This white paper compares methods to increase throughput for point-to-point satellite links, including Adaptive Coding and Modulation (ACM) and DoubleTalk Carrier-in-Carrier (CnC) technology. It provides four case studies analyzing scenarios using a 10 Mbps synchronous data rate with 99.95% availability over Ku-band. Scenario 1 analyzes a conventional two-carrier link and CnC link without ACM, finding no increase in total data rate.
This is a presentation from BOSCH, one of the finalists at the 5th CII-GBC National
Award for Excellence in Water Management in 2008
The awards are in 2 categories, Within the Fence for work done on minimizing the organisations water footprint, and Beyond the Fence for work done in the community around the industry.
This presentation was in the "Beyond the Fence" category.
We thank CII and the respective companies for giving us permission to upload these presentations on the India Water Portal website for dissemination to a wider audience.
This is a presentation from BOSCH, one of the finalists at the 5th CII-GBC National
Award for Excellence in Water Management in 2008
The awards are in 2 categories, Within the Fence for work done on minimizing the organisations water footprint, and Beyond the Fence for work done in the community around the industry.
This presentation was in the "Beyond the Fence" category.
We thank CII and the respective companies for giving us permission to upload these presentations on the India Water Portal website for dissemination to a wider audience.
”Det beror sig på” blev det rätta svaret i molnvarianten av ”Vem vill bli miljonär?”. För vad som krävs för att bygga en molnmiljö, vad man kan tjäna på att använda molntjänster och vilka de olika stegen bör vara, beror helt på vilken typ av verksamhet som bedrivs, vem i verksamheten som tillfrågas och hur mogen verksamheten är.
Snurrigt? Inte alls, titta på genomgången av IBMs Monica Claesson för att få en bättre bild av hur du bör gå tillväga för att föra ditt företag mot molnet.
Talare: Monica Claesson, IBM
A Study of communities and counties within the Triangle J and Kerr-Tar regions examining how future spending was projected for the subsequent five years, categorized into fourteen areas of spending.
Improving Indoor Coverage How Wi Max Modems Can Play A Major Role In The Subs...Green Packet
With WiMAX indoor traffic taking up more than 80% of total WiMAX traffic, WiMAX Operators are faced with the pressing need to improve indoor coverage. Contrary to common belief that WiMAX Modems are merely variables in the WiMAX subsystem, this whitepaper discusses how WiMAX
Modems can play a major role in the subsystem, particularly in improving indoor coverage.
Comcast Business Class Ethernet Dedicated Internet (EDI) Service
is a simple, reliable and more fl exible option to traditional private line
dedicated Internet access services, providing higher bandwidth and
increased efficiencies
”Det beror sig på” blev det rätta svaret i molnvarianten av ”Vem vill bli miljonär?”. För vad som krävs för att bygga en molnmiljö, vad man kan tjäna på att använda molntjänster och vilka de olika stegen bör vara, beror helt på vilken typ av verksamhet som bedrivs, vem i verksamheten som tillfrågas och hur mogen verksamheten är.
Snurrigt? Inte alls, titta på genomgången av IBMs Monica Claesson för att få en bättre bild av hur du bör gå tillväga för att föra ditt företag mot molnet.
Talare: Monica Claesson, IBM
A Study of communities and counties within the Triangle J and Kerr-Tar regions examining how future spending was projected for the subsequent five years, categorized into fourteen areas of spending.
Improving Indoor Coverage How Wi Max Modems Can Play A Major Role In The Subs...Green Packet
With WiMAX indoor traffic taking up more than 80% of total WiMAX traffic, WiMAX Operators are faced with the pressing need to improve indoor coverage. Contrary to common belief that WiMAX Modems are merely variables in the WiMAX subsystem, this whitepaper discusses how WiMAX
Modems can play a major role in the subsystem, particularly in improving indoor coverage.
Comcast Business Class Ethernet Dedicated Internet (EDI) Service
is a simple, reliable and more fl exible option to traditional private line
dedicated Internet access services, providing higher bandwidth and
increased efficiencies
Learn how to plan, evaluate, and implement wireless in demanding high density environments such as lecture halls, classrooms, and auditoriums. Learn how to evaluate end user throughput requirements and translate this into the number of channels required. Learn how to manage cell size, co-channel interference, and successfully apply these principles using Cisco's Unified Wireless Network.
Optimizing Cell Ddge Coverage Of Suburban/Rural Deployment With WiMAX Outdoor...Green Packet
Wireless broadband operators constantly face challenges of balancing the economics to deploy a robust and reliable wireless broadband service in suburban-rural areas or at cell-edges. Till to date, a large portion of these areas still remains hugely underserved or receiving unreliable coverage.
This paper in retrospect functions to further solidify the technological advantage of WiMAX, where we explore and proof the concept of suburban-rural deployment through the optimal pairing of a proper CPE strategy.
