Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
This patent describes a thermal barrier coating system and method for gas turbine engine components. The coating system includes an aluminum oxide layer formed on a nickel aluminide alloy substrate, without an intermediate bond coat. A ceramic layer is then deposited directly on the aluminum oxide layer. Using a nickel aluminide alloy substrate avoids issues with bond coat depletion and interdiffusion seen in conventional coatings, improving spallation resistance and thermal cycle life.
357 - 360, Badiu 2 RESEARCH ON DEGRADATION BY CORROSION OF SOME COMPONENTS OF...EDUARD C BADIU
This document discusses corrosion of components in building roofs. It summarizes that corrosion is caused by the interaction of materials with their environment in the presence of moisture, oxygen, and heat. Galvanic corrosion can occur when dissimilar metals are in contact in this environment. The document recommends selecting compatible materials or using protective coatings and insulators to prevent galvanic corrosion. It also discusses specific corrosion issues for steel roof decks, fasteners, and fasteners in contact with preservative-treated wood.
This document discusses metallurgy concepts related to welding, including:
1) It describes different types of steels like plain carbon steel, alloy steels, cast irons and how elements like carbon and manganese affect their properties.
2) It explains metallurgical phases in steel like ferrite, austenite and pearlite and how cooling rates affect their formation.
3) It discusses factors that influence weldability and properties of steels like composition, microstructure, heat treatment and service conditions.
This document discusses various types of cracking that can occur in welds, including centerline cracking, heat affected zone cracking, and transverse cracking. It describes the causes and conditions required for each type of cracking, such as solidification processes, residual stresses, and hydrogen embrittlement. Prevention methods are also covered, like preheating materials, controlling hydrogen levels, and using filler metals designed to prevent cracking. The document provides detailed information on characterizing weld microstructures and properties to evaluate cracking tendencies.
This document provides information on ceramics and glasses. It discusses the basic properties and types of ceramics, including traditional ceramics made of clay and silica, and engineering ceramics made of pure compounds. The key processing methods for ceramics, including pressing, slip casting, and extrusion, are described. The document also covers the thermal treatment of ceramics, their mechanical and deformation properties, and fatigue failure. For glasses, the document discusses their amorphous structure and viscous deformation properties. The various forming methods for glass are presented, as well as tempering of glass. The optical and thermal properties of glasses are also summarized.
Ceramics are inorganic, non-metallic materials processed at high temperatures. They are composed of clays, sand, and feldspar. The main types of ceramics are whitewares, refractories, glasses, abrasives, and cements. Ceramics have various applications including crockery, tiles, furnace bricks, glass containers, and armor protection. Advanced ceramics like silicon carbide are used in automotive and body armor components due to their heat resistance, wear resistance, and ballistic properties.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
This patent describes a thermal barrier coating system and method for gas turbine engine components. The coating system includes an aluminum oxide layer formed on a nickel aluminide alloy substrate, without an intermediate bond coat. A ceramic layer is then deposited directly on the aluminum oxide layer. Using a nickel aluminide alloy substrate avoids issues with bond coat depletion and interdiffusion seen in conventional coatings, improving spallation resistance and thermal cycle life.
357 - 360, Badiu 2 RESEARCH ON DEGRADATION BY CORROSION OF SOME COMPONENTS OF...EDUARD C BADIU
This document discusses corrosion of components in building roofs. It summarizes that corrosion is caused by the interaction of materials with their environment in the presence of moisture, oxygen, and heat. Galvanic corrosion can occur when dissimilar metals are in contact in this environment. The document recommends selecting compatible materials or using protective coatings and insulators to prevent galvanic corrosion. It also discusses specific corrosion issues for steel roof decks, fasteners, and fasteners in contact with preservative-treated wood.
This document discusses metallurgy concepts related to welding, including:
1) It describes different types of steels like plain carbon steel, alloy steels, cast irons and how elements like carbon and manganese affect their properties.
2) It explains metallurgical phases in steel like ferrite, austenite and pearlite and how cooling rates affect their formation.
3) It discusses factors that influence weldability and properties of steels like composition, microstructure, heat treatment and service conditions.
This document discusses various types of cracking that can occur in welds, including centerline cracking, heat affected zone cracking, and transverse cracking. It describes the causes and conditions required for each type of cracking, such as solidification processes, residual stresses, and hydrogen embrittlement. Prevention methods are also covered, like preheating materials, controlling hydrogen levels, and using filler metals designed to prevent cracking. The document provides detailed information on characterizing weld microstructures and properties to evaluate cracking tendencies.
This document provides information on ceramics and glasses. It discusses the basic properties and types of ceramics, including traditional ceramics made of clay and silica, and engineering ceramics made of pure compounds. The key processing methods for ceramics, including pressing, slip casting, and extrusion, are described. The document also covers the thermal treatment of ceramics, their mechanical and deformation properties, and fatigue failure. For glasses, the document discusses their amorphous structure and viscous deformation properties. The various forming methods for glass are presented, as well as tempering of glass. The optical and thermal properties of glasses are also summarized.
Ceramics are inorganic, non-metallic materials processed at high temperatures. They are composed of clays, sand, and feldspar. The main types of ceramics are whitewares, refractories, glasses, abrasives, and cements. Ceramics have various applications including crockery, tiles, furnace bricks, glass containers, and armor protection. Advanced ceramics like silicon carbide are used in automotive and body armor components due to their heat resistance, wear resistance, and ballistic properties.
The document summarizes corrosion of weldments. It discusses the microstructure of weldments and the distinct regions that form. It then covers the various forms of weld corrosion including galvanic, pitting, crevice, intergranular, stress corrosion, and hydrogen cracking. Factors that influence weld corrosion like material selection and welding parameters are presented. Testing methods for weld corrosion like linear polarization resistance and corrosion potential measurements are briefly described.
Metallurgical difficulties in welding of ferritic martensitic and duplex sta...Archunan Ponnukhan
This document discusses metallurgical difficulties in welding ferritic, martensitic, and duplex stainless steels. For ferritic steels, welding can cause loss of ductility through small amounts of martensite formation or rapid grain growth. Precautions like limiting heat input are recommended. Martensitic steels are more weldable but prone to cold cracking; preheating and post-weld heat treatment may be needed. Duplex steels can experience precipitation or secondary austenite formation with improper welding parameters. Selection of the correctly matched filler metal composition is also important to avoid undesirable microstructures in the weld metal.
This document provides an overview of welding metallurgy. It discusses the microstructure of welds and how the rapid changes in temperature during welding affect the physical characteristics and properties of metals. It examines the different zones that form in steel welds, including the fusion zone where grains are epitaxially formed, and the heat-affected zone. Problems that can occur during welding due to remelting and solidification are also summarized, such as macrosegregation, hot cracking, and cold cracking.
The document discusses nickel-based super alloys, including their properties, applications, common alloying elements, and weldability issues. Super alloys exhibit excellent mechanical strength and creep resistance at high temperatures due to their face-centered cubic crystal structure and alloying with nickel, cobalt, chromium, and other elements. Weldability problems with nickel alloys include hot cracking caused by sulfur and porosity caused by nitrogen, which require careful control of welding parameters.
This document discusses various metallic materials and processes used to manufacture and shape metals. It covers the following key topics in 3 sentences:
Ferrous metals like steel and cast iron contain a large percentage of iron, while nonferrous metals do not or only contain a small percentage of iron. Common metal processing techniques include casting molten metal into molds, hot and cold rolling of sheets and plates, and extruding and forging metals into various shapes. The mechanical properties of metals like stress, strain, hardness, toughness and fracture are also described in detail.
TALAT Lecture 3207: Solidification Defects in CastingsCORE-Materials
This lecture provides an introduction to the causes and remedies of the main solidification defects in castings. The students should be able to diagnose the major defects in castings and propose methods of preventing them. Basic knowledge of physics and foundry practice is assumed.
This document provides an overview of duplex stainless steel, including its metallurgy, corrosion resistance, welding practices, and design code requirements. It discusses the four main types of duplex stainless steel based on chromium content and their applications. Key points covered include the dual ferritic-austenitic microstructure of duplex stainless steel, how alloying elements like chromium, molybdenum, and nitrogen contribute to its properties, and metrics like PREN and CPT/CCT that evaluate its corrosion resistance. Welding guidelines and common processes for duplex stainless steel are also summarized.
Corrosion is the deterioration of metals due to chemical reactions with the environment. It can have serious consequences like structural failure, contamination, and equipment damage. Corrosion occurs via electrochemical reactions where the metal oxidizes (anode) and other reactions reduce (cathode). Factors like galvanic effects, stress, and aggressive ions can accelerate corrosion. Common methods to control corrosion include using coatings, alloying, removing oxygen, adding inhibitors, and electrochemical protection like cathodic protection. Proper prevention strategies can significantly extend the lifetime of metal structures and equipment.
