1. ELECTRICAL ENGINEER RESUME
P a g e 1 | 3
Radheya Ravindra Karmarkar [B.E. –Electrical]
Email ID- radheya2631992@gmail.com
Hand phone- +91 9619692691
DOB:-26th March, 1992.
OBJECTIVE
Quest to work in professional atmosphere, which will help me to imbibe as well as impart knowledge about the latest technolog ies in the
world of engineering by virtue of my sincerity, diligence and dedication. I intend to contribute positively towards the growth and
prosperity of the company as I sharpen myself simultaneously.
APPLICATION ENGINNERING EXPERIENCE (Since July 2016)
TOSHIBA-MITSUBISHI ELECTRICAL INDUSTRIAL SYSTEMS INDIA PRIVATE LTD
Selection of MV Motors and MV Drives as per application suitability.
Preparing Technical proposal in line with selected MV Motor and MV Drives and customer specification.
Coordinating with Client/PMC and within departments to customized the selected product or in case of development of
product technology to simplify operational & cost effective solution
Estimates & Optimization during tendering stage to support customers in budgeting approvals.
Preparing energy saving calculations.
Dealing with vendors & subcontractors for brought out items like switchgears, execution contractors to finalize orders by
evaluating credentials of vendors.
To support the project engineering and execution team in approval and commissioning stages .
Experience in working in latest engineering software tools like Visio, Intelligent quotation systems & Oracle based
systems.
JOBS HANDLED
Sr No Clients and Enquiries Roles and Responsibilities
1 JSW Steel and Cement 1. Selection of products by defining the application requirements like
Boiler feed water pumps, condensate extraction pumps, cooling water pumps
,Induced draft fans , Forced draft fans, Centrifugal / reciprocating
compressors,sugar mills, kilns, extruders, roller press mills, crushers etc. in
Steel, Power , Oil and gas , petrochemicals , Water ,Fertilizers, Sugar & food
industry .
2. Selection & Preparation of medium voltage active front end/ diode front
end Voltage source inverter drives based on application and applying
engineering tools and evaluation. Applying energy saving calculations by
understanding processes.
3. Selection & Preparation of proposal for safe/hazardous area
horizontal/vertical medium voltage motors with water cooled/air cooled
cooling methods.
4. Experienced on working with water cooled drives selection and
proposals.
5. Experienced in engineering calculations of selections of drives as soft
starters and applying different schemes bumpless transfer, output reactor
selections and precharge requirements.
6. Well versed with selection of switchgear and applying the different
switchgears power and control schemes for MV drives.
7. Well aware about drive and motors testing methods, principles at
factory and sites.
8. Selection and calculations of transformer sizing for converter duty
transformers. Well versed with dry type /oil cooled, open delta/ phase shift
transformers constructions,testing methods etc.
9. Hands on calculating Air conditioning requirement selections.
10. Working experience on Load Commutated Inverter drives
upgradation.
2 BHEL
3 Aditya Birla
4 IOCL
5 Ultratech
6 FLSmidth
7 Linde India
8 Air Products
9
Deepak Fertilizers and Petrochemicals
Limited
10 Rashtriya Chemical Fertilizers
11 Tata Steel
12 Vikram Cement
13 Black & Vetach
14 SKS Ispat and Power co.
2. ELECTRICAL ENGINEER RESUME
P a g e 2 | 3
15 Bangalore water supply corporation 11. Selection and preparation for synchronous motors excitation and
protection schemes with relay co-ordination study.
12. Strategic planning experience on evaluating tender/ enquiry
performance guaranteed figures and defining them in justified formats
with comparison to competitor’s values and calculating losses in reverse
manner.
EPC EXPERIENCE
SAVAIR ENERGY LIMITED, NAVI MUMBAI (Since July 2013)
Generating datasheets & technical documents of projects as per IS/IEC standards & its approval from client, PMC
Preparing BOQ/MTO as per tender drawings & techno-commercial comparison by visiting the sites
Coordinating with Client/PMC and within departments to resolve bottleneck
Estimates & Optimization during tendering stage
Preparing SOQ & SOR for finalizing the services
Dealing with vendors & subcontractors to finalize orders by evaluating credentials of vendors.
To support the drafting with technical back-up.
Design & documentation as per ISO quality systems
PROJECTS HANDLED
Sr No Project Name Responsibilities
LSTK JOBS EXECUTED 1. Selection & Preparation of Motor (IS-325/IEC-60079), cable (IS-7098/IS-
1554), Switchboards & starter panels with type-2 co-ordination (IEC-
600947) drives datasheets.
2. Preparation of Load list & Single line diagrams.
3. Hazardous area equipment selection(OISD-113,IS-5571)
4. Preparation of Power & Control schematics along with logics.
5. Preparation of Lighting layouts & Lighting calculations.(IS-6665).
Performed lighting calculations in DIALUX.
6. Preparation of earthing layout & earthing calculations.(IS-3043)
7. Preparation of electrical cable routing (IS-1255), cable tray selection
(IS-6746, ASTM E-84) & equipment layout.
