The document provides a summary of the applicant's employment history and qualifications. It details his experience over 15 years working as a design and installation engineer for two major engineering companies on numerous power and industrial projects around the world. Key responsibilities included electrical design engineering, site management, and project execution. The applicant holds a Bachelor's degree in Electrical Engineering and has extensive experience in layout design, cable engineering, project management, and site supervision.

1. Page 1 of 5
EMPLOYMENT RECORDS:
1.) Company: ABB Global Industries and Services Ltd. Chennai, India.
Position : Design & Installation Engineer – Substation & Electrical Balance of Plant (eBOP).
Period : May 2010 to till date (5 years 10 months)
ABB GISL is a Swiss-Swedish based MNC over 125 years in the field of
Power & Automation.
Projects Involved:
 ±800 kV, 6000 MW UHVDC Multi Terminal North East Agra Interconnector project in Assam (India’s Largest).
 Salalah Water Desalination Plant in Oman. – 69MLD.
 Tembusu Water Treatment Plant in Singapore. – 400M3 / h
 Uthai Power plant in Indonesia. —2x800 MW Combined Cycle Power Plant.
 Magtaa Water Desalination Plant in Algeria – 500MLD (World’s largest Water Desalination Plant)
 Site survey & Tender engineering of Hoa Binh Hydro Power Plant. – 8x240 MW
 Kusile Thermal Power Plant in South Africa --- 6x800 MW Thermal Power Plant.
 BMCC Power plant in Singapore. -- 105 MW Thermal Power Plant.
 Proposal / Tender engineering of Power Plants & Water desalination projects.
2.) Company : FLSmidth Pvt. Ltd. Chennai, India.
Position : Senior Electrical Engineer – Design & Installation--Electrical Balance of Plant (eBOP).
Period : July 2004 to May 2010 (5 years & 10 months)
FLSmidth Pvt. Ltd. is a Denmark based MNC over 130 years in the field of Concept of
commissioning of Cement Plants (EPC).
Projects Involved:
 Obajana Cement Plant in Nigeria.---5000 TPD
 D.G.Khan Cement Co. Ltd in Pakistan.---6000 TPD
 ACC Chaibasa Cement Plant in India. ---- 4500 TPD
 Maple Leaf Cement Plant in Pakistan.---6700 TPD
 Ciba white Cement Plant in Algeria.---1500 TPD
 Emirates cement company in UAE.---- 7500 TPD
 Ramliya Cement Plant in Egypt.--- 6000 TPD
 Hoang Thach Cement Plant in Vietnam.---3300 TPD
 Aleppo Cement Plant in Syria.--- 7500 TPD
 Ramliya II Cement Plant in Egypt.---- 6000 TPD
 Djelfa Cement Plant in Algeria.--- 5000TPD
 UC Calabar Cement in Nigeria.--- 6250 TPD
 KCP Muktyala cement in India. ---- 4000 TPD
 Dalmia cements in India. ---- 3800 TPD
 Proposal / Tender engineering of Cement Plants.
CAREER HIGHLIGHTS:
 Handled projects single handedly without any other resources during engineering at recession times.
 Given responsibility to train & develop CAD Engineers & Junior Engineers as per business needs.
 Selected from Company (FLS) sent to give training on Cable routing to Denmark engineers.
 Assisted recruitment of CAD Draughtsman’s & Junior Design Engineers including assessment, for team
building in engineering division.
 Deputed to Algeria as Site Manager for ABB PSP-Singapore and led a team of 40 peoples which
consists of 13 nos.of expatriate Site Engineers, Site Supervisors, T&C engineers and local sub-
contractors.
WORK EXPERIENCES:
DESIGN ENGINEERING PROFILE:
 Planning & Status monitoring of engineering activities and reporting to Project manager / team lead.
 Lead teams of Electrical Design Engineers and Draughtsman to execute various projects.