This document discusses welding metallurgy and the structure of fusion welds. It describes the different zones that make up a typical fusion welded joint, including the fusion zone, weld interface, heat affected zone, and base material. It explains how the microstructure varies across these zones due to melting and solidification processes during welding. Factors like welding parameters, heat input, and joint geometry are described as influencing weld pool shape and grain structure. The concept of thermal severity number is introduced as a way to assess cracking susceptibility based on total plate thickness.
This document discusses phase transformations that occur during welding of different materials. It covers topics like weld CCT diagrams, carbon equivalent calculations for preheating requirements of steels, welding metallurgy of stainless steels, and Schaeffler and DeLong diagrams. The objectives are to understand weld metal microstructure development, factors affecting weldability, and predicting weld metal phase constitution. Keywords discussed include CCT diagrams, carbon equivalent values, Schaeffler and DeLong diagrams, and microstructures like grain boundary ferrite and Widmanstatten ferrite.
This document discusses Metglas amorphous brazing foils and their advantages over conventional brazing fillers. It provides details on various Metglas brazing foil compositions and their properties including chemical composition, melting temperatures, available geometries, and example applications. Specific foil compositions discussed include MBF15, MBF20, MBF30, MBF50, and MBF51 along with their corrosion resistance, brazing temperature ranges, and common uses.
This document discusses oxide dispersion strengthened austenitic stainless steel. It begins with an introduction to stainless steels and austenitic stainless steels. It then explains how oxide dispersion strengthening works and the process used to produce these steels. Comparisons are made between the properties of oxide dispersion strengthened steels and non-oxide dispersion strengthened steels. The document also discusses the microstructure, applications, advantages, disadvantages and concludes with references.
This document provides information on various metalworking processes including cold working, hot working, rolling, extrusion, casting, and heat treatments. It discusses:
1) Cold working processes like rolling, drawing, and pressing that permanently deform and strengthen metals below the recrystallization temperature.
2) Hot working processes like forging, rolling, and extrusion that deform metals above the recrystallization temperature for easier shaping.
3) The sand casting process which is used to produce small quantities of identical castings through the use of sand molds. Molten metal is poured into a mold cavity and allowed to solidify.
This document discusses the micro-structure of welding, including the fusion zone, partially melted zone, and heat affected zone. It describes the changes that occur in these zones due to the welding process, including re-melting and solidification in the fusion zone, localized melting at grain boundaries in the partially melted zone, and solid-state metallurgical reactions like recrystallization and grain growth in the heat affected zone. It also discusses how welding parameters like heat input, welding speed, and electrode diameter affect the micro-structure and properties of the different zones.
Dissimilar Metal Welding - Issues, Solution & TechniquesVarun K M
The document discusses various challenges and considerations for welding dissimilar metals. It notes that dissimilar metals often have different physical, chemical, and metallurgical properties, requiring compromise when welding. Key factors discussed include weld metal composition and properties, dilution rates, differences in melting temperatures, thermal expansion, and heat treatments between base metals. The document provides examples of dissimilar metal welds that failed, including a superheater tube weld that cracked due to carbon migration and increased hardness. It emphasizes the importance of selecting suitable welding processes, filler metals, joint designs, preheat/post-weld heat treatments to successfully join dissimilar metals.
This document discusses weldability and defects in weldments. It covers various topics related to weld design, residual stresses, weld defects, and the weldability of different materials such as steels, aluminum alloys, copper alloys, titanium alloys, and magnesium alloys. The objectives are for students to understand causes of residual stresses and distortions, differentiate between weld defects, and suggest remedies. Weldability depends on factors like material composition and welding techniques. Some materials like steel are more weldable than others such as aluminum.
This Presentation covers the basic concepts of Hot cracks and cold cracks in welding. For more information, please refer the books mentioned in the references slide.... Thank you
This document summarizes key aspects of three metal casting methods: sand casting, investment casting, and die casting. It covers the basic processes, materials used, tolerances, surface finishes, design considerations, solidification and heat transfer principles, variations and developments in the technologies, and potential environmental issues. The goal is to provide an overview of the fundamentals and tradeoffs of different casting approaches.
This document is a chapter-by-chapter summary of a document on cathodic protection of pipelines. It discusses the principles of corrosion, forms of corrosion including uniform, galvanic, crevice, pitting and stress corrosion cracking. It explains the mechanisms and prevention methods for different forms of corrosion. The document is intended to provide an overview of corrosion and cathodic protection for pipelines.
The desired to reach higher efficiencies, lower specific fuel consumption and reduced emission in modern engines has becomes the primary focus of engine researches and manufactures over the past three decades. Ceramic coating is a solution to such problem as they provide good thermal barrier properties for designers. In the design of adiabatic engines, reducing in cylinder heat rejection requires very special thermal barrier coatings on the engine combustion chamber. Partial Thermal barrier coatings (TBC) on the top surface of the piston is considered as a solution for reduction of unburned Hydrocarbon (HC) emission produce by incomplete combustion with respect to crevice volume when engines start. The TBC on the top piston surface decreases the thermal conductivity and increases the unburned charged oxidation, so that the metallic substrates will be exposed to lower peak temperature thereby reducing the thermal stress in engines components. Also thermal barrier coatings on other elements of combustion chamber of internal combustion engine offer advantages including fuel efficiency, multi fuel capacity and high power density. Therefore, thermal barrier coating (TBC) technology is successfully applied to the internal combustion engines, in particular to the combustion chamber.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
The document summarizes corrosion of weldments. It discusses the microstructure of weldments and the distinct regions that form. It then covers the various forms of weld corrosion including galvanic, pitting, crevice, intergranular, stress corrosion, and hydrogen cracking. Factors that influence weld corrosion like material selection and welding parameters are presented. Testing methods for weld corrosion like linear polarization resistance and corrosion potential measurements are briefly described.
Metallurgical difficulties in welding of ferritic martensitic and duplex sta...Archunan Ponnukhan
This document discusses metallurgical difficulties in welding ferritic, martensitic, and duplex stainless steels. For ferritic steels, welding can cause loss of ductility through small amounts of martensite formation or rapid grain growth. Precautions like limiting heat input are recommended. Martensitic steels are more weldable but prone to cold cracking; preheating and post-weld heat treatment may be needed. Duplex steels can experience precipitation or secondary austenite formation with improper welding parameters. Selection of the correctly matched filler metal composition is also important to avoid undesirable microstructures in the weld metal.
This document provides an overview of welding metallurgy. It discusses the microstructure of welds and how the rapid changes in temperature during welding affect the physical characteristics and properties of metals. It examines the different zones that form in steel welds, including the fusion zone where grains are epitaxially formed, and the heat-affected zone. Problems that can occur during welding due to remelting and solidification are also summarized, such as macrosegregation, hot cracking, and cold cracking.
The document discusses nickel-based super alloys, including their properties, applications, common alloying elements, and weldability issues. Super alloys exhibit excellent mechanical strength and creep resistance at high temperatures due to their face-centered cubic crystal structure and alloying with nickel, cobalt, chromium, and other elements. Weldability problems with nickel alloys include hot cracking caused by sulfur and porosity caused by nitrogen, which require careful control of welding parameters.
This document discusses various metallic materials and processes used to manufacture and shape metals. It covers the following key topics in 3 sentences:
Ferrous metals like steel and cast iron contain a large percentage of iron, while nonferrous metals do not or only contain a small percentage of iron. Common metal processing techniques include casting molten metal into molds, hot and cold rolling of sheets and plates, and extruding and forging metals into various shapes. The mechanical properties of metals like stress, strain, hardness, toughness and fracture are also described in detail.
TALAT Lecture 3207: Solidification Defects in CastingsCORE-Materials
This lecture provides an introduction to the causes and remedies of the main solidification defects in castings. The students should be able to diagnose the major defects in castings and propose methods of preventing them. Basic knowledge of physics and foundry practice is assumed.
This document provides an overview of duplex stainless steel, including its metallurgy, corrosion resistance, welding practices, and design code requirements. It discusses the four main types of duplex stainless steel based on chromium content and their applications. Key points covered include the dual ferritic-austenitic microstructure of duplex stainless steel, how alloying elements like chromium, molybdenum, and nitrogen contribute to its properties, and metrics like PREN and CPT/CCT that evaluate its corrosion resistance. Welding guidelines and common processes for duplex stainless steel are also summarized.
