The document discusses wind energy and wind turbines. It provides an overview of wind power, why renewable energy is important, the Kyoto agreement on reducing greenhouse gases, and wind power potential and development in India. It then discusses ALTEM Power Limited, an Indian company that manufactures wind turbines, and provides technical details on its product range and the factors to consider when setting up a wind turbine.

1. Wind Energy By ALTEM POWER LIMITED

4. Kyoto Agreement Global Status Countries Signed & ratified Countries Signed & not yet ratified Countries , not yet decided Countries , no intention of signing

5. Types of Renewable Resources 1 2 3 4 5 6 7 8

9. India Wind Power Density Map

10. State Wise Wind Power Potential In India State Gross potential (MW) Technical potential (MW) Installed capacity (MW) Andhra Pradesh 8275 1750 121 Gujarat 9675 1780 376 Karnataka 6620 1120 688 Kerala 875 605 2 Madhya Pradesh 5500 825 53 Maharashtra 3650 3020 1242 Orissa 1700 680 2 Rajasthan 5400 895 386 Tamil Nadu 3050 1750 3148 West Bengal 450 450 2 Total (All India) 45195 12875 6018

14. Rural Electrification through Renewable Energy.

16. ALTEM POWER LIMITED Manufacturing Wind Turbines Introduction to

17. TO DEVELOP BEST TECHNOLOGICAL WIND MILL AT COMPETITIVE PRICE OBJECTIVE

18. A DIVERSE, THRIVING & SUSTAINABLE NATURAL WORLD TO BE A MAJOR FORCE IN CONSERVING ECO-DIVERSITY WORLD-WIDE VISION MISSION

21. ALTEM Product Range 1 2 3 4 5

22. Technical Parameters ( technical parameters may change due to continuous R&D) Rated Power (KW) 9 / 10 15 20 - 25 50 Rated Wind speed (m/sec) 12 12 12 12 Number of Blades 2 2 2 3 Rotor dia (Met) 6.5 9.5 12 18 Swept area (Sq met) 30 58 113 226 Blade material Epoxy / Glass Fiber Epoxy / Glass Fiber Epoxy/Glass Fiber Epoxy / Glass Fiber Blade weight (approx) (KGs) 44 64 80 122 Type of Generator Permanent Magnet Permanent Magnet Permanent Magnet Permanent Magnet Transmission Drive direct Direct drive Direct drive Geared / Direct drive Tower Fixed / Tilting Tower Fixed / Tilting Tower Fixed / Tilting Tower Fixed Type of Hub Fixed pitch Fixed pitch Fixed pitch Fixed pitch Rotor speed at rated wind speed (rpm) 150 100 108 250 Cut-in wind speed (m/sec) 2.5 2.5 3 3 Cut-off wind speed (m/sec) 25 25 25 25 Control system PLC based PLC based PLC based PLC based Approx Nacelle weight (KGs) 700 1000 1400 2000 Annual Energy output KWH (@ 6m/s) 23,000 38,500 64,000 1,28,000

26. Typical Block Diagram

31. Step Process Example 1 Identify total daily use in Watt-hours (Wh) 6,000 Wh/day 2 Identify Days of Autonomy (backup days); multiply Wh/day by this factor 3 Days of Autonomy: 6,000 x 3 = 18,000 W 3 Identify Depth of Discharge (DoD) and convert to a decimal value. Divide result of Step 2 by this value 40% DoD: 18,000 / 0.4 = 45,000 W 4 Derate battery bank for ambient temperature effect. Select the multiplier corresponding to the lowest average temperature your batteries will be exposed to. Multiply result from Step 3 by this factor. Result is minimum Wh capacity of battery bank: Temp. in [degrees] F. Factor 80+ 1.00 70 1.04 60 1.11 50 1.19 40 1.30 30 1.40 20 1.59 60° F. = 1.11 45,000 x 1.11 = 49,950 W 5 Divide result from Step 4 by system voltage. Result is the minimum Amp-hour (Ah) capacity of your battery bank. 49,950 / 48 = 1,040 Ah

34. ISO Certified

35. CE Certification

36. Invest in a greener, brighter & safer tomorrow Lets not blow our future

37. Thank You !! by TEAM ALTEM