This paper explores deep into the technical and implementation advantages of an outdoor CPE solution, including the concept of antenna gain, transmission power, integrated POE design and environment-proof enclosure; and the effective advantage of Line of Sight performance and decreased penetration loss amongst other features of an outdoor CPE. We will also explore the misconception behind the high incremental cost, difficulty of engineering installation and service challenges in operations with the implementation of an outdoor CPE.
With worldwide mobile backhaul connections increasing from 5 to 10 Mbps in 2009 to 50 Mbps by 2012, mobile operators, network equipment vendors and others must implement new strategies to cope with the influx. Fiber, copper, microwave, millimeter wave—each backhaul medium has its own advantages and limitations in terms of availability, cost to deploy, operational cost, speed/distance and regulatory considerations. What is the right strategy for today’s 3G and emerging 4G ecosystem, and is there any hope of leveraging today's backhaul assets for three (let alone five) years?
In this webinar, Jennifer Pigg, Yankee Group research VP, examines the mobile backhaul solutions operators are deploying today and the emerging strategies for tomorrow.
This paper has been developed to provide an understanding the role of fibre optic communication technology associated with PON network infrastructure in next generation of Ultrafast Broad Band (UBB) architecture in Australia. Inside are details of technical strategies for many different PON infrastructures.
4G in the Enterprise
Kamal Garg Business Development, Converged Network Solutions (CNS) -Sprint Nextel
Todd Carothers Vice President, Product Management -CounterPath
Carl Silva Chief Scientist / Vice President Technology -Nexaira
Consumers have fallen in love with their smartphones and enterprise architects have found themselves with a whole new brand of headache. Providing for distributed computing with devices that are owned by your customers, employees and your executives, requires a lot of thought about how wireless broadband fits into your corporate environment. This session will explore the lessons of enabling wireless and wireline connectivity to corporate resources as well as the impact of Wireless Data on InBuilding Wireless Solutions and Strategies in a 4G world.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...Neo4j
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
SAP Sapphire 2024 - ASUG301 building better apps with SAP Fiori.pdfPeter Spielvogel
Building better applications for business users with SAP Fiori.
• What is SAP Fiori and why it matters to you
• How a better user experience drives measurable business benefits
• How to get started with SAP Fiori today
• How SAP Fiori elements accelerates application development
• How SAP Build Code includes SAP Fiori tools and other generative artificial intelligence capabilities
• How SAP Fiori paves the way for using AI in SAP apps
2. White Paper
Rev A. Mar 11.
Methods to Increase Throughput for Point-to-Point Links February 2010
Abstract
Today’s service providers and satellite operators are under substantial pressure to maximize profits and minimize costs while
providing customers improved reliability and higher capacity services. In the race to compete with industry peers, wireless
services and terrestrial capacity, service providers and operators must constantly look to improve bandwidth utilization and
user throughput to stay ahead. Advances in modulation, coding gain, fade adaptation and carrier cancelling technologies
can provide substantial savings in bandwidth, improved capacity, improved reliability, or all three, while maintaining
contracted service level agreements (SLAs). This paper summarizes the technical and financial benefits of these
technologies independently and in combination for several real world scenarios.
Introduction to Adaptive Coding and Modulation (ACM)
Adaptive Coding and Modulation is a statistical, non-static advantage that enables dynamic changes in user throughput.
Benefits and value vary over time and are not guaranteed, but are predictable. ACM technology converts link margin to an
increase in the data throughput of satellite links. Only non-synchronous data networks (such as Ethernet packet-based
networks) can take advantage of a dynamic data throughput rate. All satellite links are designed to function at a certain
annual availability. The closer to 100% we demand of our link availability, the more link margin we need to meet this
demand. Figure 1 below is a graph of availability vs. link margin of a Ku-Band link from Germany to Nigeria. A change in
guaranteed annual availability from 99.8% to 99.6% (as little as 0.2% per year) equates to 17.5 hours per year (365 Day *
24hours/day * .002 = 17.5 Hours).
In this link, it can be seen that these 17.5 hours/year demands or saves 2.5 dB of link margin. This means that someone
who requires 99.8% availability instead of 99.6% availability would need to factor and additional 2.5 dB of link margin for the
entire year. Conversely, deciding to run this link with 99.6% availability would save 2.5 dB of link margin for the entire year.
Figure 1: Ku-Band Link Margin (dB)
30
25
20
Margin (dB)
Margin (dB) 2.5 dB Margin
equates to 15
+/- 0.2% Availability
10
5
0
100 99.8 99.6 99.4 99.2 99
Annual Availibility
Different links have different link margin requirements. Consider a C-Band link between Italy and China with very different
link availability characteristics. In Figure 2 below you can clearly see that the same change from 99.6% availability to 99.8%
availability requires a mere 0.35 dB of additional link margin.
1|Page
Sandpiper House, Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8GX, UK
T +44 (0) 1256 812 222 F +44 (0) 1256 812 666 E sales@sematron.com Making waves...
www.sematron.com
3. White Paper
Rev A. Mar 11.
