This document discusses utilizing unidirectional security gateways to achieve cyber security. It introduces Waterfall Security Solutions, which provides unidirectional gateway technology. These gateways allow information to flow from protected industrial networks to external networks like business networks, preventing any return path for attacks. The document outlines the need to protect critical infrastructure from cyber threats and presents scenarios where gateways can help. It then reviews limitations of traditional IT security practices and how the Waterfall solution meets best practices. Real-world use cases and benefits like compliance, cost recovery and support for industrial applications/protocols are also covered.
Unidirectional Security, Andrew Ginter of Waterfall Security Digital Bond
This presentation reviews the spectrum of perimeter solutions based on unidirectional technology - solutions that are being deployed to protect the safety and reliability of industrial control systems. Learn why the technology is truly unidirectional based on physics and different ways it can be used in SCADA and DCS.
Many practitioners find parts of the spectrum to be counter-intuitive. Further, some parts of the spectrum are straightforward to deploy, and others require that practitioners take some care to ensure that the results really are as strong as they should be. Technologies and techniques covered include unidirectional gateways, secure bypass, temporary/programmed gateway reversals, opposing gateways, secure remote access, and parallel operations and IT WANs.
This document discusses how unidirectional security gateways can maximize security and minimize compliance costs for industrial control systems. It argues that firewalls are porous and all firewalls forward attacks, while unidirectional gateways break the bidirectional channel required for most attacks. The document provides several examples of how unidirectional gateways can be applied in industrial environments and claims they provide stronger security than firewalls while also helping to reduce costs associated with NERC CIP compliance standards.
ICS Security from the Plant Floor Up - A Controls Engineers Approach to Secur...Digital Bond
The presentation covers assessment, implementation methodology, and current level of success for addressing four key objectives which are protecting the controls fieldbus (networks) from untrusted networks (domain), secure and safe remote support capability from both inside and outside of the company, control supplier access to manufacturing equipment when onsite, and protect manufacturing systems from Malware and intrusion. This system isn’t theoretical, it’s in broad use and full critical production. If the time and connectivity is available a quick remote access demonstration can be given. The presentation will wrap up with a series of thoughts and ideas that occur to me regarding security in general as I listen to other organizations and groups talking about various security needs and activities.
Tatsuaki Takebe of Yokogawa Electric Corporation provides the closing keynote with a focus on international standards activity and how it affects the Japanese ICS community.
Liam Randall of Critical Stack at S4x15 Operation Technology Day. Liam is a Bro guru and describes how it can be used to monitor communications, detect attacks and analyze data.
Securing Critical Iot Infrastructure, IoT Israel 2014iotisrael
This document discusses NextNine's centralized OT security management solution for distributed ICS/SCADA environments. It provides an overview of NextNine's experience in industrial cybersecurity, describes some notable industrial cyber attacks that have occurred, and outlines the challenges of securing multi-site ICS/SCADA environments. The document also presents NextNine's solution for centralized OT security management across distributed systems through a virtual security engine and security center.
Mitigating Risk for the Mobile Worker: Novell ZENworks Endpoint Security Mana...Novell
Mobility is a fact of organizational life, and administrators have a business imperative to make their end users as productive on the go as they are in the office. But mobile productivity can't come at the expense of security. Attend this session to learn about Novell ZENworks Endpoint Security Management and its role in enabling secure mobile productivity. Keeping your network safe, your data protected and you users productive is more important than ever. Learn how you do all three with comprehensive and centralized endpoint security management solutions from Novell.
Unidirectional Security, Andrew Ginter of Waterfall Security Digital Bond
This presentation reviews the spectrum of perimeter solutions based on unidirectional technology - solutions that are being deployed to protect the safety and reliability of industrial control systems. Learn why the technology is truly unidirectional based on physics and different ways it can be used in SCADA and DCS.
Many practitioners find parts of the spectrum to be counter-intuitive. Further, some parts of the spectrum are straightforward to deploy, and others require that practitioners take some care to ensure that the results really are as strong as they should be. Technologies and techniques covered include unidirectional gateways, secure bypass, temporary/programmed gateway reversals, opposing gateways, secure remote access, and parallel operations and IT WANs.
