The tomato crop guide provides a thorough knowledge base for tomato growers, from general information to growing conditions, to plant nutrition and fertilization recommendations under various growth environments. All meant to help you to get the most out of your tomato fertilizer.
Production technology for vegetable and spices : DRUMSTICK ' MORINGASoudip Nandi
This document provides information on drumstick (Moringa oleifera) cultivation. It discusses the plant's origin in Africa and Asia, describes its physical characteristics as a fast-growing deciduous tree reaching 32-40 feet tall with tripinnate leaves. It also outlines ideal soil and climate conditions for cultivation, common varieties grown in India, and cultural practices including planting methods, manuring, irrigation, pest and disease management, harvesting, and potential yields.
This document provides information about rose cultivation. It begins with an introduction to roses and then discusses their importance, uses, botanical description, classification, varieties suitable for protected cultivation, propagation methods, climate requirements, soil needs, cultural practices like irrigation, fertilization, planting, use of plant growth regulators, disease management, effects of preservatives on vase life, transport, and yield. The document contains detailed information on growing roses successfully as a flower crop.
Bottle gourd is commonly grown in India, Africa, and Central America. It has cooling and digestive properties and its fruits, leaves, and seeds can be used for medicinal purposes or to make dishes like halva, kheer, and pickles. Bottle gourd is a vine that grows best in warm weather with adequate sunlight and support from a trellis. It has varied shaped fruits that are harvested young and tender for use as a vegetable or allowed to mature for uses like making containers. Proper training, pruning, harvesting, and post-harvest handling are required to maximize yields which average 20-25 tons/hectare for open pollinated varieties and 40-50 tons/hectare
This document provides information about grapes, including their botanical name, origin, nutritional value, varieties, and cultivation practices. It discusses seeded and seedless varieties of grapes grown in India and their uses. It also describes grape cultivation methods, including establishment of vineyards, planting systems, training methods, and rootstock selection. The key information provided includes that grapes are native to Armenia, Thompson Seedless is a popular variety, and head and bower systems are common training methods.
The potato is a tuber that was botanically named Solanum tuberosum in 1596. It develops from underground stolons and stores starches and sugars. Tubers vary widely in size, weight, and color. They have scars from scale leaves, multiple eyes that are axillary buds, lenticels for gas exchange, and an almost impermeable skin for protection. Potatoes are grown for their starchy tubers which are eaten around the world.
Cucumber Crop Guide - Cucumber FertilizerHaifa Group
Haifa's crop guide covers all the aspects of cucumber plant nutrition: growth stages, how to grow cucumbers, fertilization recommendation and much more.
Haifa's deep understanding in cucumber plant nutrition is fully exploited in this comprehensive crop guide.
Chrysanthemums are a popular commercial flower crop that originated in Asia and Europe. They are classified based on plant growth as standards, sprays, or pot mums. Standards have a single large flower, while sprays have many small flowers and are used for garlands. Chrysanthemums prefer sandy loam soil and require pinching, disbudding, and other care techniques to promote branching and optimal flowering. They are harvested based on flower development and can be packed for domestic or export markets.
Elephant foot yam is a tropical tuber crop originating from Asia and Africa. It is commercially cultivated in several Southeast Asian countries as well as India. The document discusses the botany, varieties, cultivation practices, pests and diseases of elephant foot yam. Key points include that it grows from a corm and is propagated through daughter corms. It prefers sandy loam soil and humid tropical conditions. Common varieties include Santragachi and Kovvur. Proper spacing, fertilization, irrigation, and intercropping can yield 12-22 tonnes per hectare. Pests include aphids and diseases include collar rot.
Production technology for vegetable and spices : DRUMSTICK ' MORINGASoudip Nandi
This document provides information on drumstick (Moringa oleifera) cultivation. It discusses the plant's origin in Africa and Asia, describes its physical characteristics as a fast-growing deciduous tree reaching 32-40 feet tall with tripinnate leaves. It also outlines ideal soil and climate conditions for cultivation, common varieties grown in India, and cultural practices including planting methods, manuring, irrigation, pest and disease management, harvesting, and potential yields.
This document provides information about rose cultivation. It begins with an introduction to roses and then discusses their importance, uses, botanical description, classification, varieties suitable for protected cultivation, propagation methods, climate requirements, soil needs, cultural practices like irrigation, fertilization, planting, use of plant growth regulators, disease management, effects of preservatives on vase life, transport, and yield. The document contains detailed information on growing roses successfully as a flower crop.
Bottle gourd is commonly grown in India, Africa, and Central America. It has cooling and digestive properties and its fruits, leaves, and seeds can be used for medicinal purposes or to make dishes like halva, kheer, and pickles. Bottle gourd is a vine that grows best in warm weather with adequate sunlight and support from a trellis. It has varied shaped fruits that are harvested young and tender for use as a vegetable or allowed to mature for uses like making containers. Proper training, pruning, harvesting, and post-harvest handling are required to maximize yields which average 20-25 tons/hectare for open pollinated varieties and 40-50 tons/hectare
This document provides information about grapes, including their botanical name, origin, nutritional value, varieties, and cultivation practices. It discusses seeded and seedless varieties of grapes grown in India and their uses. It also describes grape cultivation methods, including establishment of vineyards, planting systems, training methods, and rootstock selection. The key information provided includes that grapes are native to Armenia, Thompson Seedless is a popular variety, and head and bower systems are common training methods.
The potato is a tuber that was botanically named Solanum tuberosum in 1596. It develops from underground stolons and stores starches and sugars. Tubers vary widely in size, weight, and color. They have scars from scale leaves, multiple eyes that are axillary buds, lenticels for gas exchange, and an almost impermeable skin for protection. Potatoes are grown for their starchy tubers which are eaten around the world.
Cucumber Crop Guide - Cucumber FertilizerHaifa Group
Haifa's crop guide covers all the aspects of cucumber plant nutrition: growth stages, how to grow cucumbers, fertilization recommendation and much more.
Haifa's deep understanding in cucumber plant nutrition is fully exploited in this comprehensive crop guide.
Chrysanthemums are a popular commercial flower crop that originated in Asia and Europe. They are classified based on plant growth as standards, sprays, or pot mums. Standards have a single large flower, while sprays have many small flowers and are used for garlands. Chrysanthemums prefer sandy loam soil and require pinching, disbudding, and other care techniques to promote branching and optimal flowering. They are harvested based on flower development and can be packed for domestic or export markets.
Elephant foot yam is a tropical tuber crop originating from Asia and Africa. It is commercially cultivated in several Southeast Asian countries as well as India. The document discusses the botany, varieties, cultivation practices, pests and diseases of elephant foot yam. Key points include that it grows from a corm and is propagated through daughter corms. It prefers sandy loam soil and humid tropical conditions. Common varieties include Santragachi and Kovvur. Proper spacing, fertilization, irrigation, and intercropping can yield 12-22 tonnes per hectare. Pests include aphids and diseases include collar rot.
This document provides information on seed production techniques for cole crops such as cabbage, cauliflower, kale, and broccoli. It discusses the origin and importance of cole crops, as well as details on their scientific names, chromosome numbers, pollination type, and plant parts used. It then describes the methods of seed production for cabbage and cauliflower, including the in situ method, transplanting method, stump method, and head intact method. It also covers vernalization, special approaches like blanching and tying, and disbudding and staking. Finally, it discusses genetic mechanisms for hybrid seed production like self-incompatibility and cytoplasmic male sterility in cole crops.
Alternate bearing refers to the tendency of some plants to produce heavy yields of fruit in one year followed by a light yield the next year in a cyclical pattern. This causes significant economic problems for growers by creating inconsistent supply and lower quality crops in heavy yield years. Several theories exist for the cause of alternate bearing, including hormonal imbalance and competition between vegetative and reproductive growth, and it can be influenced by both endogenous genetic and environmental factors. Common measures used by growers to overcome biennial bearing include proper orchard management, regulating flowering, thinning crops, pruning, and growing cultivars less prone to the issue.
This document provides information about strawberry production including its classification, varieties, cultivation practices, pests, and diseases. It discusses that strawberry is a short day, perennial herb rich in vitamin C and iron. The major varieties grown in India are Chandler, Tioga, Torrey, Selva, and Belrubi. Matted row system is commonly used for training. Proper soil preparation, irrigation, nutrition management and pest/disease control are required for successful cultivation.