2. Page 2 of 5
 Attended Project Kick-off meetings and Progress meetings with Customers along with Project Managers.
 Technical Coordination with Clients, Engineering team, Site team and Sub-contractors for various
projects to ensure the progress of work done as planned & meet to the Target dates.
 Design Co-ordination / interface with Civil, Mechanical & other discipline design teams.
 Co-ordination with customers / other teams & giving inputs to Designers and junior engineers & regular follow-
up with Subordinates for status monitoring and to meet the targets & reporting to Project manager.
 Preparation & Reviewing of Overall One line /Single Line diagrams (SLD) of the project.
 Preparation & reviewing of Electrical Load list and updating the feeders as per latest load list.
i.) EQUIPMENT ENGINEERING:
 Reviewing of One/Single Line diagrams (SLD) & Schematic drawings of Switchgears.
 Conversant with CT & PT sizing calculations, Bus bar sizing calculations, Breaker, Starter & Contactor
selections.
 Preparing & Reviewing of Technical specifications / Material Requisition / RFQ & floating enquires for
Power Control Center & Motor Control Center panels, APFC panel, Battery and Battery Charger, Bus ducts
(LV).
 Design & Preparation of PCC & MCC feeder list along with its Bill of Materials & Quantity.
 Preparation & review of Data sheets for PCC, MCC, DB’s, APFC panel, DC System, Bus ducts.
 Vendor evaluation & executing the orders, Vendor drawing / document review for Power Control Center,
APFC panel, Battery and Battery Charger, Bus duct & MCC panels.
 Coordination with Supply Chain Management for procurement.
ii.) LAYOUT & CABLE ENGINEERING:
 Design, preparation & reviewing of Electrical switch room layouts & Electrical Container layouts (eHouse).
 Preparation & reviewing of Panel fixing arrangements, Earthing Layouts and Lighting Layouts.
 Design and reviewing of Cable Routing drawings, Cable Tray / Ladder layouts & interconnection diagrams.
 Design, preparation and reviewing of Overall Cable Routing in Tunnel/ Cable Gallery/ Pipe Rack, Layout of
Cable Pits and Trenches.
 Preparation of Cable list, Cable sizing documents, Cable Schedule, Interconnection Schedule &
drawings for Signal cables, Control cables, LV cables & HV cables (rated upto 33kV) for various
equipment’s in Power & Process projects.
 Selection and engineering of Low Voltage Busducts.
 Preparation of Cable Tray loading sizing & schedule documents and cable drum cutting schedule.
 Preparation of Bill of Quantity (BOQ) for Cable routing and Earthing materials.
 Got trained in Denmark for Effective Cable Engineering and to optimize the usage of Cables, Cable Tray’s
and Ladders Quantities manually & using a tool called ELECTRICAL PLANT DESIGN SYSTEM (EPDS).
 Design and review of switchboard locations in Switchrooms & LCP’s & Junction Boxes in field.
 Preparation & Reviewing of Typical Installation drawings & BOM for Cable routing & Earthing.
iii.) OTHER DESIGN ENGINEERING ACTIVITIES:
 Preparation & reviewing of Interconnection wiring documents between MCC, PLC Panels, Variable Frequency
Drive Panels & Motors and Instrument interconnection schedule & drawings.
 Proposal documents preparation & Tender engineering.
 Preparation of wiring documents for Local control Panels (LCP) and PLC Panels.
 Design Engineering of Cable tray/ladder and Cable Installation for Material Handling Stacker & Reclaimer
areas which include Linear and Circular storage & Electrostatic Precipitator (ESP).

3. Page 3 of 5
 Deputed to South Africa for Proposal Design Engineering of DCS panels for Kusile Thermal Power plant.
 Developed useful tools for standardizing the work procedures followed in the team to reduce man hours.
 Preparation, reviewing & submission of As-Built drawings.
 Selection of Motors as per Mechanical & Electrical requirement.
 Preparation of Tap Point Location documents for placing Instrumentation Equipment’s.
 Preparation of Quality control check list for Engineering drawings & documents.
 Preparation & monitoring of Document Transmittals to & from customer, sub-contractors.
 Maintained project details as per ISO certification requirements.
 Handled few projects single handedly without any other resources.
 Conversant with International codes & standards like IEC, IEEE, IS.
ON-SITE / FIELD EXPERIENCE PROFILE WHILE ON DEPUTATION:
i.) IN ALGERIA: MAGTAA PROJECT:
 Deputed to Algeria for Magtaa Water Desalination Plant (World’s largest Desalination Plant-500MLD)
as a Site Manager for ABB.
 Responsible for project scheduling, execution & reporting to ABB Business Unit HO (Singapore) & Customer.
 Planning and reporting of site activities and financial status to Management.
 Lead a team of 40 peoples which consists of 13 nos.of expatriate Site Engineers, Site Supervisors, T&C
engineers and local sub-contractors.
 Responsible for team member’s safety & OHS/HSE monitoring of ABB team & sub- contractors.
 Reporting of Unsafe conditions / unsafe acts and corrective actions taken to safety manager at Head Office.
 Reporting of Near Misses. Maintained Zero hours of LTI.
 Conducting Site safety meeting, daily Tool box meeting & reporting it to Head office.
 Attending all contractor’s safety & progress weekly meeting at site conducted by customer.
 Logistics monitoring & Man power monitoring & planning.
 Regular follow-up with Subordinates for status monitoring & update to Project Management.
 Supervision of Testing & Commissioning of 220kV AIS Switchyard/substation and its equipment’s like
115MVA Transformer, Circuit Breaker, CT, CVT, Isolator, etc.,
 Supervision of Installation, Testing & Commissioning of various panels rated 33kV, 11kV, 6.6kV,
3.3kV & 415V and Transformers.
 Supervision of Pre-commissioning checks for Transformers, MV & LV Bus ducts, MV & LV switchboards,
DC & UPS systems.
 Supervision & status monitoring of site installation activities of Cable trays, Cables, Earthing and electrical
Equipment’s installation.
ii.) OTHER Sites:
 Installation Supervisor for ±800 kV, 6000 MW HVDC Multi Terminal NEA project (India’s Largest
transmission project-customer Power Grid Corporation of India) & Supervision of 800kV DC switchyard
Bus bars & equipment installation. Preparing ABB’s internal punch points of Installation activities for
400kV AIS Switchyard and its equipment’s like 200MVA Auto Transformer, Circuit Breaker, CT, CVT,
Isolator, Busbars, Cables, Earthing & lightning protection, etc., and clearing them. Clearing of Punch
points given by customer - Power Grid Corporation of India Ltd (PGCIL).
 Deputed to Singapore (Tembusu Water Treatment Plant) to Design & guide the Cable routing and
installation of Panels, cable trays/ladders, Cables, Earthing & Lightning installations.

