1. Ali Mohamed Mahmoud Mohamed
Address: El-Sheikh Fadl, Bani-Mazar, El-Minya, Egypt
Marital Status: Married
Military status: Free
Experience: 16 years
Contacts: +201229898169 / +2-086-9240751 / +201026473452
Email: A.mohamed3@bapetco.simis.com, ali_mmmh@yahoo.com
Current Position:
Bapetco, work-over supervisor (WESV), Implementing and following-up work-over operations HSE, Improving
HSE with rig crew operation, manage and review well process safety with the contractor, Pushing the operation
enevlop to top quartile in a varity of different challenges such as Hydrogen sulfide (Neag-1 Field), HPHT (Al-assil &
Karam, and Obayied Fields), sour gas (Obayied Field), and all artifical lift type (Bed-3, Neag JG, and Sitra Fields).
Ensure HSE compliance, strenghthing and HSE culture improvments, coaching junoir WE’s which resulted over
delivery in work-over wells and hoist were gool zero.
Trouble shooting work over operation and HSE issues applying LEAN, After action review (AAR) and real time
monitoring/ analysis and archieving.
During 2012-2014, commisioning two new work-over rigs (ECDC-9 & Dasco-1).
During 2008-2012, starting workover operations in bapetco and commisioning new hoist (ST-24).
During 2000-2008, Supporting all well intervention operations, Frac operations, and completion operations at super-
rigs in Bed-3 area also TCP operations.
Achievements:
My contributions and initiatives as well services engineer, senior well services supervisor, and work-over supervisor
were acknowledged through:
Successfully work on “well Shieba-1” well intervention operation upon area concession handed-over from BP to
Shell as it was hardly to un-secure this old well and completed as the first Sucker Rod well completion in Bapetco.
Winning HSE award from Bapetco drilling management as it was repeated trying to intervene this well.
Successfully Control Ann-B blow-out near to Bed-1 Production station “Well Bed 1-1”, design controlled flare line
away from hazard production processing area and kill Ann-B by bleed and lubricate.
Work-over Neag-1 wells in short time-plan and achieved Neag-1 production target.
Proposed out of box and creative solutions of so many daily operations and HSE challenges such as stuck
completion, well control, work-over optimizations, etc.
Work on safely retrieving the old challenging completion in a short time (Neag JG-2, Bed 15-4 Wells).
Successfully retrieving ESP with all bands lost in hole and wrapped around top of ESP and securing the cable with
modified clamping generated upon face the problem, and generating a new “SOP” while retrieving ESP operation
(Bahga -4 Well)
Playing leading role for guiding the rig contractors working in Bapetco to comply with Bapetco HSE and Operations
Standards, Supervising the improvement process.
Simplifying checking the hoist for acceptance and make standards checklist worked with all the hoists in Bapetco.
Participate in generating a standard drops booklet “Photo-book of all hoist areas” in all hoists in Bapetco.
26179c6e
-20b6-49ad-8a3b-be65bd89f986-170109192604.doc
2. Qualifications Profile
+16 years of local & overseas well intervention, completion and work-over field supervision, insightful, results-
driven Well Engineering professional with notable success directing a board range of corporate well
engineering/production optimization initiatives while participating in planning, program build, optimization and
implementation of solutions in support of business objectives.
Excel at providing comprehensive perfect well design, proficient operations’ execution and troubleshooting and full
lifecycle project management. Hands-on experience leading all stages of well delivery process including; define,
design, review and execute, close out.
Outstanding project and program leader; able to coordinate and direct all phases of project-based efforts while
managing, motivating, and guiding teams.
Highly creative and multitalented Well Engineer with extensive experience in supervision of Completion, Work
Over and Well Services operations. Exceptional collaborative; and interpersonal skills; dynamic team player.
Areas of Expertise
Well Engineering (Completion, Work Over, Well intervention and Well integrity):
Well Completion,
Well Work over Operations,
Completion Fishing Operations,
Scab liner casing running and cementing,
Rig and Rigless Operations,
Completion Design,
Witness for Many Operations Onshore and Offshore,
Prepare Work Programs for Onshore and Offshore Operations,
Killing Operations including oil and gas wells, Low, medium and HP wells,
Review Well Intervention Operations,
Coiled Tubing Operations – sand clean outs, Acidizing, fishing, N2 lifting,
Well Stimulation Acidizing and Fracture stimulation,
Artificial Lift – Sucker Rod pumping, ESP’s, Gas Lift, Jet pumping, PCP’s,
Wire line Operations,
Safety Environment Protection,
Team work with all Hoists teams in BAPETCO and implement all critical operation with highly HSE
achievement.
Technical Professional
1- MS office (Excel, Word, PowerPoint, MS Outlook)
2- Well Engineering Data Management (EDM)
3- Halliburton Completion Design software
4- Tubing Stress Analysis (Stress Check)
26179c6e
-20b6-49ad-8a3b-be65bd89f986-170109192604.doc
3. Professional Experience
1- From Aug 2008 to present:
Bapetco, Work-over Supervisor
Evaluating heavy work over problems and preparing the initial recommendation for the work over programs.