- The document discusses the production technology of bulbous crops like onion and garlic. It provides details on various aspects of cultivation such as soil and climatic requirements, varieties grown in different regions of India, propagation, planting methods, manure and fertilizer application, irrigation practices, and physiological disorders. It also lists the botanical classification and importance of onion and garlic as important bulb crops in India.
Important Physiological Disorders of MangoMeezan Ali
The presentation discusses important physiological disorders that affect mango crops and their management. It identifies four key disorders - alternate bearing, clustering, black tip, and mango malformation. Each disorder is described in 1-2 sentences along with its causes and recommended control methods such as using plant growth regulators, pruning, and avoiding pesticide use during flowering. The presentation emphasizes that physiological disorders are caused by various genetic, environmental, and cultural factors, and that proper management practices can help prevent disorders and improve mango yields and quality.
The document provides information on tissue cultured pomegranate plant cultivation. It discusses key aspects such as variety selection, orchard establishment, planting methods, pruning, irrigation, fertilizer application, pest and disease management. The leading variety recommended is Bhagawa due to its large fruit size, sweet taste and high demand. Proper cultural practices including regular pruning, irrigation and fertilization are needed to establish high yielding orchards and ensure quality fruit production.
This document provides information on the production technology of black pepper (Piper nigrum). It describes the plant description, propagation methods, climatic and soil requirements, and common varieties. It also discusses the different types of shoots produced, plantation establishment, cultural practices including training, manure and fertilizer application, pest and disease management, harvesting and processing. The typical yield from a mature plantation is 800-1000 kg of black pepper per hectare annually.
India is the world's largest producer and exporter of chilli. The three main chilli producing states are Andhra Pradesh, Telangana, and Karnataka. Chilli is an important crop due to its nutritional value as well as its use in curry powders. Hybrid seed production of chilli requires growing a female parent line separately from a male parent line to allow for controlled cross-pollination. Daily emasculation and pollination is needed to produce hybrid seeds, which are then harvested, processed, and certified based on quality standards.
Protected cultivation involves growing plants inside structures that protect them from environmental factors. It allows for higher quality and more productive cultivation year-round. Greenhouse rose cultivation provides benefits like improved quality, higher yields, and ability to harvest off-season. Key factors that affect rose cultivation include soil type, climate, temperature, light, carbon dioxide, humidity, irrigation, fertilization, weed control, and pest and disease management. Proper techniques such as pruning, disbudding, training, and harvesting are required to optimize rose production.
Peach physiological disorders A Lecture By Allah Dad Khan To FFS TraineeMr.Allah Dad Khan
Nectarine physiological disorders include chilling injury, skin discoloration, and internal issues. Chilling injury causes flesh browning and lack of juiciness in late-season cultivars after cold storage. Skin discoloration, called inking, is caused by abrasion damage combined with heavy metal contamination from sprays near harvest. Internal issues like browning, mealiness and dryness appear after cold storage when fruit is brought to room temperature during ripening. Proper temperature management and breeding resistant cultivars can help prevent chilling injury.
A tree is a perennial plant with an elongated stem, or trunk, supporting branches and leaves in most specie, they give a mass effect and beautiful look to the localities.
The cultivation of tree is called arboriculture.
The place where trees are grown either for landscaping or for scientific study is known as arboretum
Marigold - introduction and uses – varieties - soil and climate and planting systems - weed, nutrition and irrigation management –special horticultural practices - role of growth regulators- harvest index and yield
This document provides information and guidelines for sorghum seed production. It discusses selecting land with good drainage for production. Isolation distances should be maintained to avoid contamination from other varieties. Seeds should be treated and stored properly. The optimal seasons for production are June-July and October-November. Quality seeds above 2000kg/ha can be harvested if proper procedures are followed at each growth stage from land preparation to post-harvest processing. Seed certification ensures the genetic, physical and health quality standards are met.
This document discusses major insect pests that affect solanaceous crops like potato and tomato, and their management. It identifies pests like fruit borer, leaf miners, whiteflies, aphids, and cutworms. It recommends integrated pest management strategies like growing resistant varieties, cultural controls like crop rotation, and biological controls using parasites and predators. It also provides details on effective chemical controls using targeted insecticides to manage specific pests. The conclusion emphasizes the use of integrated approaches and biopesticides to control solanaceous crop insects in a sustainable manner.
Gladiolus is a popular flowering plant grown for its inflorescences and cutflowers. There are several types of gladiolus classified based on flower and plant characteristics. Grandiflorus types have large flowers arranged closely on long spikes, while primulinus types have smaller spaced flowers on shorter spikes. Gladiolus is propagated through corms and cormels and prefers well-draining, nutrient-rich soil with a pH between 5.5-6.5. Planting is done in fall and corms are spaced 15-20cm apart. Pests like thrips and diseases like fusarium rot must be controlled. Flower spikes are harvested when lower florets open and
This document provides information on grapes (Vitis vinifera) including their botanical name, origin, uses, cultivation practices, varieties grown in India, and pest and disease management. Some key points:
- Grapes are one of the most nutritious and refreshing fruits, originating from the Mediterranean and Central Asia. They are rich in sugars and vitamins.
- In India, grapes are mainly used for table purposes (80%) with the remaining used for raisins (10%) and wine production (10%). The major grape growing regions are Nashik in Maharashtra and Sangli.
- Common grape varieties grown in India include Thompson Seedless, Anab-e-Shahi, and Cheema
The document discusses poppy (Papaver somniferum), including its nomenclature, origin and history, botany and morphology, medicinal uses, production technology, and pest and disease management. It notes that poppy cultivation began around 3,400 BC in Mesopotamia and spread along the Silk Road. Today it is cultivated primarily in Khyber Pakhtunkhwa province of Pakistan and along the Pakistan-Afghanistan border. When grown using recommended practices, poppy can yield 400-500 kg/ha of seeds and 400-500 kg/ha of crude latex, with a net profit of around 77,500 rupees per hectare.
This document provides information about geranium, including its botanical name (Geranium graveolens), family (Geraniaceae), center of origin (Cape province of South Africa), and economic part (leaves). It describes geranium as a bushy aromatic plant used in cosmetics and perfumes. It also outlines ideal growing conditions and methods for propagating, cultivating, harvesting, and distilling geranium to extract its essential oil.
Gerbera - introduction and uses – varieties – media and environment- Fumigation - filed preparation - planting systems – nutrition and fertigation - weed management – training and pruning – special horticultural practices - role of growth regulators- physiological disorders and its control measures- harvest index and yield
The detail cultivation of chrysanthemum is explained in this ppt useful for the agriculture as well as horticulture students.
especially the course of HORT-354 Production technology for ornamental crops, MAP and landscaping.
The points useful for the chrysanthemum cultivation study is discuss in this ppt
Crop production is influenced by many genetic and environmental factors. Only 7% of land has suitable conditions for crop growth without advanced technology. Key factors include temperature, precipitation, solar radiation, and atmospheric gases. Temperature affects crop growth through biochemical reactions and influences cardinal temperature points. The right amount of precipitation and solar radiation are essential for photosynthesis and water requirements. Relative humidity and vapor pressure deficit impact evapotranspiration. Understanding these factors is important for optimizing crop yields.
This document provides information about tomato cultivation. It discusses the introduction of tomato including its scientific name, most common varieties, and uses. It also outlines the climate and soil requirements, cultivation practices like land preparation, manure application, irrigation, and harvesting. Some physiological disorders and pests that affect tomato are also mentioned. The document is technical in nature and provides detailed information and guidelines related to growing tomatoes as a crop.
This document provides information on seed production techniques for cole crops such as cabbage, cauliflower, kale, and broccoli. It discusses the origin and importance of cole crops, as well as details on their scientific names, chromosome numbers, pollination type, and plant parts used. It then describes the methods of seed production for cabbage and cauliflower, including the in situ method, transplanting method, stump method, and head intact method. It also covers vernalization, special approaches like blanching and tying, and disbudding and staking. Finally, it discusses genetic mechanisms for hybrid seed production like self-incompatibility and cytoplasmic male sterility in cole crops.
