A Critique of the Proposed National Education Policy Reform
Smart Sensors, use sensors to protect phone users from traffic accidents.
1. Group Name : RAM
Abdulrhman Mohammed Ali Al- kaabi
Abdullah Al –shahwani Thamer Ali
2. Outline• Introduction
• Activity 1: Evading Motion Detection
• Activity 2: Taking a tour of some sensors
• Activity 3: Making Microphone
• Activity 4: Exploring the Piezo Effect :Inside story
• Activity 5: Measuring Piezoelectric or Pyroelectric
Response
• Design Project: Design a coin counter
• Product Idea:use sensors to protect phone
users from traffic accidents.
3. Introduction
sensor is an electronic component, module, or
subsystem whose purpose is to detect events or
changes in its environment and send the information
to other electronics.
In this module we are going to use smart sensors to
make inventions that is going to help people in the
future.
4. Activity 1: Evading Motion Detection
Objective: To detect motion of live beings
Steps:
Try to throw different object in front of the sensor
Try to walk or run infront of the sensor
Try to stand without any movements
5. Activity 1: Evading Motion Detection
Results
The sensor can detect Infra red radiation
The sensor can detect only movements
Conclusion
We an use this sensor in night vision cameras that only
works on movements
6. Activity 2: Taking a tour of some sensors
Objective: The main target from this activity was to
learn more about smart sensors and how it works and
how it used in toys and , devices, and different
applications.
Steps: get some sensors and know it’s input and
output.
Try to talk ,move, press and blow on the sensor and
how it react.
7. Activity 2: Taking a tour of some
sensors
Results:
Conclusion:we discovered that smart sensors has many
typs and many uses and that Smart sensors enable
more accurate and automated collection of
environmental data with less erroneous.
device Input output
Talking frog sound sound
Light sensor light sound
termometer tempruture numbers
8. Activity 3: Making Microphone
Objective:the main objective was to use smart
sensor(pvdf)to make a simple microphone.
Steps: get an pvdf sensor and connect it to
amplifer/speaker by a crocodile.
Try to talk,blow and flick in front of the sensor.
9. Activity 3: Making Microphone
Results: that we can make a simple microphone
Conclusion: choosing a sensor is based on the
applications that the sensor is going to used at.
TYPE RIGID PVDF FLEXABLE PVDF
FLICK MORE LESS
SCRACH MORE LESS
BLOW MORE LESS
TALK LESS MORE
10. Activity 4: Exploring the Piezo Effect :Inside
story
Objective:
To know the chemical of instruction of the polimar of
the (pvdf) sensor.
The pdvf sensor is made from a polymer
named:(C2F2H2).
11. Activity 5: Measuring Piezoelectric or
Pyroelectric Response
Objective: study how pvdf senses pressure and
converts themointo.
Steps: get (pvdf) and croco and multimeter.
Connect the pvdf and multimeter.
Apply pressure and movements on the pvdf.
Read the output volt from the multimeter.
12. Activity 5: Measuring Piezoelectric or
Pyroelectric Response
Results: that when we make more prussure on the
pvdf we get more output volt.
Conclusion: that pvdf has pizeoelectric propertis
and pyroelectric properties.
coin v1 v2 v3 vcvg mass
coin1 4.57 4.25 3.81 4.21 8g
coin2 2.32 2.12 1.76 2.66 4.4g
coin3 2.1 1.68 1.12 1.63 3g
13. vcvg mass
4.21 8g
2.66 4.4g
1.63 3g
4.21
2.66
1.63
8
4.4
3
0
1
2
3
4
5
6
7
8
9
Average Volt Mass
14. Design Project: Design a Coin
Counter
Objective: study how coin counter works from inside.
To know how smart sensors used in our modern life
and see examples for it.
15. Design Project: Design a Coin
Counter
Results: that smart sensors like pvdf are used in the coin
counter to magrer the pressure cased by the coin.
Conclusion: That pvdf sensors can identfiy diffrend
objects from it’s mass by mageraing the volt cased by the
pressure from the mass.
coin v1 v2 v3 vcvg mass
coin1 4.57 4.25 3.81 4.21 8g
coin2 2.32 2.12 1.76 2.66 4.4g
coin3 2.1 1.68 1.12 1.63 3g
16. Final Project: Attention catcher
Introduction and Rationale:
We choose this project to try to save more lifes by avoid traffic
accidents that cased by people whoes distracted by using ther
phons while walking or crossing the streets.
That project is going to be very useful in the crowded streets and
cities and will be useful in cities like doha in the world cup (2022)
.
the special thing about the project that it’s cheep-simple and
easy to use other wise it can save lives.
Our project is made from simple and popular materials like:
plastic/led lights/pvdf sensors/small microphone. And that is
going to give the project more advantges.
17. Attention catcher
Aim of the work (objectives) (البحث )هدف
Our target from this is to save more valuable lifes
by execution this project in the main streets and
traffic lights to warn people about the dangorus that
they are not attention to it.
To help Qatar on organizenig the streets of the
main cities during the world cup 2022 and help to
make it saver.
19. Attention catcher
Materials
the materials of our project is very popular and easy to
get .
First of all we need about 2-3 meter fron plastic
tube(transparent).
Led lights (green and red).
Flixable (pvdf) sensors.
Superfine rubber cover.
Small speaker.
Wires(2-4 meter)
20. Attention catcher
Method
1. Distribute the pvdf on the ground of crossroads
or trafficlights walk space and cover the sensors
with the suberfine rubber.
2. Put the led ligths into the tube and connect it to
the pvdf by the wires(so when we put prussure
into the pvdf the red light work).
3. Conect the speaker to the lights so when the
lights work the speaker play a small tone.
21. Attention catcher
Results: ()النتائج
The product solve a very good part of the problem
that it designed for and the tests of the product
shows a good reduces in the traffic accidents.
The project has got many uses in many ways
because it’s easy to bild and composition and that
will help the project to spread out fast beside the
damges that the product is going to help us to
avoid and that will save the lifes and the puplic
mony.
23. Conclusions
Iwould like to thank al-bairaq and the university of Qatar
also I would like to thank the sponsors UNESCO, Qatar
National Commission, Ras Gas, and Shell for helping us by
opiningacompetition that was very useful and we gained a
lot of experience and knowlage from it and recommend
ever student to take part in it.
24. Acknowledgment
Many thanks to AL-Bairaq team from Center for Advanced
Materials (CAM), Qatar University for supporting us during
our journey with a AL-Bairaq.
Also, I would like to thank the sponsors UNESCO, Qatar
National Commission, Ras Gas, and Shell.