Corrosion is the deterioration of metals due to chemical reactions with the environment. It can have serious consequences like structural failure, contamination, and equipment damage. Corrosion occurs via electrochemical reactions where the metal oxidizes (anode) and other reactions reduce (cathode). Factors like galvanic effects, stress, and aggressive ions can accelerate corrosion. Common methods to control corrosion include using coatings, alloying, removing oxygen, adding inhibitors, and electrochemical protection like cathodic protection. Proper prevention strategies can significantly extend the lifetime of metal structures and equipment.
This document discusses welding metallurgy and the structure of fusion welds. It describes the different zones that make up a typical fusion welded joint, including the fusion zone, weld interface, heat affected zone, and base material. It explains how the microstructure varies across these zones due to melting and solidification processes during welding. Factors like welding parameters, heat input, and joint geometry are described as influencing weld pool shape and grain structure. The concept of thermal severity number is introduced as a way to assess cracking susceptibility based on total plate thickness.
This document discusses phase transformations that occur during welding of different materials. It covers topics like weld CCT diagrams, carbon equivalent calculations for preheating requirements of steels, welding metallurgy of stainless steels, and Schaeffler and DeLong diagrams. The objectives are to understand weld metal microstructure development, factors affecting weldability, and predicting weld metal phase constitution. Keywords discussed include CCT diagrams, carbon equivalent values, Schaeffler and DeLong diagrams, and microstructures like grain boundary ferrite and Widmanstatten ferrite.
This document discusses Metglas amorphous brazing foils and their advantages over conventional brazing fillers. It provides details on various Metglas brazing foil compositions and their properties including chemical composition, melting temperatures, available geometries, and example applications. Specific foil compositions discussed include MBF15, MBF20, MBF30, MBF50, and MBF51 along with their corrosion resistance, brazing temperature ranges, and common uses.
This document discusses oxide dispersion strengthened austenitic stainless steel. It begins with an introduction to stainless steels and austenitic stainless steels. It then explains how oxide dispersion strengthening works and the process used to produce these steels. Comparisons are made between the properties of oxide dispersion strengthened steels and non-oxide dispersion strengthened steels. The document also discusses the microstructure, applications, advantages, disadvantages and concludes with references.
This document provides information on various metalworking processes including cold working, hot working, rolling, extrusion, casting, and heat treatments. It discusses:
1) Cold working processes like rolling, drawing, and pressing that permanently deform and strengthen metals below the recrystallization temperature.
2) Hot working processes like forging, rolling, and extrusion that deform metals above the recrystallization temperature for easier shaping.
3) The sand casting process which is used to produce small quantities of identical castings through the use of sand molds. Molten metal is poured into a mold cavity and allowed to solidify.
This document discusses the micro-structure of welding, including the fusion zone, partially melted zone, and heat affected zone. It describes the changes that occur in these zones due to the welding process, including re-melting and solidification in the fusion zone, localized melting at grain boundaries in the partially melted zone, and solid-state metallurgical reactions like recrystallization and grain growth in the heat affected zone. It also discusses how welding parameters like heat input, welding speed, and electrode diameter affect the micro-structure and properties of the different zones.
Dissimilar Metal Welding - Issues, Solution & TechniquesVarun K M
The document discusses various challenges and considerations for welding dissimilar metals. It notes that dissimilar metals often have different physical, chemical, and metallurgical properties, requiring compromise when welding. Key factors discussed include weld metal composition and properties, dilution rates, differences in melting temperatures, thermal expansion, and heat treatments between base metals. The document provides examples of dissimilar metal welds that failed, including a superheater tube weld that cracked due to carbon migration and increased hardness. It emphasizes the importance of selecting suitable welding processes, filler metals, joint designs, preheat/post-weld heat treatments to successfully join dissimilar metals.
This document discusses weldability and defects in weldments. It covers various topics related to weld design, residual stresses, weld defects, and the weldability of different materials such as steels, aluminum alloys, copper alloys, titanium alloys, and magnesium alloys. The objectives are for students to understand causes of residual stresses and distortions, differentiate between weld defects, and suggest remedies. Weldability depends on factors like material composition and welding techniques. Some materials like steel are more weldable than others such as aluminum.
This Presentation covers the basic concepts of Hot cracks and cold cracks in welding. For more information, please refer the books mentioned in the references slide.... Thank you
This document summarizes key aspects of three metal casting methods: sand casting, investment casting, and die casting. It covers the basic processes, materials used, tolerances, surface finishes, design considerations, solidification and heat transfer principles, variations and developments in the technologies, and potential environmental issues. The goal is to provide an overview of the fundamentals and tradeoffs of different casting approaches.
This document is a chapter-by-chapter summary of a document on cathodic protection of pipelines. It discusses the principles of corrosion, forms of corrosion including uniform, galvanic, crevice, pitting and stress corrosion cracking. It explains the mechanisms and prevention methods for different forms of corrosion. The document is intended to provide an overview of corrosion and cathodic protection for pipelines.
The desired to reach higher efficiencies, lower specific fuel consumption and reduced emission in modern engines has becomes the primary focus of engine researches and manufactures over the past three decades. Ceramic coating is a solution to such problem as they provide good thermal barrier properties for designers. In the design of adiabatic engines, reducing in cylinder heat rejection requires very special thermal barrier coatings on the engine combustion chamber. Partial Thermal barrier coatings (TBC) on the top surface of the piston is considered as a solution for reduction of unburned Hydrocarbon (HC) emission produce by incomplete combustion with respect to crevice volume when engines start. The TBC on the top piston surface decreases the thermal conductivity and increases the unburned charged oxidation, so that the metallic substrates will be exposed to lower peak temperature thereby reducing the thermal stress in engines components. Also thermal barrier coatings on other elements of combustion chamber of internal combustion engine offer advantages including fuel efficiency, multi fuel capacity and high power density. Therefore, thermal barrier coating (TBC) technology is successfully applied to the internal combustion engines, in particular to the combustion chamber.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Effect of dilution on microstructure and hardness of a nickel-base hardfacing...RAMASUBBU VELAYUTHAM
1) The document examines the effect of dilution on the microstructure and hardness of a nickel-base hardfacing alloy deposited on an austenitic stainless steel substrate.
2) Electron probe microanalysis revealed considerable dilution of the hardfacing alloy by the substrate material within the first 2.5mm of the deposit, altering the chemistry, microstructure, and decreasing the hardness in this region.
3) Beyond 2.5mm from the interface, the hardness increases to levels comparable to the undiluted alloy as subsequent deposit layers approach, due to decreasing dilution effects farther from the substrate.
Tribological study of Ceramic Matrix Composite(CMCs).pptxShibaSankarDash
Ceramic matrix composites (CMCs) have improved fracture toughness over conventional structural ceramics through the addition of fibers that increase crack resistance. This document discusses the tribological properties and wear mechanisms of various CMCs, including those reinforced with silicon carbide (SiC) fibers in a silicon nitride (Si3N4) matrix or carbon fibers in a silicon carbide (SiC) matrix. The lowest wear rates were found for zirconium diboride (ZrB2) composites containing 8-32% aluminum oxide (Al2O3). Proper material selection and microstructure optimization can improve CMC reliability and performance in tribological applications.
Effect of welding process on dilution of nickel base hardfacing alloys C.R. D...RAMASUBBU VELAYUTHAM
1. The study examined the effect of welding process on dilution of nickel-base hardfacing alloys deposited on 316L(N) stainless steel substrates.
2. Gas tungsten arc welding (GTAW) resulted in a dilution zone width of ~2.0 mm, while plasma transferred arc welding (PTAW) reduced this to <0.5 mm. GTAW deposits showed variation in microstructure and hardness with dilution, while PTAW deposits were more uniform.
3. Stress relieving heat treatment had little effect on hardness or microstructure of the deposits. The welding process significantly affected dilution and properties near the substrate interface.
Thermal barrier coatings (TBCs) are advanced materials applied to gas turbine and aero-engine parts to insulate components from high operating temperatures. TBCs utilize thermally insulating ceramic materials to create a temperature difference between the underlying alloy and coating surface, allowing components to withstand higher temperatures while reducing thermal fatigue and extending part life. Yttria-stabilized zirconia is commonly used as the TBC material due to its low thermal conductivity, high spallation resistance, and erosion resistance. Researchers are exploring alternative TBC materials like zirconates and garnets to improve properties like sintering resistance and thermal cycling performance.