Methods to Increase Throughput for Point-to-Point Links February 2010
Figure 2: C-Band Link Margin (dB)
4.5
4
3.5
3
Margin (dB)
0.35 dB Margin 2.5
Margin (dB) equates to
+/- 0.2% Availability 2
1.5
1
0.5
0
100 99.8 99.6 99.4 99.2 99
Annual Availibility
Rain fade, inclined orbit satellite operation, antenna pointing errors, noise and interference can all degrade satellite link
conditions. All of these conditions determine the overall link margin of a system. Because ACM converts link margin to
additional user throughput, it can be clearly seen that the greater the link margin, the greater the benefit of ACM. As link
margin is reduced, so too is the value of ACM. It can also be stated that as guaranteed availability is increased, link margin
will also need to be increased. Conversely, as availability requirements are reduced, link margin will also be reduced and
the value of ACM will therefore be reduced.
Introduction to Double Talk Carrier in Carrier
Unlike ACM, DoubleTalk Carrier-in-Carrier technology is a calculable,
definitive and static advantage. Carrier-in-Carrier is based on Applied
Signal Technology’s DoubleTalk bandwidth compression technology.
DoubleTalk uses “Adaptive Cancellation,” a patented technology that
allows the transmit and receive carriers of a full-duplex satellite link to be
transmitted in the same transponder space. When combined with
advanced forward error correction and modulation techniques, DoubleTalk
Carrier-in-Carrier can deliver unprecedented operating expense savings.
In addition to operating expense (OPEX) savings, DoubleTalk Carrier-in-
Carrier can also provide capital expenditure (CAPEX) savings by allowing
a smaller BUC/HPA and/or antenna.
Figure 3: Conventional Full-Duplex Satellite Link
Figure 3 shows a conventional full-duplex satellite link, where two carriers
are adjacent to each other and centered and different frequencies. Figure
4 shows the typical DoubleTalk Carrier-in-Carrier operation, where the two
carriers are centered at the same frequency, thus sharing the same
spectrum. When observed over a spectrum analyzer, only the Composite
is visible. Carrier 1 and Carrier 2 are shown in Figure 4 for reference only.
DoubleTalk Carrier-in-Carrier is complementary to all advances in modem
technology, including advanced FEC and modulation techniques. As
these technologies approach theoretical limits of power and bandwidth
efficiencies, DoubleTalk Carrier-in-Carrier (utilizing advanced signal
processing techniques) provides a new dimension in bandwidth efficiency.
DoubleTalk Carrier-in-Carrier allows satellite users to achieve spectral
Figure 4: Duplex Link with DoubleTalk Carrier-in-Carrier
efficiencies (i.e. bps/Hz) that cannot be achieved with traditional links.
2|Page
Sandpiper House, Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8GX, UK
T +44 (0) 1256 812 222 F +44 (0) 1256 812 666 E sales@sematron.com Making waves...
www.sematron.com
4. White Paper
Rev A. Mar 11.
Methods to Increase Throughput for Point-to-Point Links February 2010
For example, DoubleTalk Carrier-in-Carrier when used with 16-QAM approaches the bandwidth efficiency of 256-QAM (8
bps/Hz).
As DoubleTalk Carrier-in-Carrier allows equivalent spectral efficiency using a lower order modulation and/or FEC code, it can
simultaneously reduce CAPEX by allowing a smaller BUC/HPA and/or antenna. DoubleTalk Carrier-in-Carrier can be used to
save transponder bandwidth and/or transponder power, thereby allowing successful deployment in bandwidth-limited as well
as power-limited scenarios.
Case Studies
Using the highly regarded Intelsat Lease Transmission Plan Program (LST) link budget tool and actual Intelsat satellites, we
have run four (4) satellite link budget scenarios. For the purpose of this exercise, all links in scenarios 1-3 require a duplex
guaranteed minimum 10 Mbps data rate. All calculations are made using only DVB-S2 modulation and coding combinations
to ensure there is no confusion between link budget operational points and inferior coding techniques. All BW figures use a
transmit filter figure of 0.27 to calculate occupied BW (= SR * 1.27). Scenario 4 is a special case study specific to E3 link
optimization.
Note that in all below scenarios, link margin remains consistent within each scenario. Link margin is directly related to link
availability and therefore it follows that link margin remains consistent when doing a true comparison of technologies,
weather you are running a conventional link, conventional link with ACM, Carrier-in-Carrier or Carrier-in-Carrier with ACM.
Definitions
[1] Occupied BW: This is the bandwidth that the carrier(s) actually occupy on the satellite. For conventional links, the
occupied BW is equal to the Symbol Rate of the carrier times one plus the filter figure (Occupied BW = 1.27 * SR). In CnC
links, when the carriers have equal symbol rates, we show the Occupied BW as (x.xx/2) because two carriers are using the
same physical BW. Note, regardless of rolloff or filter figures used, all comparisons will equally benefit or suffer by the same
percentage. This is a true comparison of technologies, not a misleading comparison using dissimilar criteria.
