SlideShare a Scribd company logo

Ppce unit 2- PROCESS PLANNING ACTIVITIES

•
•
Aravind Ra
Aravind Ra

Planning is deciding in advance what to do, how to do it, when to do it, and who should do it. This bridges the gap from where the organization is to where it wants to be. The planning function involves establishing goals and arranging them in logical order.

Engineering
1 of 58
Download to read offline
ME6005 PROCESS PLANNING AND COST ESTIMATION
• UNIT I INTRODUCTION TO PROCESS PLANNING • UNIT II PROCESS PLANNING ACTIVITIES • UNIT III INTRODUCTION TO COST ESTIMATION • UNIT IV PRODUCTION COST ESTIMATION • UNIT V MACHINING TIME CALCULATION
SELECTION OF QUALITY ASSURANCE METHOD The planned and systematic activities implemented in a quality system so that quality requirements for a product or service will be fulfilled.
SELECTION OF QUALITY ASSURANCE METHOD
BASIC QUALITY STRATEGIES
SEVEN STATISTICAL TOOL OF QUALITY (Q-7 TOOLS)
Flowchart
Checksheet
Histogram
Pareto diagram
Cause & Effect Diagram
Scatter diagram
Control Chart
CONTROL CHART FOR VARIABLES
MEASUREMENT INSTRUMENTS
SELECTING MEASURING INSTRUMENTS • Accuracy • Linearity • Magnification • Repeatability • Resolution • Sensitivity • Stability
Ppce unit 2- PROCESS PLANNING ACTIVITIES
Ppce unit 2- PROCESS PLANNING ACTIVITIES
Ppce unit 2- PROCESS PLANNING ACTIVITIES
Ppce unit 2- PROCESS PLANNING ACTIVITIES
Ppce unit 2- PROCESS PLANNING ACTIVITIES
Ppce unit 2- PROCESS PLANNING ACTIVITIES
Ppce unit 2- PROCESS PLANNING ACTIVITIES
Ppce unit 2- PROCESS PLANNING ACTIVITIES

Recommended

PPCE unit 3 (ME8793 – PROCESS PLANNING AND COST ESTIMATION)
PPCE unit 3 (ME8793 – PROCESS PLANNING AND COST ESTIMATION) PPCE unit 3 (ME8793 – PROCESS PLANNING AND COST ESTIMATION)
PPCE unit 3 (ME8793 – PROCESS PLANNING AND COST ESTIMATION) TAMILMECHKIT
 
Cmm 3
Cmm 3Cmm 3
Cmm 3S.DHARANI KUMAR
 
COORDINATE MEASURING MACHINE
COORDINATE MEASURING MACHINECOORDINATE MEASURING MACHINE
COORDINATE MEASURING MACHINEarunkumar6836
 
Chapter 3 CNC turning and machining centers
Chapter 3 CNC turning and machining centersChapter 3 CNC turning and machining centers
Chapter 3 CNC turning and machining centersRAHUL THAKER
 
Process planning and cost estimation unit v
Process planning and cost estimation unit vProcess planning and cost estimation unit v
Process planning and cost estimation unit vs Kumaravel
 
FORM MEASUREMENTS
FORM MEASUREMENTSFORM MEASUREMENTS
FORM MEASUREMENTSravikumarmrk
 
PPCE Unit 5
PPCE Unit 5PPCE Unit 5
PPCE Unit 5Aravind Ra
 
Cnc cutting tools
Cnc cutting toolsCnc cutting tools
Cnc cutting toolsRakesh Raki
 

Recommended

PPCE unit 3 (ME8793 – PROCESS PLANNING AND COST ESTIMATION)
PPCE unit 3 (ME8793 – PROCESS PLANNING AND COST ESTIMATION) PPCE unit 3 (ME8793 – PROCESS PLANNING AND COST ESTIMATION)
PPCE unit 3 (ME8793 – PROCESS PLANNING AND COST ESTIMATION) TAMILMECHKIT
 
Cmm 3
Cmm 3Cmm 3
Cmm 3S.DHARANI KUMAR
 
COORDINATE MEASURING MACHINE
COORDINATE MEASURING MACHINECOORDINATE MEASURING MACHINE
COORDINATE MEASURING MACHINEarunkumar6836
 
Chapter 3 CNC turning and machining centers
Chapter 3 CNC turning and machining centersChapter 3 CNC turning and machining centers
Chapter 3 CNC turning and machining centersRAHUL THAKER
 