Fundamentals, synthesis and applications of Al2O3-ZrO2 compositesTANDRA MOHANTA
When the word “Ceramic” comes to our mind, we usually associate them with plates, saucers, cups and mugs. But, the word “Ceramic” encompasses more than just the word “plates” or “saucers”. Indeed, ceramic materials are hard and inherently brittle, but this is just the tip of the iceberg. They have multifarious properties and have acquired a status of high technical importance in the field of scientific research. Ceramics are the soul of the modern day’s structural applications owing to their high mechanical and thermal stability under different challenging conditions. They exhibit remarkable properties such as high hardness, high wear resistance, high corrosion resistance, high elastic modulus, high melting point and the ability to retain high strength at elevated temperatures. Alumina (Al2O3) is one such remarkable ceramic material known for its unique optical, mechanical and electrical properties. But the brittle nature of Al2O3 limits its use in certain engineering applications. Therefore, the strength of Al2O3 and Al2O3- based ceramics can be enhanced by tailoring the microstructural design through the application of strategic techniques that may involve secondary phase particle inclusion (such as Zirconia, ZrO2)
Overview on Thermal Barrier Coatings Application and DevelopmentIJRES Journal
This paper mainly summary the application and development of thermal barrier coatings (TBC) in last decades. TBCs have been widely used in automotive, gas turbine, solid oxide fuel cell and other fields. It can protect substrate materials from high temperature oxidation and corrosion meanwhile increasing lifetime of parts and improving the work efficiency. At last, the development trend of TBC was referred on the TBCs materials and structures.
This document discusses silicon carbide ceramics, including their unique properties, microstructure, densification challenges, and common uses. It describes how sintering aids can be used to achieve high density at lower temperatures and pressures. Liquid phase sintered silicon carbide is favored for tribological and structural applications due to properties like high hardness, strength and oxidation resistance. The document also summarizes silicon carbide's applications in abrasives, automotive brake discs, electronics, armor, and as structural materials in high temperature environments.
This document summarizes a seminar report on thermal barrier coatings. It discusses that thermal barrier coatings consist of a metallic bond coat, thermally grown oxide layer, and ceramic top coat, most commonly yttria-stabilized zirconia. It reviews common deposition methods for thermal barrier coatings like air plasma spray, electron beam physical vapor deposition, and electrostatic spray assisted vapor deposition. The document concludes that thermal barrier coatings improve engine performance by allowing higher operating temperatures and reduce maintenance costs, making them an important technology with applications in industries like aerospace and automotive.
The document discusses silicon carbide (SiC) ceramics, including their unique properties, microstructure, densification challenges, and common uses. It describes how sintering aids can be used to achieve high density at lower temperatures and pressures. Liquid phase sintered SiC ceramics are favored for tribological and structural applications due to properties like high hardness, strength, and thermal conductivity. The document summarizes typical applications of SiC ceramics in abrasives, automotive components, electronics, armor, and more.
Experimental evaluations and performance of the aluminum silicon carbide par...IAEME Publication
This document summarizes an experimental study on aluminum-silicon carbide particle metal matrix composites. Ring-shaped composites were fabricated using solid-state processing with varying sintering temperatures and times. The composites were subjected to thermal shock at +800C and -800C, and their radial crushing strength was tested. Micrographs of the fractured surfaces were analyzed. Thermal shock from sub-ambient temperatures was found to be more damaging than from elevated temperatures. Failure from elevated temperatures was dominated by cavity formation at interfaces, while sub-ambient temperatures caused more interfacial and matrix damage. The study evaluated the effect of reinforcement particles on the mechanical properties of the composites.
Experimental evaluations and performance of the aluminum silicon carbide par...IAEME Publication
Stresses induced due to thermal mismatch between the metal matrix and the ceramic reinforcement in metal matrix composite may impart plastic deformation to the matrix there by
resulting in a reduction of the residual stresses. Thermal mismatch strains also may quite often crack
the matrix resulting in a relaxation of the residual stresses. The interface in MMCs is a porous, noncrystalline portion in comparison with the matrix or the reinforcement (metal matrix and ceramic reinforcement in this case).
The two first-stage turbine blades failed due to high-temperature corrosion. Analysis found corrosion products containing sulfur, chlorides and oxides on the blades, indicating Type 2 high-temperature corrosion likely occurred. Type 2 corrosion involves molten chloride salt induced corrosion in the presence of SO3 between 650-880°C, resulting in localized pitting corrosion. The single crystal superalloy blades, made of CMSX-4, are susceptible to high-temperature corrosion when operating above 1800°F due to the presence of air contaminants and reactive alloying elements.
A Review Study of Investigation on Titanium Alloy Coatings for Wear Resistanc...IRJET Journal
This document summarizes a review study investigating titanium alloy coatings deposited via physical vapor deposition (PVD) for improved wear resistance. PVD was identified as a cost-effective coating method that provides benefits like superior wear and corrosion resistance as well as low friction. The coatings were deposited on mild steel substrates for pump shaft applications. Characterization techniques like X-ray diffraction and ball-on-disc testing were used to analyze the coatings. The literature review discussed various coating materials, deposition methods, and experimental factors related to evaluating PVD coatings for wear resistance.
Thermal Barrier Coating For Gas Turbine EnginesNelsonkandulna
This presentation describes the thermal barrier coating process, its anatomy, types, material selection, failure, and characterization. Thermal barrier coatings (TBCs) were introduced to protect the external surface of gas turbine engine components from thermal resistance and thereby decrease the temperature of the metal surfaces. Yttria stabilized zirconia (YSZ) is one of the most popular and widely used TBC materials as it provides the best performance in high-temperature zones such as diesel engines and gas turbines. The columnar microstructure of YSZ coating provides excellent strain tolerance and adhesion to the coating. Gas turbines are used to power aircraft, trains, ships, electrical generators, pumps, gas compressors, and tanks.
Preparation and Investigation on Properties of Cryogenically Solidified Nano ...IJERA Editor
In the present work, AL-alloy containing 12% silicon (LM 13) matrix nano composites were fabricated in sand moulds by using copper end blocks of copper end chill thickness 10 &15 nm with cryogenic effect . The size of the reinforcement (NanoZro2) ranges from 50-80nm being added ranges from 3 to 15 wt % in steps of 3 wt % . Cryogenically solidified Nano Metal Matrix Composites were compressed by using hydraulic compression machine. Specimens were prepared according to ASTM standards and tested for their strength, hardness and fracture toughness. Micro structural studies of the fabricated Nano Composites indicate that there is uniform distributions of reinforcements in the matrix materials (LM 13). An increasing trend of hardness, UTS & fracture toughness has been observed. The best results have been obtained at 12 wt %. The results were further justified by comparing two copper end chill thickness 10 &15 mm. Finally the Volumetric Heat Capacity of the cryo-chill is identified as an important parameter which affects mechanical properties.
This document discusses thermal barrier coatings (TBCs) used to protect metallic parts from high temperatures. It provides information on the structure and processing of TBCs as well as their failure mechanisms. TBCs have a multi-layer structure consisting of a metallic bond coat and ceramic top coat to provide thermal insulation. Failure typically occurs through spallation of the top coat due to stresses from the growth of an oxide layer at the interface. The document reviews approaches to improve TBC performance and durability through heat treatments of the bond coat and developing gradient coatings.
3.an update on nano coatings to mitigate corrosion (1)EditorJST
In real time situation machine members are subjected to variable and impact loading experience displacement patterns that may through loading of beam members beyond the yield stress. This causes permanent deformations and excessive fatigue making the beam weak and unserviceable
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
Inventors and entrepreneurs have vocations fueled by passion. Many would have done it for free or as a hobby if it hadn’t become a profession. Mark Rosenzweig is a natural creator, driven by his passion. This fuel has led Mark to develop his ideas into viable products and innovations that he has been patenting since 2003. From an innovative filter sensor and indicator for vacuum cleaners to a basket for deep fryer and methods of cooking food products to a compact cyclonic bagless vacuum cleaner. Sometimes independently and often as part of creative teams, Mark has patented just under one hundred innovative inventions between 2003 and 2017.
The Most Inspiring Entrepreneurs to Follow in 2024.pdfthesiliconleaders
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
Unlocking WhatsApp Marketing with HubSpot: Integrating Messaging into Your Ma...Niswey
50 million companies worldwide leverage WhatsApp as a key marketing channel. You may have considered adding it to your marketing mix, or probably already driving impressive conversions with WhatsApp.
But wait. What happens when you fully integrate your WhatsApp campaigns with HubSpot?
That's exactly what we explored in this session.
We take a look at everything that you need to know in order to deploy effective WhatsApp marketing strategies, and integrate it with your buyer journey in HubSpot. From technical requirements to innovative campaign strategies, to advanced campaign reporting - we discuss all that and more, to leverage WhatsApp for maximum impact. Check out more details about the event here https://events.hubspot.com/events/details/hubspot-new-delhi-presents-unlocking-whatsapp-marketing-with-hubspot-integrating-messaging-into-your-marketing-strategy/
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...APCO
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
Starting a business is like embarking on an unpredictable adventure. It’s a journey filled with highs and lows, victories and defeats. But what if I told you that those setbacks and failures could be the very stepping stones that lead you to fortune? Let’s explore how resilience, adaptability, and strategic thinking can transform adversity into opportunity.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
Best Competitive Marble Pricing in Dubai - ☎ 9928909666Stone Art Hub
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
1. United States Patent (19)
Bruce et al.
