1. SETTY.PRAKASH
Email: prakash.setty015@gmail.com
prakashchema@gmail.com
contact number:+91-9611808980,+91-9717930108
Summary of Experience
• 4.4years of experience in automotive domain and heavy engineering with respect to FEA.
• Received training for macros, deck setup (Abaqus), contacts, etc. at Hella Germany.
• Provided FEA support for Honda projects at Hella Germany.
• 21Days onsite experience at Hella India Automative private Lmt ,Lippstadt Germany
Specific Expertise
• Static Analysis, Modal Analysis.
• Creating non linear contacts using Abaqus.
• Having good experience in shell, tetrahedral and hexahedral meshing.
• Extensively worked on hyper mesh for various products like large mining trucks, track type
tractors & two wheeler frame body, Cooling Value Actuator.
• Strong visualization, creative and analyzing skills.
• Involved in basic concepts of design development and Implementation.
• Strong analyzing and technical skills.
Work Experience
• Hella India Automotive Private Limited, Gurgaon-Haryana. (May 2014 to present)
• CAE-Engineer Sphinx Worldbiz Ltd. Onsite job in Hero Motocorp Ltd. Dahruhera, Gurgaon as
CAE-ENGINEER. (May 2013 to March 2014)
• Nove Global Technology Pvt. Ltd. Bangalore, onsite job in AXIS IT&T LTD Hyderabad. (March
2012 to March 2013)
Education Details:
• B.E in Mechanical engineering from PDIT Hospet, Karnataka under Visveswaraiah
Technological University, India with an aggregate of 60%in 2011.
Skills Summary:
Meshing tools Pre-processing Hyper mesh, V 8, 9,10,11,12.
Analysis toolsSolving Nastran, Abaqus.
VisualizationPost-processing Abaqus, Hyper view.
Design Tool UG,NX
Responsibility
• Regularly interacting with client and updating the weekly improvement of the
project.
• Inputs collection like Loads & Boundary conditions and Material properties.
1

2. • Report and quality check sheet preparation for the project as per the company
• Reporting observations, preparing the detailed analysis report including the
suggestions for the design modifications if required.
PROFESSIONAL EXPERIENCE : Hella India Automotive Private Limited
Project Description:
Scope of project is meshing of the Standard Hero Moto corp. two wheeler frames with
the help of Weld drawings provided by the client. Entire mesh is of 1D, 2Dand 3D Quality
was done as per the hero standards.”Leap 20 frame Body Modeling in tetra meshing with
weld Beeds and also I did some post processing in nastran (Liner Static, FRF, and Modal
Analysis Models Sari Gauged, Carrier model, FRF (Frequency Response Function), Frame
Body linear static Analysis. Modeling Fixture Component total tetra Meshing connection
analysis. Meshing in Pleasure Engine parts with (REB2 and REB3, beam Element in
Nastran) Post Process in Nastran LINEAR STATIC.
3 Project Name: 797F Truck Frame
Client CATERPILLAR
Organization Axis IT&T Ltd, India
Software HYPERMESH AndAbaqus Module: Heavy Engineering.
1.Project Name Structural analysis of APS
Customer Daimler & Chrysler USA, Nissan, Renault, Maruti, Tata Motors, Honda,PSA
Germany.
Role /
Responsibilities
FE-Modelling (1D,2D,3d,mesh) as per HIA Standard guidelines, Defining
Boundary Conditions, Load application, Report Preparation & design
optimisation.
Description To check whether the accelerator pedal sensor can take the load as per
customer specification or not. Structural analysis has been done for the
Operational, Reverse and Lateral directions.(MAT:PA66 GF40 )
Also optimised design has to be suggested.
Tools Used Abaqus, Hypermesh, AbaqusViewer
1A.Project Name Random & Response Analysis of WGA (Waste gas actuator)
Customer Renault Germany, Honda in Japan
Role /
Responsibilities
FE-Modelling (Tet. mesh) as per HIA Standard guidelines, Defining Boundary
Conditions, Load application, Report Preparation & design optimisation.
Description Random and response analysis of waste gate actuator. To check the modes for
PSD and find out state of resonance
Tools Used Abaqus, Hypermesh, AbaqusViewer, Hyper view.
2

3. Project Description:
Scope of the project is to mesh the standard Frame as per the weld criteria
requirement of Caterpillar standards. FEA model was created with the hex-mesh,
shell-mesh as well as the tetra mesh and embedding wherever required. G-load
cases are prepared for LCF and HCF and stresses are compared with Endurance of
the weld and parent material, Yield limits and modal analysis of the structure and
studying the mode shapes of the first 10 modes. After structure is passing necessary
criteria results were shared with the client through final report preparation.
4 Project Name: 793F_Truck Body Modeling
Client CATERPILLAR
Organization Axis IT&T Ltd, India
Software HYPERMESH AndAbaqus Module: Heavy Engineering.
Project Description:
Scope of the project is to perform FEA-modeling for 793F_Truck meshing1D, 2D, 3D,
(Shell coating Pay Load) and to maintain weld splits as per CAT standards. Quality
was done as per the Caterpillar standards in the series (773F, 774F, and 777F)
Project Description:
Centre of excellence project from Caterpillar. Scope of work is to perform the BJA
meshing (cone of compression) for the 10 bolts of different diameter which supports the
bracket attached to the hydraulic tank by creating the contacts between the bolt-head
and washer as well as the abutments and applying the pretension at the shank region
for probing the stress. To run the modal analysis of the structure and studying the mode
shapes of the first 10 modes and connection.
5 Project Name: 775G_BJAModeling (Bolted joint analysis)
Client CATERPILLAR
Organization Axis IT&T Ltd, India
Software HYPERMESH And Abaqus Module: Heavy Engineering.
3

4. Project Description:
Worked is on FEmodelingof the cab. Weld split criteria is maintained as per the caterpillar
standards. Mesh is the combination of the Shell mesh, Hex mesh and the Tetra mesh.
Connectivity is given by observing the geometry carefully.
8 Project Name: Blade and the Adapter Assembly.
Client CATERPILLAR
Organization Axis IT&T Ltd, India
Software HYPERMESH AndAbacus Module : Heavy engineering
Project Description:
Scope of work is meshing of the Standard blades along with the adapter with the help of
weld drawings provided by the client. Entire mesh is of the tetrahedral mesh Connection
with REB2 and REB3, Beam Elements.
Declaration:
I hereby declare that all the above furnished information is true to my belief and knowledge.
Regards,Address,
Prakash.setty,S/O S.Mallikarjuna,
Idapanoor (post),
TQ Raichur (dist),
PIN: 584140
6 Project Name: CAB meshing
Client CATERPILLAR
Organization Axis IT&T Ltd, India
Software HYPERMESH AndAbaqus Module: Heavy Engineering.
4