Process planning and cost estimation unit v
Process planning and cost estimation unit vProcess planning and cost estimation unit v
Process planning and cost estimation unit vs Kumaravel
 
FORM MEASUREMENTS
FORM MEASUREMENTSFORM MEASUREMENTS
FORM MEASUREMENTSravikumarmrk
 
PPCE Unit 5
PPCE Unit 5PPCE Unit 5
PPCE Unit 5Aravind Ra
 
Cnc cutting tools
Cnc cutting toolsCnc cutting tools
Cnc cutting toolsRakesh Raki
 
INTRODUCTION TO PROCESS PLANNING
INTRODUCTION TO PROCESS PLANNINGINTRODUCTION TO PROCESS PLANNING
INTRODUCTION TO PROCESS PLANNINGSathishkumarM89
 
Unit III Advances in metrology
Unit III Advances in metrologyUnit III Advances in metrology
Unit III Advances in metrologyarivumani ravanan
 
PPCE Unit 4
PPCE Unit 4PPCE Unit 4
PPCE Unit 4Aravind Ra
 
Part programming for nc machines
Part programming for nc machinesPart programming for nc machines
Part programming for nc machinesDorothy Kare
 
PROCESS PLANNING AND COST ESTIMATION
PROCESS PLANNING AND COST ESTIMATIONPROCESS PLANNING AND COST ESTIMATION
PROCESS PLANNING AND COST ESTIMATIONKIT-Kalaignar Karunanidhi Institute of Technology
 
Unit ii Process Planning
Unit ii Process PlanningUnit ii Process Planning
Unit ii Process PlanningAsha A
 
Process Planning & Cost Estimation
Process Planning & Cost Estimation Process Planning & Cost Estimation
Process Planning & Cost Estimation Prabhu Bose
 
ADVANCES IN METROLOGY
ADVANCES IN METROLOGYADVANCES IN METROLOGY
ADVANCES IN METROLOGYravikumarmrk
 
Unit II
Unit IIUnit II
Unit IIDEVARAJMECH
 
COMPUTER AIDED PROCESS PLANNING
COMPUTER AIDED PROCESS PLANNINGCOMPUTER AIDED PROCESS PLANNING
COMPUTER AIDED PROCESS PLANNINGjntuhcej
 
UNIT IV FORM MEASUREMENT
UNIT IV FORM MEASUREMENT UNIT IV FORM MEASUREMENT
UNIT IV FORM MEASUREMENT Devalakshmanperumal1991
 
Cmm ppt
Cmm pptCmm ppt
Cmm pptAkash Maurya
 
NC, CNC & DNC Machine
NC, CNC & DNC Machine NC, CNC & DNC Machine
NC, CNC & DNC Machine Nilraj Vasandia
 
Unit 1
Unit 1Unit 1
Unit 1Aravind Ra
 
PPCE unit 2 (ME8793 – PROCESS PLANNING AND COST ESTIMATION )
PPCE unit 2 (ME8793 – PROCESS PLANNING AND COST ESTIMATION )PPCE unit 2 (ME8793 – PROCESS PLANNING AND COST ESTIMATION )
PPCE unit 2 (ME8793 – PROCESS PLANNING AND COST ESTIMATION )TAMILMECHKIT
 
Computer Aided Process Planning (CAPP)
Computer Aided Process Planning (CAPP)Computer Aided Process Planning (CAPP)
Computer Aided Process Planning (CAPP)Pratik Gandhi
 
Ultrasonic Micro-machining
Ultrasonic Micro-machining Ultrasonic Micro-machining
Ultrasonic Micro-machining Amartya Roy
 
Coordinate Measuring Machine (CMM)
Coordinate Measuring Machine (CMM)Coordinate Measuring Machine (CMM)
Coordinate Measuring Machine (CMM)RajabhauMatePatil1
 
Form measurement
Form measurementForm measurement
Form measurementMohd Erfy Ismail
 
Comparators: mechanical
Comparators: mechanicalComparators: mechanical
Comparators: mechanicalHarshal Varade
 
PROCESS PLANNING ACTIVITIES
PROCESS PLANNING ACTIVITIESPROCESS PLANNING ACTIVITIES
PROCESS PLANNING ACTIVITIESSIVASHANKAR N
 
