1. Nirav Mistry
Contact: 0062-81210247960 ~ E-Mail: neerav_mistry@yahoo.com
Seeking senior level assignments in Mechanical Engineering for Static Equipment and Packages with a
leading organization of repute in EPC / Oil & Gas / Petrochemicals industry
LinkedIn profile: https://id.linkedin.com/in/niravmistry1
Profile Summary
• A competent professional with more than 14 years of experience in:
~ Front End Engineering and Design ~ Detail Engineering of EPC Projects ~ Vendor Management during Project
~ Engineering Documentation ~ Inter-discipline Coordination ~ FAT Witness for Packages
~ Vendor Documentation Review ~ Construction Support at Site ~ Logistics Support
• Exposure of engineering including meetings with Vendor and ensuring compliance with specification requirements; proven
skills in handling technical matters with customers, vendors, partners and employees
• Working actively with the engineering team and management and is part of the detail engineering team and also plays a key
role in major technical decisions
• Successfully managed multiple projects and milestones while ensuring that the projects are complied with all the technical
requirements and client specifications
• Expertise in planning and executing projects with a flair for adopting modern methodologies in compliance with quality
standards
• Exceptional technical skills with an ability to relate to people at any level of business
• Possess excellent interpersonal, analytical and negotiation skills with distinction of utilising a process-oriented approach
towards the accomplishment of technical reliability, cost, service & organizational goals
Organizational Experience
Since July’12 with PT. Tripatra Engineers and Constructors, Jakarta
Growth Path:
July’12-July’13 Lead Engineer in Mechanical Static Department
Since July’13 Due to excellent performance in Projects, given added responsibility of mentoring fresh
engineers
Key Result Areas:
• Overseeing:
o Preparation of mechanical datasheets & equipment specifications based on client’s project documents.
o Mechanical design, pressure parts calculation, local load analysis, wind and seismic calculations.
o Preparation, reviewing and approval of engineering drawing and loading data.
o Interaction with other engineering disciplines.
o Selection of material based on service requirements.
o All the pre and post bid discussions with bidders.
Front End
Engineering
and Design
Detail
Engineering
of EPC
Projects
Vendor
Management
During
Project
Construction
Support at
Site
Motor Spirit Quality Up-gradation Project
PLUTO LNG Development Project
Saudi Kayan Olefins (Ethylene) Plant Project
South Mahakam Field Development Project
EPC 1, Banyu Urip Project (Exxon Mobile)
Technical Skills Major Projects
Soft Skills

2. o Follow-up of documentation and fabrication status of the equipment via regular progress review meetings with supplier.
o Review and approval of supplier’s fabrication drawings, design calculations and other engineering documents.
o Review and approval of deviation requests from Vendor.
o Interaction with consultants and clients for approval of design and drawings.
• Rendering services as the part of Engineering team; accountable for floating RFQ for the Mechanical discipline to the
manufacturer approved for the project.
• Carrying out technical bid evaluation and analysis of bids from multiple vendors for technical details and compliance to
complete scope of supply.
• Carrying out the technical negotiations and clarifications during bid clarification meetings before the final PO to make sure
vendor compliance to the specification requirements of the project.
• Arranging kick-off meeting with Vendor and Client within a week of issuing PO to make sure remaining small issues are ironed
out and Vendor can start their work immediately.
• In the absence of QC engineer, conducted pre-inspection meeting single handed in Italy with vendor for water treatment
packages.
• Working on vendor interface issues with the different EPC for the Banyu Urip Project along with the Project Interface
Engineering Team.
• Follow up with the logistics team for the shipping arrangements and the Master List Approval for all the high value Purchase
Orders for the Mechanical discipline.
• Conducting progress review meetings visits with client to ensure timely documentation, fabrication and delivery of the
equipment/packages according to the construction requirements to various vendor locations in Indonesia, Singapore, Malaysia,
Italy, United States etc.
• Striving for getting approval for day to day query for package vendors from client & other engineering disciplines.
• Work on the change Orders/Variation Orders from the vendors & provide the justification to agree/disagree the claim to
management and also the vendor.
• Once engineering is about to complete, mobilize to project site for construction support to resolve engineering as well as
construction issues
Highlights:
• Significantly contributed in finalising design of water treatment packages and CPI Separator package.
• Rewarded with an increment of about 20% & the new contract was renewed for 2 years (usually 1 year) under employee
retention scheme for most competent employees.