This document discusses how unidirectional security gateways can maximize security and minimize compliance costs for industrial control systems. It argues that firewalls are porous and all firewalls forward attacks, while unidirectional gateways break the bidirectional channel required for most attacks. The document provides several examples of how unidirectional gateways can be applied in industrial environments and claims they provide stronger security than firewalls while also helping to reduce costs associated with NERC CIP compliance standards.
ICS Security from the Plant Floor Up - A Controls Engineers Approach to Secur...Digital Bond
The presentation covers assessment, implementation methodology, and current level of success for addressing four key objectives which are protecting the controls fieldbus (networks) from untrusted networks (domain), secure and safe remote support capability from both inside and outside of the company, control supplier access to manufacturing equipment when onsite, and protect manufacturing systems from Malware and intrusion. This system isn’t theoretical, it’s in broad use and full critical production. If the time and connectivity is available a quick remote access demonstration can be given. The presentation will wrap up with a series of thoughts and ideas that occur to me regarding security in general as I listen to other organizations and groups talking about various security needs and activities.
Tatsuaki Takebe of Yokogawa Electric Corporation provides the closing keynote with a focus on international standards activity and how it affects the Japanese ICS community.
Liam Randall of Critical Stack at S4x15 Operation Technology Day. Liam is a Bro guru and describes how it can be used to monitor communications, detect attacks and analyze data.
Securing Critical Iot Infrastructure, IoT Israel 2014iotisrael
This document discusses NextNine's centralized OT security management solution for distributed ICS/SCADA environments. It provides an overview of NextNine's experience in industrial cybersecurity, describes some notable industrial cyber attacks that have occurred, and outlines the challenges of securing multi-site ICS/SCADA environments. The document also presents NextNine's solution for centralized OT security management across distributed systems through a virtual security engine and security center.
Mitigating Risk for the Mobile Worker: Novell ZENworks Endpoint Security Mana...Novell
Mobility is a fact of organizational life, and administrators have a business imperative to make their end users as productive on the go as they are in the office. But mobile productivity can't come at the expense of security. Attend this session to learn about Novell ZENworks Endpoint Security Management and its role in enabling secure mobile productivity. Keeping your network safe, your data protected and you users productive is more important than ever. Learn how you do all three with comprehensive and centralized endpoint security management solutions from Novell.
Case Study: Running a DCS in a Highly Virtualized Environment, Chris Hughes o...Digital Bond
This session will cover the pro's and con's of virtualization as well as lessons learned from real world virtualization of DCS environments. Chris has deployed virtualization in ICS with and without ICS vendor cooperation.
Process Whitelisting and Resource Access Control For ICS Computers, Kuniyasu ...Digital Bond
Kuniyasu Suzaki presented on using process whitelisting and resource access control on industrial control system (ICS) computers. He explained that as ICS systems have moved from specialized to commodity operating systems, whitelisting can be used to lock down the OS and limit vulnerabilities. He described how whitelisting restricts process creation and computing resource access to only approved processes and resources. Suzaki provided examples of whitelist rules and discussed implementing whitelisting on Windows. He concluded that whitelisting offers predictable delays suitable for ICS while limiting potential malware activities.
A joint presentation of Gary Williams of Schneider Electric and Michael Coden of NextNine at the 10th Annual Conference of the American Petroleum institute. The presentation discusses benefits, disadvantages, and architectures for allowing 3rd party access.
Yokogawa & NextNine – Lessons Learned: Global Cybersecurity Management System...Honeywell
A joint presentation of Yokogawa and NextNine about a 60-site global cybersecurity deployment, including what went right, what went wrong, necessary changes to the processes and technology, and the new technology was developed.
Attacking and Defending Autos Via OBD-II from escar AsiaDigital Bond
This document discusses security issues related to accessing and controlling vehicles via OBD-II ports, drawing comparisons to struggles securing industrial control systems. It notes that accessing these systems often means compromising them, as protocols were designed without security. While an analysis of a Progressive Snapshot dongle found no security precautions, lessons from securing critical infrastructure suggest restricting access and implementing least privilege. The document advocates learning from past ICS mistakes to develop secure vehicle protocols and modules.