PPCE UNIT- 2.pptx
PPCE UNIT- 2.pptxPPCE UNIT- 2.pptx
PPCE UNIT- 2.pptxAravind Ra
 

More Related Content

What's hot

INTRODUCTION TO PROCESS PLANNING
INTRODUCTION TO PROCESS PLANNINGINTRODUCTION TO PROCESS PLANNING
INTRODUCTION TO PROCESS PLANNINGSathishkumarM89
 
Unit III Advances in metrology
Unit III Advances in metrologyUnit III Advances in metrology
Unit III Advances in metrologyarivumani ravanan
 
Part programming for nc machines
Part programming for nc machinesPart programming for nc machines
Part programming for nc machinesDorothy Kare
 
Unit ii Process Planning
Unit ii Process PlanningUnit ii Process Planning
Unit ii Process PlanningAsha A
 
Process Planning & Cost Estimation
Process Planning & Cost Estimation Process Planning & Cost Estimation
Process Planning & Cost Estimation Prabhu Bose
 
ADVANCES IN METROLOGY
ADVANCES IN METROLOGYADVANCES IN METROLOGY
ADVANCES IN METROLOGYravikumarmrk
 
COMPUTER AIDED PROCESS PLANNING
COMPUTER AIDED PROCESS PLANNINGCOMPUTER AIDED PROCESS PLANNING
COMPUTER AIDED PROCESS PLANNINGjntuhcej
 
PPCE unit 2 (ME8793 – PROCESS PLANNING AND COST ESTIMATION )
PPCE unit 2 (ME8793 – PROCESS PLANNING AND COST ESTIMATION )PPCE unit 2 (ME8793 – PROCESS PLANNING AND COST ESTIMATION )
PPCE unit 2 (ME8793 – PROCESS PLANNING AND COST ESTIMATION )TAMILMECHKIT
 
Computer Aided Process Planning (CAPP)
Computer Aided Process Planning (CAPP)Computer Aided Process Planning (CAPP)
Computer Aided Process Planning (CAPP)Pratik Gandhi
 
Ultrasonic Micro-machining
Ultrasonic Micro-machining Ultrasonic Micro-machining
Ultrasonic Micro-machining Amartya Roy
 
Coordinate Measuring Machine (CMM)
Coordinate Measuring Machine (CMM)Coordinate Measuring Machine (CMM)
Coordinate Measuring Machine (CMM)RajabhauMatePatil1
 
Comparators: mechanical
Comparators: mechanicalComparators: mechanical
Comparators: mechanicalHarshal Varade
 

What's hot (20)

INTRODUCTION TO PROCESS PLANNING
INTRODUCTION TO PROCESS PLANNINGINTRODUCTION TO PROCESS PLANNING
INTRODUCTION TO PROCESS PLANNING
 
Unit III Advances in metrology
Unit III Advances in metrologyUnit III Advances in metrology
Unit III Advances in metrology
 
PPCE Unit 4
PPCE Unit 4PPCE Unit 4
PPCE Unit 4
 
Part programming for nc machines
Part programming for nc machinesPart programming for nc machines
Part programming for nc machines
 
PROCESS PLANNING AND COST ESTIMATION
PROCESS PLANNING AND COST ESTIMATIONPROCESS PLANNING AND COST ESTIMATION
PROCESS PLANNING AND COST ESTIMATION
 
Unit ii Process Planning
Unit ii Process PlanningUnit ii Process Planning
Unit ii Process Planning
 
Process Planning & Cost Estimation
Process Planning & Cost Estimation Process Planning & Cost Estimation
Process Planning & Cost Estimation
 
ADVANCES IN METROLOGY
ADVANCES IN METROLOGYADVANCES IN METROLOGY
ADVANCES IN METROLOGY
 
Unit II
Unit IIUnit II
Unit II
 
COMPUTER AIDED PROCESS PLANNING
COMPUTER AIDED PROCESS PLANNINGCOMPUTER AIDED PROCESS PLANNING
COMPUTER AIDED PROCESS PLANNING
 
UNIT IV FORM MEASUREMENT
UNIT IV FORM MEASUREMENT UNIT IV FORM MEASUREMENT
UNIT IV FORM MEASUREMENT
 
Cmm ppt
Cmm pptCmm ppt
Cmm ppt
 
NC, CNC & DNC Machine
NC, CNC & DNC Machine NC, CNC & DNC Machine
NC, CNC & DNC Machine
 
