1. Curriculum Vitae
Baij Nath Singh
( Mechanical CAE Engineer with M.Tech- Machine Design)
Mobile: +919711743658/9953236301
E-mail: singhbaij03@gmail.com/baijns_iitk@yahoo.in Experience : 4.9 years
Summary:
• Working as Engineer in Energy Domain (CAE/FEA) Altran Technologies India Pvt Ltd.
• Working on safety transfer operation (spent nuclear fuel safety transfer operation) of
nuclear cask from one IFSCI to HSM for AREVA Inc.
• Possessing strong analytical skills using hand calculation and using softwares like
ANSYS, ABAQUS.
• Domain Expertise in Linear & Non-linear FEA of automotive Hyper-elastic, isotropic and
sheet metal components using ABAQUS and Ansys.
• Worked as Free Lancer from August 2013 to Mar'14 on Hypermesh, Abaqus and Ansys
(Workbench & APDL) on major of the projects from students and various industries.
• Working on smart composite structures.
• Took Training at IIT Kanpur on experimental modal testing- NVH(Vibration & acoustics)
analysis, modal and Hammer testing analysis(PSD)-Modal test consultant, Labshop of
Pulse 18.1
• Carry out experimental analysis of FEA simulated structure to get the appropriate picture
of result obtained using FEA
• Composite analysis and hand calculation for stress and strain analysis(CLT)
Education:
• M.Tech (Mechanical Machine Design) 81.8% BIT Sindri 2013
• B.Tech (Mechanical Engineering) 60.5% NIET Gr. Noida 2010
Academic Project:
• B.Tech-‘Fabrication of Vehicle Differential Control System’ with an objective of getting
out vehicle’s wheel stuck in mud or ice pothole by using extraordinary mechatronic
techniques.
• M.tech-“Effect of Clearance fit on composite single lap bolted joints” FEanalysis
pertaining to analysis of wing and fuselage bolted joint structures using ABAQUS and
Hypermesh
Trainings & Experience:
Certifications:
 ABAQUS®/CAE: M.Tech thesis works from NAL, Bangalore & worked on “Effect of
Clearance fit on composite single lap bolted joints”
• Training on Contact & Convergence using Abaqus/Standards from Dassault system India
Pvt Ltd, Gurgaon & Training on Hex,Tetra and quad meshing strategies using
Hypermesh from Altair India Delhi
 Certification course on Unigraphics NX4, NX7.5, Catia V5 –Part, sheet, assembly, drafting and
machining, sheet metals DMU kinematics
Experience & R&D:
Current Company : Altran Technologies India Pvt Ltd
Designation : Engineer (CAE/FEA)
Location : Noida
Tools used : Ansys, Analytical calculation using AISC 13 Edition, ASME
Role : To conduct CAE analysis and Calculations for customers
Duration : Jun 2016 to Till date
 Project Title worked on:- Skid Tie Down Assembly and Cask Restraint system Evaluation
 Carried out the structural analysis of the above components under normal and
accidental loading
 Strong analytical calculation skills
 FEA analysis of skid tie down assembly using ANSYS (APDL)