Alternate bearing refers to the tendency of some plants to produce heavy yields of fruit in one year followed by a light yield the next year in a cyclical pattern. This causes significant economic problems for growers by creating inconsistent supply and lower quality crops in heavy yield years. Several theories exist for the cause of alternate bearing, including hormonal imbalance and competition between vegetative and reproductive growth, and it can be influenced by both endogenous genetic and environmental factors. Common measures used by growers to overcome biennial bearing include proper orchard management, regulating flowering, thinning crops, pruning, and growing cultivars less prone to the issue.
This document provides information about strawberry production including its classification, varieties, cultivation practices, pests, and diseases. It discusses that strawberry is a short day, perennial herb rich in vitamin C and iron. The major varieties grown in India are Chandler, Tioga, Torrey, Selva, and Belrubi. Matted row system is commonly used for training. Proper soil preparation, irrigation, nutrition management and pest/disease control are required for successful cultivation.
- The document discusses the production technology of bulbous crops like onion and garlic. It provides details on various aspects of cultivation such as soil and climatic requirements, varieties grown in different regions of India, propagation, planting methods, manure and fertilizer application, irrigation practices, and physiological disorders. It also lists the botanical classification and importance of onion and garlic as important bulb crops in India.
Important Physiological Disorders of MangoMeezan Ali
The presentation discusses important physiological disorders that affect mango crops and their management. It identifies four key disorders - alternate bearing, clustering, black tip, and mango malformation. Each disorder is described in 1-2 sentences along with its causes and recommended control methods such as using plant growth regulators, pruning, and avoiding pesticide use during flowering. The presentation emphasizes that physiological disorders are caused by various genetic, environmental, and cultural factors, and that proper management practices can help prevent disorders and improve mango yields and quality.
The document provides information on tissue cultured pomegranate plant cultivation. It discusses key aspects such as variety selection, orchard establishment, planting methods, pruning, irrigation, fertilizer application, pest and disease management. The leading variety recommended is Bhagawa due to its large fruit size, sweet taste and high demand. Proper cultural practices including regular pruning, irrigation and fertilization are needed to establish high yielding orchards and ensure quality fruit production.
This document provides information on the production technology of black pepper (Piper nigrum). It describes the plant description, propagation methods, climatic and soil requirements, and common varieties. It also discusses the different types of shoots produced, plantation establishment, cultural practices including training, manure and fertilizer application, pest and disease management, harvesting and processing. The typical yield from a mature plantation is 800-1000 kg of black pepper per hectare annually.
India is the world's largest producer and exporter of chilli. The three main chilli producing states are Andhra Pradesh, Telangana, and Karnataka. Chilli is an important crop due to its nutritional value as well as its use in curry powders. Hybrid seed production of chilli requires growing a female parent line separately from a male parent line to allow for controlled cross-pollination. Daily emasculation and pollination is needed to produce hybrid seeds, which are then harvested, processed, and certified based on quality standards.
Protected cultivation involves growing plants inside structures that protect them from environmental factors. It allows for higher quality and more productive cultivation year-round. Greenhouse rose cultivation provides benefits like improved quality, higher yields, and ability to harvest off-season. Key factors that affect rose cultivation include soil type, climate, temperature, light, carbon dioxide, humidity, irrigation, fertilization, weed control, and pest and disease management. Proper techniques such as pruning, disbudding, training, and harvesting are required to optimize rose production.
Peach physiological disorders A Lecture By Allah Dad Khan To FFS TraineeMr.Allah Dad Khan
Nectarine physiological disorders include chilling injury, skin discoloration, and internal issues. Chilling injury causes flesh browning and lack of juiciness in late-season cultivars after cold storage. Skin discoloration, called inking, is caused by abrasion damage combined with heavy metal contamination from sprays near harvest. Internal issues like browning, mealiness and dryness appear after cold storage when fruit is brought to room temperature during ripening. Proper temperature management and breeding resistant cultivars can help prevent chilling injury.
A tree is a perennial plant with an elongated stem, or trunk, supporting branches and leaves in most specie, they give a mass effect and beautiful look to the localities.
The cultivation of tree is called arboriculture.
The place where trees are grown either for landscaping or for scientific study is known as arboretum
Marigold - introduction and uses – varieties - soil and climate and planting systems - weed, nutrition and irrigation management –special horticultural practices - role of growth regulators- harvest index and yield
This document provides information and guidelines for sorghum seed production. It discusses selecting land with good drainage for production. Isolation distances should be maintained to avoid contamination from other varieties. Seeds should be treated and stored properly. The optimal seasons for production are June-July and October-November. Quality seeds above 2000kg/ha can be harvested if proper procedures are followed at each growth stage from land preparation to post-harvest processing. Seed certification ensures the genetic, physical and health quality standards are met.
This document discusses major insect pests that affect solanaceous crops like potato and tomato, and their management. It identifies pests like fruit borer, leaf miners, whiteflies, aphids, and cutworms. It recommends integrated pest management strategies like growing resistant varieties, cultural controls like crop rotation, and biological controls using parasites and predators. It also provides details on effective chemical controls using targeted insecticides to manage specific pests. The conclusion emphasizes the use of integrated approaches and biopesticides to control solanaceous crop insects in a sustainable manner.
Gladiolus is a popular flowering plant grown for its inflorescences and cutflowers. There are several types of gladiolus classified based on flower and plant characteristics. Grandiflorus types have large flowers arranged closely on long spikes, while primulinus types have smaller spaced flowers on shorter spikes. Gladiolus is propagated through corms and cormels and prefers well-draining, nutrient-rich soil with a pH between 5.5-6.5. Planting is done in fall and corms are spaced 15-20cm apart. Pests like thrips and diseases like fusarium rot must be controlled. Flower spikes are harvested when lower florets open and
This document provides information on grapes (Vitis vinifera) including their botanical name, origin, uses, cultivation practices, varieties grown in India, and pest and disease management. Some key points:
- Grapes are one of the most nutritious and refreshing fruits, originating from the Mediterranean and Central Asia. They are rich in sugars and vitamins.
- In India, grapes are mainly used for table purposes (80%) with the remaining used for raisins (10%) and wine production (10%). The major grape growing regions are Nashik in Maharashtra and Sangli.
- Common grape varieties grown in India include Thompson Seedless, Anab-e-Shahi, and Cheema
The document discusses poppy (Papaver somniferum), including its nomenclature, origin and history, botany and morphology, medicinal uses, production technology, and pest and disease management. It notes that poppy cultivation began around 3,400 BC in Mesopotamia and spread along the Silk Road. Today it is cultivated primarily in Khyber Pakhtunkhwa province of Pakistan and along the Pakistan-Afghanistan border. When grown using recommended practices, poppy can yield 400-500 kg/ha of seeds and 400-500 kg/ha of crude latex, with a net profit of around 77,500 rupees per hectare.
This document provides information about geranium, including its botanical name (Geranium graveolens), family (Geraniaceae), center of origin (Cape province of South Africa), and economic part (leaves). It describes geranium as a bushy aromatic plant used in cosmetics and perfumes. It also outlines ideal growing conditions and methods for propagating, cultivating, harvesting, and distilling geranium to extract its essential oil.
Gerbera - introduction and uses – varieties – media and environment- Fumigation - filed preparation - planting systems – nutrition and fertigation - weed management – training and pruning – special horticultural practices - role of growth regulators- physiological disorders and its control measures- harvest index and yield
The detail cultivation of chrysanthemum is explained in this ppt useful for the agriculture as well as horticulture students.
especially the course of HORT-354 Production technology for ornamental crops, MAP and landscaping.
The points useful for the chrysanthemum cultivation study is discuss in this ppt
Crop production is influenced by many genetic and environmental factors. Only 7% of land has suitable conditions for crop growth without advanced technology. Key factors include temperature, precipitation, solar radiation, and atmospheric gases. Temperature affects crop growth through biochemical reactions and influences cardinal temperature points. The right amount of precipitation and solar radiation are essential for photosynthesis and water requirements. Relative humidity and vapor pressure deficit impact evapotranspiration. Understanding these factors is important for optimizing crop yields.
This document provides information about tomato cultivation. It discusses the introduction of tomato including its scientific name, most common varieties, and uses. It also outlines the climate and soil requirements, cultivation practices like land preparation, manure application, irrigation, and harvesting. Some physiological disorders and pests that affect tomato are also mentioned. The document is technical in nature and provides detailed information and guidelines related to growing tomatoes as a crop.