Unit 1
Unit 1Unit 1
Unit 1
 
PPCE unit 2 (ME8793 – PROCESS PLANNING AND COST ESTIMATION )
PPCE unit 2 (ME8793 – PROCESS PLANNING AND COST ESTIMATION )PPCE unit 2 (ME8793 – PROCESS PLANNING AND COST ESTIMATION )
PPCE unit 2 (ME8793 – PROCESS PLANNING AND COST ESTIMATION )
 
Computer Aided Process Planning (CAPP)
Computer Aided Process Planning (CAPP)Computer Aided Process Planning (CAPP)
Computer Aided Process Planning (CAPP)
 
Ultrasonic Micro-machining
Ultrasonic Micro-machining Ultrasonic Micro-machining
Ultrasonic Micro-machining
 
Coordinate Measuring Machine (CMM)
Coordinate Measuring Machine (CMM)Coordinate Measuring Machine (CMM)
Coordinate Measuring Machine (CMM)
 
Form measurement
Form measurementForm measurement
Form measurement
 
Comparators: mechanical
Comparators: mechanicalComparators: mechanical
Comparators: mechanical
 

Similar to Ppce unit 2- PROCESS PLANNING ACTIVITIES

PROCESS PLANNING ACTIVITIES
PROCESS PLANNING ACTIVITIESPROCESS PLANNING ACTIVITIES
PROCESS PLANNING ACTIVITIESSIVASHANKAR N
 
PPCE UNIT- 2.pptx
PPCE UNIT- 2.pptxPPCE UNIT- 2.pptx
PPCE UNIT- 2.pptxAravind Ra
 
PROCESS PLANNING ACTIVITIES
PROCESS PLANNING ACTIVITIESPROCESS PLANNING ACTIVITIES
PROCESS PLANNING ACTIVITIESDJAGADEESH1
 
Process Analytical Technology (PAT)
Process Analytical Technology (PAT)Process Analytical Technology (PAT)
Process Analytical Technology (PAT)Krupa Dharwadker
 
TQM UNIT-V.ppt TOTAL QUALITY MANAGEMENT1
TQM UNIT-V.ppt TOTAL QUALITY MANAGEMENT1TQM UNIT-V.ppt TOTAL QUALITY MANAGEMENT1
TQM UNIT-V.ppt TOTAL QUALITY MANAGEMENT1SelvaBabu2
 
Project Quality Management
Project Quality ManagementProject Quality Management
Project Quality Managementmzedan
 
Statistical quality control 1,2
Statistical quality control 1,2Statistical quality control 1,2
Statistical quality control 1,2ROBERA WEGI
 
Continous improvement slide for posting
Continous improvement slide for postingContinous improvement slide for posting
Continous improvement slide for postingjonathanhpd
 
Production Planning and Control
Production Planning and ControlProduction Planning and Control
Production Planning and Controlshrinivas kulkarni
 
10. Project Quality Management
10. Project Quality Management 10. Project Quality Management
10. Project Quality Management BhuWan Khadka
 
BU-PQM-Week-7--8--April-24-02082022-013244pm.pptx
BU-PQM-Week-7--8--April-24-02082022-013244pm.pptxBU-PQM-Week-7--8--April-24-02082022-013244pm.pptx
BU-PQM-Week-7--8--April-24-02082022-013244pm.pptxMuhammad Iftikhar
 
Quality assurance
Quality assuranceQuality assurance
Quality assuranceRajThakuri
 
08 projectqualitymanagement
08 projectqualitymanagement08 projectqualitymanagement
08 projectqualitymanagementDhamo daran
 
Implementing Automated Qms For Business Excellence
Implementing Automated Qms For Business ExcellenceImplementing Automated Qms For Business Excellence
Implementing Automated Qms For Business ExcellenceKhalizan Halid
 
UAS Manajemen Kualitas dan Standar Mutu - Total Quality Management
UAS Manajemen Kualitas dan Standar Mutu - Total Quality ManagementUAS Manajemen Kualitas dan Standar Mutu - Total Quality Management
UAS Manajemen Kualitas dan Standar Mutu - Total Quality ManagementCandy Chua
 
APQP Training presentation
APQP Training presentationAPQP Training presentation
APQP Training presentationQualsys Ltd
 