54 THERMAL BARRIER COATING RESISTANT
TO EROSIONAND IMPACT BY
PARTICULATE MATTER
75 Inventors: Robert W. Bruce, Loveland; Jon C.
Schaeffer, Milford, both of Ohio; Mark
A. Rosenzweig, Waldorf, Md.; Rudolfo
Viguie; David W. Rigney, both of
Cincinnati, Ohio; Antonio F.
Maricocchi, Loveland, Ohio; David J.
Wortman, Hamilton, Ohio; Bangalore
A. Nagaraj, West Chester, Ohio
73) Assignee: General Electric Company, Cincinnati,
Ohio
21 Appl. No.: 581,819
22 Filed: Jan. 2, 1996
[51] Int. Cl. ... B32B 15/04
52) U.S. Cl. .......................... 428/698; 428/697; 428/701;
428/702; 428/472; 427/248.1; 427/249;
501/103; 501/152
58) Field ofSearch ............................... 428/698, 697,
428/701, 702, 472; 501/152, 103; 427/249,
248.1
(56 References Cited
U.S. PATENT DOCUMENTS
4,055,705 10/1977 Stecura etal. .......................... 428/633
4,249,913 2/1981 Johnson etal. ........................... 51/295
4,321,310 3/1982 Ulion et al. .. ... 428/62
4,321,311 3/1982 Strangman .. ... 428,623
4,335,190 6/1982 Bill et al. . ... 428/623
4,402992 9/1983 Liebert ...................................... 427/34
4,414,239 11/1983 Ulion et al. .......................... 427,248.1
US005683825A
11 Patent Number: 5,683,825
45 Date of Patent: Nov. 4, 1997
4,495,907 1/1985 Kamo ................. 501/52
4,503,130 3/1985 Bosshart et al. ........................ 428/623
4,525,464 6/1985 Claussen et al. ....................... 501/03
4,588,607 5/1986 Matarese et al. .. ... 427/34
4,676,994 6/1987 Demaray ............ ... 427/42
4,714,624 12/1987 Naik ............
4,738,227 4/1988 Kamo et al. ............................. 123/23
4,761,346 8/1988 Naik ............... ... 428/627
4,774,150 9/1988 Amano et al. .......................... 428/690
4,808,487 2/1989 Gruenr .................................... 428/610
4,822,689 4/1989 Fukubayashi et al. ................. 428,472
FOREIGN PATENT DOCUMENTS
2252 567 9/1994 United Kingdom.
Primary Examiner-Archene Turner
Attorney, Agent, or Firm-Andrew C. Hess; David L.
Narciso
57 ABSTRACT
Athermal barriercoatingadaptedto beformed on anarticle
subjected to a hostile thermal environment while subjected
toerosionbyparticlesanddebris,asisthecasewithturbine,
combustor and augmentor components of a gas turbine
engine.Thethermalbarriercoatingis composed ofa metal
lic bond layer deposited on the surface of the article, a
ceramic layer overlaying the bond layer, and an erosion
resistant composition dispersed within or overlaying the
ceramic layer. The bond layer serves to tenaciously adhere
thethermal insulatingceramic layertothe article,while the
erosion-resistant composition renders the ceramic layer
more resistantto erosion.The erosion-resistant composition
is either alumina (Al2O) or silicon carbide (SiC), while a
preferred ceramic layer is yttria-stabilized zirconia (YSZ)
deposited by a physical vapor deposition techniqueto have
a columnar grain structure.
20 Claims, 2 Drawing Sheets
S N N N N Y
1.
NYNYN NY
S.L7 L l
S^s S N S N S N en 4
- N N N N N Y
NYS NYNNNN
2. U.S. Patent Nov. 4, 1997 Sheet 1 of2 5,683,825
N. N.
Y 7 V 7
2 Y s 2(4S4N4O4 kill Nill r1 K4 kills in a
3
4. 5,683,825
1.
THERMAL BARRER COATING RESISTANT
TO EROSION AND IMPACT BY
PARTICULATE MATTER
This invention relates to thermal barrier coatings for
components exposed to high temperatures, such as the
hostile thermal environment of a gas turbine engine. More
particularly, this invention is directed to a thermal barrier
coating thatincludes athermal-insulatingcolumnarceramic
layer, the thermal barrier coating being characterized by
enhanced resistance to erosion as a result of an erosion
resistant composition thatforms a physical barrier over the
columnar ceramic layer, or that is dispersed in or forms a
part of the columnar ceramic layer, so as to render the
ceramic layer more resistant to erosion.
BACKGROUND OF THE INVENTION
Higher operatingtemperatures ofgas turbine engines are
continuously sought in order to increase their efficiency.
However, as operatingtemperatures increase,thehigh tem
perature durability of the components of the engine must
correspondingly increase. Significantadvances in high tem
perature capabilities have been achieved through formula
tion of nickel and cobalt-base superalloys, though such
alloys alone are often inadequate to form components
located in certain sections of a gas turbine engine, such as
the turbine, combustor and augmentor. A common solution
is to thermally insulate such components in order to mini
mize their service temperatures. For this purpose, thermal
barrier coatings (TBC) formed on the exposed surfaces of
high temperature components have found wide use.
Thermal barrier coatings generally entail a metallic bond
layer deposited on the component surface, followed by an
adherent ceramic layer thatserves to thermally insulate the
component. Metallicbondlayers areformedfromoxidation
resistant alloys such as MCrAIY where M is iron, cobalt
and/or nickel, and from oxidation-resistant intermetallics
such as diffusion aluminides and platinum aluminides, in
order to promote the adhesion of the ceramic layer to the
component and prevent oxidation of the underlying super
alloy. Various ceramic materials have been employed as the
ceramic layer, particularly zirconia (ZrO2) stabilized by
yttria (YO), magnesia (MgO) or another oxide. These
particular materials are widely employed in the artbecause
they can be readily depositedby plasma spray, flame spray
and vapordeposition techniques,and are reflectivetoinfra
red radiation so as to minimize the absorption of radiated
heat by the coated component, as taught by U.S. Pat. No.
4,055,705 to Stecura et al.
Asignificantchallengeofthermalbarriercoatingsystems
hasbeentheformation ofa moreadherentceramiclayerthat
is less susceptible to spalling when subjected to thermal
cycling. Forthispurpose,thepriorarthasproposed various
coating systems, with considerable emphasis on ceramic
layers having enhanced strain tolerance as a result of the
presence of porosity, microcracks and segmentation of the
ceramic layer. Microcracks generally denote random inter
nal discontinuities within the ceramic layer, while segmen
tation indicates the presence of microcracks or crystalline
boundaries that extend perpendicularly through the thick
ness of the ceramic layer, thereby imparting a columnar
grain structure to the ceramic layer. As taughtby U.S. Pat.
No. 4321,311 toStrangman,a zirconia-base coating having
acolumnargrain structure isabletoexpandwithoutcausing
damagingstressesthatleadtospallation,asevidencedbythe
results ofcontrolledthermal cyclic testing.Asfurthertaught
5
10
15
20
25
35
45
50
55
65
2
by Strangman, a strong adherent continuous oxide surface
layer is preferably formed over a MCrATY bond layer to
protect the bond layer against oxidation and hot corrosion,
and to provide a firm foundation for the columnar grain
Zirconia coating.
Whilezirconia-basethermalbarriercoatings,andparticu
larlyyttria-stabilizedzirconia(YSZ)coatingshavingcolum
nargrain structures,are widely employedinthe artfortheir
desirablethermalandadhesioncharacteristics,suchcoatings
aresusceptibleto erosionandimpactdamagefromparticles
and debris present in the high velocity gas stream of a gas
turbine engine. Furthermore, adjoining hardware within a
gas turbine engine may sufficiently rub the thermal barrier
coating to expose the underlying metal substrate to oxida
tion. Consequently, there is a needfor impact and erosion
resistantthermal barriercoating systems. Forrelatively low
temperature applications such as gas turbine engine com
pressor blades, U.S. Pat. No. 4,761,346 to Naik teaches an
erosion-resistant coating composed of an interlayer of a
ductilemetalfromtheGroupVItoGroupVIIIelements,and
a hard outer layer ofa boride, carbide, nitride or oxide of a
metal selected from the Group III to Group VI elements.
According to Naik, the ductile metal serves as a crack
arrestor and prevents diffusion of embrittling components
into the underlying substrate from the hard outer layer.