Tomatoes can be grown year-round in greenhouses. Several varieties are suitable depending on fruit size and characteristics. Seedlings are started in plug trays and transplanted. Indeterminate varieties require pruning and training of suckers to focus growth. Pollination requires shaking clusters by hand. Fertigation provides nutrients. Pests like whiteflies and diseases like powdery mildew require management. With proper care, greenhouse tomatoes can yield 25-30 tonnes per 1000 square meters.
The potato is a tuber native to South America. It is an important crop grown for its starchy tubers. Potatoes are high yielding and provide carbohydrates, proteins, vitamins and minerals. They are ideally grown in loose, well-drained soil and require adequate rainfall and temperatures between 7-30°C for growth. Diseases, insects, and weeds must be managed to achieve good potato yields.
The growth of a potato plant can be broken down into five stages:
1) Sprout Development - The eyes of the potato sprout and emerge from the soil, using energy stored in the seed potato.
2) Vegetative Growth - Leaves, stems, roots and stolons develop as the plant grows above ground.
3) Tuber Set/Initiation - Small tubers form at the ends of stolons, around the size of jelly beans.
4) Tuber Bulking - Tuber cells expand and accumulate water, nutrients and carbohydrates as tubers enlarge greatly in size.
5) Maturation - Vines die back as photosynthesis decreases and tuber growth
Abiotic stress management in open field vegetablesATMA RAM MEENA
India is the second largest producer of vegetables globally but has low vegetable productivity. Vegetables are important sources of nutrients. Abiotic stresses like temperature extremes negatively impact vegetable growth and yields. Integrated crop management strategies can help overcome abiotic stresses through the use of stress-tolerant varieties, organic farming, protected cultivation, and agronomic practices suited to different climates and vegetable types. Maintaining optimal temperatures, light, and soil conditions enhances vegetable productivity in open cultivation systems.
Tomato and sweet pepper are both members of the Solanaceae family. Tomatoes are native to South America and grow as vines or bushes. They prefer warm temperatures between 21-24°C and well-draining soil. Tomatoes are often picked unripe and ripened with ethylene gas in storage. Sweet peppers are also in the Solanaceae family and native to Central and South America. They grow as annual or perennial plants and prefer warmer temperatures than tomatoes. Both crops require similar growing conditions including fertile, well-draining soil and are susceptible to similar pests and diseases.
This document provides guidelines for hybrid tomato production. It outlines ideal growing conditions, soil selection, land preparation including plowing and applying manure, bed preparation, planting distances, transplanting procedures, fertilizer application, irrigation, pollination, and seed extraction and processing steps. The goal is to produce F1 hybrid seeds through managing male and female parent lines, emasculation of female flowers, controlled pollination, and separating hybrid seeds from non-hybrid seeds at harvest.
This document provides a summary of potato cultivation prepared by several students. It covers the introduction, origin and history, botanical description, varieties, climatic requirements, pests and diseases, true potato seed technology, and post-harvest management of potatoes. Some key points include:
- Potatoes originated in South America and were introduced to India in the 16th-17th century.
- India is the second largest producer of potatoes globally.
- Potato cultivation requires cool temperatures between 17-25°C for growth and 17-19°C for tuberization.
- Important potato diseases include late blight, early blight, brown rot, and wart disease.
- True potato seed technology is an effective,
This document provides information on potential crops suitable for protected cultivation or greenhouse production in Himachal Pradesh, India. It discusses crops like tomato, cucumber, capsicum, and recommends varieties for each. It covers aspects of greenhouse structure, growing media, seedling production, transplanting, training, fertigation, integrated pest management and harvesting procedures to optimize yield for each crop under protected conditions. The key crops highlighted are tomato, cucumber and capsicum with focus on varieties, spacing, pruning, training, fertility and pest management.
This study aims to determine the effect of different organic mulching materials on the growth and yield of tomatoes. Tomato is an important crop in the Philippines. The study will evaluate rice straw, grass cuttings, shredded leaves, and newspaper as mulch and compare the effects on tomato plant height, leaves, fruit number, marketable fruit weight, and total fruit weight. The experiment will use a randomized block design with five treatments and four replications, conducted from February to May 2023 in Sultan Kudatar, Maguindanao, Philippines. Data on plant growth, flowering time, maturity, fruit number, and weight will be collected.
Greenhouse tomato production requires significant labor, management, and light. It is a complicated crop to grow successfully. While startup costs are high, early season production may capture higher prices, making greenhouse tomatoes potentially profitable. Growers must carefully select varieties suited to greenhouse conditions, manage pests and diseases, and provide daily attention to equipment, watering, and pruning. Labor needs average around 25 hours per week for a standard sized greenhouse. Returns over operating costs can range significantly depending on production methods and marketing.
1. Post-harvest losses of horticultural crops in India are estimated between 5.8-18.1% for fruits and 6.9-13% for vegetables due to lack of cold storage, inefficient supply chains, and inaccessibility for small farmers.
2. Biological factors like respiration and ethylene production as well as environmental factors like temperature and humidity influence the deterioration of fruits and vegetables after harvest.
3. Maturity at harvest, harvest method, and post-harvest handling and storage conditions impact the quality and shelf life of horticultural crops. Proper harvest practices and cold storage can help reduce post-harvest losses.
The potato is the world's fourth largest food crop. In Pakistan, potato production has increased significantly over the past decades to become an important crop. It is grown primarily in Punjab province, which accounts for over 85% of national potato production. The three major potato growing seasons in Pakistan are spring, summer, and autumn. Improving potato seed quality, reducing post-harvest losses, and stabilizing prices fluctuations remain ongoing challenges.
Assessment of maturity indices in vegetavles by MD. Ramajnmohammad ramjan
This document discusses maturity indices for assessing the proper harvesting stage for various vegetables. It begins by defining physiological and horticultural maturity. It then describes several methods for determining maturity, including computational, physical, chemical, and physiological methods. Specific maturity indices are provided for 15 different vegetables, including tomatoes, capsicum, onion, sweet potato, okra, moringa, cucumber, bottle gourd, muskmelon, watermelon, garden pea, chilli, potato, cabbage, and knol-khol. The conclusion emphasizes the importance of harvesting vegetables at the proper stage of maturity to ensure quality and shelf life.
This document provides information on tomato crop production in dryland areas. It discusses the origin and distribution of tomatoes, noting they originated in South America and were domesticated in Mexico. The top five producers globally are China, the EU, India, the US, and Turkey. For production, it recommends selecting well-drained soil, acquiring certified seeds, establishing a nursery, transplanting seedlings on ridges or beds, applying fertilizer, harvesting at the turning or mature green stage, and using techniques like staking and pruning to improve yields and quality. The use of a zero-energy cooling chamber can also extend shelf life by maintaining optimal temperature and humidity conditions.
1) Okra (Abelmoschus esculentus) is a rich source of nutrients and thrives in hot, humid climates between 25-30°C. It grows best in loose, well-draining loamy soil with a pH of 6.0-6.8.
2) Varieties recommended for Jammu conditions include Jammu Okra-05, Pusa Sawani, Pusa A-4, Arka Anamika, Varsha Uphar, and Hisar Unnat.
3) Pests that affect okra include jassids, aphids, shoot and fruit borers, red cotton bugs, and whiteflies. Diseases include
Potatoes are a tuber crop grown worldwide for food. A potato plant develops from an underground tuber that has eyes from which sprouts and roots grow. Potatoes are botanically classified as a root vegetable but are actually modified stems called tubers that grow underground. The tubers are planted, they sprout, photosynthesis occurs to develop the plant above ground while also bulking the underground tubers, then the tubers are harvested. Potatoes require cool temperatures, well-drained soil rich in organic matter, and are cultivated through hilling which piles additional soil around the base of the plant as it grows.
Similar to Tomato crop guide - Tomato Fertilizer (20)
What is Nutrigation™? What are the benefits for the crop or the system? Learn what are Haifa Group solutions.