Andrew Ginter, Waterfall's VP Industrial Security speaks to three networks at the DHS ICSJWG 2019 event in Springfield, MA. Secure sites, however, generally do not use three security standards - two are unavoidable and three is two too many.
Vulnerability Inheritance in ICS (English)Digital Bond
This document discusses vulnerability inheritance in programmable logic controllers (PLCs) from third-party libraries and software. It provides a specific example of vulnerabilities found in the CoDeSys runtime and engineering software used by hundreds of industrial control system vendors. The document outlines how two major Japanese PLC vendors were found to be affected by these vulnerabilities due to their use of CoDeSys, and concludes that vendors need to implement secure development practices like security testing to prevent inheriting vulnerabilities from third-party components.
ForeScout CounterACT is a network access control platform that provides visibility, security, and productivity for networks. It identifies devices on the network, including managed and unmanaged devices, and enforces granular policies to automate control of network access. CounterACT is easy to deploy with no software or agents required, and it integrates with existing IT infrastructure. It offers comprehensive network visibility, security, and policy-based access control.
This presentation explains the ANSI/ISA-99 and IEC 62443 standards for industrial control systems (ICS). It describes the Zone and Conduit security model and how it is used in an plant or factory. As well, the issues of security configuration errors are discussed. A case history of zone security deployment for a Safety Integrated System in a refinery is provided. For additional information see www.tofinosecurity.com.
[CLASS 2014] Palestra Técnica - Michael FirstenbergTI Safe
Título da Palestra: Inovando na segurança de perímetro industrial: revolucionando a segurança de perímetro SCADA com tecnologias que são mais fortes que Firewalls
Active Directory in ICS: Lessons Learned From The FieldDigital Bond
This document provides lessons learned from implementing Active Directory domains in control system environments. It covers topics like time synchronization, DNS, Active Directory replication, domain controller maintenance, backup and restore, user and group guidelines, and ICS group policy. The key lessons are: accurate time sync is critical; DNS configuration on domain controllers must include the loopback address; Active Directory replication links need to be properly configured; flexible single master operations roles should be transferred before domain controller maintenance; individual user accounts should be used instead of shared administrator accounts; and group policy can be used to apply security settings to control systems. The presentation provides guidance on best practices, common problems encountered, and their solutions.
Does your system run the risk of being attacked?
There is an increasing risk world-wide of sophisticated cyber-attacks being targeted towards critical infrastructure. A successful attack on these networks could have a substantial impact on our society, causing great economic loss or worse. Regardless of if you are upgrading an existing network or building a new one, the security of it should be a major consideration.
Micro-segmentation is a combination of firewalls, subnetting, and using VPNs to create an extremely secure network by locking down each individual device. A system which has implemented micro-segmentation enjoy benefits such as maintaining application security, reduce the attack surface and complying with regulations.
Using Cyber-Vulnerability Assessment (CVA) to Optimize Control System Upgrade...Jim Gilsinn
Presented @ Emerson Exchange
October 7, 2014
Industrial control systems (ICS) are large information technology (IT) systems. Office IT systems, failure of ICS can cause plant outages and even physical damage. Management of ICS needs to be different and smarter. IT vendors frequently recommend patches and configuration changes. Most have no impact to the ICS, which cannot implement changes in real time. ICS typically get one chance every few years to make changes - the turnaround. This paper describes optimization of ISC turnaround work, using cyber-vulnerability assessment to focus turnaround work to only what is necessary.