• Renowned for performing engineering in timely manner and delivering the equipment/packages on time.
• Mobilized to project site for extended period of time to support construction team in resolving engineering and construction
related issues.
• Holds the credit of handling major equipment/packages for the Banyu Urip Project for pre and post PO:
o Boiler Feed Water Treatment Package
o Waste Water Treatment Package
o Corrugated Plate Interceptor Separator Package
o Filters
o HP & LP Flare system
o Sulphur Seal Legs
Projects Handled at PT. Tripatra:
o Banyu Urip Project Detail Design, Procurement and Construction (Client: Exxon Mobile)
Jul’10-Jul’12 with PT. Nippon Steel Construction Indonesia (NISCONI), Jakarta
Growth Path:
Jul’10-Jul’11 Senior Mechanical Engineer
Jan’12-Jul’12 Lead Engineer for Bidding Projects
Key Result Areas:
As Senior Mechanical Engineer (Mechanical Static & Packages):
• Worked hard to maintain weights of equipment within limits so that not to increase overall weight of the platform.
• Worked with Piping/PDMS to make sure nozzle orientations and interconnecting piping are occupying minimum space.
• Suggested idea to client of using Compact Flanges for the project to reduce the weight of platforms.
• Ensured proper coordination with:
o Other engineering disciplines and client
o Project management team to identify additional requirements from clients
o QC team and Vendor to make sure equipment are being inspected as per approved ITP and support for clearing the
punch list after final inspection
o Vendor and Construction team over the modification and changes required pertaining to the specification mis-match
during the engineering stage and procurement
• Single-handedly taken approval from client for changing the design of horizontal vessel supports from conventional saddles to
hanging saddles to resolve the space constraint
Highlight:
• Rewarded with the bonus of US$2,000 from Management of PT. Nippon Steel Construction Indonesia for excellent
performance in project
• Essayed a stellar role as a part of the Construction & Installation team at fabrication yard
• Holds credit for singlehandedly performing detail engineering of all the static equipment for 3 well head platforms for South
Mahakam Field Development Project

3. Projects Handled at PT. Nisconi:
o South Mahakam Field Development Project (Client: TOTAL)
o Bidding for TEN Development Project - FPSO (Client: BW Offshore)
o Bidding for SisiNubi (Phase 2B) Peciko (Phase 7B) (Client: TOTAL)
o Bidding for Husky Madura Field Development Project (Client: BW Offshore)
Details of Other Employers
Oct’09-Jun’10 with WorleyParsons Oman Engineering L.L.C., Muscat
Projects Handled at WorleyParsons:
o Amal Steam Surface Facilities Detail Design & Procurement (Client: Petroleum Development of Oman - PDO)
Oct’06-Aug’09 with KBR Asia Pacific Pte. Ltd., Singapore
Key Result Areas:
As Senior Mechanical Engineer (Mechanical Static & Packages):
• Started working on PLUTO LNG project from the beginning of the FEED all the way up to commissioning support
• Training of fresh graduates in Mechanical Design of Static Equipment and familiarise them with company’s work
procedures
• Stayed involved in the project until commissioning of the platforms
• Worked on two projects in parallel
Projects Handled at KBR:
o Front End Engineering and Design (FEED) and Detailed Engineering of PLUTO LNG Development Project (Client:
Woodside Australia)
o Saudi Kayan Olefins (Ethylene) Plant (Client: Saudi Kayan Petrochemical Company)
Mar’06-Sept’06 with Integral Services Company W.L.L. (ISCO), Kuwait
Projects Handled at ISCO:
o Expansion of New Oil pier At MAA Refinery by Two Additional Berths 5 & 6
o Installation of New Air Assisted Flare in GC’s 3,6,8 &19 at Kuwait Oil Company
Aug’00-Feb’06 with Larsen & Toubro Chiyoda Ltd. (LTC), Vadodara, India
Key Result Areas:
As Mechanical Engineer (Mechanical Static):
• Started career with India’s one of the most reputed engineering company
• Worked on multiple projects at the same time
• Assisted to developed Heat Exchanger & Pressure Vessels design software for mechanical design, which is now being
practiced in Larsen & Toubro Chiyoda Ltd. successfully
Highlight:
• Consistently got higher appraisal throughout employment period
• Got two promotions within 5 years
• Played as captain of L&T Chiyoda Cricket Team and also won inter L&T tournament in badminton doubles
Projects Handled at LTC:
o Offsite & Storage Facilities for Naptha Cracker Unit of Indian Oil Corporation Ltd., Panipat as assistant lead engineer.