Procure suitable services for the heavy work over programs such as fishing, milling, cutting tools, completion
equipment and stimulation services.
Supervise the sensitive and critical work over operations for fishing and milling; including all type of
overshoots, fishing spear, taper tap, inside and outside pipe cutting and casing cutter.
Supervise all types of well completion: natural and artificial flowing; onshore and offshore; electric
submersible, hydraulic pumps and sucker rod pumps; packer-less and packer completion.
Supervise different types of well testing for both gas and oil wells, evaluate the results.
Supervise several type of well stimulation as Acidizing, water shut off.
Prepare well head equipment (Cameron, FMC, GE, WG and AKER).
Review drilling and work-over operations and plan for all the material requirements, conduct test and
acceptance of the materials
Supervise all sensitive and critical work over operations.
Supervise the implementation of HSE policy including drops, working at height, and Hands and Fingers.
Perform cost benefit analysis on all recommended strategies
Develop curriculum and facilitate awareness training for young well engineers
2- From 2012 to 2013
Bapetco, WSDE
Working in drilling operation for both Obaiyed gas field and bed-3 area" Sitra wells"
Running and cementing all casing sizes.
Directional drilling S shape wells.
Daily check mud engineer testing and mud mixing.
Loss zones recovery process.
Working at EDM for daily operation reporting.
Perform OH fishing operations.
3- From: 2001 To 2008
Bapetco, Well Services Engineer, Senior Well Services Supervisor
Completion supervisor for oil & gas wells (vertical, Deviated, HPHT).
Wireline operations e.g. (running/pulling of plugs, SSD'S, SCSSSV,BHP surveys…etc). on charge and
supervision for all slick-line operation while running completion..
Supervise the running process of completion string (CS & S13%Cr running, Packer/Packerless running,
Pressure testing,
This work including tubing mobilization, drifting, measuring, tailed, running procedures, testing, space out for
26179c6e
-20b6-49ad-8a3b-be65bd89f986-170109192604.doc
4. sting-in completion systems and accurate packer setting depth correlated with GR/CCL tool and setting
procedures.
SPM onsite valve and dummies installations and pressure testing.
SC-TRSSV installation, C/L connection testing and isolation with sleeve.
Completion string isolation with plugs, lock MDL and prong, SSD and non-lock setting and releasing
procedures.
Run all packer retrievable and Permanente on both E-line and drill pipe string (F-1, FB-1, FBA-1, DB,SC-2
and AHC Halliburton packer)
Running DST test string, Frac. String & TCP guns.
Formation Fracturing Operations (High pressure large volume multi-zone Fracing, Acidizing, Hydraulic
Propped Fracs.
Work-over operations on running drilling rigs.
Rig/Rigless Fishing Operations either by Wireline, and Coiled tubing.
Wellhead Maintenance (Surface Safety valves, X-Mass tree maintenance).
Completion Make-up and testing in workshop (packers, nipples, SCSSSV, SPM'S, hanger's, Locator Seal &
Anchor Seal assembly's).
Electrical Wire line Services (BHP surveys, PLT, perforations, TDT, Down-hole Video Cameras…etc).
Rig/Rigless Well Testing for exploration and production gas/oil wells, DST'S isochronal tests and collect PVT
samples.
Subsurface Production Operations (water zones shut off, down hole surveys) by down-hole inflatable packer
ESP, jet pump and sucker rod Running and pump replacement.
4- From Nov. 2000 To Sep 2001
Drilling & Work-over Engineer
Work as an assistant supervisor for both drilling & work- over operations.
Drilling operation includes both vertical & direction wells.
Assist DSV on all drilling operation and ensure implementation of HSE and operation.
Work at the rig site as a company man (representative) on different types of onshore rigs.
Supervise several types of light and heavy work over operations and Run different types of well completion
(flowing and artificial lift)
Well testing and stimulation operations.
Running, cementing casing & liners
Education
2000 BSc in Petroleum Engineering (Good) Suez Canal University.
26179c6e
-20b6-49ad-8a3b-be65bd89f986-170109192604.doc
5. Professional Training:
1- June 2015, IWCF (98%P&P, 98%Equip and 98% simulator), Randy Smith training Center, valid to Jun 2017.
2- Feb. 2015, WDLP Level II: Well Engineering Course Examination, Shell Egypt, Passed.
3- Nov. 2014, WDLP Level II: Well Engineering Course Preparation, Shell Netherlands,
4- Feb. 2014, Horizontal and multilateral directional drilling and Completion, AUC “American University in
Cairo”.
5- NOV. 2013, NORMS “Natural Occurring Radioactive training” Grid knowledge training center “Muscat,
Sultanate of Oman” valid to Nov. 2018.
6- NOV. 2013, PTWS “Permit to work System”, Grid knowledge training center “Muscat, Sultanate of Oman”
valid to Nov. 2017.
7- Nov. 2013, CMC “Coaching and mentoring Grid knowledge training center “Muscat, Sultanate of Oman”
valid to Nov. 2017.
8- Nov. 2013, HTS, Grid knowledge training center “Muscat, Sultanate of Oman” valid to Nov. 2017.