Critical Infrastructure Security by Subodh BelgiClubHack
Industrial Automation & Control Systems are an integral part of various manufacturing & process industries as well as national critical infrastructure. Concerns regarding cyber-security of control systems are related to both the legacy nature of some of the systems as well as the growing trend to connect industrial control systems to corporate networks. These concerns have led to a number of identified vulnerabilities and have introduced new categories of threats that have not been seen before in the industrial control systems domain. Many of the legacy systems may not have appropriate security capabilities that can defend against modern day threats, and the requirements for availability and performance can preclude using contemporary cyber-security solutions. To address cyber-security issues for industrial control systems, a clear understanding of the security challenges and specific defensive countermeasures is required. The session will highlight some of the latest cyber security risks faced by industrial automation and control systems along with essential security controls & countermeasures.
Using Assessment Tools on ICS (English)Digital Bond
Dale Peterson of Digital Bond describes the methodology of using security assessment tools on an operational ICS. He also discusses how to best use the features and functions of these tools.
Open Platform for ICS Cybersecurity Research and EducationEnergySec
The CybatiWorks open platform serves as an educational environment for cyber-physical systems. The living laboratory platform uses low cost I/O, embedded devices, virtual machines and authentic automation protocols for participant cybersecurity education. The platform incorporates the Raspberry PI, PiFace I/O, Elenco Snap-Circuits, Fischertechnik components and an ICS-ified Kali Linux called CybatiWorks-1 to allow participants to build, break and cybersecure small control environments. CYBATI has performed years of research to develop this platform and is making it available for early access, school sponsorship and integrated education via the Kickstarter project announced during the session.
SCADA Security: The Five Stages of Cyber GriefLancope, Inc.
The document summarizes the five stages of grief experienced by organizations when they realize their critical infrastructure systems are connected to the internet and vulnerable to cyber attacks: denial, anger, bargaining, depression, and acceptance. It provides examples to illustrate why each stage occurs, such as discoveries of thousands of exposed SCADA and ICS devices online using tools like SHODAN, high-profile attacks like Stuxnet targeting critical infrastructure systems, and challenges of keeping outdated systems patched against emerging threats. The document argues organizations must ultimately accept the interconnected nature of systems and find new ways to design and manage critical infrastructure that are more secure and resilient to cyber attacks.
Подробный отчет из которого можно узнать:
- какие инструменты были использованы
- как были потрачены средства
- как проходила уличная агитация
- как и какая закупалась реклама
http://report.navalny.ru
Case Study: Running a DCS in a Highly Virtualized Environment, Chris Hughes o...Digital Bond
This session will cover the pro's and con's of virtualization as well as lessons learned from real world virtualization of DCS environments. Chris has deployed virtualization in ICS with and without ICS vendor cooperation.
Process Whitelisting and Resource Access Control For ICS Computers, Kuniyasu ...Digital Bond
Kuniyasu Suzaki presented on using process whitelisting and resource access control on industrial control system (ICS) computers. He explained that as ICS systems have moved from specialized to commodity operating systems, whitelisting can be used to lock down the OS and limit vulnerabilities. He described how whitelisting restricts process creation and computing resource access to only approved processes and resources. Suzaki provided examples of whitelist rules and discussed implementing whitelisting on Windows. He concluded that whitelisting offers predictable delays suitable for ICS while limiting potential malware activities.
A joint presentation of Gary Williams of Schneider Electric and Michael Coden of NextNine at the 10th Annual Conference of the American Petroleum institute. The presentation discusses benefits, disadvantages, and architectures for allowing 3rd party access.
Yokogawa & NextNine – Lessons Learned: Global Cybersecurity Management System...Honeywell
A joint presentation of Yokogawa and NextNine about a 60-site global cybersecurity deployment, including what went right, what went wrong, necessary changes to the processes and technology, and the new technology was developed.
Attacking and Defending Autos Via OBD-II from escar AsiaDigital Bond
This document discusses security issues related to accessing and controlling vehicles via OBD-II ports, drawing comparisons to struggles securing industrial control systems. It notes that accessing these systems often means compromising them, as protocols were designed without security. While an analysis of a Progressive Snapshot dongle found no security precautions, lessons from securing critical infrastructure suggest restricting access and implementing least privilege. The document advocates learning from past ICS mistakes to develop secure vehicle protocols and modules.