For more information, check our website: www.haifa-group.com
Advanced Agriculture Solutions Supporting Water and Nutrient use efficiencyHaifa Group
Advanced Agricultural Solutions for Supporting Water and Nutrient Use Efficiency
- The holistic approach to plant nutrition management
- Combined nutritional solutions
- Achieving better water use efficiency using efficient fertilizers
- Efficiency management for fertilizer programs
Tal Shani, Marketing Manager - Soluble Fertilizers, Haifa Group
Read Haifa Group Crop Guide for Rice - Haifa's extensive crop guide include information and facts about growing rice, plant nutrition, nutrients deficiency symptoms, fertilization recommendations and more
The pepper guide provides information about the pepper's plant nutrition, general growing conditions, nutritional requirements, fertilization recommendations and more. It help you make the most out of your pepper fertilizer, and as a result get higher yields.
Crop Guide Strawberry - Strawberries fertilizersHaifa Group
Read more about Haifa Group Strawberry Crop Guide - Our detailed crop guide covers all the knowledge areas a strawberry grower needs: including a description of the strawberry plant, optimal conditions and growth practices, and nutrition programs and fertilizer recommendations.
FERTILIZER CALCULATIONS AND PREPARATION OF NPK STOCK SOLUTIONS.
Read this detailed explanation of how to calculation fertilizers content, and convert amount of nutrient to amount of fertilizers. All you needed to know in order to feed your plants properly.
www.haifa-group.com
Haifa Group is a leading global supplier of potassium nitrate, specialty plant nutrients, and industrial chemicals. It has 16 subsidiaries worldwide and annual turnover of around $500 million. Haifa pioneers innovative applications like Nutrigation, which delivers water and nutrients simultaneously through irrigation for optimal plant nutrition. It also develops controlled release fertilizers like Multicote that release nutrients according to plant needs. Haifa's foliar fertilizers can quickly correct deficiencies and boost yields.
Controlled release fertilizers | Haifa GroupHaifa Group
Learn the principals and advantages of CRF (Controlled Release fertilizers). The most reliable and effective way to make the availability of nutrients coincide with plant requirements is by controlling their release into the soil solution, using controlled release fertilizers.
An introduction to professional plant nutrition | Haifa GroupHaifa Group
Explore an in-depth agronomic introduction to plant nutrition. Learn about the essential nutrients crops consume, and the specific role of every mineral on the overall plant growth. Haifa Group’s experts are sharing knowledge. Haifa Group’s experts are sharing knowledge.
As climate changes become a prime challenge to agriculture, reliable crop nutrition is harder to come by. Haifa offers a range of solutions, designed to overcome the challenges, whatever the weather is
Foliar feeding can provide the nutrients required for normal development of crops in cases where absorption of nutrients by the roots system is disturbed.
Learn more here: http://www.haifa-group.com/knowledge_center/fertilization_methods/foliar_nutrition/
ENVIRONMENT~ Renewable Energy Sources and their future prospects.tiwarimanvi3129
This presentation is for us to know that how our Environment need Attention for protection of our natural resources which are depleted day by day that's why we need to take time and shift our attention to renewable energy sources instead of non-renewable sources which are better and Eco-friendly for our environment. these renewable energy sources are so helpful for our planet and for every living organism which depends on environment.
Epcon is One of the World's leading Manufacturing Companies.EpconLP
Epcon is One of the World's leading Manufacturing Companies. With over 4000 installations worldwide, EPCON has been pioneering new techniques since 1977 that have become industry standards now. Founded in 1977, Epcon has grown from a one-man operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment.
Microbial characterisation and identification, and potability of River Kuywa ...Open Access Research Paper
Water contamination is one of the major causes of water borne diseases worldwide. In Kenya, approximately 43% of people lack access to potable water due to human contamination. River Kuywa water is currently experiencing contamination due to human activities. Its water is widely used for domestic, agricultural, industrial and recreational purposes. This study aimed at characterizing bacteria and fungi in river Kuywa water. Water samples were randomly collected from four sites of the river: site A (Matisi), site B (Ngwelo), site C (Nzoia water pump) and site D (Chalicha), during the dry season (January-March 2018) and wet season (April-July 2018) and were transported to Maseno University Microbiology and plant pathology laboratory for analysis. The characterization and identification of bacteria and fungi were carried out using standard microbiological techniques. Nine bacterial genera and three fungi were identified from Kuywa river water. Clostridium spp., Staphylococcus spp., Enterobacter spp., Streptococcus spp., E. coli, Klebsiella spp., Shigella spp., Proteus spp. and Salmonella spp. Fungi were Fusarium oxysporum, Aspergillus flavus complex and Penicillium species. Wet season recorded highest bacterial and fungal counts (6.61-7.66 and 3.83-6.75cfu/ml) respectively. The results indicated that the river Kuywa water is polluted and therefore unsafe for human consumption before treatment. It is therefore recommended that the communities to ensure that they boil water especially for drinking.
Climate Change All over the World .pptxsairaanwer024
Climate change refers to significant and lasting changes in the average weather patterns over periods ranging from decades to millions of years. It encompasses both global warming driven by human emissions of greenhouse gases and the resulting large-scale shifts in weather patterns. While climate change is a natural phenomenon, human activities, particularly since the Industrial Revolution, have accelerated its pace and intensity
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...Joshua Orris
Results of geophysics and pneumatic injection pilot tests during 2003 – 2007 yielded significant positive results for injection delivery design and contaminant mass treatment, resulting in permanent shut-down of an existing groundwater Pump & Treat system.
Accessible source areas were subsequently removed (2011) by soil excavation and treated with the placement of Emulsified Vegetable Oil EVO and zero-valent iron ZVI to accelerate treatment of impacted groundwater in overburden and weathered fractured bedrock. Post pilot test and post remediation groundwater monitoring has included analyses of CVOCs, organic fatty acids, dissolved gases and QuantArray® -Chlor to quantify key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of CVOCs.
In 2022, the first commercial application of MetaArray™ was performed at the site. MetaArray™ utilizes statistical analysis, such as principal component analysis and multivariate analysis to provide evidence that reductive dechlorination is active or even that it is slowing. This creates actionable data allowing users to save money by making important site management decisions earlier.
The results of the MetaArray™ analysis’ support vector machine (SVM) identified groundwater monitoring wells with a 80% confidence that were characterized as either Limited for Reductive Decholorination or had a High Reductive Reduction Dechlorination potential. The results of MetaArray™ will be used to further optimize the site’s post remediation monitoring program for monitored natural attenuation.
Improving the viability of probiotics by encapsulation methods for developmen...Open Access Research Paper
The popularity of functional foods among scientists and common people has been increasing day by day. Awareness and modernization make the consumer think better regarding food and nutrition. Now a day’s individual knows very well about the relation between food consumption and disease prevalence. Humans have a diversity of microbes in the gut that together form the gut microflora. Probiotics are the health-promoting live microbial cells improve host health through gut and brain connection and fighting against harmful bacteria. Bifidobacterium and Lactobacillus are the two bacterial genera which are considered to be probiotic. These good bacteria are facing challenges of viability. There are so many factors such as sensitivity to heat, pH, acidity, osmotic effect, mechanical shear, chemical components, freezing and storage time as well which affects the viability of probiotics in the dairy food matrix as well as in the gut. Multiple efforts have been done in the past and ongoing in present for these beneficial microbial population stability until their destination in the gut. One of a useful technique known as microencapsulation makes the probiotic effective in the diversified conditions and maintain these microbe’s community to the optimum level for achieving targeted benefits. Dairy products are found to be an ideal vehicle for probiotic incorporation. It has been seen that the encapsulated microbial cells show higher viability than the free cells in different processing and storage conditions as well as against bile salts in the gut. They make the food functional when incorporated, without affecting the product sensory characteristics.
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...Joshua Orris
The incorporation of a 3DCSM and completion of HRSC provided a tool for enhanced, data-driven, decisions to support a change in remediation closure strategies. Currently, an approved pilot study has been obtained to shut-down the remediation systems (ISCO, P&T) and conduct a hydraulic study under non-pumping conditions. A separate micro-biological bench scale treatability study was competed that yielded positive results for an emerging innovative technology. As a result, a field pilot study has commenced with results expected in nine-twelve months. With the results of the hydraulic study, field pilot studies and an updated risk assessment leading site monitoring optimization cost lifecycle savings upwards of $15MM towards an alternatively evolved best available technology remediation closure strategy.
Presented by The Global Peatlands Assessment: Mapping, Policy, and Action at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
2. 2
Nutritional recommendations for
TOMATO
in open-field, tunnels and greenhouse
Botanical name: Lycopersicon esculentum Mill.