9- Nov. 2013, Safety leader for Supervisors, Grid knowledge training center “Muscat, Sultanate of Oman” valid
to Nov. 2017.
10- Nov. 2013, Initial Fire Response, Grid knowledge training center “Muscat, Sultanate of Oman” valid to Nov.
2016.
11- Nov. 2013, Gas tester training, Grid knowledge training center “Muscat, Sultanate of Oman” valid to Nov.
2016.
12- Nov. 2013, H2S training, Grid knowledge training center “Muscat, Sultanate of Oman” valid to Nov. 2016.
13- Jun. 2013, IWCF (97%P&P, 100%Equip and 95% simulator), OGS training Center.
14- Jul. 2011, IWCF (98%P&P, 100%Equip and 93% simulator), OGS training Center.
15- Jul. 2009, IWCF (94%P&P, 95%Equip and 95% simulator), Randy Smith training Center.
16- Dec. 2008, Round II Completion & Well Intervention Examination, Shell Netherland
17- Nov. 2007, Wells distance learning package (Level II: Completion & Well Intervention), Shell
Netherland
18- Jul. 2007, IWCF (95%P&P, 95% Equip. and 95% simulator), EDC training center
19- Oct. 2006, Wells distance learning package (Level I: Completion & Well Intervention), Shell Netherland
20- Aug. 2005, Effective communication Skills, Enppi.
21- May.2005, IWCF (94%P&P, 95% Equip. and 95% simulator), EDC training Center.
22- Dec. 2004, Sucker Rod Completion & Operation, LUFKIN Company Egypt.
23- Feb. 2004, Defensive driving Course, Petro-sief training Center.
24- Oct. 2003, Wireline Operation Course, Arabic academy.
25- Feb. 2003, IWCF (94%P&P, 92%Equip and 95% simulator), Randy Smith training Center.
26- Oct.2001, Well Control Course, EDC training Center.
27- Jul. 2001, Coiled tubing operations, Gesco group training center.
26179c6e
-20b6-49ad-8a3b-be65bd89f986-170109192604.doc
6. Professional Training:
1- June 2015, IWCF (98%P&P, 98%Equip and 98% simulator), Randy Smith training Center, valid to Jun 2017.
2- Feb. 2015, WDLP Level II: Well Engineering Course Examination, Shell Egypt, Passed.
3- Nov. 2014, WDLP Level II: Well Engineering Course Preparation, Shell Netherlands,
4- Feb. 2014, Horizontal and multilateral directional drilling and Completion, AUC “American University in
Cairo”.
5- NOV. 2013, NORMS “Natural Occurring Radioactive training” Grid knowledge training center “Muscat,
Sultanate of Oman” valid to Nov. 2018.
6- NOV. 2013, PTWS “Permit to work System”, Grid knowledge training center “Muscat, Sultanate of Oman”
valid to Nov. 2017.
7- Nov. 2013, CMC “Coaching and mentoring Grid knowledge training center “Muscat, Sultanate of Oman”
valid to Nov. 2017.
8- Nov. 2013, HTS, Grid knowledge training center “Muscat, Sultanate of Oman” valid to Nov. 2017.
9- Nov. 2013, Safety leader for Supervisors, Grid knowledge training center “Muscat, Sultanate of Oman” valid
to Nov. 2017.
10- Nov. 2013, Initial Fire Response, Grid knowledge training center “Muscat, Sultanate of Oman” valid to Nov.
2016.
11- Nov. 2013, Gas tester training, Grid knowledge training center “Muscat, Sultanate of Oman” valid to Nov.
2016.
12- Nov. 2013, H2S training, Grid knowledge training center “Muscat, Sultanate of Oman” valid to Nov. 2016.
13- Jun. 2013, IWCF (97%P&P, 100%Equip and 95% simulator), OGS training Center.
14- Jul. 2011, IWCF (98%P&P, 100%Equip and 93% simulator), OGS training Center.
15- Jul. 2009, IWCF (94%P&P, 95%Equip and 95% simulator), Randy Smith training Center.
16- Dec. 2008, Round II Completion & Well Intervention Examination, Shell Netherland
17- Nov. 2007, Wells distance learning package (Level II: Completion & Well Intervention), Shell
Netherland
18- Jul. 2007, IWCF (95%P&P, 95% Equip. and 95% simulator), EDC training center
19- Oct. 2006, Wells distance learning package (Level I: Completion & Well Intervention), Shell Netherland
20- Aug. 2005, Effective communication Skills, Enppi.
21- May.2005, IWCF (94%P&P, 95% Equip. and 95% simulator), EDC training Center.
22- Dec. 2004, Sucker Rod Completion & Operation, LUFKIN Company Egypt.
23- Feb. 2004, Defensive driving Course, Petro-sief training Center.
24- Oct. 2003, Wireline Operation Course, Arabic academy.
25- Feb. 2003, IWCF (94%P&P, 92%Equip and 95% simulator), Randy Smith training Center.
26- Oct.2001, Well Control Course, EDC training Center.
27- Jul. 2001, Coiled tubing operations, Gesco group training center.
26179c6e
-20b6-49ad-8a3b-be65bd89f986-170109192604.doc