Andrew Ginter, Waterfall's VP Industrial Security speaks to three networks at the DHS ICSJWG 2019 event in Springfield, MA. Secure sites, however, generally do not use three security standards - two are unavoidable and three is two too many.
Vulnerability Inheritance in ICS (English)Digital Bond
This document discusses vulnerability inheritance in programmable logic controllers (PLCs) from third-party libraries and software. It provides a specific example of vulnerabilities found in the CoDeSys runtime and engineering software used by hundreds of industrial control system vendors. The document outlines how two major Japanese PLC vendors were found to be affected by these vulnerabilities due to their use of CoDeSys, and concludes that vendors need to implement secure development practices like security testing to prevent inheriting vulnerabilities from third-party components.
ForeScout CounterACT is a network access control platform that provides visibility, security, and productivity for networks. It identifies devices on the network, including managed and unmanaged devices, and enforces granular policies to automate control of network access. CounterACT is easy to deploy with no software or agents required, and it integrates with existing IT infrastructure. It offers comprehensive network visibility, security, and policy-based access control.
This presentation explains the ANSI/ISA-99 and IEC 62443 standards for industrial control systems (ICS). It describes the Zone and Conduit security model and how it is used in an plant or factory. As well, the issues of security configuration errors are discussed. A case history of zone security deployment for a Safety Integrated System in a refinery is provided. For additional information see www.tofinosecurity.com.
[CLASS 2014] Palestra Técnica - Michael FirstenbergTI Safe
Título da Palestra: Inovando na segurança de perímetro industrial: revolucionando a segurança de perímetro SCADA com tecnologias que são mais fortes que Firewalls
Active Directory in ICS: Lessons Learned From The FieldDigital Bond
This document provides lessons learned from implementing Active Directory domains in control system environments. It covers topics like time synchronization, DNS, Active Directory replication, domain controller maintenance, backup and restore, user and group guidelines, and ICS group policy. The key lessons are: accurate time sync is critical; DNS configuration on domain controllers must include the loopback address; Active Directory replication links need to be properly configured; flexible single master operations roles should be transferred before domain controller maintenance; individual user accounts should be used instead of shared administrator accounts; and group policy can be used to apply security settings to control systems. The presentation provides guidance on best practices, common problems encountered, and their solutions.
Does your system run the risk of being attacked?
There is an increasing risk world-wide of sophisticated cyber-attacks being targeted towards critical infrastructure. A successful attack on these networks could have a substantial impact on our society, causing great economic loss or worse. Regardless of if you are upgrading an existing network or building a new one, the security of it should be a major consideration.
Micro-segmentation is a combination of firewalls, subnetting, and using VPNs to create an extremely secure network by locking down each individual device. A system which has implemented micro-segmentation enjoy benefits such as maintaining application security, reduce the attack surface and complying with regulations.
Using Cyber-Vulnerability Assessment (CVA) to Optimize Control System Upgrade...Jim Gilsinn
Presented @ Emerson Exchange
October 7, 2014
Industrial control systems (ICS) are large information technology (IT) systems. Office IT systems, failure of ICS can cause plant outages and even physical damage. Management of ICS needs to be different and smarter. IT vendors frequently recommend patches and configuration changes. Most have no impact to the ICS, which cannot implement changes in real time. ICS typically get one chance every few years to make changes - the turnaround. This paper describes optimization of ISC turnaround work, using cyber-vulnerability assessment to focus turnaround work to only what is necessary.
Critical Infrastructure Security by Subodh BelgiClubHack
Industrial Automation & Control Systems are an integral part of various manufacturing & process industries as well as national critical infrastructure. Concerns regarding cyber-security of control systems are related to both the legacy nature of some of the systems as well as the growing trend to connect industrial control systems to corporate networks. These concerns have led to a number of identified vulnerabilities and have introduced new categories of threats that have not been seen before in the industrial control systems domain. Many of the legacy systems may not have appropriate security capabilities that can defend against modern day threats, and the requirements for availability and performance can preclude using contemporary cyber-security solutions. To address cyber-security issues for industrial control systems, a clear understanding of the security challenges and specific defensive countermeasures is required. The session will highlight some of the latest cyber security risks faced by industrial automation and control systems along with essential security controls & countermeasures.
