1. PERSONAL DETAILS
Surname : Naicker
First Name/s : Krubeshen
Date of Birth : 17 May 1971
I.D. Number : 710517 5093 087
Gender : Male
Marital Status : Married
Nationality : South African
Dependent’s : Three
Home Language : English
Other Languages : Afrikaans
Health : Excellent
Home Address : 62 Asteria Road
Larnaco Etstae
Old Main Road
Illovo Beach
Durban South
South Africa
Hobbies : Volleyball, Fishing, Stainless Balustrades.
Criminal Offences : None
Contact Numbers : +27 82 9799 777
Email Address : kruben.naicker@gmail.com
TERTIARY QUALIFICATIONS
Name ofInstitution : South African Institute of Welding
Qualification : Welding and Fabrication Inspectors – Level 1
Senior Welding Inspector – Level 2
CompetentPersons Pressure Vessels (Course Passed)
Busy Obtaining Vessel Inspections for CP Number
Name ofInstitution : CSWIP
Qualification : International Senior Welding Inspector 3.2 With RT Interpretation
Name of Institution : Sasol
Qualification : 16.2 Appointed
Boilers Course, Emergency Procedure Courses,ForkliftTrained,
Risk AssessmentEvaluation Course & Afrox
Safety Training Course.
Name of Institution : Petro SA
Qualification : (AUT) Automatic Ultrasonic Testing Data Interpretation
2. (Course Attended In Netherlands, Rotterdam).
Off –Shore Survival Course (Requires Renewal)
EMPLOYMENT HISTORY
Company : Sasol II Secunda Shut Down
Position : Representing Sasol as Welding Services Area Manager
Duration : August 2016 to September 2016 ( Project Complete)
Projects : Area Manager for the following areas Unit 001,003,009,010,
010V & 012 Managed all Sasol Welding Specialists Daily
Activities, NDT Subcontractors and Subcontracting Inspectors
Attended all Senior meetings regarding the Shut Down
Progress on a Daily bases to provide Feedback and support.
Company : TFM (DRC) Democratic Republic Of Congo
Position : Client QA/QC Supervisor
Duration : July 2015 to February 2016 ( Project Complete)
Projects : AP 2 Project over seeing off all subcontractors working on site
with regards to all new fabricated Vessels, Tanks, Heat
Exchangers and Piping, Managing all Quality Related
Activities on Site
Company : Elgin Engineering
Position : QA / QC Manager
Duration : November 2013 to July 2015
Projects : New and Repair Fabrications of Heat Exchangers, Pressure
Vessels, Tanks and Structural Steel Works
For the following Companies =
Eskom Power Stations, Sasol, Engen, Sapref, Petro SA, Shell
Refineries (Oil & Gas)
Duties and Responsibilities : Administrative Responsibilities
Responsible for profit and loss
Responsible for execution excellence
Responsible to coordinate and supervise NDT
Manage all service providers
Attend project Management meetings
Liaise with Clients, suppliers and contractors on Quality
matters
Interface with team members and Client representatives
Time Management
Develop QC Packs in accordance with code and client
specification requirements and manage right up to Clinet
handover
Place holds on any defective work until corrected or
concession granted
3. Issue NCR”s for all deviations from company, code or
Client specifications
Attend meetings internal and external
Collect Statutory and other certification
Ensure all job related documentation are signed on and off
at the appropriate stages
Record all work packs and ensure QCP”s are signed linked
to these packages with unique sequence and numbers
Perform Audits and maintain Audit reports
Ensure receiving inspection documentation is controlled
Develop and maintain systems related to Quality ( Files for
material certificates, consumable certificates, Welders
Qualifications, Welder Updates, NCR”s, Concessions etc)
Report trends related to poor Quality
Ensure all drawings are traceable as per internal
requirements
Report on outstanding Supplier / Contractors performance
related to Quality
Coordinate QC activities
Review Supplier / Contractors documentation and Data
Books for acceptability
Manage all QC Inspectors and QC Clerks
Eliminate all client concerns and attend to all client NCR”s
issued and implement corrective actions
Draw up Quality Control Plans for pressure piping,
Mechanical equipment Tanks etc
Review and approve all Subcontractor’s QCP”s &
Procedures
Technical Responsibilities
Familiarize with Departmental and Company Procedures,
plant processes, project requirements and standards
Study order packages and discuss with suppliers to ensure
agreements on inspection requirements
Perform inspections at control points specific to supplier
approved Quality Control Plans to verify product
conformance to client specifications and manufacturing
codes
Report objectively and accurately on inspection findings
Provide technical input into failure investigations and
product Audits
Company : Group Five (Oil and Gas)
Position : QA/QC Manager
Duration : November 2011 to November 2013
Project : Transnet/NMPP Terminals Project TM1 Estimated R 1
Billion Rand Project
Duties and Responsibilities :
4. Responsible for execution excellence
Responsible to coordinate and supervise NDT
Manage all service providers
Attend project Management meetings
Liaise with Clients, suppliers and contractors on Quality
matters
