The document summarizes some of the technologies used to construct a film project. A Canon EOS 600D camera was used, which could record in 1080p and allowed clear viewing of mise en scene elements. ISO settings on the camera were used to achieve a darker look for scenes set in dark rooms. A tripod helped keep the camera steady during tilting and panning shots. LED lights were used to adjust lighting after darkening scenes with ISO settings to achieve the desired brightness.

1. What have you learnt about
technologies from the process of
constructing this product?

2. Camera:
The camera we used was a Canon EOS 600D.
It lets you record in 1080p, letting you see all the
mise en scene features clearly. Which was
needed in our opening as the mise en scene
contributed to our genre.
Most of the films we had research often had
dark settings so to achieve the dark room look,
we used the ISO settings to make it darker so we
could film the boss scene.
We were also able to convert the focus from manual to auto-focus and back again if
needed. We mainly used auto-focus throughout as we needed everything in the
scene to be in focus.

3. Tripod
The tripod helped us keep the camera in place in order to keep
the footage steady, especially when tilting and panning . The
height could be adjusted in different ways, such as the
centre column and the leg braces.
LED Lights
Eventhough we had used ISO settings to make it
dark, we had to get the lighting exactly how we
wanted it otherwise it would be too dark. You could
change the brightness which helped us to dim the
brightness.