Quality assurance
Quality assuranceQuality assurance
Quality assuranceSahil Shah
 
Measurement Traceability
Measurement TraceabilityMeasurement Traceability
Measurement Traceabilitysigmatest2011
 

Similar to Ppce unit 2- PROCESS PLANNING ACTIVITIES (20)

PROCESS PLANNING ACTIVITIES
PROCESS PLANNING ACTIVITIESPROCESS PLANNING ACTIVITIES
PROCESS PLANNING ACTIVITIES
 
PPCE UNIT- 2.pptx
PPCE UNIT- 2.pptxPPCE UNIT- 2.pptx
PPCE UNIT- 2.pptx
 
PROCESS PLANNING ACTIVITIES
PROCESS PLANNING ACTIVITIESPROCESS PLANNING ACTIVITIES
PROCESS PLANNING ACTIVITIES
 
Session 12 4th edition PMP
Session 12 4th edition PMPSession 12 4th edition PMP
Session 12 4th edition PMP
 
Process Analytical Technology (PAT)
Process Analytical Technology (PAT)Process Analytical Technology (PAT)
Process Analytical Technology (PAT)
 
TQM UNIT-V.ppt TOTAL QUALITY MANAGEMENT1
TQM UNIT-V.ppt TOTAL QUALITY MANAGEMENT1TQM UNIT-V.ppt TOTAL QUALITY MANAGEMENT1
TQM UNIT-V.ppt TOTAL QUALITY MANAGEMENT1
 
Project Quality Management
Project Quality ManagementProject Quality Management
Project Quality Management
 
Statistical quality control 1,2
Statistical quality control 1,2Statistical quality control 1,2
Statistical quality control 1,2
 
Continous improvement slide for posting
Continous improvement slide for postingContinous improvement slide for posting
Continous improvement slide for posting
 
Production Planning and Control
Production Planning and ControlProduction Planning and Control
Production Planning and Control
 
10. Project Quality Management
10. Project Quality Management 10. Project Quality Management
10. Project Quality Management
 
BU-PQM-Week-7--8--April-24-02082022-013244pm.pptx
BU-PQM-Week-7--8--April-24-02082022-013244pm.pptxBU-PQM-Week-7--8--April-24-02082022-013244pm.pptx
BU-PQM-Week-7--8--April-24-02082022-013244pm.pptx
 
Quality assurance
Quality assuranceQuality assurance
Quality assurance
 
08 projectqualitymanagement
08 projectqualitymanagement08 projectqualitymanagement
08 projectqualitymanagement
 
Implementing Automated Qms For Business Excellence
Implementing Automated Qms For Business ExcellenceImplementing Automated Qms For Business Excellence
Implementing Automated Qms For Business Excellence
 
UAS Manajemen Kualitas dan Standar Mutu - Total Quality Management
UAS Manajemen Kualitas dan Standar Mutu - Total Quality ManagementUAS Manajemen Kualitas dan Standar Mutu - Total Quality Management
UAS Manajemen Kualitas dan Standar Mutu - Total Quality Management
 
APQP Training presentation
APQP Training presentationAPQP Training presentation
APQP Training presentation
 
Pmp quality chapter 8
Pmp quality chapter 8Pmp quality chapter 8
Pmp quality chapter 8
 
Quality assurance
Quality assuranceQuality assurance
Quality assurance
 
Measurement Traceability
Measurement TraceabilityMeasurement Traceability
Measurement Traceability
 

More from Aravind Ra

PPCE UNIT- 4.pptx
PPCE UNIT- 4.pptxPPCE UNIT- 4.pptx
PPCE UNIT- 4.pptxAravind Ra
 
PPCE UNIT- 3.pptx
PPCE UNIT- 3.pptxPPCE UNIT- 3.pptx
PPCE UNIT- 3.pptxAravind Ra
 
UNIT-4 GEAR BOX.ppt
UNIT-4 GEAR BOX.pptUNIT-4 GEAR BOX.ppt
UNIT-4 GEAR BOX.pptAravind Ra
 
unit_iii_bevel_gear.ppt
unit_iii_bevel_gear.pptunit_iii_bevel_gear.ppt
unit_iii_bevel_gear.pptAravind Ra
 