Synonyms: tomate; pomodoro
Contents:
1. About the crop............................................................................................................................. 3
1.1 Growth patterns..............................................................................................................................................................3
1.2 Growth stages ..................................................................................................................................................................4
1.3 Fruit development .........................................................................................................................................................4
1.4 Crop uses............................................................................................................................................................................5
2. Growing conditions..................................................................................................................... 5
2.1 Growing methods...........................................................................................................................................................5
2.2 Soil type...............................................................................................................................................................................5
2.3 Climate.................................................................................................................................................................................5
2.4 Irrigation .............................................................................................................................................................................5
2.5 Specific sensitivities of the tomato plant.............................................................................................................6
3. Plant nutrition............................................................................................................................. 8
3.1 Dynamics of nutritional requirements..................................................................................................................8
3.2 Main functions of plant nutrients..........................................................................................................................10
3.3 Nutrients deficiency symptoms.............................................................................................................................14
3.4 Leaf analysis standards...............................................................................................................................................22
3.5 Overall nutritional requirements...........................................................................................................................23
4. Fertilization recommendations................................................................................................ 24
4.1 Soil-grown tomatoes...................................................................................................................................................24
4.1.1 Haifa NutriNet™ web software for Nutigation™ programs ...........................................................24
a) Base-dressing.................................................................................................................................................24
b) Nutrigation™ (fertigation)........................................................................................................................25
4.1.2 Poly-Feed® water-soluble NPK fertilizers.............................................................................................27
4.1.3 Multicote® Agri controlled release fertilizer.......................................................................................27
4.1.4 Foliar nutrition...................................................................................................................................................28
4.2 Soilless-grown tomatoes...........................................................................................................................................29
4.2.1 Straight fertilizers.............................................................................................................................................29
4.2.2 Poly-Feed® water soluble NPK fertilizers...............................................................................................34
Appendix I: Nutrigation™ (fertigation)....................................................................................... 35
Appendix II: Plant analysis guide................................................................................................. 36
Appendix III: Haifa specialty fertilizers........................................................................................ 37
Appendix IV: Conversion tables................................................................................................... 40
3. 3
1. About the crop
1.1 Growth patterns
Tomato cultivars may be classified into three groups by their growth patterns, which are
recognized by the arrangement and the frequency of leaves and the inflorescence on the stem.
a) Indeterminate growth – the main and side stemscontinue their growth in a continuous
pattern. The number of leaves between inflorescence is more or less constant, starting from a
specific flowering set (Fig. 1a). Cultivars of indeterminate growth are usually grown as
greenhouse or staked tomatoes.
b) Determinate growth – the main and side stems stop growth after a specific number of
inflorescences that varies with the specific cultivar (Fig. 1b). Processing tomatoes are often
belong to determinate cultivars.
c) Semi-determinate growth - branches stop growth with an inflorescence, but this usually occurs
at an advanced growth stage. Cultivars of this group are usually grown as out-door, non-staked
tomatoes.
Table 1: Number of leaves between inflorescence in different growth patterns
No. of leaves before inflorescence
Indeterminate Determinate
1st
inflorescence 6-14 4-6
2nd
inflorescence 5-7 2-3
3rd
and further inflorescences 3-5 0-1
Figure 1a: Indeterminate type of
tomato growth
Figure 1b: Determinate type of tomato
growth
4. 4
1.2 Growth stages
Growth stages of plants, in very general terms, can be splitinto four periods:
Establishment from planting or seeding during vegetative growth until first flower
appears.
From first flowering to first fruit set
From fruit ripening to first harvest
From first harvest to the end of last harvest.
These growth periods also represent different nutritional needs of the plant (see section 3.1).
The duration of each stage may vary according to growing method, variety characteristics and
climatic conditions (Table 2).
Table 2: A typical example of a growth cycle in central Israel by growth stages
Variety VF121
Growing method Greenhouse
Number days to first flowering 30
Number days to first harvesting 65
Growth stage Stage duration (days) Crop age (days)
Planting 1 1
Vegetative 14 15
First flowering 15 30
First fruit set 10 40
Fruit growth 20 60
Starting harvest - until end of last
harvest
21-145 81-210
1.3 Fruit development
After fruit setting, fruit ripens over a period of 45 - 70 days, depending upon the cultivar, climate
and growth conditions. The fruit continues growing until the stage of green ripeness.
Three fruit developmental stages are noted.
Ripening occurs as the fruit changes color from light green to off-white, pink, red, and finally dark
red or orange. Depending on the distance and time to market, harvest may occur anytime between
the pink to dark red stage, the later stages producing more flavorful fruit.
Table 3: Stages of fruit ripening
Stage Description
Breaker Red stains appear on fruit skin
Pink Tomato turns pink, not yet ready for consumption
Red The tomato is red and completelyripe for consumption
5. 5
1.4 Crop uses
Tomatoes are consumed fresh, and are being processed to pickles,sauce, juice and concentrated
pastes.
2. Growing conditions
2.1 Growing methods
Soil or soilless,protected crop (greenhouse or high plastic tunnel) or open field.
2.2 Soil type
Tomatoes can be grown on soils with a wide range of textures, from light, sandy soils to heavy, clay
soils. Sandy soils are preferable if early harvest is desired. Favorable pH level: 6.0-6.5.At higher or
lower pH levelsmicronutrients become lessavailable for plant uptake.
2.3 Climate
Temperature is the primary factor influencing all stages of development of the plant: vegetative
growth, flowering, fruit setting and fruit ripening. Growth requires temperatures between10°C and
30°C.
Table 4: Temperature requirements during different growth stages:
Growth stage Temperature (0
C)
Minimum Maximum Optimal
Germination 11 34 16-29
Vegetative growth 18 32 21-24
Fruit setting (night / day) 10 / 18 20 / 30 13-18 / 19-24
Formation of lycopene 10 30 21-24
Formation of carotene 10 40 21-32
Light intensity is one of the major factors affecting the amounts of sugars produced in leaves
during the photosynthesis, and this, in turn, affects the number of fruits that the plant can support,
and the total yield.
2.4 Irrigation
Tomato plants are fairly resistant to moderate drought. However, proper management is essential
to assure high yield and quality.
The water requirement of outdoor grown tomatoes varies between 4000 - 6000 m³/ha. In
greenhouses up to 10,000 m3
/ha of water are required. 70% or more of the root system are in the
upper 20 cm of the soil. Therefore, a drip system equipped with a fertigation device isadvisable.
On light soils or when saline water is used, it is necessary to increase water quantities by 20% - 30%.
Water requirements will differ at various growth stages. The requirement increases from
germination until beginning of fruit setting, reaching a peak during fruit development and then
decreasing during ripening.
6. 6
Mild water stress during fruit development and ripening has a positive effect on fruit quality:
firmness, taste and shelf-life quality, but may result in smaller fruit. Late irrigation, close to
harvesting, may impair quality and induce rotting.
Water shortage will lead to reduced growth in general and reduced uptake of calcium in particular.
Calcium deficiency causes Blossom End Rot (BER) (see page 15). On the other hand, excessive
irrigation will create anaerobic soil conditions and consequently cause root death, delayed
flowering and fruit disorders.
Water quality: Tomatoes tolerate brackish water up to conductivity of about 2-3 mmho/cm.
Acidic (low pH) irrigation water is undesirable, as it might lead to the dissolution of toxic elements
in the soil (e.g. Al3+
).
2.5 Specific sensitivities of the tomato plant
Sensitivity to soil-borne diseases
Tomatoes are prone to soil-borne diseases caused by fungi, viruses or bacteria. Therefore it is
recommended to avoid growing tomatoes on plots that used for other sensitive crops (peppers,
eggplants, Irish potatoes, sweet potatoes, cotton, soybeans and others) on recent years. A regime
of 3-year rotation betweensmall grains and tomatoes is recommended.
Sensitivity to salinity
Under saline conditions, sodium cations compete with the potassium cations for the roots uptake
sites, and chloride competesfor the uptake of nitrate-nitrogen and will impede plant development
(Fig.2) and reduce yield.
Figure 2: Inverse relationship between top dry weight and concentration of plant tissue chloride –
the higher the chloride in the plant composition, the lower its dry weight.