2.  The welds between the tie down support plate and the Ibeam is analysed
manually (analytically) considering it as a line.
 Minimum engagement length of the bolt and HSM is calculated analytically.
 The strength of bolt as per AISC 13th
Edition under normal and accidental
loading condition is calculated analytically.
 The preload and slippage between the bolt is calculated manually.
Previous Company : Anand Motor Products Pvt Ltd
Designation : Assistant Manager(CAE/FEA)/Project Manager
Location : Gurgaon
Tools used : Hypermesh, Abaqus, Catia V5
Role : To conduct CAE analysis of automotive parts for different customers
and OEM
Duration : October 2014 to June 2016
 Project: Worked on real time project work on stress analysis of isotropic and hyper-elastic
automotive parts-Bushes, Strut Mounts, Bump Stopper, Torque rods etc
 Assisting in Design of various automotive components for different OEM’s and various
national and International customers.
Project 1. Analysis of TATA Bump-stopper
 Work
o Meshing and solving Hyper elastic rubber bump- stopper for structural
strength analysis using Abaqus
o Preprocessing and Post processing of cad models of Tata Bump-stopper
was carried out in ABAQUS
o The TATA Bump-Stopper was tested for 700Kg load
o Load-Displacement curve is deduced
o Results were validated with experimental results
Project 2. Analysis of AMW Torque Rod
 Work
o Meshing and Solving structure strength by using Hypermesh and Abaqus
o Static analysis was carried out to calculate Von-Mises stress distribution
of Torque rod
o Modeling was carried out in Catia V5 as per the customers’ requirements
Previous Company : Department of Mechanical Engineering IIT Kanpur
Designation : Project Scientist
Location : IIT Kanpur
Tools used : Hypermesh, Abaqus, Catia v5, Pulse 18.1(MTC and Labshop)
Role : To conduct CAE and Experimental analysis & Validation
Duration: March 2014 to September 2014
 Project: Worked on real time project work on stress analysis and vibration diminishing
analysis of composite plates and isotropic plates
 Assisted IITK students to conduct CAE analysis using ABAQUS and Hypermesh, composite
laminate preparation(Continuum shell and solid) and post processing techniques
 Giving lectures to the intern regarding vibration and mode localization, CAE and experimental
analysis
 Mode localization of composite and isotropic plates on clamped and simply supported
condition.
 Validated mode shape and modal frequency of isotropic plates (aluminum and steel) using
CAE Abaqus with experimental analysis.
 DST Project worked on:-
o Use of mode localization for quieter panels of superstructure in stealth
ship March’14 – Sep’14
o Guide: Dr. Shakti S. Gupta, Associate Professor, Department of
Mechanical Engineering, IIT Kanpur (U.P.)
o Project sponsored by Naval Science & Technological Laboratory-DRDO;
mentioned as featured research on new website of IITK
Experimental
 Performed modal testing experiments to obtain natural frequencies for rectangular aluminum

3. plate with boundary conditions: (i) all sides free, (ii) clamped on one side and (iii) clamped on
all four sides
 Visualized mode localization after fixing a mass in domain of plate and conducting modal
testing
 Extracted elastic properties of Aluminum by performing tensile test experiment
 Performed forced vibration experiments on GFRP composite plates using modal shaker
Computational
 Verified experimental results by modeling the plate as a continuum shell and solid model in
ABAQUS.
 Extracted frequencies of vibration of aluminum plate using Galerkin projection method using
MATLAB
Previous Company : National Aerospace Laboratories Bangalore CSIR
Designation : Research intern CAD/CAE Engineer trainee
Location : Bangalore
Team : 1
Guide : Manisha M Banker
Job Profile:
 Worked as a Research Intern-CAE Engineer at National Aerospace Laboratories, Bangalore on
“Effect of Clearance fit on Composite Bolted joints using ABAQUS” under Advanced Composite
Division.
 Experienced in Stress & Strength Analysis of single lap composite bolted joints using
ABAQUS®/CAE at NAL, Bangalore from August 2012 to July 2013
 Project Title worked on:- Effect of clearance fit on composite single lap bolted joints
 Preprocessor,Solver and Post-processor used- ABAQUS®/CAE & Hypermesh– The list of
expertized gained are:
o Stress and Strength analysis of bolted joints when clearance ranges between bolt
hole and bolt is increased.
o Analysis of protruding head and countersunk bolted joint in metallic and composite
plate and their comparisons
o Failure modes prediction in bolted joint connections
o Domain expertise in Composite laminate theory dealing with design and
analysis of laminates(ABD matrix calculations)
Previous Experience:
Company : CIMFR DC CSIR
Designation : Project Assistant Level II
Location : Digwadih Dhanbad
Team : 4 Team Members
Job Profile:
 Worked as Project Assistant Level II at Central Institute of Mining &Fuel Research (CIMFR-
CSIR) in coal gasification division in project No.NWP-0021 from Mar 2011 to Aug 2011.
 Great Team player worked on Utilization of coal to generate gaseous product (Syngas)
(CO+H2) and its utilization to generate power and to run steam turbine (Dual cycle process).
 Worked on CFD modeling of PFBG reactor section using Ansys Fluent.
I.T. Skills & Hobbies:
Microsoft Office: Excel applications and graph plotation, PowerPoint and Word, net surfing,
Internet Savvy, Playing Cricket, Volleyball, Basketball, Bike-riding, blogging, listening soft music,
Personal Information:
Address:S1-202, Eldeco Aamantran Noida, UP-201301
DOB: 28th
Sep 1985
Fathers Name: Atma Ram Singh
Marital Status: Married
Skype Id : vinitsingh03
Passport : Available
Nationality : Indian
Declaration:
I hereby declare that the above-mentioned information is correct up to my knowledge and I bear
the responsibility for the correctness of the above-mentioned particulars.

4. Date:
Place: Noida Baij Nath Singh