[2] Threshold Mod/Cod: In conventional links, this is the most spectrally efficient Mod/Cod with a QEF performance Es/No
that is at or BELOW the Threshold Es/No for the link. In CnC carriers, the Threshold Mod/Cod must be the most spectrally
efficient Mod/Cod with a QEF performance Es/No + CnC Es/No Penalty that is at or BELOW the Threshold Es/No for the
link.
[3] CnC Es/No Penalty: This is the undesired penalty that must be added to the Threshold Es/No to determine the Threshold
Mod/Cod that can be used when running CnC link budgets.
[4] Threshold Es/No Req: This is the worst case Es/No (most faded condition) the link will experience to accommodate the
availability of the link. The Threshold Es/No will be negatively impacted (lower) when Link Availability is increased 99.8% ->
99.9% and will be higher when Link Availability is decreased 99.9% -> 99.8%.
[5] Clear Sky Es/No: This is the best Es/No value (least faded condition) the link will ever experience with the given satellite,
earth station equipment, weather conditions etc.
[6] Link Margin: This is the difference between the Clear Sky Es/No and the Threshold Es/No. This is essentially the
maximum delta in dB between best and worst case fade conditions.
[7] Total Allocated BW: In conventional links this is the sum of the Occupied BW of Link A to B and Link B to A. In CnC
links, this is the larger of the two carriers, or if the carriers are the same size it is the sum of the Occupied BW of Link A to B
divided by 2. A satellite operator will charge for the larger of either Total Allocated BW or Total PEB.
[8] Total PEB BW: Total Power Equivalent Bandwidth (PEB) relates to the amount of total power used by the carriers
represented as a bandwidth equivalent. A satellite operator will charge for the larger of either Total Allocated BW or Total
PEB.
[9] Clear Sky Mod/Cod A to B: In conventional links, this is the most spectrally efficient Mod/Cod with a QEF performance
Es/No that is at or below the Clear Sky Es/No for the link A to B. In CnC carriers, it is the most spectrally efficient Mod/Cod
with a QEF performance Es/No + CnC Es/No Penalty that is at or below the Clear Sky Es/No for the link A to B.
[10] ACM Max DR A to B: This is the maximum data rate achievable in clear sky conditions. This is calculated by
multiplying the Clear Sky Mod/Cod A to B spectral efficiency with link A to B symbol rate or: Clear Sky Mod/Cod A to B
spectral efficiency with (link A to B Occupied BW / 1.27).
[11] Clear Sky Mod/Cod B to A: In conventional links, this is the most spectrally efficient Mod/Cod with a QEF performance
Es/No that is at or below the Clear Sky Es/No for the link B to A. In CnC carriers, it is the most spectrally efficient Mod/Cod
with a QEF performance Es/No + CnC Es/No Penalty that is at or below the Clear Sky Es/No for the link B to A.
3|Page
Sandpiper House, Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8GX, UK
T +44 (0) 1256 812 222 F +44 (0) 1256 812 666 E sales@sematron.com Making waves...
www.sematron.com
5. White Paper
Rev A. Mar 11.
Methods to Increase Throughput for Point-to-Point Links February 2010
[12] ACM Max DR B to A: This is the maximum data rate achievable in clear sky conditions. This is calculated by
multiplying the Clear Sky Mod/Cod B to A spectral efficiency with link B to A symbol rate or: Clear Sky Mod/Cod A to B
spectral efficiency with (link A to B Occupied BW / 1.27)
[13] Total DR Increase %: This is the difference between the minimum guaranteed DR (10 Mbps *2 = 20 Mbps) and the sum
of ACM Max DR A to B and ACM Max DR B to A as a percentage.
[14] Summary Section: BW/PEB is the greater of Total Allocated BW or Total Power Equivalent BW (it’s what the satellite
operator will base the per Hz price on).
Scenario 1
10 Mbps Synchronous fixed Data Rate duplex – Determine the best overall modulation technique when considering: (1)
synchronous data, (2) 99.95% link availability, and (3) Typical Ku-Band rain fade conditions.
System Configuration Information:
Station A Station A Station B Station B
Satellite Location Beam Txpdr Center Freq.