o Isomerisation Project of Oman Refinery Company L.L.C. Oman.
o Isomerisation project of Mangalore refinery and petrochemicals limited, Mangalore.
o Methanol Project of Saudi Formaldehyde Chemical Co. Ltd. (SFCCL)
o Offsite & Storage Facilities for Naptha Cracker Unit of Indian Oil Corporation Ltd., Panipat.
o Purified Terapthalic Acid Project, Indian Oil Corporation Ltd., Panipat.
o Sulphur Recovery Unit of Abu-Dhabi oil refinery, Abu-Dhabi.
o Motor Spirit Quality Up gradation Project of Indian Oil Corporation Ltd., Mathura
o Diesel Hydrotreater Unit, Indian Oil Corporation Ltd., Panipat.
o Sulphur recovery Unit of Bharat Petroleum Corporation Ltd., Mumbai

4. Details of Equipment and Packages Handled
• Heat Exchangers: Shell & Tube, Double Pipe, Multi-tube, Plate and Frame.
• Pressure Vessels & Columns
• Pig Launchers and Receivers
• Sulfur Seal Legs (degassing of molten sulphur)
• Filters
• Electric Heaters
• Vent Stacks & Flare Stacks
• Sulphur Condensers, Unfired Steam Boilers (shell & tube type designed per ASME Sec VIII Div. 1)
• Mounded Bullets
• Packages: Flare Tip and Ignition Package, Boiler Feed Water Treatment Package, CPI (Corrugated Plate Interceptor)
Separator Package, Waste Water Treatment Package
International Codes and Standards
• ASME Section VIII, Div 1 & Div 2
• AS 1210 (Australian Design Code for Pressure Vessels)
• TEMA (Tubular Exchangers Manufacturers Association)
• ASTM
• API 660
• PIP (Process Industry Practices)
• PD 5500
• EJMA
• Unified Building Code (UBC) for wind and seismic calculations
• Various Indian codes like IBR, IS 875, IS 1893 etc.
• Well versed with specifications and standards of SHELL DEP, Woodside, TOTAL, ExxonMobil, KBR, SABIC,
UOP, Engineers India Limited (EIL), Fluor, Foster Wheeler etc.
Software Proficiency
• PvElite & CODECAL
• COMPRESS
• Nozzle Pro
• M.S. Office, Window 7, Windows Vista, Window XP, Windows 8
Academic Details
• Bachelors in Production Engineering from Sardar Vallabhbhai National Institute of Technology (SVNIT),
Surat, Gujarat in year 2000 with first class distinction 73.67%
• 12
th
Standard from I.N. Tekrawala School, Surat, Gujarat
Extra-Curricular Achievements
• Actively involved in management of SVNIT’s Annual Events “Sparsh” and “MindBend”
• Played in college cricket team as wicket keeper
• Assisted in arranging blood donation camp in KBR Asia Pacific Pte. Ltd.
Trainings / Certifications
• 3 months Training at Himson Textile Engineering Company Limited, Surat after completing graduation
• Attended various training in L&T Chiyoda Ltd. and KBR Asia Pacific Pte. Ltd. for Leadership, Communication Skills etc.
Personal Details
Date of Birth: 13
th
June 1978
Nationality: Indian
Passport No.: Z2906735 (Expiry Date: 3
rd
April 2024)
Marital Status: Married
Permanent Address: B/102, Neelkanth Avenue, Behind Twin Tower, Besides Pal Water Tank, LP Savani, Pal, Surat
- 395009, Gujarat, India
Present Address: Apartment Aston Rasuna, Tower 4, Unit 3H, Jalan HR Rasuna Said, Kuningan, Jakarta
Selatan, Indonesia
Languages Known: English, Hindi, Gujarati, Marathi and Bahasa Indonesia
Location Preference: South East Asia / UAE / Europe
References: Mr. Jignesh Halani Mr. Sanjay Kumar
SHELL Singapore Husky-CNOOC Madura Limited
(HP) +65 – 82338544 (HP) +62 – 812 685 9102
E-mail: jignesh.halani@shell.com E-mail: sanjay_choubey@hcml.co.id