UNIT-2 DTS.pptx
UNIT-2 DTS.pptxUNIT-2 DTS.pptx
UNIT-2 DTS.pptxAravind Ra
 
UNIT-I DTS.pptx
UNIT-I DTS.pptxUNIT-I DTS.pptx
UNIT-I DTS.pptxAravind Ra
 
Unit 2 planning
Unit 2 planningUnit 2 planning
Unit 2 planningAravind Ra
 
Unit 1 overview of management
Unit 1 overview of managementUnit 1 overview of management
Unit 1 overview of managementAravind Ra
 
Unit 5---bearings
Unit 5---bearingsUnit 5---bearings
Unit 5---bearingsAravind Ra
 
Unit 4---springs
Unit 4---springsUnit 4---springs
Unit 4---springsAravind Ra
 
Unit 3---knuckle joint--
Unit 3---knuckle joint--Unit 3---knuckle joint--
Unit 3---knuckle joint--Aravind Ra
 
Coupling -unit-2
Coupling -unit-2Coupling -unit-2
Coupling -unit-2Aravind Ra
 

More from Aravind Ra (20)

UNIT- 5.pptx
UNIT- 5.pptxUNIT- 5.pptx
UNIT- 5.pptx
 
PPCE UNIT- 4.pptx
PPCE UNIT- 4.pptxPPCE UNIT- 4.pptx
PPCE UNIT- 4.pptx
 
PPCE UNIT- 3.pptx
PPCE UNIT- 3.pptxPPCE UNIT- 3.pptx
PPCE UNIT- 3.pptx
 
UNIT- 1.pptx
UNIT- 1.pptxUNIT- 1.pptx
UNIT- 1.pptx
 
clutch.ppt
clutch.pptclutch.ppt
clutch.ppt
 
UNIT-4 GEAR BOX.ppt
UNIT-4 GEAR BOX.pptUNIT-4 GEAR BOX.ppt
UNIT-4 GEAR BOX.ppt
 
unit_iii_bevel_gear.ppt
unit_iii_bevel_gear.pptunit_iii_bevel_gear.ppt
unit_iii_bevel_gear.ppt
 
UNIT-2 DTS.pptx
UNIT-2 DTS.pptxUNIT-2 DTS.pptx
UNIT-2 DTS.pptx
 
UNIT-I DTS.pptx
UNIT-I DTS.pptxUNIT-I DTS.pptx
UNIT-I DTS.pptx
 
UNIT-V FMM
UNIT-V FMMUNIT-V FMM
UNIT-V FMM
 
UNIT-IV FMM
UNIT-IV FMMUNIT-IV FMM
UNIT-IV FMM
 
UNIT-III FMM
UNIT-III FMMUNIT-III FMM
UNIT-III FMM
 
UNIT-II FMM
UNIT-II FMMUNIT-II FMM
UNIT-II FMM
 
UNIT-I FMM
UNIT-I FMMUNIT-I FMM
UNIT-I FMM
 
Unit 2 planning
Unit 2 planningUnit 2 planning
Unit 2 planning
 
Unit 1 overview of management
Unit 1 overview of managementUnit 1 overview of management
Unit 1 overview of management
 
Unit 5---bearings
Unit 5---bearingsUnit 5---bearings
Unit 5---bearings
 
Unit 4---springs
Unit 4---springsUnit 4---springs
Unit 4---springs
 
Unit 3---knuckle joint--
Unit 3---knuckle joint--Unit 3---knuckle joint--
Unit 3---knuckle joint--
 
Coupling -unit-2
Coupling -unit-2Coupling -unit-2
Coupling -unit-2
 

Recently uploaded

Internship report on mechanical engineering
Internship report on mechanical engineeringInternship report on mechanical engineering
Internship report on mechanical engineeringmalavadedarshan25
 
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝soniya singh
 
Software and Systems Engineering Standards: Verification and Validation of Sy...
Software and Systems Engineering Standards: Verification and Validation of Sy...Software and Systems Engineering Standards: Verification and Validation of Sy...
Software and Systems Engineering Standards: Verification and Validation of Sy...VICTOR MAESTRE RAMIREZ
 
GDSC ASEB Gen AI study jams presentation
GDSC ASEB Gen AI study jams presentationGDSC ASEB Gen AI study jams presentation
GDSC ASEB Gen AI study jams presentationGDSCAESB
 
CCS355 Neural Network & Deep Learning UNIT III notes and Question bank .pdf
CCS355 Neural Network & Deep Learning UNIT III notes and Question bank .pdfCCS355 Neural Network & Deep Learning UNIT III notes and Question bank .pdf
CCS355 Neural Network & Deep Learning UNIT III notes and Question bank .pdfAsst.prof M.Gokilavani
 