Location Antenna Location Antenna
IS-1002 359 °E 312 13.955 / 12.705 Tripoli, Libya 7.8 m Oran, Algeria 2.4 m
Scenario 1a: Conventional two (2) carrier link: No ACM Value
Occupied BW Threshold CnC Es/No Threshold Clear Sky Link Margin
[1] Mod/Cod [2] Penalty [3] Es/No Req.[4] Es/No [5] [6]
Link A to B 7.06 MHz 8-PSK 3/5 0.0 dB 6.7 dB 11.1 dB 4.5 dB
Link B to A 7.06 MHz 8-PSK 3/5 0.0 dB 6.7 dB 11.1 dB 4.5 dB
Clear Sky Clear Sky Total DR
Tot Alloc BW Tot PEB BW ACM Max DR ACM Max DR
Mod/Cod A to Mod/Cod B to Increase %
[7] [8] A to B [10] B to A [12]
B [9] A [11] [13]
14.12 MHz 12.81 MHz 8-PSK 3/5 10.0 Mbps 8-PSK 3/5 10.0 Mbps 0.0%
Scenario 1b: Carrier in Carrier link: No ACM Value
Threshold CnC Es/No Threshold Clear Sky
Occupied BW Link Margin
Mod/Cod Penalty Es/No Req. Es/No
Link A to B (9.52/2) MHz QPSK 2/3 0.3 dB 4.0 dB 8.5 dB 4.5 dB
Link B to A (9.52/2) MHz QPSK 2/3 0.3 dB 4.0 dB 8.5 dB 4.5 dB
Clear Sky Clear Sky Total ACM
ACM Max DR ACM Max DR
Tot Alloc BW Tot PEB BW Mod / Cod A Mod / Cod B DR Increase
A to B B to A
to B to A %
9.52 MHz 9.25 MHz QPSK 2/3 10.0 Mbps QPSK 2/3 10.0 Mbps 0.0%
Scenario 1 Summary (% Improvement vs. Conventional Link)
Conventional Conventional with CnC with ACM CnC with ACM (Max
[14] CnC without ACM
Link ACM (Reduced BW) Throughput)
BW / PEB 14.12 MHz 14.12 MHz (0.0%) 9.52 MHz (32.5%) 9.52 MHz (32.5%) N/A
Guar. DR 20 Mbps 20 Mbps (0.0%) 20 Mbps (0.0%) 20 Mbps (0.0%) N/A
Max DR 20 Mbps 20 Mbps (0.0%) 20 Mbps (0.0%) 20 Mbps (0.0%) N/A
Scenario 1 exemplifies a conventional synchronous circuit. Synchronous circuits and synchronous data interfaces, such as
G.703, RS422, and V.35, do not allow for variances in data rate once the circuit is established. They are static in throughput
and have strict clocking and timing requirements. For this reason, a statistical and dynamic technology such as ACM cannot
be used in these types of circuits and provides no value regardless of the available link margin.
As discussed earlier, Carrier-in-Carrier is a static technology that provides an unchanging advantage and proves to be of
substantial value in synchronous circuits. As seen in the Scenario 1 summary section, CnC without ACM provides a 32.5%
BW/PEB savings over a conventional link. In all other scenarios, the result is either unimproved or not applicable.
4|Page
Sandpiper House, Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8GX, UK
T +44 (0) 1256 812 222 F +44 (0) 1256 812 666 E sales@sematron.com Making waves...
www.sematron.com
6. White Paper
Rev A. Mar 11.
Methods to Increase Throughput for Point-to-Point Links February 2010
Financially Speaking: Assuming a cost per MHz of BW/PEB is $3000.00 USD per month, a service provider could save
$975/MHz * (14.12 – 9.52) = $4,485 per month or $53,820 per year by deploying CnC on this circuit.
Scenario 2
Guaranteed minimum 10 Mbps SLA duplex link – Determine the best overall modulation technique when considering: (1)
Asynchronous, packet-based Data, 2) Link 99.65% availability, and 3) Typical Ku-Band rain fade conditions.
System Configuration Information:
Station A Station A Station B Station B
Satellite Location Beam Txpdr Center Freq.
Location Antenna Location Antenna
IS-1002 359 °E 312 13.955 / 12.705 Tripoli, Libya 7.8 m Oran, Algeria 2.4 m
Scenario 2a: Conventional two (2) carrier link: Without and with ACM
Threshold CnC Es/No Threshold Clear Sky
Occupied BW Link Margin
Mod/Cod Penalty Es/No Req.[1] Es/No
Link A to B 5.64 MHz 8-PSK 3/4 0.0 dB 9.0 dB 10.6 dB 1.6 dB
Link B to A 4.76 MHz 16-APSK 2/3 0.0 dB 10.6 dB 12.1 dB 1.5 dB
Clear Sky Clear Sky Total ACM
ACM Max DR ACM Max DR
Tot Alloc BW Tot PEB BW Mod / Cod A Mod / Cod B DR increase
A to B B to A
to B to A %
10.40 MHz 9.84 MHz 16-APSK 2/3 11.8 Mbps 16-APSK 4/5 11.9 Mbps 18.5%
Scenario 2b: Carrier in Carrier link: Without and with ACM
Occupied BW Threshold CnC Es/No Threshold Clear Sky
Link Margin
[2] Mod/Cod Penalty Es/No Req. Es/No
Link A to B (14.1/2) MHz 8-PSK 3/5 0.3 dB 6.9 dB 8.4 dB 1.5 dB
Link B to A (14.1/2) MHz 8-PSK 3/5 0.3 dB 6.9 dB 8.4 dB 1.5 dB
Clear Sky Clear Sky Total ACM
ACM Max DR ACM Max DR
Tot Alloc BW Tot PEB BW Mod / Cod A Mod / Cod B DR increase
A to B B to A
to B to A %
7.05 MHz 6.62 MHz 8-PSK 2/3 11.1 Mbps 8-PSK 2/3 11.1 Mbps 11.0%
Scenario 2 Summary (% Improvement vs. Conventional Link)
Convention Conventional with CnC with ACM CnC with ACM (Max
CnC without ACM
Link ACM (Reduced BW) Throughput)
BW /
10.4 MHz 10.4 MHz (0.0%) 7.05 MHz (32.2%) 7.05 MHz (32.2%) 10.4 MHz (0.0%)
PEB
Guar.
