Creations Engineering offers HVAC, Electrical,Plumbing(Design & Drafting) courses for fresh Mechanical, Electrical and Civil Engineers and Experienced Engineers. If you are looking for MEP Training in Chennai. Call Us : 9940467226 / 9043067226 100% Job Placement For MEP Training Course. Hurry...!!!

1. Creations Engineering Academy
An ISO 9001:2008 Certified
Head Office: No: 17, 1st Floor, Kamarajar salai, Manali, ch-68 | Near Indian Oil Petrol Bunk.
Branch Office: No.1204, 2nd floor West end colony, Anna Nagar West Ext., Mogapair. Chennai-50.
Ph: 044-25941202, Cell: +91-9940467226 / +91-9043067226
Email: creationsengineering@gmail.com | Website: www.creationsengineering.com

2. MEP is Mechanical, Electrical and Plumbing services
(MEP) is a significant component of the construction Supply
chain.chain.
MEP design is critical for design decision-making, accurate
documentation, performance and cost-estimating, Construction
Planning, managing and operating the resulting facility.

3. MECHANICALMECHANICALMECHANICALMECHANICAL
ELECTRICALELECTRICALELECTRICALELECTRICAL
PLUMBINGPLUMBINGPLUMBINGPLUMBING

4. HVAC
MECHANICAL
PLUMBING
FIRE
FIGHTING

5. What is HVAC ?
HVAC – Heating, Ventilating, and Air conditioning
The main purpose is to provide the people workingThe main purpose is to provide the people working
inside buildings with “conditioned “ air so that they will have a
comfortable and safe environment.

6. HVAC is the technology of indoor and vehicular
environmental comfort. Its goal is to provide thermal comfort,
and acceptable indoor air quality.
HVAC system is a sub discipline of mechanical engineering ,
based on the principles of thermodynamics, fluid mechanics,
What is HVAC ?
based on the principles of thermodynamics, fluid mechanics,
and heat transfer.
HVAC is important in the design of medium to large industrial
and office buildings such as skyscrapers and in marine
environments such as aquariums, where safe & healthy
building conditions are regulated with respect to temperature
and humidity, using fresh air from outdoors

7. HVAC Standards?
ASHRAE
(American Society of Heating, Refrigerating, and Air-
Conditioning Engineers)Conditioning Engineers)
SMACNA
(Sheet Metal and Air conditioning Contractors National
Association)

8. HVAC Main components
Ducts
Air outlets
Air conditioning unitsAir conditioning units
Fans
Cooling water system

9. HVAC Calculations
Cooling load calculations
Ducts sizingDucts sizing
Pressurization calculations
External Static Pressure calculation
Chilled water pipe sizing calculations

10. Plumbing
Plumbing is the system of pipes, drains fittings, valves,
valve assemblies, and devices installed in a building for the
distribution of water for drainage, heating and washing, anddistribution of water for drainage, heating and washing, and
the removal of waterborne wastes, and the skilled trade of
working with pipes, tubing and plumbing fixture in such
systems.

11. Plumbing
Plumbing
Drainage
Water
Supply

12. Water supply
A water supply system is a system for the
collection, transmission, treatment, storage and
distribution of water from source to consumers,
for example, homes, commercial establishments,
industry, irrigation facilities and public agencies
for water—related activities.

13. Drainage
Generally all the wastage water from all the floors
are being driven out from the building through theare being driven out from the building through the
main drainage pipes, and that main pipe is
connected to the “MUNCIPALITY” lines.

15. Plumbing Standards?
BS
(British standard)
ASME
(American Society Of Mechanical Engineers)

16. Plumbing components
Pumps - Booster pump, Transfer pump, Circulation pumps
Pressure Vessel
Water Tanks - Under ground tank, Over head tank
Sanitary Fixtures
Valves
Pipes- Cold water, Hot water, Hot water Return

17. Plumbing Calculations
Water Demand calculation
Water Tank sizing calculations
Drainage flow rate calculation
Septic Tank calculation
Pump Head calculation
Pressure Vessel sizing calculation
Water pipe sizing calculations
Water Heater calculation
Rain Water sizing calculation
Manhole calculation
Lifting station calculation
Interceptors sizing calculation

18. Fire Fighting
Fire fighting is the act of extinguishing fires. Firefighting is
a highly technical skill that requires professionals who havea highly technical skill that requires professionals who have
spent years training in both general firefighting techniques
and specialized areas of expertise.

19. What is Fire?

20. Fire Fighting Standards?
NFPA - (National Fire protection Association)

21. Fire Fighting components
Pumps - Jockey pump, Electrical pump, Diesel pumps
Zone control valve
Fire Water TankFire Water Tank
Sprinkler System
Hose Reel System
Fire Extinguishers
Fire Hydrant system
FM-200 system

22. Light hazard
ordinary hazard group-1
Occupancies
Class - A
Class - B
Commodity
ordinary hazard group-1
ordinary hazard group-2
Extra hazard group-1
Extra hazard group-2
Class - B
Class - C
Class – D
Class - K

23. Sprinkler System
Sprinkler system means a system of piping designed in accordance
with fire protection engineering standards and installed to control or
extinguish fires. The system includes an adequate and reliable waterextinguish fires. The system includes an adequate and reliable water
supply, and a network of specially sized piping and sprinklers which
are interconnected. The system also includes a control valve and a
device for actuating an alarm when the system is in operation.

24. Pendant Head
Upright HeadUpright Head
Concealed Head
Sidewall Head
3/24/2018PRABAKAR.G

25. Sprinkler Bulb Rating

26. Fire Extinguishers
A portable device that discharges a jet of water, foam, gas, or other
material to extinguish a fire.

27. A fire hose is a high-pressure hose that carries water or other fire
retardant (such as foam) to a fire to extinguish it. Outdoors, it
attaches either to a fire engine or a fire hydrant. Indoors, it can
Hose Reel System
attaches either to a fire engine or a fire hydrant. Indoors, it can
permanently attach to a building's standpipe or plumbing system.
Hero of Alexandria invented it and based it on Ctesibius' double
action piston pump

29. Creations Engineering Academy
Head office: 17, 1st Floor, Kamarajar Salai, Manali, Chennai-68.Head office: 17, 1st Floor, Kamarajar Salai, Manali, Chennai-68.
Ph: 044-25941202.
Branch Office: 1204, 2nd Floor West end colony, Anna Nagar
West extn., Mogappair, Ch-50.
Website: www.creationsengineering.com
Email us: creationsengineering@gmail.com
Call or Whatsapp us: +91-9940467226 / 9043067226