Using Assessment Tools on ICS (English)Digital Bond
Dale Peterson of Digital Bond describes the methodology of using security assessment tools on an operational ICS. He also discusses how to best use the features and functions of these tools.
Open Platform for ICS Cybersecurity Research and EducationEnergySec
The CybatiWorks open platform serves as an educational environment for cyber-physical systems. The living laboratory platform uses low cost I/O, embedded devices, virtual machines and authentic automation protocols for participant cybersecurity education. The platform incorporates the Raspberry PI, PiFace I/O, Elenco Snap-Circuits, Fischertechnik components and an ICS-ified Kali Linux called CybatiWorks-1 to allow participants to build, break and cybersecure small control environments. CYBATI has performed years of research to develop this platform and is making it available for early access, school sponsorship and integrated education via the Kickstarter project announced during the session.
SCADA Security: The Five Stages of Cyber GriefLancope, Inc.
The document summarizes the five stages of grief experienced by organizations when they realize their critical infrastructure systems are connected to the internet and vulnerable to cyber attacks: denial, anger, bargaining, depression, and acceptance. It provides examples to illustrate why each stage occurs, such as discoveries of thousands of exposed SCADA and ICS devices online using tools like SHODAN, high-profile attacks like Stuxnet targeting critical infrastructure systems, and challenges of keeping outdated systems patched against emerging threats. The document argues organizations must ultimately accept the interconnected nature of systems and find new ways to design and manage critical infrastructure that are more secure and resilient to cyber attacks.
Подробный отчет из которого можно узнать:
- какие инструменты были использованы
- как были потрачены средства
- как проходила уличная агитация
- как и какая закупалась реклама
http://report.navalny.ru
South Korea has extensive internet filtering policies in place to restrict access to political content related to North Korea, gambling sites, pirated software, and pornography. The National Security Law is the primary regulation governing internet speech and aims to prevent communist ideology and pro-North Korean sentiment. Internet service providers are responsible for policing their networks and filtering a government list of over 120,000 banned sites. While testing found little blocking of sensitive content overall, minors' access is restricted by age verification requirements on adult sites.
The document summarizes key events in US history from the 1970s to present day, including the end of the Vietnam War through the Paris Peace Accords, Watergate scandal, Reagan presidency and Iran-Contra affair, shifts in the US economy, energy issues, relations with the Soviet Union/Russia and China, and Canada-US relations. It also briefly discusses separatism in Quebec and free trade agreements between the US, Canada, and Mexico.
This article examines the challenges faced by stepmothers and the coping strategies used by self-described "successful" stepmothers through a mixed methods study. The Delphi method was used to identify the top challenges for stepmothers according to experts, which included unclear role expectations and issues related to the biological mother. Ethnographic interviews with stepmothers found role challenges but also themes around positive coping strategies like communication, attitudes, marital quality, and social support. The study provides insight into how stepmothers can successfully navigate their complex role.
This document provides an overview of existing web archives and their use for research. It discusses several major web archives including the Internet Archive, Common Crawl, Pandora Archive, and national archives. For each, it describes their size and collection strategies, as well as positives and negatives for research use. The talk concludes with examples of how existing web archives in Australia are being used for research.
This document discusses issues related to the changing roles of librarians and library technicians in light of technological changes. It provides tips for "guerrilla librarianship" such as going where users are instead of expecting them to come to the library, rethinking space and costs by focusing on digital collections and services, and taking services out into the community in new ways. The document suggests librarians will need to adapt to remain relevant as the field undergoes significant changes.
Oracle endeca information discovery v3.0 integration with the obiee 11g bi se...Ravi Kumar Lanke
This document provides a step-by-step guide to integrating Oracle Endeca Information Discovery (OEID) version 3.0 with an Oracle BI Server repository. It describes using the Oracle Endeca Integrator to connect to an OBI Server, run a select query, and load the data into an Oracle Endeca Server data domain. It then outlines how to configure the data domain and load the data, and how to access and analyze the data through Oracle Endeca Studio. The process allows users to combine structured and unstructured data for analysis and dashboards without extensive changes to the BI repository.