20 Mbps 20 Mbps (0.0%) 20 Mbps (0.0%) 20 Mbps (0.0%) 29.5 Mbps (47.5%)
DR
Max
20 Mbps 23.7 Mbps (18.5%) 20 Mbps (0.0%) 22.2 Mbps (11.0%) 32.7 Mbps (63.5%)
DR
In Scenario 2, we can see that packet-based networks (when combined with ACM) can yield a higher data throughput. In
this scenario, however, due to the 99.65% Link Availability chosen (vs. 99.85% in scenario 1), the link margin needed is only
about 1.5 dB. Due to this lower link margin, we see only a minimal (18.5%) increase in data throughput due to ACM alone.
As shown in the column CnC with ACM (Reduced BW), Carrier-in-Carrier offers a 32.2% savings in allocated bandwidth,
plus an 11.0% increase in data throughput due to ACM.
Financially Speaking: Assuming a cost per MHz of BW/PEB is $3000.00 USD per month, a service provider could save
$966/MHz * (10.4 – 7.05) = $3,236 per month or $38,833 per year by deploying CnC and would increase user throughput by
an additional 2.2 Mbps for the majority of the year.
So, what happens if we convert the savings in bandwidth to additional throughput?
5|Page
Sandpiper House, Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8GX, UK
T +44 (0) 1256 812 222 F +44 (0) 1256 812 666 E sales@sematron.com Making waves...
www.sematron.com
7. White Paper
Rev A. Mar 11.
Methods to Increase Throughput for Point-to-Point Links February 2010
As seen in the CnC with ACM (Max Throughput) column of the Summary section, a user could choose to convert BW
savings into additional throughput by running a 10.4 MHz CnC link (equivalent to the Scenario 2a Total allocated BW). Even
in the most highly faded condition, running 8-PSK 3/5 Mod/Cod, CnC alone would give the user 29.5 Mbps of capacity (14.7
Mbps each way). This is a 47.5% increase over the 20 Mbps guaranteed SLA. CnC, without ACM, in a highly faded link
condition provides a 29% throughput advantage over ACM in CLEAR SKY CONDITIONS!
When clear sky conditions do arise, CnC with ACM will run at Mod/Cod 8-PSK 2/3 offering 32.7 Mbps of capacity (16.3 Mbps
each way). This is 63.5% over the contracted SLA figure of 20 Mbps and 45% better than ACM alone.
As we are running a BW limited link (being charged by BW not by PEB or power), we know that the cost per month for the
CnC 10.4 MHz is the same as the Conventional (non CnC) 10.4 MHz and we have now increased our Data Rate capacity by
up to 63.5% over our SLA.
When looking at all available options, it is clear that CnC combined with ACM provides the best overall result.
Scenario 3
Guaranteed minimum 10 Mbps SLA duplex link – Determining the best overall modulation technique when considering: 1)
Asynchronous, packet-based, Data Link, 2) 99.7% availability, and 3) Ku-Band rain fade conditions in severe rain fade
locations.
System Configuration Information:
Station A Station A Station B Station B
Satellite Location Beam Txpdr Center Freq.
Location Antenna Location Antenna
332.5 Abidjan, Côte
IS-907 71 14.0425 / 10.9925 7.8 m Lome, Togo 2.4 m
°E d'Ivoire
Scenario 3a: Conventional two (2) carrier link: Without and with ACM
Guaranteed CnC Es/No Threshold Clear Sky
Occupied BW Link Margin
Mod/Cod Penalty Es/No Req.[1] Es/No
Link A to B 6.35 MHz 8-PSK 2/3 0.0 dB 7.8 dB 15.9 dB 8.1 dB
Link B to A 4.23 MHz 16-APSK 3/4 0.0 dB 11.7 dB 18.6 dB 6.9 dB
Clear Sky Clear Sky Total ACM
ACM Max DR ACM Max DR
Tot Alloc BW Tot PEB BW Mod / Cod A Mod / Cod B DR increase
A to B B to A
to B to A %
10.58 MHz 10.15 MHz 32-APSK 5/6 20.8 Mbps 32-APSK 9/10 14.9 Mbps 78.5%
Scenario 3b: Carrier in Carrier link: Without and with ACM
Occupied BW Threshold CnC Es/No Threshold Clear Sky
Link Margin
[2] Mod/Cod Penalty Es/No Req. Es/No
Link A to B (14.1/2) MHz 8-PSK 3/5 0.3 dB 6.9 dB 14.9 dB 8.0 dB
Link B to A (14.1/2) MHz 8-PSK 3/5 0.3 dB 6.9 dB 13.8 dB 6.9 dB
Clear Sky Clear Sky Total ACM
ACM Max DR ACM Max DR
Tot Alloc BW Tot PEB BW Mod / Cod A Mod / Cod B DR increase
A to B B to A
to B to A %
7.05 MHz 7.53 MHz 32-APSK 3/4 20.8 Mbps 16-APSK 5/6 18.5 Mbps 96.5%
Scenario 3 Summary (% Improvement vs. Conventional Link)
Conventional Conventional with CnC with ACM CnC with ACM (Max
CnC without ACM
Link ACM (Reduced BW) Throughput)
BW / PEB 10.58 MHz 10.58 MHz (0.0%) 7.53 MHz (28.8%) 7.53 MHz (28.8%) 9.90 MHz (0.0%)*
Guar. DR 20 Mbps 20.0 Mbps (0.0%) 20 Mbps (0.0%) 20 Mbps (0.0%) 28 Mbps (40.0%)
Max DR 20 Mbps 35.7 Mbps (78.5%) 20 Mbps (0.0%) 39.3 Mbps (96.5%) 55.1 Mbps (175%)
In Scenario 3 we see that packet-based networks running ACM can improve data throughput by a significant amount. In this
scenario, a 99.7% Link Availability, Ku-Band operation, and a combination of geographical locations that experience severe
fade conditions creates a Link Margin demand of 6.9 to 8.1 dB. Due to this high link margin, we see substantial (78.5%)
increase in data throughput due to ACM alone.