Interface with team members and Client representatives
Time Management
Develop QC Packs in accordance with code and client
specification requirements and manage right up to Clinet
handover
Place holds on any defective work until corrected or
concession granted
Issue NCR”s for all deviations from company, code or
Client specifications
Attend meetings internal and external
Collect Statutory and other certification
Ensure all job related documentation are signed on and off
at the appropriate stages
Record all work packs and ensure QCP”s are signed linked
to these packages with unique sequence and numbers
Perform Audits and maintain Audit reports
Ensure receiving inspection documentation is controlled
Develop and maintain systems related to Quality ( Files for
material certificates, consumable certificates, Welders
Qualifications, Welder Updates, NCR”s, Concessions etc)
Report trends related to poor Quality
Ensure all drawings are traceable as per internal
requirements
Report on outstanding Supplier / Contractors performance
related to Quality
Coordinate QC activities
Review Supplier / Contractors documentation and Data
Books for acceptability
Manage all QC Inspectors and QC Clerks
Eliminate all client concerns and attend to all client NCR”s
issued and implement corrective actions
Draw up Quality Control Plans for pressure piping,
Mechanical equipment Tanks etc
Review and approve all Subcontractor’s QCP”s &
Procedures
Technical Responsibilities
Familiarize with Departmental and Company Procedures,
plant processes, project requirements and standards
Study order packages and discuss with suppliers to ensure
agreements on inspection requirements
Perform inspections at control points specific to supplier
approved Quality Control Plans to verify product
5. conformance to client specifications and manufacturing
codes
Report objectively and accurately on inspection findings
Provide technical input into failure investigations and
product Audits
Company : Group Five (Oil and Gas)
Position : QA/QC Manager
Duration : July 2010 to November 2011
Project : Transnet/NMPP Pump Stations Project PS1 , PS3 & PS5
Estimated R 2.5 Billion Rand Project
Duties and Responsibilities :
Attend all technical review meetings to ensure all welding
aspects are covered in the meetings
Ensure correct selection of parent materials as per approved
specifications and welded joint properties
Ensure correct Quality and acceptance of welds as per code
requirements
Providing solutions to all queries with the customer’s approval
by means of raising: Technical Queries, Concessions &
Requests For Information via the clients Aconex system.
Attend all Management meetings
Ensure all welders are certified to required codes for the project
ASME IX & API 1104
Provide information on location requirements , accessibility
Problem solving of material requirements as per B31.4
Coordinate all subcontractors(NDT, Painting, C/S Tanks,
S/S Tanks, Denso, Supports, Material Suppliers etc)
Co-ordinate all QC personal
Manage 3 x Sites PS1(Amanzimtoti), PS3
(Pietermaritzburg) PS5 (Ladysmith) & Workshop regarding
all QA/QC requirements
Review subcontractor documentation & obtain approvals
from
Clients Via the clients Aconex system
Perform Audits as per the Group Five audit schdule
Raise NCR’s were & when required
Testing of welders to ASME IX & API 1104 and draw up all
welders certificates
Ensure all PQR”S &WPS”s is qualified and meets the
customer’s (NMPP) requirements.
Draw up all Quality control plans and obtain client approval
etc
Company : Group 5 (Oil And Gas)
Position : QA/QC Manager
Duration : November 2008 to July
6. Project : Sapref Refinery / Engen Refinery
Duties and Responsibilities :
Attend all Management Meetings
Review all Radio Graphic Films To Assess Welder
Performance And Obtain Approvals from AIA, Review all
Radio Graphs on fabricated and repaired welds and obtain
approvals from AIA
Draw up Inspection Test Plans And Quality Control Plans
for Vessels, Tankage & Piping And Obtain approvals from
clients(Engen/Sapref)
Perform Scheduled Audits In Regard To The Company
Quality Management Systems And ISO 9001-2008
Perform Audits On Subcontractors(NDT,PWHT,Welding
Contractors)
Review All NDT & PWHT Procedures And Verify
Required Approvals
Draw Up Method Statements For Repairs To Vessels And
Tanks
Coordinate All NDT & PWHT Related Functions And
Personnel
Monthly Tracking Of Welding Performance,Reject Rates.
Draw Up And Control Tracking Sheets For Shut Downs
And Maintenance Work
Responsible For All QC Inspectors,QC Clarks & Document
Controllers
Liaise With AIA And Unit Area Engineer’s
Control And Monitor All Registers
NCR,Welders,Calerbrations,WPS & PQR,Materials ETC
Plan and Prep for Shut Downs Phase, Pre Fab Phase &
Execution Phase.
Etc
Company : SAPREF –Shell (Moody International SA)
Position : Plant Integrity Inspector
Duration : June 2008 to November 2008
Project : Maintenance
Duties and Responsibilities : Performing ofperiodic inspections on all Equipment=Vessels, Tanks
Piping, Air Heaters, Tube Bundles etc
Data capturing inspection reports as per SAPREF data base.
Attending all meetings atlube oil plant.
