1. ABDUL GANI
Contact details: +91-9866357747
bgani76@gmail.com
Notice period: 1 month
Career Summary
Sincere, goal-oriented and Graduate Electrical Engineer with 14 years of experience.
Testing & commissioning of signaling equipments of Automatic Train Control (ATC) system
of Thales Rail Signalling Solutions for AL Mashaaer AL Mughaddassah Metro Project.
Testing of Local System Management Centre (LSMC) of SCADA based programmed on
windows platform.
Project Engineer and experienced in installation, testing, commissioning of Remote
Terminal Unit (RTU) & Supervisory Control and Data Acquisition (Power -line SCADA)
project for Indian Railways.
Testing and commissioning of INTERSIG and ACE rack.
Wayside Installation and Testing of Inductive Loops, Axle Counters, Axle Counter Junction
Boxes, Feed In Device (FID) units, Remote Loop Boxes (RLB), Data CTF Racks, Line
Amplifier Racks and Signals.
Installation and supply of traction Power over guide way sections/loops to be
Good knowledge and skills in SCADA application such as Development, Integration & tests
of Hardware to prove the specification to the customer in the final acceptance of the
system,
Commissioning of Projects and after commissioning of project annual maintenance
services& trouble shooting.
Time Synchronization. Design, Automation & Control Systems involving configuration,
programming and testing of HMI, MMI, SETSS, LOGIC and Control Panel.
Communication protocol like Ethernet, DH485, DH+, RS232, Control net, Device net,
MODBUS, IEC 61850, IEC 104, IEC 101, IEC 103.
Power Controlled Remote Control Center each sub divided section consists of different un
manned control posts (SP, SSP, TSS).
Monitoring involves status of the field devices like CB, BM, and Transformer Tap, Analog
Parameters like Current, Voltage and health of the Catenary (Traction Lines).
2. Professional Experience
4.6 years experience as a Project Engineer in TCS Ltd (TATA CONSULTANCY
SERVICES) CMC center, Hyderabad.Erection, Testing and Commissioning of RTU,
SCADA system for Indian Railway. From March 2012 to till date
1.4 years experience as a System Integration Testing Engineer in E to E Rail,
Bangalore. Testing and Commissioning of CBTC System of Makkah metro project in
Saudi Arabia (KSA).From October 2010 to January 2012
5 years experience as a RTU, SCADA commissioning Engineer in NELCO, Mumbai.
From November 2005 to September 2010
3 years experience as a Site Engineer in ROSHAN ELECTRICAL CO., Mumbai.
Electrical Interior Design and Installation Work.
From September 2002 to October 2005.
As a System Integration Engineer in TCS Ltd.
Project : Nandalur – Guntakal SCADA project.
Client : RVNL, South Central Railway, Guntakal Division.
Duration: From March 2012 to till.
Job responsibilities:
Erection, Testing and Commissioning of SCADA Systems and RTUs model :9035- 62/63
In this project I involved for the testing and commissioning of 18 RTU of TSS, SP and
SSP.
Integrate the RTU with ALIND STATIC Control relay panel and NUMERICAL panel.
Maintenance of LAN and WAN.
Involved in to configure mimics on C++ Visual basic program on windows Platform.
Modifications in I/O points PLC logics as per site hardware requirement.
Knowledge of IEC-80760-5-101,102,103,104 and Modbus protocol.
Involved in Installation, Testing & Commissioning of battery and UPS set.
Coordinating with Customer & Contractors and finally handing over the System to the
Customer.
Preparation of complete Bill of Material, Schematics.
Follow-up for outstanding payment
As a Integration Testing Engineer for E to E (Thales)
Project Al Mashaaer Al Muqaddassah Metro.
Client : THALES Security Solutions
Duration : October 2010 to January 2012.
3. Technical : CBTC, SelTrac System
Job Responsibilities:
Testing & Commissioning of Signaling equipment’s of Automatic Train Control
(ATC) system of Thales Rail Signalling Solutions for AL Mashaaer AL Mughaddassah
Metro Project.
Wayside Installation and Testing of Inductive Loops, Axle Counters, Axle Counter
Junction
Boxes, Feed In Device (FID) units, Remote Loop Boxes (RLB), Data CTF Racks, Line
Amplifier Racks and Signals.
VCC (DVDT for test track) and SMC equipment, VCC Input/output Rack, VCC Data
Transmission (DT) Rack, SMC Input/output Rack and CTF Rack.
Develop Test plans, Test environment and test scenarios on the daily Basis as
dictated by standards/management.