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptxDecoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptxJoão Esperancinha
 
SPICE PARK APR2024 ( 6,793 SPICE Models )
SPICE PARK APR2024 ( 6,793 SPICE Models )SPICE PARK APR2024 ( 6,793 SPICE Models )
SPICE PARK APR2024 ( 6,793 SPICE Models )Tsuyoshi Horigome
 
microprocessor 8085 and its interfacing
microprocessor 8085 and its interfacingmicroprocessor 8085 and its interfacing
microprocessor 8085 and its interfacingjaychoudhary37
 
Architect Hassan Khalil Portfolio for 2024
Architect Hassan Khalil Portfolio for 2024Architect Hassan Khalil Portfolio for 2024
Architect Hassan Khalil Portfolio for 2024hassan khalil
 
ZXCTN 5804 / ZTE PTN / ZTE POTN / ZTE 5804 PTN / ZTE POTN 5804 ( 100/200 GE Z...
ZXCTN 5804 / ZTE PTN / ZTE POTN / ZTE 5804 PTN / ZTE POTN 5804 ( 100/200 GE Z...ZXCTN 5804 / ZTE PTN / ZTE POTN / ZTE 5804 PTN / ZTE POTN 5804 ( 100/200 GE Z...
ZXCTN 5804 / ZTE PTN / ZTE POTN / ZTE 5804 PTN / ZTE POTN 5804 ( 100/200 GE Z...ZTE
 
Call Girls Narol 7397865700 Independent Call Girls
Call Girls Narol 7397865700 Independent Call GirlsCall Girls Narol 7397865700 Independent Call Girls
Call Girls Narol 7397865700 Independent Call Girlsssuser7cb4ff
 
HARMONY IN THE NATURE AND EXISTENCE - Unit-IV
HARMONY IN THE NATURE AND EXISTENCE - Unit-IVHARMONY IN THE NATURE AND EXISTENCE - Unit-IV
HARMONY IN THE NATURE AND EXISTENCE - Unit-IVRajaP95
 
Sachpazis Costas: Geotechnical Engineering: A student's Perspective Introduction
Sachpazis Costas: Geotechnical Engineering: A student's Perspective IntroductionSachpazis Costas: Geotechnical Engineering: A student's Perspective Introduction
Sachpazis Costas: Geotechnical Engineering: A student's Perspective IntroductionDr.Costas Sachpazis
 
Biology for Computer Engineers Course Handout.pptx
Biology for Computer Engineers Course Handout.pptxBiology for Computer Engineers Course Handout.pptx
Biology for Computer Engineers Course Handout.pptxDeepakSakkari2
 
Gfe Mayur Vihar Call Girls Service WhatsApp -> 9999965857 Available 24x7 ^ De...
Gfe Mayur Vihar Call Girls Service WhatsApp -> 9999965857 Available 24x7 ^ De...Gfe Mayur Vihar Call Girls Service WhatsApp -> 9999965857 Available 24x7 ^ De...
Gfe Mayur Vihar Call Girls Service WhatsApp -> 9999965857 Available 24x7 ^ De...srsj9000
 
Call Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile serviceCall Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile servicerehmti665
 
VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...
VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...
VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...VICTOR MAESTRE RAMIREZ
 

Recently uploaded (20)

Internship report on mechanical engineering
Internship report on mechanical engineeringInternship report on mechanical engineering
Internship report on mechanical engineering
 
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
Model Call Girl in Narela Delhi reach out to us at 🔝8264348440🔝
 
Software and Systems Engineering Standards: Verification and Validation of Sy...
Software and Systems Engineering Standards: Verification and Validation of Sy...Software and Systems Engineering Standards: Verification and Validation of Sy...
Software and Systems Engineering Standards: Verification and Validation of Sy...
 