6|Page
Sandpiper House, Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8GX, UK
T +44 (0) 1256 812 222 F +44 (0) 1256 812 666 E sales@sematron.com Making waves...
www.sematron.com
8. White Paper
Rev A. Mar 11.
Methods to Increase Throughput for Point-to-Point Links February 2010
Carrier in Carrier offers a 28.8% savings in allocated bandwidth combined with a 96.5% increase in data throughput due to
ACM as seen in the CnC with ACM (Reduced BW) column. It can be seen that in this scenario the increase in data rate due
to ACM was slightly higher in the CnC with ACM (Reduced BW) circuit than in the ACM only circuit (96.5% vs. 78.5%). The
reason for this is quite simple. The Link margin of 6.9 dB (scenario 3a Link B to A) available in clear sky conditions far
exceeded the most efficient Mod/Cod (32-APSK 9/10) Es/No requirement and, therefore, could not be further converted to
increased capacity. This is another advantage of using CnC technology in combination with ACM. In virtually all CnC
circuits a lower mod/cod can be used as we are spreading the signal, requiring a lower Es/No but over a larger occupied
BW. As can be seen in the graph below, when you can attain your minimum SLA by using a mod/cod that requires a lower
Es/No, more link margin can be converted to user throughput.
Furthermore, as you can see in the “Ideal” spectral efficiency vs. Es/No graph below, for every 5 dB of change in Es/No,
there is roughly an increase of 1.6 to 1.8 times the spectral efficiency. Meaning, for every 5dB of link margin, in an ideal
DVB-S2 implementation, throughput should increase by 60 to 80% regardless of where you begin (Threshold Es/No).
Financially Speaking: Assuming a cost per MHz of BW/PEB is $3000.00 USD per month, a service provider could save
$864/MHz * (10.58 – 7.53) = $2,635 per month or $31,622 per year by deploying CnC and would increase user throughput
by an additional 19.3 Mbps for the majority of the year.
As we have done in Scenario 2, let us see what happens if we convert the savings in bandwidth to additional throughput. In
Scenario 3, the CnC link is power limited, running a 7.05 MHz carrier is equivalent to using 7.53 MHz PEB. For this reason,
we need to compare a 9.9 MHz (Total Allocated BW) CnC link equating to a 10.58 MHz BW/PEB, as this will give us a
realistic equivalent satellite cost.
As seen in the CnC with ACM (Max Throughput) column of the Summary section, a user could choose to convert BW
savings into additional throughput by running a 9.9 MHz CnC link. In the most highly faded condition, running 8-PSK 3/5
Mod/Cod in both directions, CnC alone would give the user 28.0 Mbps of capacity (14.0 Mbps each way). This is a 40.0%
increase over the 20 Mbps guaranteed SLA even in the most faded of conditions (where ACM will provide little to no value).
When clear sky conditions do arise, CnC with ACM will run at Mod/Cod 32-APSK ¾ in one direction and 16-APSK 5/6 in the
opposite direction offering 55.1 Mbps of capacity (29.2 Mbps A to B, 25.9 Mbps B to A). This is 175% over the contracted
SLA figure of 20 Mbps and 96.5% better than ACM alone.
Again, it is clear that DoubleTalk Carrier-in-Carrier combined with ACM provides the best overall result.
7|Page
Sandpiper House, Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8GX, UK
T +44 (0) 1256 812 222 F +44 (0) 1256 812 666 E sales@sematron.com Making waves...
www.sematron.com
9. White Paper
Rev A. Mar 11.