8
10
12
14
16
18
20
22
0 20 40 60 80 100
Top dry
weight (g)
Cl (mg/g)
7. 7
Salinitywill resultin a potassium deficiencyin the tomato plants,leading to a low fruit numberper
plant. Corrective measuresundersuch conditions mustinclude the following steps:
Abundant applicationof potassium,as thisspecific cationcan successfullycompete with
the sodium, and considerablyreduce its uptake and the resulting negative effects. (Fig. 3)
Abundant applicationof nitrate, as this specific anionsuccessfullycompeteswith
chloride,and markedly reducesitsuptake and adverse effects.
Also, calcium helpssuppressingthe uptake of sodium. When sufficient calcium is
available,the roots preferuptake of potassium to sodium, and sodium uptake will be
suppressed.
Figure 3: Multi-K® potassium nitrate reverses the adverse effects of salinity in greenhouse tomatoes
(Source: Satti etAl. 1994)
Salination of the nutrient solution markedly decreased dry weight of the plant, fruit size and plant
height. The addition of 4 or 8 mM Multi-K® potassium nitrate to the salinized nutrient solution
markedly increased EC values of the nutrient solution but reversed the said adverse effects caused
by the NaCl. Several parameters were improved even over the control as a direct result of the
treatment with Multi-K®, i.e., fruit size and plant height (Fig. 4).
Figure 4: The effect of salinity and Multi-K® potassium nitrate on vegetative parameters and fruit
size in ‘Pusa ruby’ greenhouse tomatoes.
0
50
100
150
200
250
300
350
400
Montecarlo Pearson
Salinized
Salinized + Multi-K
Yield
(ton/ha)
226
181
278
238
8. 8
Zinc improves toleranceto salt stress
Zinc nutrition in plants seemsto play a major role in the resistance to salt in tomato and other
species.Adequate zinc (Zn) nutritional status improvessalt stress tolerance, possibly, by affecting
the structural integrity and controlling the permeabilityof root cell membranes. Adequate Zn
nutrition reduces excessive uptake of Na by roots in saline conditions.
Sensitivity to calcium deficiency
Tomatoes are highly sensitive to calcium deficiency, which is manifested in the Blossom-End Rot
(BER) symptom on the fruits. Salinity conditions severelyenhance BER intensity. Recently, it was
found that manganese (Mn) serves as antioxidant in tomato fruit, hence its applicationto tomatoes
grown under salinity can alleviate BER symptoms in the fruits. Special care must be taken to avoid
growing conditions, which enhance BER phenomenon.
3. Plant nutrition
3.1 Dynamics of nutritional requirements
Nitrogen and potassium uptake is initiallyslow but rapidly increases during the flowering stages.
Potassium is peaking during fruit development, and nitrogen uptake occurs mainly after the
formation of the first fruit. (Figs. 5 and 6).
Phosphorus (P) and secondary nutrients, Ca and Mg, are required at a relativelyconstant rate,
throughout the life cycle of the tomato plant.
Figure 5: The uptake dynamics of the macro- and the secondary nutrients by a tomato plant
(Source: Huett, 1985)
Uptake rate
(g/plant)
Weeks
0
2
4
6
8
10
12
14
16
0 5 10 15 20
N
P
K
Ca
Mg
Transplanting Vegetative
growth
Flowering &
Fruit-set
Harvest
9. 9
K2O
39%
P2O5
4%
N
25%
MgO
7%
CaO
25%
Figure 6: Daily uptake rates of plant nutrients by processing tomatoes yielding 127 T/ha
(Source: B. Bar-Yosef . Fertilizationunderdripirrigation(
As can be seen in figures 5 and 6, the greatest absorption of nutrients occurs in the first 8 to 14
weeks of growth, and another peak takes place after the first fruit removal. Therefore, the plant
requires high nitrogen application early in the growing season with supplemental applications
after the fruit initiation stage. Improved N use efficiency and greater yields are achieved when N is
appliedunder polyethylene mulches via a drip irrigation system. At least50 % of the total N should
be appliedas nitrate-nitrogen (NO3
-
).
The most prevalent nutrient found in the developed tomato plant and fruit is potassium, followed
by nitrogen (N) and calcium (Ca). (Figures 7 and 8)
Figure 7: Element composition of a tomato plant
(AthertonandRudich, 1986)
0
1
2
3
4
5
6
7
8
9
10
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
N
P2O5
K2O
Uptake rate
(kg/ha/day)
Days after planting
10. 10
K2O
57%
P2O5
5%
N
29%
MgO
3%
CaO
6%
Figure 8: Element composition of a tomato fruit
(AthertonandRudich, 1986)
3.2 Main functions of plant nutrients
Table 5: Summary of main functions of plant nutrients:
Nutrient Functions
Nitrogen (N) Synthesis of proteins (growth and yield).
Phosphorus (P) Cellulardivision and formation of energetic structures.
Potassium (K)
Transport of sugars, stomata control, cofactor of many enzymes, reduces
susceptibilityto plant diseases.
Calcium (Ca) A major building block in cell walls, and reduces susceptibilityto diseases.
Sulphur (S) Synthesis of essential amino acids cystin and methionine.
Magnesium (Mg) Central part of chlorophyll molecule.
Iron (Fe) Chlorophyll synthesis.
Manganese (Mn) Necessary in the photosynthesis process.
Boron (B)
Formation of cell wall. Germination and elongation of pollentube.
Participates in the metabolism and transport of sugars.
Zinc (Zn) Auxins synthesis.
Copper (Cu) Influences in the metabolism of nitrogen and carbohydrates.
Molybdenum (Mo) Component of nitrate-reductase and nitrogenase enzymes.
Nitrogen (N)
The form in which N is supplied isof major importance in producing a successful tomato crop. The
optimal ratio between ammonium and nitrate depends on growth stage and on the pH of the
growing medium.
Plants grown in NH4
+
-supplemented medium have a lower fresh weight and more stress signs than
plants grown on NO3
-
only. By increasing the ammonium nitrate rates, the EC increases and
consequently the yield decreases. However, when doubling the rate of Multi-K® potassium nitrate,
the EC increases without adverse effect on the yield that increases as well (Table 6).
11. 11
Table 6: The effect of nitrogen form (NO3
-
and NH4
+
) on tomato yield- showing the advantages of
nitrate-nitrogen over ammoniacal nitrogen. (source: U. Kafkafi etal. 1971)
NO3
-
: NH4
+
ratio
N g/plant
EC
(mmho/cm)
Yield
(kg/plant)
Multi-K®
potassium nitrate
Ammonium
Nitrate
100 : - 6.3 - 1.7 2.5
70 : 30 6.3 4.4 2.4 1.98
63 : 37 6.3 8.7 2.9 1.20
59 : 41 6.3 13.2 3.5 1.00
100 : - 12.6 - 3.1 3.43
Potassium(K)
Ample amounts of potassium must be suppliedto the crop in order to ensure optimal K levelsin all
major organs, mainly due to the key role K plays in tomatoes:
1. Balancing of negative electrical charges in the plant
As a cation, K+
is THE dominant cation, balancing negative charges of organic and mineral
anions. Therefore, high K concentration is required for this purpose in the cells.
2. Regulating metabolic processes in cells
Main function is in activating enzymes - synthesis of protein, sugar, starch etc. (more than 60
enzymes relyon K). Also, stabilizing the pH in the cell at 7 - 8, passage through membranes,
balancing protons during the photosynthesis process.
3. Regulation of osmotic pressure
Regulating plant’s turgor, notably on guard cellsof the stomata.
In the phloem, K contributes to osmotic pressure and by that transporting metabolic substances
from the “source” to “sink” (from leaves to fruit and to nurture the roots). This K contribution
increases the dry matter and the sugar content in the fruit as well as increasing the turgor of the
fruits and consequently prolonging fruits’ shelf life.
Additionally, potassium has the following important physiological functions:
Improves wilting resistance. (BewleyandWhite ,1926, Adamsetal,1978)
Enhances resistance toward bacterial viral, nematodes and fungal pathogens.
(Potassium andPlantHealth, Perrenoud, 1990).
Reduces the occurrence of coloration disorders and blossom-end rot.
