined below:
RENOVATION &
MODERNISATION:
Renovation and Modernisation
(R&M) of the coal Pulverisers is
taken up to achieve:
Improvement in PF Fineness for
better and improved boiler
performance (less unburnt of
carbon)
Use of better materials and up to
date Technology (improved
availability)
Focus on Efficient Renovation &
Modernisation (more value for
investment) of smaller mills 603 xrp
to 803 xrp.
We visit the site and study the real
site condition so as to
suggest/recommend measures to
improve availability and performance
of the mills.
FIELD SUPPORT
Apart from field support we also
offer the following services to
customer.
1 .Condition Assessment (CA) studies
2 .Performance Evaluation test (PE)
3. Assistance to customer on trouble
shooting
4. Offering supervisory services
5. Annual/Capital overhauling of
various types of mills
6. Annual maintenace contracts of
rotating parts in thermal stations.
7. Wear assesment of grinding
media.
8. Fine tuning of mills as per the coal
charecterstics
Having business tie up with:
M/s. B.K . Engineering, Durgapur, West Bengal.
Rotating part erectors and annual maintenance contractors with an work force of 400
tehnicians. Having annual maintenne contract with DVC Mejia 5 units of 250 MW having
Tue Mill and 2 units of 500 MW with 1003 XRP mills. At DVC Durgapur Andal TPS 2x500
MW Bowl Mills, DVC Chandrapur TPS 2x250 MW Tube Mills and at DVC Bokaro TPS.
M/s. S.S.Engineering, Chandrapura, Maharastra.
Manuacturers of mills, fans and boiler spares, supplied to MSEB,NTPC,DVC,JINDHAL AND
MANY MORE.