8.Preparation of purchase specifications for hazardous area equipment’s,
cables & MV feeders
9. Preparation of cable schedule & cable sizing calculations.
10. Designing of Safe area & hazardous area panels in consultation with
panel manufacturers & interfacing of panels with plant automation
system.(BIS-4941/BIS-587)
11. Preparation of electrical substation layouts (OISD-147)
12.Performed HT & LT Motor, Panels (Hazardous area/ safe area) & cable
testing(IS-10810) & commissioning at vendors place as well as at sites
during commissioning
13. Performed Feeder modifications to change existing Trafo- feeder of
6.6kV to motor –feeder so as to make it suitable for VCB at site during
commissioning.
14. Selection & Sizing of transformers (IS-10028), capacitor banks,
battery sizing,UPS (IS-7204).
15. Performed Detailed engineering on PLC.(IEC-61508/IEC-61511)
I/o selections, PLC architecture, logic diagrams & P&ID, calibration of
instruments, instrument datasheets,
16. Performed DCS interfacing for Emerson Delta-V & Siemens S7-300
PLC at ONGC Heera Platform.
1
Installation of IA/UA Screw
Compressor at ONGC Neelam &
Heera Platform
2
Installation of Centrifugal air
compressor at ONGC APU area Uran
3
Laying of fire water network at
ONGC Hazira
4
Balance of work for installation of
BOG Booster Gas Compressor at
Petronet LNG Kochi
5
Installation of BOG Booster gas
compressor at RGPPL- Dabhol
6
Installation of standby flare gas
recovery compressor at ONGC Uran
( Currently working as Lead
Electrical Engineer )
7
New Drinking water network at
ONGC Hazira ( Currently working
as Lead Electrical Engineer )
8
Supply& installation of 6.6KV HT
Motor at ONGC Hazira (As a
project –Coordinator)
COMPRESSOR PACKAGING EXPERIENCE
9
Gas compressor Packaging for HAL
offshore limited ( As a lead Electrical
Electrical Engineer for Packaging
system )
B ESTIMATIONS EXPERIENCE
1
Ahmadabad Asset Gas compressor
Package Project (Project Estimate -88
3. ELECTRICAL ENGINEER RESUME
P a g e 3 | 3
Cr , Electrical Estimate -12Cr) 17. Performed engineering & construction ofinterfacing the electrical &
instrumentation panels with hot & cold loop testing.
18. Performed engineering on F&G system (IS-2189) like selection
calculation, installation of F&G detectors,manual call points,PAGA
System, telephone system.
19. Experience on deciding billing weightage values of drawings, materials
& construction activities, understanding of planning schedules.
20. AS BUILT drawings dossier preparation.
21. Preparation of Enquiries during estimations, attending the pre-bid
meetings, performing the value engineering by explaining the different
value analysis to the clients.
22. Completing the BOQ’s & costing and performing optimizations by
giving counter rates to vendors & through negotiations.
23. Performed Gas compressor packaging as a lead electrical engineer &
as a company representative for authorized packager for GE- Cameron
Packager.(API-619)
24. Vendor evaluations by visiting manufacturing units, assessing quality
reports & checking documentations & credentials.
25. Played a role Project Coordinator for a small project through which
completed jobs like contract signing,Engineering approvals, vendor &
client co-ordinations, statutory requirements like CCOE &DGMS,
billing planning, accounts & insurance related jobs.
2
Replacement of Sulphur recovery unit
at ONGC Hazira(Project Estimate-
70Cr , Electrical Estimate-7Cr)
3
Up-gradation of firefighting systemat
ONGC Mehasana Asset (Project
Estimate-120Cr, Electrical Estimate-
14Cr)
MAJOR ACHIVEMENTS
Completed & handover of Atlas Copco make Screw Air Compressor in ONGC -Offshore project, Ingersoll Rand make
Centrifugal Air compressor (ONGC-Uran) & Booster Gas compressor (Petronet LNG) as a lead electrical engineer
by involving in engineering & construction of electrical installations.
Completed the Handover of by involving in commissioning stage
Worked on Pre-tendering stage of Booster Gas compressor (Petronet –LNG) & Up-gradation of Drinking water network
(ONGC-Hazira) electrics for balance of services resulted in award of work.
Completed successful commissioning of 3.3kV MV drive for FD fan application in Deepak Fertilizers and
Petrochemicals.
Completed the technical and commercial proposal part of SKS Ispat and res olved all queriers raised by client resulting in
4 Nos 6.6kV 1200kVA MV drives order.
KEY SKILLS
Monitoring and measuring performance
Ability to prioritize between enquiries & projects
Ability to pre-plan & ensure continuous input at grass root level to run a business
An ability to build relationships and establish rapport quickly with the concerned people
Sense of estimate, knowledge of costing & negotiation with vendor, industrial contacts
Result oriented work methodology
Well versed with engineering software-Visio, Oracle , Intelligent quotation systemplatforms, AUTOCAD
& Microsoft Office
DECLARATION
I hereby solemnly affirm that the particulars furnished above are true to the best of my knowledge. I will make it my earnest
endeavor to discharge competently and carefully the duties you may be pleased to entrust with me.
Date:-
Place: - Radheya R Karmarkar