Peter Wood has worked as an ethical hacker for the past 20 years, with clients in sectors as diverse as banking, insurance, retail and manufacturing. He will describe how advanced persistent threats operate from a security intelligence perspective, based on published case studies and analysis. He will highlight APT entry points and exploitation techniques and suggest practical prevention and detection strategies.
Virtualization and cloud computing provide business benefits like scalability, efficiency and elasticity but also introduce security challenges. Key security risks in virtualized environments include issues with the hypervisor, shared infrastructure vulnerabilities, and operational problems with access controls and application hardening. To balance security and business needs, a "protect to enable" strategy uses granular trust zones like high, medium and low trust environments that apply controls proportionate to asset risk and value. Lessons learned are that a holistic risk view is needed, virtualization security is still maturing, and applications introduced must be hardened.
Cloud, social networking and BYOD collide!Peter Wood
Working with a variety of multi-national organisations has shown Peter Wood that conventional security thinking has failed to address the challenge that the product of these areas has presented us - so how do we deal with this brave new world?
DSS ITSEC Webinars 2013 - Network Access Control + Mobile Security (Forescout)Andris Soroka
Network Access Control is used to control access to enterprise networks. Mobile Device Management is used to manage and secure mobile devices. Put them together and your customers can set network access policies based on knowledge of the device - the Power of Two!
Forescout is global leader in NAC. MobileIron is global leader in MDM/MCM/MAM and Secure Mobile IT.
Stopping the Adobe, Apple and Java Software Updater InsanityLumension
The document discusses the problems with disjointed software updating across different vendors. It notes that each vendor has its own updating system, creating challenges for centralized management and leaving endpoints vulnerable. It recommends adopting an in-house centralized system for multi-vendor patching to streamline updates and strengthen security.
Palo Alto Networks provides next-generation firewalls that can address all network security needs through application identification and control. Some key points:
- Founded in 2005 and now has over 1,000 employees and 11,000 enterprise customers.
- Traditional firewalls cannot adequately address today's applications that use encryption and advanced evasion techniques. Palo Alto's firewall identifies applications regardless of port or protocol to enforce fine-grained security policies.
- The firewall incorporates features like application control, user identification, content scanning, and wildfire malware analysis to safely enable applications and protect against both known and unknown threats.
Software Vulnerabilities contribute only to a portion of the security risks in your IT landscape. Your IT infrastructure is exposed to numerous vulnerabilities and security risks that are as threatening as CVEs or software vulnerabilities. Discovering and remediating all these vulnerabilities is essential to prevent your network from potential attacks.
SanerNow Advanced Vulnerability Management (AVM) redefines vulnerabilities and manages numerous security risks, including software vulnerabilities.
Topics discussed:
• The different types of vulnerabilities lurking in the network
• How attackers can exploit each of the vulnerabilities
• How SanerNow discovers and mitigates these types of vulnerabilities
HP Enterprise Security Products - Intelligent Security & Risk management Platform, una risposta globale e proattiva alle nuove sfide del mercato della sicurezza.
Pierpaolo Ali' , HP Enterprise Security Product - Sales Director Italy
Top Strategies to Capture Security Intelligence for ApplicationsDenim Group
Security professionals have years of experience logging and tracking network security events to identify unauthorized or malicious activity on a corporate network. Unfortunately, many of today's attacks are focused on the application layer, where the fidelity of logging for security events is less robust. Most application logs are typically used to see errors and failures and the internal state of the system, not events that might be interesting from a security perspective. Security practitioners are concerned with understanding patterns of user behavior and, in the event of an attack, being able to see an entire user’s session. How are application events different from network events? What type of information should security practitioners ensure software developers log for event analysis? What are the types of technologies that enable application-level logging and analysis? In this presentation, John Dickson will discuss what should be present in application logs to help understand threats and attacks, and better guard against them.
