2. Site Manager Registration
•
•
•
•
•
Navigate to Site Manager Registration by selecting it in the drop down
menu.
Enter the IP Address for Site Manager. The communication to Site Manager
is encrypted TCP/IP so it can be over a WAN or the Internet, it uses port
443, this can be reconfigured to use a different port if required
Now enter the Security password configured in Site Manager for System
Area Manager to establish secure communication.
The Site Name and Location are the user defined fields that are used to
identify the System Area Manager at the Site Manager.
Click on the Register button and the System Area Manager will start the
registration process.
2
3. Reconfiguring the Site Manager Port
• The default configuration of Site Manager allows System Area
Manager to communicate with it using port 443. If you have
configured Site Manager to use a different port for SSL, you will
need to modify the System Area Manager configuration file
syam.properties in this directory:
• C:SyAMJettysyamwebappsrootWEB-INF
•
• Use a text editor to edit the file, changing this line:
• sitemanager_port=443
• to use the port used by Site Manager. After saving the file, restart
the SyAM Software System Area Manager services.
3
4. Site Manager Registration
•
•
•
Once the registration information has been successfully communicated to
Site Manager it moves to status Pending Approval. The Site Manager must
approve the System Area Manager before the status becomes Managed.
If you wish to stop the System Area Manager from reporting to Site
Manager, click the Disconnect button. The System Area Manager can also
be disconnected by the Site Manager.
All communication events are recorded and displayed below in the Site
Manager Registration Event Log.
4
5. Resynchroniziong to Site Manager
• If the System Area Manager is rebooted it is reccomended to
perform a resynchronization with Site Manager to get all current
system status into Site Manager.
• To do this press the Resynchronize wth Site Manager button
5
6. Managing Users/Groups
•
•
The first user logging in after installing System Area Manager, or after an
upgrade from an earlier version, will automatically be added as a System
Area Manager user and will be assigned to the administrators group, for
which all available privileges are enabled. All other users must be added in
Manage Users and Groups
Click the Add Group button to create a new user group
6
7. Creating a Group
•
•
First enter a name for the new
user group.
Then select which features you
want the users within the group
to use
– Modify allows the users to make
changes
– View gives access to every
feature but they can only view
– Choosing no access eliminates
users to even view that feature
7
8. Adding a User
When adding a new user, enter the username and select the group to which the
user will belong
8