However,becausetheductilemetallayerisapoorinsulating
material, the erosion-resistantcoating taught by Naik is not
a thermal barrier coating, andtherefore is unsuitablefor use
in higher temperature applications such as high and low
pressure turbine nozzles and blades, shrouds, combustor
liners and augmentor hardware of gas turbine engines.
Thermal barrier coating systems suggested for use in
highertemperatureapplicationsofa gasturbine enginehave
often included columnarYSZceramic coatingsdepositedby
physical vapor deposition (PWD) techniques. For example,
U.S. Pat. No. 4916.022 to Solfest et al. teach a PVD
deposited columnar YSZ ceramic coating that includes a
titania-doped interfacial layer between the YSZ ceramic
coating and an underlying metallic bond layer in order to
reduce oxidation of the bond layer, thereby improving the
resistance ofthe ceramic coating to spallation. Solfest et al.
suggest densifying the outer surface ofthe ceramic coating
by laser glazing, electrical biasing and/or titania (TiO)
doping in order to promote the erosion resistance of the
ceramiccoating. Howeverinpractice,additions oftitaniato
a columnar YSZ ceramic coating have been shown to have
theoppositeeffect-namely,adecreaseinerosionresistance
of the YSZ ceramic coating.
In contrast,thepriorartpertainingtointernalcombustion
engines has suggested a plasma sprayed (PS) zirconia
ceramic coating protected by an additional wear-resistant
outer coating composed of zircon (ZrSiO) or a mixture of
silica (SiO2), chromia (CrO) and alumina (Al2O) densi
fied by achromic acid treatment,astaughtby U.S. Pat. No.
4,738,227 to Kamo et al. Kamo et al. teach that their
wear-resistant outer coating requires a number of impreg
nation cycles to achieve a suitable thickness ofabout 0.127
millimeter.WhiletheteachingsofKamoetal. may beuseful
for promoting a more wear-resistant component, the result
ing densification of the ceramic coating increases the ther
mal conductivity of the coating, and would nullify the
benefit of using a columnar grain structure. Consequently,
the teachings of Kamo etal. are incompatible with thermal
barrier coatings for use in high temperature applications of
a gas turbine engine.
As is apparent from the above, though improvements in
resistance to spallation have been suggested for thermal
5. 5,683,825
3
barrier coatings for gas turbine engine components, such
improvements tend to degrade the insulative properties
and/or the erosion and wear resistance of such coatings. In
addition, thoughimprovementsinwearresistancehavebeen
achieved for ceramic coatings intended for applications
other than thermal barrier coatings, such improvements
would significantly compromise the thermal properties
required of thermal barrier coatings. Accordingly, what is
needed is a thermal barrier coating system characterized by
the ability to resist wear and spallation when subjected to
impact and erosion in a hostile thermal environment.
Preferably, such a coating system would be readily
formable, andemployan insulating ceramic layer deposited
in a manner that promotes both the impact and erosion
resistance and the thermal insulating properties ofthe coat
1ng.
SUMMARY OF THE INVENTION
Itisanobjectofthisinventiontoprovideathermalbarrier
coating for an article exposed to a hostile thermal environ
mentwhile simultaneously subjected to impact and erosion
by particles and debris.
It is another object of this invention that such a thermal
barrier coating includes an insulating ceramic layer charac
terizedbymicrocracksorcrystallineboundaries thatprovide
strain relaxation within the coating.
It is afurther object ofthis invention that such athermal
barrier coating includes an impact and erosion-resistant
composition dispersed within or overlaying the ceramic
layer, so as to render the ceramic layer more resistant to
erosion.
Itisyetanotherobjectofthisinventionthattheprocessing
steps by which the coating is formed are tailored to also
promote the impact and erosion resistance of the coating.
Thepresentinvention generallyprovidesathermalbarrier
coatingwhichisadaptedto beformedonanarticlesubjected
to a hostile thermal environmentwhile subjected to erosion
by particles and debris, as is the case with turbine, combus
torandaugmentor components ofagas turbine engine.The
thermal barrier coatingis composed ofametallicbondlayer
formed on the surface of the article, a ceramic layer over
layingthe bond layer, and an erosion-resistant composition
dispersed within or overlaying the ceramic layer. The bond
layer serves to tenaciously adhere the thermal insulating
ceramic layer to the article, while the erosion-resistant
composition renders the ceramic layer more resistant to
impacts and erosion. The erosion-resistant composition is
either alumina (AO) or silicon carbide (SiC), while a
preferred ceramic layer is yttria-stabilized zirconia (YSZ)
deposited by a physical vapor deposition technique to pro
duce a columnar grain structure.
According to this invention, thermal barrier coatings
modified to include one of the erosion-resistant composi
tions of this invention have been unexpectedly found to
result in erosion rates of up to about 50 percent less than
columnar YSZ ceramic coatings of the prior art, including
the titania-doped YSZ ceramic coating taught by U.S. Pat.
No. 4,916,022 to Solfest et al. Such an improvement is
particularly unexpected if silicon carbide is used as the
erosion-resistant composition, in that silicon carbide would
be expected to react with the YSZ ceramic layer to form
zircon, thereby promoting spallation of the ceramic layer.
Further unexpected improvements in erosion resistance are
achieved byincreasingthesmoothness ofthebondlayerand
maintaining the article stationary during deposition of the
ceramic layer.
O
15
20
25
30
35
4
Other objects and advantages of this invention will be
better appreciated from the following detailed description.
BRIEF DESCRIPTION OF THE DRAWINGS
The above and other advantages of this invention will
become moreapparentfromthe following description taken
in conjunction with the accompanying drawings, in which:
FIG. 1 showsaperspectiveviewofaturbinebladehaving
a thermal barrier coating;
FIGS. 2 and 3 are an enlarged sectional views of the
turbineblade ofFIG. 1taken alongline2-2,and represent
thermal barriercoatings in accordance with first and second
embodiments, respectively, ofthis invention.
DETAILED DESCRIPTION OF THE
INVENTION
The present invention is generally directed to metal
components that operate within environments characterized
by relatively high temperatures, in which the components
are subjected to a combination of thermal stresses and
impact and erosion by particles and debris. Notable
examples of such components include the high and low
pressure turbine nozzles and blades, shrouds, combustor
linersandaugmentorhardwareofgasturbineengines.While
the advantages of this invention will be illustrated and
described with reference to a component of a gas turbine
engine, the teachings ofthis invention are generally appli
cable to any component in which a thermal barrier can be
used to insulate the component from a hostile thermal
environment.
To illustrate the invention, a turbine blade 10 of a gas
turbine engine is shown in FIG. 1. As is generally
conventional, the blade 10 may be formed ofa nickel-base
or cobalt-base superalloy. The blade 10 includes an airfoil
section 12 against which hot combustion gases are directed
during operation of the gas turbine engine, and whose
45
50
55
65
surface is therefore subjectedto severe attackby oxidation,
corrosion and erosion. The airfoil section 12 is anchored to
aturbinedisk(notshown)througharootsection 14. Cooling
passages 16 are present through the airfoil section 12
through which bleed air is forced to transfer heat from the
blade 10.
According to this invention, the airfoil section 12 is
protectedfromthehostile environmentofthe turbine section
by an erosion-resistantthermal barrier coatingsystem 20, as
representedin FIGS. 2 and3. With reference to FIGS. 2and
3, the superalloy forms a substrate 22 on which the coating
system 20 is deposited.The coatingsystem 20 is composed
ofa bond layer26 overwhich aceramic layer30 isformed.
The bond layer 26 is preferably formed of a metallic
oxidation-resistant material, such that the bond layer 26
protects the underlying substrate 22 from oxidation and
enables the ceramic layer30 to more tenaciously adhere to
the substrate 22. A preferred bond layer 26 is formed by a
nickel-base alloy powder, such as NiCrATY, or an interme
tallic nickel aluminide, which has been deposited on the
surface ofthe substrate 22to athickness ofabout20to about
125micrometers. Followingdeposition ofthebondlayer26,
an oxide layer 28 such as alumina may be formed at an
elevated processing temperature. The oxide layer 28 pro
videsasurfacetowhichthe ceramic layer30cantenaciously
adhere, thereby promoting the resistance of the coating
system 20 to thermal shock.