Dowley Security Systems is a leading provider of security solutions with over 40 years of experience. It offers a full range of design, installation, service and support solutions. The company is led by Chairman Mike Fields and CEO James Brown. It provides customized security systems for various industries including construction, commercial, energy, healthcare, education, and transportation.
Presentation I just finished creating for Denim Group, my clients new vulnerability management platform launch.. we\'ve gotten over 10 articles so far and several analyst quotes!
La sicurezza della rete non significa solo impedire o bloccare gli attacchi. Attraverso il virtual patching e l'analisi di contenuti e contesti, un ' Next Generation Intrusion Prevention System' puo' fornire una nuova dimensione di Security Intelligence per proteggere il business
Stefano Di Capua, HP Enterprise Secuirity Presales Manager Southern Europe
- Palo Alto Networks provides a next-generation firewall platform that can identify applications, users, and content to enable safe application usage while protecting against both known and unknown threats. This is achieved through technologies like App-ID, User-ID, Content-ID, WildFire, and SP3 architecture.
- The platform offers high performance, visibility, control, and threat prevention across applications, users, and content to replace traditional firewalls and security tools in a single device. This allows for a simplified security posture.
- Palo Alto Networks has seen strong revenue growth and increased its global customer base significantly in recent years, showing the success of its disruptive next-generation firewall approach.
MirrorCloud is business continuity software that continuously mirrors data from servers and desktops to a private cloud (onsite) and public cloud (offsite). It protects Windows servers and desktops with block-level mirroring and granular Exchange recovery. MirrorCloud provides quick file recovery and can virtualize failed systems. Pricing and sizing options are available from an account executive.
This presentation discusses Unisys Stealth, an innovative cybersecurity solution for industrial organizations. It describes how Stealth uses advanced techniques like encryption, virtual communities of interest, and cloaking endpoints to protect critical infrastructure from cyber attacks. The document outlines growing threats to industrial control systems, command and control software, and intellectual property. It argues that Stealth provides stronger, more cost-effective security than traditional approaches through features that reduce attack surfaces and facilitate regulatory compliance. Examples are given of organizations across industries using Stealth to address cybersecurity challenges.
This document describes z/Assure, an IBM z/OS vulnerability analysis solution created by security developers. It performs penetration tests on z/OS systems and applications to identify integrity-based software vulnerabilities. These vulnerabilities can allow attackers to bypass security controls and access sensitive data without authorization. While security systems like RACF aim to prevent this, vulnerabilities in IBM and third-party software leave systems at risk. z/Assure can help organizations identify these vulnerabilities and ensure NIST, PCI, and SOX compliance. Customers can choose to conduct an initial assessment or deploy z/Assure enterprise-wide for ongoing monitoring and remediation of vulnerabilities over time.
Palo Alto Networks produces next-generation firewalls that can identify applications inside encrypted traffic and allow fine-grained security policies based on applications rather than just ports. The document discusses Palo Alto Networks' products including their firewall appliances of various sizes, their management platform Panorama, their cloud-based malware analysis service WildFire, and their VPN client GlobalProtect. It presents the advantages of the company's approach over traditional firewalls that cannot inspect encrypted traffic or apply policies based on application identification.
22. ®
Common (Insecure) Topology
Industrial Network Corporate Network User’s Stations
Historian
PLCs
RTUs etc
● Critical assets are located in the industrial network
● The corporate network is considered as an insecure and is usually connected to the Internet
● Corporate User’s stations are located in the corporate network
● The user’s stations communicate directly with the Historian at the industrial network
! The Industrial Network and critical assets are accessible from the corporate network and thus at
risk.
Side # 22
23. ®
Common (Insecure) Topology
Industrial Network Corporate Network User’s Stations
Historian
PLCs
RTUs etc
● Critical assets are located in the industrial network
● The corporate network is considered as an insecure and is usually connected to the Internet
● Corporate User’s stations are located in the corporate network
● The user’s stations communicate directly with the Historian at the industrial network
! The Industrial Network and critical assets are accessible from the corporate network and thus at
risk.
Side # 23