4. Page 4 of 5
 Deputed to Vietnam (Hoa Binh Hydro Power Plant) to conduct site survey on Electrical equipment’s,
Earthing, Substations and Cable Routing for Tender/Proposal engineering.
 Deputed to Nigeria (United Cements - Calabar) as a lead Supervisor for installation of cable trays/ladders,
Cables and Lighting, Earthing & Lightning installations.
 Deputed to Nigeria (United Cements - Calabar) to provide training to a Danish site supervisor on
ELECTRICAL PLANT DESIGN SYSTEM (EPDS), installation of cable trays/ladders, Cables and
Lighting, Earthing & Lightning installations.
 Deputed to UAE (Emirates Cement Company- EMCC) as a Supervisor for installation of Panels,
Installation of cable trays/ladders, Cables, Panels and Lighting Installations.
 Deputed to Vietnam (Haiphong Cement Plant) twice, to inspect Electrical Works done at site which includes
Lighting, Earthing and Lightning, Substations and Cable Routing.
 Deputed to KCP Cements (India-Andhra Pradesh) as a lead Supervisor for installation, Testing &
Commissioning of MCC, PCC, APFC Panels and MV & LV Bus ducts.
 On-Site Design and Modification of Electrical system to overcome the defects in engineering.
 Coordination with Client and contractor, engineering team, equipment manufacturers to ensure the progress
of work done and to maintain the progress as Planned.
 Coordination with site Civil & Mechanical departments for smooth process of Electrical activities.
 Taking Bill of Quantity at Site at regular intervals in order to monitor the status and material availability for
smooth progress of work as per design.
 FAT & SAT, Testing of panels & Bus ducts at vendor’s manufacturing place for delivery to site.
 Installation, Testing & Commissioning Supervision of LT and HT Bus ducts.
 Installation, Testing & Commissioning Supervision of Conventional & Intelligent MCC, PCC & PMCC Panels,
Automatic Power Factor Controller Panels, Battery & Battery Chargers.
 Installation of Panels/Switchboards, Transformers, Cable Trays/Ladders and Cable installation.
 Preparation of Signal List for various equipment’s and grouping them to Junction Boxes in order to connect the
signals to and from PLC panel.
 Managed difficult situations at site when electrical engineering is missed out for different equipment’s.
 Preparation of ‘As-Built Modification’ drawings at site.
 Preparation & Rectifying internal Punch Points and clearing of customer punch points.
 Co-ordination with Customer & Local Government Authorities for getting approval of our electrical
system & scope of supply.
 Identifying, Price negotiation & Work Order execution with local vendors & Tester Company’s at different
sites in different countries.
STRENGTH’S:
 Field experience to implement while design engineering.
 Strong in Layout & Cable Engineering.
ACADEMIC QUALIFICATIONS
QUALIFICATION UNIVERSITY / SCHOOL YEAR OF
PASSING
PERCENTAGE
OF MARKS
Bachelor of Engineering in Electrical and
Electronics Engineering (BE EEE- part time)
Satyabama University Chennai,
India.
November
2011
66%
Diploma in Electrical and Electronics
Engineering (DEEE)
ANNA University (DOTE),
Chennai, India.
April 2004 91%

5. Page 5 of 5
S.S.L.C Our Lady Of Vellanganni
Matriculation Hr. Sec. School.
Villivakkam, Chennai-600049.
April 2001 71%
SOFTWARE EXPOSURE
Auto CAD, E3 Smart schematic tool, Micro Station (Basic), Solid Works 3D Modelling (Basic), Documentum,
Electrical Plant Design System (EPDS-for cable engineering), MS-Office.,
PERSONAL DETAILS
Nationality : Indian.
Marital Status : Married.
Gender : Male.
Languages Known
Read, write and speak : Tamil, English.
Permanent Address : Chennai, India.