A preferred method for depositing the bond layer 26 is
vapor deposition for aluminide coatings or a low pressure
6. 5,683,825
5
plasma spray (LPPS) fora NiCrAIYbond coat,thoughit is
foreseeablethatotherdeposition methods such asairplasma
spray(APS)oraphysicalvapordeposition(PWD)technique
could be used. Importantly, the resulting bond layer 26
and/or the substrate 22 are polished to have an average
surface roughness R of at most about two micrometers2
(abouteightymicro-inches),asmeasuredinaccordancewith
standardized measurementprocedures, witha preferred sur
face roughness being at mostabout one micrometer R. In
accordancewiththisinvention, asmoothersurfacefinishfor
the bond layer 26 promotes the erosion resistance of the
ceramic layer30, though the mechanism by which such an
improvement is obtained is unclear. Notably, though U.S.
Pat No. 4,321,310 to Ulion et al. teaches thatan improved
thermal fatigue cycle life ofa thermal barriercoating could
be achieved by polishing the interface between the bond
layer and its overlaying oxide layers, no indication of an
improvementwastaught or suggestedforenhanced erosion
resistance ofthe ceramic layer.
The ceramic layer 30 is deposited by a physical vapor
deposition (PWD) in orderto produce the desiredcolumnar
grain structure for the ceramic layer 30, as represented in
FIG. 2. Apreferred material for the ceramic layer 30 is an
yttria-stabilized zirconia (YSZ), a preferred composition
being about6toabout8 weightpercentyttria,though other
ceramic materials could be used, such as yttria, nonstabi
lized zirconia, or zirconia stabilized by ceria (CeO) or
scandia (Sc.0). The ceramic layer 30 is deposited to a
thickness that is sufficient to provide the required thermal
protection forthe blade 10, generally on the order ofabout
75 to about 300 micrometers. According to this invention,
the use of a PVD yttria-stabilized zirconia for the ceramic
layer 30, and particularly a ceramic layer 30 deposited by
electron beam physical vapor deposition (EBPWD), is an
important aspect of the invention because of an apparent
ability for such materials to resist erosion better than air
plasma sprayed (APS) YSZ and other ceramics.
Additionally, EBPVDceramic coatings exhibitgreaterdura
bilitytothermal cyclingduetotheirstrain-tolerantcolumnar
microstructure.
While PVD techniques employedinthe artfordepositing
thermal barrier coatings conventionally entail rotating the
targeted component, a preferred technique ofthis invention
istoholdthecomponentessentially stationary.Accordingto
thisinvention, maintainingthe component stationary during
the PVD process has been found to yield a denser yet still
columnar grain structure, and results in a significant
improvementin erosion resistance forthe ceramic layer 30.
Though the basisforthisimprovementis unclear,it maybe
that erosion resistance is enhanced as a result of the
increased density ofthe ceramic layer 30.
To achieve a substantially greater level of erosion
resistance,theceramiclayer30ofthisinventionisprotected
by an impact and erosion-resistant composition that can
either overlay the ceramic layer30 as a wear coating 24 as
shownin FIG.2, orbe co-depositedwithorimplantedin the
ceramic layer 30 as discrete particles 24a, so as to be
dispersed in the ceramic layer30 as represented by FIG. 3.
Furtherimprovements in erosion resistance can be achieved
in accordance with this invention by improving the surface
finish of the EBPVD ceramic layer by a process such as
polishing or tumbling prior to depositing the erosion
resistant composition.
The preferred method is to deposit the erosion-resistant
composition as the distinct wear coating24 represented by
FIG. 2. By this method, the impact and erosion-resistant
wear coating 24 can be readily deposited by EBPVD,
10
15
20
25
30
35
45
50
55
65
6
sputtering or chemical vapor deposition (CVD) to com
pletely cover the ceramic layer 30. Furthermore, the wear
coating 24 provides a suitable base on which multiple
alternating layers of the ceramic layer 30 and the wear
coating 24 can be deposited, as suggested in phantom in
FIG. 2, to provide a more gradual loss ofboth the erosion
protection provided by the wear coating 24 and thermal
protection provided by the ceramic layer 30.
According to this invention, erosion-resistant composi
tions compatiblewiththe ceramic layer30include alumina
and silicon carbide. As a discrete coating over the ceramic
layer 30, alumina is preferably deposited to a thickness of
about twenty to about eighty micrometers by an EBPVD
technique,while silicon carbideispreferably depositedtoa
thickness of about ten to about eighty micrometers by
chemical vapor deposition. Notably, while theprior arthas
suggested and often advocated the presence of a thin alu
mina layer (such asthe oxidelayer28) beneath the ceramic
layer of a thermal barrier coating system, the use of an
alumina layeras an outerwear coating for athermal barrier
coating system has not. Generally, the lower coefficient of
thermal expansion of alumina and silicon carbide would
promotespallationiftheentirecoating20werecomposedof
these dense, low expansion materials. In accordance with
thisinvention,itisbelieved thatuseofan alumina orsilicon
carbidewear coating24 overa columnarYSZceramic layer
30 enables strain to be accommodated while imparting
greater impact and erosion resistance for the coating 20.
Furthermore, the use of silicon carbide as an outer wear
surface for a thermal barrier coating system has not been
suggested, presumably because silicon carbide is readily
oxidized to form silicon dioxide, which reacts with yttria
stabilized zirconia to form zircon and/or yttrium silicites,
thereby promoting spallation. Surprisingly, when deposited
at theprescribed limited thicknesses, silicon carbide as the
wear coating 24 does not exhibit this tendency, but instead
has been found to form an adherent coating that fractures
and expands with the columnar microstructure of the
ceramic layer 30, and is therefore retained on the ceramic
layer 30 as an erosion-resistant coating. Deposition tech
niques that deposit silicon carbide particles between col
umns of the columnar grain structure may promote
spallation, and is to be avoided.
As notedabove, FIG.3 represents an embodiment ofthis
invention in which the erosion-resistant composition is
dispersed in the ceramic layer 30 as discrete particles 24a.
Sucharesultcanbeachievedbyco-depositingorimplanting
the erosion-resistant composition and the ceramic layer 30
usingknownphysicalvapordepositiontechniques.Withthis
approach, the preferred erosion-resistant composition is
aluminain amounts ofpreferably notmorethanabouteighty
weight percent, and more preferably not more than about
fifty weightpercent, of the ceramic layer 30.
Comparative erosion tests were run to evaluate the effec
tiveness ofthe erosion-resistantcompositions ofthis inven
tion. One test involved preparing specimens of the nickel
superalloy IN 601 by vapor phase aluminiding the surfaces
of the specimens to a thickness of aboutfifty micrometers.
An EBPVD columnarYSZceramiclayerwasthen deposited
to a thickness of about 130 micrometers (about 5 mills).
Siliconcarbidewearcoatings ofeitherabout 13 micrometers
(0.5 mil) or about25 micrometers (1 mil) were then depos
itedonsomeofthespecimens,whileotherswere notfurther
treatedin ordertoestablishacontrolgroup.Advantageously,
the silicon carbide wear coatings mimicked the surface
finish ofthe underlying ceramic layer,thereby avoiding the
considerable difficulty thatwould be otherwise encountered
7. 5,683,825
7
toSmooth the silicon carbidewearcoatinginpreparationfor
a subsequently deposited layer.
The specimens were then erosion testedatroomtempera
ture for various durations with alumina particles directed
from a distance ofaboutten centimeters ata speed ofabout
six meters per second (abouttwenty feetper second) and at
an angle of about ninety degrees to the surface of the
specimens. After normalizing the results for the test dura
tions used, the specimens with the silicon carbide wear
coatingswerefound to exhibitan approximately30percent
reduction in erosion depthand an approximately 50 percent
reduction in weight loss as compared to the uncoated
specimens of the control group.
Asecond series oftests involvedpreparing specimens of
the nickel superalloy Rene N5, which for convenience are
designated below as Groups Athrough E to distinguish the
various processing methods employed.All specimens were
vapor phase aluminided to a thickness of about fifty
micrometers to form a bond layer.
Group A and B Specimens
Following deposition of the bond layer, and prior to
deposition of an EBPVD columnar ceramic layer, the sur
face finishes of the bond layers for all specimens were
determined. Specimens having a surface finish of about2.4
micrometers R (about94micro-inches R.)were designated
GroupA, while the remaining specimens were polished to
achieve a surfacefinish ofabout 1.8 micrometers R (about
71 micro-inches R).An EBPVDcolumnarceramic layerof
7 percent YSZ was then deposited on the specimens of
Groups A and B to achieve a thickness of about 125
micrometers. Deposition was conducted while the speci
mens were rotated ata rate ofabout 6 rpm, which is within
a rangeconventionallypracticedintheart.TheGroupAand
B specimens were then set aside for testing, while the
remaining specimens underwentfurther processing.
Group C Specimens
In contrast to the specimens ofGroupsAand B (as well
as Groups D, Eand F),which were rotated ata rate ofabout
six rpm during deposition of the ceramic layer, 7 percent
YSZ ceramic layers were deposited on the Group C speci
mens while holding the specimens stationary. As with the
EBPVD columnar ceramic layers of Groups A and B, the
final thicknesses of the ceramic layers were about 125
micrometers.
