The 1.5T medium frequency furnace is melting equipment commonly used in the foundry industry. Its rated capacity is 1.5T in steel, the melting power is generally 1000kW, and the melting speed is one furnace within 1 hour. The furnace body is tilted by hydraulic pressure or reducer, covering an area of about 10 square meters. The cooling is hsbl cooling tower.
1. 1.5 Ton Induction Furnace for Sale
The 1.5T medium frequency furnace is melting equipment
commonly used in the foundry industry. Its rated capacity is 1.5T
in steel, the melting power is generally 1000kW, and the melting
speed is one furnace within 1 hour. The furnace body is tilted by
hydraulic pressure or reducer, covering an area of about 10
square meters. The cooling method is hsbl cooling tower.
1. The Steel Shell Induction Furnace with 1.5T Power Supply
and 2 Furnace Bodies Is Composed of:
The main equipment of induction melting furnace
Series re
sonant i
KGPS-CL-1000KW/0.5KHz 1set
50 days
after the
2. ntermedi
ate freq
uency p
ower su
pply cab
inet
advance
paymen
t is recei
ved, the
supplier
shall be
respons
ible for t
he trans
portatio
n, install
ation an
d commi
ssioning
of the s
upplied
equipme
nt
2
Connecting copper
bar (with water cooli
ng)
Between intermediate freque
ncy power supply and capac
itor cabinet
1 set
3
Compensation electr
othermal capacitor c
abinet
1000KW/0.5KHz 1 set
4
Filter electrothermal
capacitor cabinet
1000KW/0.5KHz 1 set
4 water cooling cable
Between capacitance compe
nsation cabinet and furnace
body
2 sets
5 waterway
From furnace body and pow
er cabinet to water inlet an
d outlet point
2 sets
6
Steel shell furnace b
ody with the magne
GW-1.5-1000Kw/0.5KHz 2 stands
3. tic yoke
7 Hydraulic system 1.5T special 1 set
8 Crucible mould 1.5t special 1 piece
9 Water dispenser For backwater 2 sets
10 Tilting console 1set
11
Furnace leakage alar
m
2 sets
Cooling of 1.5t medium frequency furnace
1
Closed cooling towe
r
HSBL-130 Complete cooling
of induction furnace
1stands
2. Technical Parameters of Steel Shell Induction Melting Furnace with 1.5T
Power Supply and 2 Furnace Bodies
Items Unit parameters
⑴Electric furnace parameter
s
1.5T steel shell
Rated capacity t 1.5
Max Capacity t 1.8
Melting temperature ℃ 1650
⑵ Electrical parameters
Rectifier transformer capacit KVA 1250
4. y
Transformer primary voltag
e
KV 10
Transformer secondary volt
age
V 660V
Rated power of intermediat
e frequency power supply
KWA 1000
Design frequency HZ 500
Startup success rate 100%
⑶ Tilting system Hydraulic tilting system
⑷ colling water system
Cooling water flow (furnace
body)
t/h 90(single furnace body)
Cooling water flow (power
supply)
t/h 40(Single power supply)
Water supply pressure Mpa 0.2-0.35
3. Component Selection of 1.5T Induction Furnace:
1. The reactor of the 1.5T induction furnace has a coil with a
copper tube diameter of 15mm and a wall thickness of 1.5mm.
5. 2. 1.5T medium frequency furnace constant power main control
board, quantity: 1.
3. Incoming voltage of 1.5T medium frequency furnace: 6600v,
intermediate frequency output voltage: 1200V, DC voltage: 880v.
4. Heating power of 1.5T medium frequency furnace: 1000kW.
5. KK thyristor 1500A / 2000V for 1.5T medium frequency
furnace, quantity 8.
6. KP thyristor 1800A / 2500V for 1.5T medium frequency furnace,
6 in quantity.
7. Capacitor of 1.5T medium frequency furnace, specification
2000kf / 1200V, quantity 77 sets.
8. Tilting mechanism of 1.5T medium frequency furnace:
hydraulic tilting.
9. Shell of 1.5T medium frequency furnace: 1230mm in diameter
and 1350mm in height.
6. 10. Induction coil of 1.5T medium frequency furnace: copper
tube 25mm x 40mm x 3.5mm, inner diameter 730mm, 15 turns.
Contact US
Email: marketing2@hanrm.com; kerrirollingmill@gmail.com
Website: www.smeltingfurnaces.com