Methods to Increase Throughput for Point-to-Point Links February 2010
Scenario 4 (E3 Link Optimization)
E3 (34.368 Mbps) Synchronous fixed Data Rate duplex – Determine the best overall modulation technique when
considering: (1) synchronous 34.368 Mbps E3 data, (2) 99.95% link availability, and (3) Typical Ku-Band rain fade
conditions.
System Configuration Information:
Station A Station A Station B Station B
Satellite Location Beam Txpdr Center Freq.
Location Antenna Location Antenna
IS-1002 359 °E 312 13.955 / 12.705 Tripoli, Libya 7.8 m Oran, Algeria 2.4 m
Scenario 4a (E3): Conventional two (2) carrier link: No ACM Value
Threshold CnC Es/No Threshold Clear Sky
Occupied BW Link Margin
Mod/Cod Penalty Es/No Req. Es/No
Link A to B 24.25 MHz 8-PSK 3/5 0.0 dB 6.7 dB 11.1 dB 4.5 dB
Link B to A 24.25 MHz 8-PSK 3/5 0.0 dB 6.7 dB 11.1 dB 4.5 dB
Clear Sky Clear Sky
ACM Max DR ACM Max DR Total DR
Tot Alloc BW Tot PEB BW Mod/Cod A Mod/Cod B
A to B B to A Increase %
to B to A
48.50 MHz 44.03 MHz 8-PSK 3/5 34.368 Mbps 8-PSK 3/5 34.368 Mbps 0.0%
Scenario 4b (E3): Carrier in Carrier link: No ACM Value
Threshold CnC Es/No Threshold Clear Sky
Occupied BW Link Margin
Mod/Cod Penalty Es/No Req. Es/No
Link A to B (65.47/2) MHz QPSK 2/3 0.3 dB 4.0 dB 8.5 dB 4.5 dB
Link B to A (65.47/2) MHz QPSK 2/3 0.3 dB 4.0 dB 8.5 dB 4.5 dB
Clear Sky Clear Sky Total ACM
ACM Max DR ACM Max DR
Tot Alloc BW Tot PEB BW Mod / Cod Mod / Cod DR Increase
A to B B to A
A to B B to A %
32.73 MHz 31.80 MHz QPSK 2/3 34.368 Mbps QPSK 2/3 34.368 Mbps 0.0%
Scenario 4 (E3) Summary (% Improvement vs. Conventional Link)
Conventional Conventional with CnC with ACM CnC with ACM
CnC without ACM
Link ACM (Reduced BW) (Max Throughput)
BW / PEB 48.50 MHz 48.50 MHz (0.0%) 32.73 MHz (32.5%) 32.73 MHz (32.5%) N/A
Guar. DR 34.368 Mbps 34.368 Mbps (0.0%) 34.368 Mbps (0.0%) 34.368 Mbps (0.0%) N/A
Max DR 34.368 Mbps 34.368 Mbps (0.0%) 34.368 Mbps (0.0%) 34.368 Mbps (0.0%) N/A
Scenario 4, as with scenario 1, exemplifies a conventional synchronous circuit. E3 circuits and synchronous data interfaces,
such as G.703 do not allow for variances in data rate once the circuit is established. They are static in throughput and have
strict clocking and timing requirements. For this reason, a statistical and dynamic technology such as ACM cannot be used
in these types of circuits and provides no value regardless of the available link margin.
Carrier-in-Carrier’s static benefit provides an unchanging advantage and proves to be of substantial value in E3 circuits. As
seen in the Scenario 4 summary section, CnC without ACM provides a 32.5% BW/PEB savings over a conventional link. In
all other scenarios, the result is either unimproved or not applicable.
Financially Speaking: Assuming a cost per MHz of BW/PEB is $3000.00 USD per month, a service provider could save
$975/MHz * (48.50 – 32.73) = $15,375 per month or $184,500 per year by deploying CnC on this circuit.
8|Page
Sandpiper House, Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8GX, UK
T +44 (0) 1256 812 222 F +44 (0) 1256 812 666 E sales@sematron.com Making waves...
www.sematron.com
10. White Paper
Rev A. Mar 11.
Methods to Increase Throughput for Point-to-Point Links February 2010
Conclusion
When considering bandwidth conservation, user data throughput maximization or a combination of the two, there are many
choices and technologies available. Synchronous circuits greatly benefit by using Carrier-in-Carrier’s definitive and static
BW/PEB savings, and cannot benefit through the use of ACM. Non Synchronous, packet-based circuits can be improved by
ACM, but these improvements are even more substantial when a combination of ACM and Carrier-in-Carrier technologies
are deployed.
Comtech EF Data has a team of sales engineering personnel who can help analyze the benefits of using these advanced
technologies on your existing or newly provisioned links. Please contact us for more information.
Email: sales@comtechefdata.com
Voice: 480.333.2200
Fax: 480.333.2540
Web: www.comtechefdata.com
9|Page
Sandpiper House, Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8GX, UK
T +44 (0) 1256 812 222 F +44 (0) 1256 812 666 E sales@sematron.com Making waves...
www.sematron.com