Group D Specimens
Following deposition of a 7 percent YSZ ceramic layer
having a thickness of about 25 micrometers, each of the
Group D specimens underwentasecond deposition process
bywhichan aluminawearcoatingwasformed. Each speci
menwascoatedwithanapproximately50micrometersthick
wear coating of alumina using EBPVD.
Group E Specimens
Alumina was co-deposited with a7 percentYSZ ceramic
layeroneach oftheGroupEspecimens.Thethicknessofthe
ceramic layerwas about 125 micrometers.The aluminawas
co-deposited atone oftwo rates,with the lower rate (Group
E1) achieving an alumina contentofabout3 weightpercent
ofthe ceramic layer and the higher rate (Group E2) achiev
ing an alumina content of about45 weight percent.
All of the above specimens were then erosion tested in
essentiallytheidentical mannerdescribedforthespecimens
coated with silicon carbide wear coatings. The results of
these tests are summarized below in Table I after being
normalized for the test durations used, with the percent
change in erosion being relative to the GroupAspecimens.
10
15
20
25
30
35
40
45
50
55
65
TABLE
Condition Percent
Group Evaluated Change
A. Control -
B Bond layer surface finish -1.4%
C Rotation (stationary) -27
D Alumina coating -41
E1 Alumina disp. in YSZ (3%) -51
E2 Alumina disp. in YSZ (45%) -42
From the above, it is apparent that significant improve
ments in erosion resistance can be achieved by each of the
above modifications. Most notably, the greatest improve
ment in erosion resistance corresponded to the presence of
about 3 weight percent alumina dispersed in a columnar
YSZ, the embodimentofthis invention represented in FIG.
3. A significant decrease in erosion resistance was apparent
asthe level ofaluminain theceramiclayerincreasedtoward
about 50 weightpercent, Employing an alumina wear coat
ing over a columnarYSZceramiccoating, as representedin
FIG. 2, also achieved a significantimprovementin erosion
resistanceforthe thermal barrier coating systems tested. In
practice, an alumina wear coating over a columnar YSZ
ceramic coating is preferred as a technique for achieving
enhanced erosion resistance for thermal barrier coatings
because of easier processing. Advantageously, the alumina
wear coating also improves the resistance of the thermal
barrier coating to chemical and physical interactions with
any deposits that may occur during engine service.
Based on the above results, it is foreseeable that an
optimal thermal barrier coating system could be achieved
with a columnar YSZ ceramic layer 30 deposited using a
physical vapor deposition technique, combined with a sur
facefinish ofabouttwo micrometers R orlessforthebond
layer26(as indicated by the Group B specimens), keeping
the targeted specimen stationary during deposition of the
ceramic layer 30 (as indicated by the Group C specimens),
and providing alumina or silicon carbide in the form of
eithera coating over the ceramic layer30 or a dispersionin
the ceramic layer30(as indicatedbythe siliconcarbidetest
specimens and the Group D and E specimens).
While our invention has been described in terms of a
preferred embodiment, itis apparent that otherforms could
beadopted by one skilled in the art.Accordingly,the scope
of our invention is to be limited only by the following
claims.
What is claimed is:
1.An erosion-resistantthermalbarrier coatingformed on
an article subjected to particulate impact erosion and wear,
the thermal barrier coating comprising:
a metallic oxidation-resistant bond layer covering a sur
face of the article;
a columnar ceramic layer formed on the bond layer by a
physical vapor deposition technique; and
an erosion-resistant composition present in the thermal
barrier coatingso as to inhibiterosion ofthe columnar
ceramic layer, the erosion-resistant composition con
sisting essentially ofa material chosen from thegroup
consisting of silicon carbide and alumina.
2.Athermal barrier coating as recited in claim 1 wherein
the erosion-resistantcomposition is a wear coatingoverlay
ing the columnar ceramic layer so as to serve as a physical
barrier to particulate impact and erosion of the columnar
ceramic layer.
3.Athermal barrier coating as recited in claim 2 wherein
the columnar ceramic layer consists essentially of zirconia
stabilized by about 6 to about 8 weight percent yttria.
8. 5,683,825
4.Athermal barrier coating as recited in claim2 wherein
the thermal barrier coating further comprises at least a
second columnar ceramic layer overlaying the erosion
resistantcomposition and atleasta seconderosion-resistant
composition overlayingthe secondcolumnarceramic layer.
5.Athermal barrier coatingas recitedin claim 1 wherein
the erosion-resistantcomposition is dispersedin the colum
narceramic layerso asto renderthecolumnarceramiclayer
more resistant to erosion.
6.Athermal barrier coatingas recited in claim 5 wherein
the columnar ceramic layer consists essentially of yttria
stabilizedzirconiaandtheerosion-resistantcomposition,the
erosion-resistant composition being alumina and constitut
ing upto about 45 weightpercent ofthe columnar ceramic
layer.
7. Athermal barrier coatingas recited in claim 1 wherein
the bond layer has an average surface roughness R of not
more than about two micrometers.
8.Athermal barrier coatingas recited in claim1 wherein
the erosion-resistantcomposition is deposited by aphysical
or chemical vapor deposition technique.
9.Animpactand erosion-resistantthermalbarriercoating
formedona superalloyarticlesubjectedtoerosionandwear,
the thermal barrier coating comprising:
a metallic oxidation-resistant bond layer covering a sur
face ofthe superalloy article;
a columnar ceramic layerformed on the bond layer by a
physical vapor deposition technique, the columnar
ceramiclayercomprisingyttria-stabilizedzirconia;and
an erosion-resistant coating formed on the columnar
ceramic layer so as to serve as a physical barrier to
erosion of the columnar ceramic layer, the erosion
resistant composition consisting essentially ofa mate
rial chosenfromthegroupconsistingofsilicon carbide
and alumina.
10.Athermal barriercoatingasrecitedin claim.9wherein
the columnar ceramic layer consists essentially of zirconia
stabilized by about 6 to about 8 weight percent yttria.
11.Athermalbarrier coatingas recitedin claim9wherein
the thermal barrier coating further comprises at least a
second columnar ceramic layer overlaying the erosion
resistantcomposition and at leasta second erosion-resistant
composition overlayingthe second columnar ceramic layer.
12.Athermal barrier coatingasrecitedinclaim.9wherein
the bond layer has an average surface roughness R of not
more than about two micrometers.
13.An impactand erosion-resistantthermal barrier coat
ingformed on a superalloy article subjected to erosion and
wear, the thermal barrier coating comprising:
O
15
20
25
35
45
10
a metallic oxidation-resistant bond layer covering a sur
face ofthe superalloy article;
a columnar ceramic layerformed onthe bond layerby a
physical vapor deposition technique, the columnar
ceramic layer comprising zirconia; and
an erosion-resistant composition dispersed in the colum
narceramiclayerso asto renderthe columnarceramic
layer more resistant to erosion, the erosion-resistant
composition consisting essentially of alumina.
14. A thermal barrier coating as recited in claim 13
wherein the zirconia of the columnar ceramic layer is
stabilizedwithyttria, and the erosion-resistant composition
constitutes up to about 45 weight percent ofthe columnar
ceramic layer.
15. A thermal barrier coating as recited in claim 13
wherein thebondlayerhasan averagesurfaceroughness R.
of not more than about two micrometers.
16.Amethodforformingan impactand erosion-resistant
thermal barrier layer on an article, the method comprising
the steps of:
forming a metallic oxidation-resistant bond layer on a
surface ofthe article;
forminga columnar ceramic layer on the bond layerby a
physical vapor deposition technique; and
providinganerosion-resistantcompositionin thethermal
barrier coating so as toinhibiterosion ofthe columnar
ceramic layer, the erosion-resistant composition con
sisting essentially ofa material chosen fromthe group
consisting of silicon carbide and alumina.
17. A method as recited in claim 16 wherein the step of
forming the bond layer results in the bond layer having an
average surface roughness R of not more than about two
micrometers.
18. A method as recited in claim 16 wherein the step of
forming the columnar ceramic layer includes maintaining
thearticle stationary while depositingthe columnarceramic
layer usingthe physical vapor deposition technique.
19. A method as recited in claim 16 wherein the step of
providing the erosion-resistant composition entails forming
a layer ofthe erosion-resistantcomposition overthe colum
nar ceramic layer.
20. A method as recited in claim 16 wherein the step of
providing the erosion-resistant composition entails forming
adispersionofparticlesofthe erosion-resistantcomposition
in the columnar ceramic layer.
s: it k -k sk