Company : Shell- Moody International SA
Position : Plant Integrity Piping Inspector
Duration : June 2007 to June 2008
Project : RBI-Risk Base Inspection/CUI-Corrosion under Insulation Inspections
Duties and Responsibilities : Reporting On Pipelines, Pressure Vessels, Heat Exchangers etc
Evaluating Extent ofRisks of Defects
7. ReportWriting (As Per SaprefSystems) and API 570 Codes
Company : Abet Inspection Petro-SA (Mossel Bay)
Position : Statutory Inspector
Duration : May 2007 to June 2007
Project : Turnarounds
Duties and Responsibilities : Perform Statutory Inspections on Reactors & Hoppers
ReportWriting On All Defects Found
Reporting To Plant Mechanical Engineer
Writing Out Recommendations for Repairs
Performing Inspections as Per QCP
Company : Goss & Balfe Alfes Urainium Plant (Klerksdorp)
Position : QC Manager
Duration : January 2007 to May 2007
Project : Alfes Uranium Mine
Duties and Responsibilities : Recruiting Of QC Inspectors (As Per Job Requirements)
Checking On QC Supervisors
Allocating Work to QC Inspectors
Achieving Company Goals
Liaising With 3rd Party Inspectors
Obtaining Concessions Where NotPractical For Pressure Tests
Signing Off Complete Work
Problem Solving
Etc
Company : Abet Inspection / Petro SA (Mossel Bay)
Position : Senior QA / QC Inspector
Duration : 2005 to 2006
Projects : Extension
Duties and Responsibilities : Writing Of Quality Control Plans
Performing ofInspections
Signing Of Pipe Repairs and Work Packs as Per QCP
Company : Unit Inspection (Sasol Secunda)
Position : QA / QC & Materials Inspector
Duration : 2004 to 2005
Project : Sasol Boilers 2&3 GO Team
Duties and Responsibilities : Reporting To Sasol Group leader
Checking That Materials Comply With Codes
Stock Control of Materials
Requesting Of (PMI) Positive Material Identifications
Storage and Packing ofMaterials as Per ASME Codes
Receiving and Dispatching Off Materials
Obtaining Of Material Certs and Filling
Leasing With Suppliers
Controlling Of Required Manpower
Company : Hydra Arc Engineering & Fabrication CO (Sasol Secunda)
Position : (1) Senior Supervisor (16.2 Appointed)
Position : (2) Supervisor
8. Position : (3) Welder
Duration : 1992 to 2004
Project : Sasol Boilers
Duties and Responsibilities : Liaising With Mechanical Engineer & Group Leaders
Attending All Meetings
Recruiting Of Personal as Per Requirements
Handing Out Work to Supervisors
Achieving Company Dead Lines
Company : Steinmuller Eskom Tutuka Powerplant (Standerton)
Position : Apprentice Welder and Coded Welder
Duration : 1988 to 1992
Experience : Part of the Steinmuller GO Team and worked on the following
Power Stations
Tutuka Power Station
Kreil Power Station
Matla Power Station
Hendrina Power Station
Duvha Power Station
I also worked at the Steinmuller work shop that was based in Chamdor building the Boiler walls, burner rings,
Sling Tubes, Economizers etc
ADDITIONAL EXPERIENCE
Experienced in various computer programs
Experienced in Boilermaking
Experienced in pipe fitting
Was elected Chairman of the Equity Committee in Sasol for Hydra Arc
Received the Apprentice offthe year award for Steinmuller for Welding
Experienced with mostcodes ofconstruction & repairs
REFERENCES
Company : Sasol Secuda
Contact Person : Charl Dorfling
Tel No : 0836803234
Company : Elgin Engineering
Contact Person : Vincent Chetty (Managing Director)
9. Tel No : Work 031-2740006
Company : G5 Oil & Gas
Contact Person : Gianni Ioppo (Project Manager NMPP/Transnet Project)
Tel No : Private +27 (0)829080062 / Work 0767929175
Company : Group Five Oil & Gas
Contact Person : Pravin Laljit (Quality Manager)
Tel No : +27 (0) 78 460 3391
Company : SAPREF
Contact Person : Jay Padayachee (Quality Manager)
Tel No : 031-4801614
Cell : 082 8060 311
Company : Moody International SA
Contact Person : Keith Whitby (Supervisor)
Cell No : 083 6149 155
Company : Stainmuller Construction
Contact Person : Henry Macrate (Welding Superintendent)
Cell No : 082 0638 137
Company : Hydra Arc Engineering and Fabrication (Sasol)
Contact Person : Johan Trollip (Sasol Group Leader)
Cell No : 082 8000 441
Company : Unit Inspection (Sasol)
Contact Person : Johan Trollip (Sasol Group Leader)
Cell No : 084 5868 804
Company : Abet Inspection
Contact Person : Bill Alexzandera (Director)
Office No : 044 8735 437
Company : Goss & Balfe
Contact Person : Steven Kurns (QA/QC Manager)
Cell No : 082 7777 930
Please note all other certificates to be submitted on request, CSWIP Certificate also up dated and valid