Involved in Installation of VCC rack and connecting Cable to Neighboring VCC and
Snooper, Interface
Verified correct power input and start-up of an Axle Counter unit and STC.
Verified detection of block occupancy - Fallback Mode.
Verified STC Reaction to Failure in Communication Between ACE and Axle Counter
Unit.
Verified that the STC can detect the following:
Platform Emergency Stop Device (PESB)
1. Activation and STC response.
2. Platform Emergency Stop Buttons (PESB)
3. De-activation and STC response.
Verified that the data communications between the STC and a NSTC will operate
with a bit error using Win Byte.
Verified Data Communications between an Axle Counter Evaluator (ACE) and all
associated Axle Counters.
Verified that the STC correctly moves each switch under its command and Verified
Switch Move Commands and Correct Detection of Switch Status using Local SMC.
Verified Switch Move and Status Failures – Field by verifying the field status with
LSMC.
Verified that the signals correctly display aspects as commanded by the STC using
the LSMC taken logs.
Verified Relationship between Crossover Detection and VOBC Window for
Crossover Detection using Spectrum Analyzer, Extended Card.
Verified the VOBC Receive data-link (36kHz,56kHz)
Data Capture Using Protocols(RS 232/422) for:
Vehicle On Board Controller (VOBC) using RTD.
ATP Mode Testing: Trip stop testing for all trains and signals for integrity of safe
operations. Troubleshoots during the fault occurrences.
4. Testing equipment used/Familiar in using:
FLUKE Scope Meter, HP Spectrum Analyzer, HP Protocol Analyzer, Data Logger and
As a Commissioning Engineer in NELCO
NELCO LIMITED: Established in 1940 and a part of leading business house of the TATA
group, NELCO LIMITED is focused on system integration & product management for
industrial controls, power & electronics.
PROJECT UNDERTAKEN
Project 1: Renigunta-Nandalur Section installation and maintenance.
Client : Railway Electrification Guntakal Division.
Duration: June 2007 to September 2010.
Project 2: RTU, SCADA system Installation, Testing & Commissioning of
Tirupati – Katpadi section
Client : Chief Project Manager, Railway Electrifications (R.E), South Region, Chennai
Duration : August 2006 – May 2007.
Project 3: RTU, SCADA systems Testing & Commissioning for Renigunta –Gudur section
Client : Dy.CEE Construction/Traction, South Central Railway
Duration : November 2005 –June 2006.
Job responsibilities:
Erection, Testing & Commissioning of SCADA System and RTU.
Testing and Commissioning and Maintenance of 27 RTU of TSS, SP and SSP.
Maintenance of servers (HOST), communication servers (FEP)
and MMI and16 port HUB.LAN and WAN maintenance.
Modifications in I/O point and logics as per requirement of site. Preparation of
functional design,Specification for all applicable functions.
Involved in Erection, testing & commissioning and maintenance of battery set. We had
two separate sets of battery banks. One set is Sulphuric acid battery 55 nos each 2V,
110V capacity and other is HBL Nickel Cadmium battery 92 nos each1.2 V, 110V
capacity.
Coordinating with Customer & Contractors and finally handing over the System to the
Customer.
Follow-up for outstanding payment.
4. As an Electrical Site Engineer in ROSHAN ELECTRICAL Co.
Project 1
Electrical Interior Design and Installation Work
Client : CEO/Mumbai Regional office, E-Funds International India Pvt Ltd-Malad (W),
Duration: September 2004 to October 2005.
5. Project 2
Electrical Interior Design and Installation Work
Client : ICICI bank –Worli, Dadar (W), Mumbai.
Duration : September 2002 to August 2004.
Job responsibilities:
Installation and Commissioning of HT Substations up to 33/11KV (Outdoor/Indoor).
Installation and Commissioning of Fire alarm, CC TV and Access Control Systems.
Design and Wiring for Power and Lighting circuit
Site Survey, Project planning, Material &vendor selection.
Preparing Electrical& field wiring details, cable schedule.
Coordinating with costumer & Contractors and finally handing over the System to the
Customer.
Follow-up for outstanding payment.
Personal Skill:
Ability to work independently and efficiently, Pro-active, Team leader and Self-starter.
Educational Credential
B-tech Electrical
Rajasthan Vidhyapeet University.
Diploma Engineering – Electrical and Electronics
State Board of Technical Education and Training Hyderabad.
High School
Z.P.H.School, Gooty (R.S), ANANATAPUR (Dist).
IT Skills
Windows, MS Office, Hardware and Networking
Date of Birth: 15th March 1976
Marital Status: Married
Passport No: J8727453 INDIA
References: Available on Request