9953056974 Call Girls In South Ex, Escorts (Delhi) NCR.pdf
9953056974 Call Girls In South Ex, Escorts (Delhi) NCR.pdf9953056974 Call Girls In South Ex, Escorts (Delhi) NCR.pdf
9953056974 Call Girls In South Ex, Escorts (Delhi) NCR.pdf
 
young call girls in Rajiv Chowk🔝 9953056974 🔝 Delhi escort Service
young call girls in Rajiv Chowk🔝 9953056974 🔝 Delhi escort Serviceyoung call girls in Rajiv Chowk🔝 9953056974 🔝 Delhi escort Service
young call girls in Rajiv Chowk🔝 9953056974 🔝 Delhi escort Service
 
GDSC ASEB Gen AI study jams presentation
GDSC ASEB Gen AI study jams presentationGDSC ASEB Gen AI study jams presentation
GDSC ASEB Gen AI study jams presentation
 
CCS355 Neural Network & Deep Learning UNIT III notes and Question bank .pdf
CCS355 Neural Network & Deep Learning UNIT III notes and Question bank .pdfCCS355 Neural Network & Deep Learning UNIT III notes and Question bank .pdf
CCS355 Neural Network & Deep Learning UNIT III notes and Question bank .pdf
 
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptxDecoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
 
SPICE PARK APR2024 ( 6,793 SPICE Models )
SPICE PARK APR2024 ( 6,793 SPICE Models )SPICE PARK APR2024 ( 6,793 SPICE Models )
SPICE PARK APR2024 ( 6,793 SPICE Models )
 
microprocessor 8085 and its interfacing
microprocessor 8085 and its interfacingmicroprocessor 8085 and its interfacing
microprocessor 8085 and its interfacing
 
Architect Hassan Khalil Portfolio for 2024
Architect Hassan Khalil Portfolio for 2024Architect Hassan Khalil Portfolio for 2024
Architect Hassan Khalil Portfolio for 2024
 
ZXCTN 5804 / ZTE PTN / ZTE POTN / ZTE 5804 PTN / ZTE POTN 5804 ( 100/200 GE Z...
ZXCTN 5804 / ZTE PTN / ZTE POTN / ZTE 5804 PTN / ZTE POTN 5804 ( 100/200 GE Z...ZXCTN 5804 / ZTE PTN / ZTE POTN / ZTE 5804 PTN / ZTE POTN 5804 ( 100/200 GE Z...
ZXCTN 5804 / ZTE PTN / ZTE POTN / ZTE 5804 PTN / ZTE POTN 5804 ( 100/200 GE Z...
 
Call Girls Narol 7397865700 Independent Call Girls
Call Girls Narol 7397865700 Independent Call GirlsCall Girls Narol 7397865700 Independent Call Girls
Call Girls Narol 7397865700 Independent Call Girls
 
Call Us -/9953056974- Call Girls In Vikaspuri-/- Delhi NCR
Call Us -/9953056974- Call Girls In Vikaspuri-/- Delhi NCRCall Us -/9953056974- Call Girls In Vikaspuri-/- Delhi NCR
Call Us -/9953056974- Call Girls In Vikaspuri-/- Delhi NCR
 
HARMONY IN THE NATURE AND EXISTENCE - Unit-IV
HARMONY IN THE NATURE AND EXISTENCE - Unit-IVHARMONY IN THE NATURE AND EXISTENCE - Unit-IV
HARMONY IN THE NATURE AND EXISTENCE - Unit-IV
 
Sachpazis Costas: Geotechnical Engineering: A student's Perspective Introduction
Sachpazis Costas: Geotechnical Engineering: A student's Perspective IntroductionSachpazis Costas: Geotechnical Engineering: A student's Perspective Introduction
Sachpazis Costas: Geotechnical Engineering: A student's Perspective Introduction
 
Biology for Computer Engineers Course Handout.pptx
Biology for Computer Engineers Course Handout.pptxBiology for Computer Engineers Course Handout.pptx
Biology for Computer Engineers Course Handout.pptx
 
Gfe Mayur Vihar Call Girls Service WhatsApp -> 9999965857 Available 24x7 ^ De...
Gfe Mayur Vihar Call Girls Service WhatsApp -> 9999965857 Available 24x7 ^ De...Gfe Mayur Vihar Call Girls Service WhatsApp -> 9999965857 Available 24x7 ^ De...
Gfe Mayur Vihar Call Girls Service WhatsApp -> 9999965857 Available 24x7 ^ De...
 
Call Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile serviceCall Girls Delhi {Jodhpur} 9711199012 high profile service
Call Girls Delhi {Jodhpur} 9711199012 high profile service
 
VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...
VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...
VICTOR MAESTRE RAMIREZ - Planetary Defender on NASA's Double Asteroid Redirec...
 

Ppce unit 2- PROCESS PLANNING ACTIVITIES