(Winsorand Long, 1968)
Increases solids content in the fruit. (Shafikand Winsor,1964)
Improves taste. (DavisandWinsor, 1967)
12. 12
Figure 9: The effect of K rate on the yield and quality of processing tomatoes
Lycopene is an important constituent in tomatoes, as it enhances the resistance against cancer.
Increasing Multi-K® application rates increases lycopene content of the tomato. The function is
described by an optimum curve (Fig. 10).
Figure 10: The effect of Multi-K® rate on lycopene yield in processing tomatoes
Multi-K® was applied, as a source of potassium, eitherby itself or blended with other N and
P fertilizers, to processing tomatoes. The different application methods, side-dressing dry
fertilizersor combined with fertigation, were compared in a field trial (Table 7). Multi-K®
increased the yield (dry matter) and the brixlevel as can be seen in Figure 11.
70
75
80
85
90
95
100
105
110
Yield (ton/ha) Mean fruit weight (g)
0
160
240
320
kg K2O/ha
0
200
400
600
800
1000
0 5 10 15 20 25 30
y = -1.735x2 + 57.473x + 228.676
R2 = 0.53
Lycopene yield
(mg / plant)
K rate (g / plant)
13. 13
Table 7: Layout of a field trial comparing different Multi-K® application methods and rates,
as a source of K, combined with other N and P fertilizers:
Method of application N-P2O5-K20
kg/ha
Base-dressing and
side-dressing
120-140-260
1) 10 days prior to transplanting:
65% of N & K rates, and the entire P
2) 26 days after transplanting (initial flowering):
10% of N & K rates
3) 51 days after transplanting (initial fruit-set ):
25% of N & K rates as Multi-K®
Base-dressing and
Fertigation I
120-140-260
10 days prior to transplanting:
30% of N, P & K rates, 350 kg/ha of Multi-K® in a
blend: 12-20-27.
During the entire plant development stages, 70%
of N-P-K as Multi-K® + Soluble NPK’s + Multi-P
(phos. acid), 12 weekly applications by fertigation
Base-dressing and
Fertigation II
160-180-360
(34% higher rate)
10 days prior to transplanting:
30% of N, P & K rates as 400 kg/ha, a Multi-K® in a
blend: 12-20-27.
During the entire plant development stages, 70%
of N-P-K as Multi-K® + Soluble NPK’s + Multi-P
(phos. acid), 12 weekly applications by fertigation
Figure 11: The effect of application method and rates of Multi-K® potassium nitrate
on the dry matter yield and brix level of processing tomatoes cv Peto.
3
3.5
4
4.5
5
5.5
6
6.5
7
Dry Matter Brix
Granular
Fertigation I- Multi-K
Fertigation II- Multi-K
Dry matter yield
(ton/ha)
14. 14
Calcium (Ca)
Calcium is an essential ingredient of cell walls and plant structure. It is the key elementresponsible
for the firmness of tomato fruits. It delays senescence in leaves, thereby prolonging leaf's
productive life, and total amount of assimilatesproduced by the plans.
Temporary calcium deficiency islikelyto occur in fruits and especiallyat periods of high growth
rate, leading to the necrosis of the apical end of the fruits and a development of BER syndrome.
3.3 Nutrients deficiency symptoms
Tomatoes are rather sensitive to excessor deficiency of both macro- and micro- nutrients.
Examples of common deficiencies,particularly in soilless culture, other than those of N and P, are: K
deficiency, affecting fruit quality; Ca deficiency, causing blossom-end rot; Mg deficiency, in acid
soils and in the presence of high levelsof K; and deficienciesof B, Fe and Mn in calcareous soils.
Nitrogen
The chlorosis symptoms shown by the leaves on Figure 12 are the direct result of nitrogen
deficiency. A light red cast can also be seen on the veins and petioles.Under nitrogen deficiency,
the older mature leaves gradually change from their normal characteristic green appearance to a
much palergreen. As the deficiency progresses these older leaves become uniformly yellow
(chlorotic). Leaves become yellowish-white under extreme deficiency. The young leaves at the top
of the plant maintain a green but paler color and tend to become smallerin size. Branching is
reduced in nitrogen deficient plants resulting in short, spindly plants. The yellowing in nitrogen
deficiency is uniform over the entire leaf including the veins. As the deficiency progresses, the
older leaves also show more of a tendency to wilt under mild water stress and senesce much
earlierthan usual. Recovery of deficient plants to appliednitrogen is immediate (days) and
spectacular.
Figure 12: Characteristic nitrogen (N) deficiency symptom
15. 15
Phosphorus
The necrotic spots on the leaves on Fig. 13 are a typical symptom of phosphorus (P) deficiency. As a
rule, P deficiency symptoms are not very distinct and thus difficult to identify. A major visual
symptom is that the plants are dwarfed or stunted. Phosphorus deficient plants develop very
slowly in relation to other plants growing under similarenvironmental conditions but with ample
phosphorus supply.
Phosphorus deficient plants are often mistaken for unstressed but much younger plants.
Developing a distinct purpling of the stem, petiole and the lower sides of the leaves. Under severe
deficiency conditions there is also a tendency for leaves to develop a blue-gray luster. In older
leaves under very severe deficiency conditions a brown netted veining of the leaves may develop.
Figure 13: Characteristic phosphorus (P) deficiency symptom
Potassium
The leaves on the right-hand photo show marginal necrosis (tip burn). The leaves on the left-hand
photo show more advanced deficiency status, with necrosis in the interveinal spaces between the
main veins along with interveinal chlorosis. This group of symptoms is very characteristic of K
deficiency symptoms.
Figure 14: Characteristic potassium (K) deficiency symptoms.
16. 16
The onset of potassium deficiency isgenerally characterized by a marginal chlorosis, progressing
into a dry leathery tan scorch on recentlymatured leaves. This is followed by increasing interveinal
scorching and/or necrosis progressing from the leaf edge to the midrib as the stress increases. As
the deficiency progresses, most of the interveinal area becomesnecrotic, the veins remain green
and the leaves tend to curl and crinkle.In contrast to nitrogen deficiency, chlorosis is irreversible in
potassium deficiency. Because potassium is very mobile within the plant, symptoms only develop
on young leaves in the case of extreme deficiency.
Typical potassium (K) deficiency of fruit is characterized by color development disorders, including
greenback, blotch ripening and boxy fruit (Fig. 15).
Figure 15: Characteristic potassium (K) deficiency symptoms on the fruit
Calcium
These calcium-deficientleaves (Fig. 16) show necrosis around the base of the leaves. The
very low mobilityof calcium is a major factor determining the expression of calcium
deficiency symptoms in plants. Classic symptoms of calcium deficiency include blossom-
end rot (BER) burning of the end part of tomato fruits (Fig. 17). The blossom-end area
darkens and flattens out, then appearing leathery and dark brown, and finally it collapses
and secondary pathogens take over the fruit.
Figure 16: Characteristic calcium (Ca) deficiency symptoms on leaves
17. 17
Figure 17: Characteristic calcium (Ca) deficiency symptoms on the fruit
All these symptoms show soft dead necrotic tissue at rapidly growing areas, which is generally
related to poor translocation of calcium to the tissue rather than a low external supply of calcium.
Plants under chronic calcium deficiency have a much greater tendency to wiltthan non-stressed
plants.
Magnesium
Magnesium-deficient tomato leaves (Fig. 18) show advanced interveinal chlorosis, with necrosis
developing in the highly chlorotic tissue. In itsadvanced form, magnesium deficiency may
superficiallyresemble potassium deficiency. In the case of magnesium deficiency the symptoms
generally start with mottled chlorotic areas developing in the interveinal tissue. The interveinal
laminae tissue tends to expand proportionately more than the other leaf tissues, producing a
raised puckered surface, with the top of the puckers progressively going from chlorotic to necrotic
tissue.
Figure 18: Characteristic magnesium (Mg) deficiency
18. 18
Sulfur
This leaf (Fig. 19) shows a general overall chlorosis while still retaining some green color. The veins
and petiolesexhibita very distinct reddish color. The visual symptoms of sulfur deficiency are very
similarto the chlorosis found in nitrogen deficiency. However, in sulfur deficiency the yellowing is
much more uniform over the entire plant including young leaves. The reddish color often found on
the underside of the leaves and the petioleshas a more pinkish tone and is much less vivid than
that found in nitrogen deficiency. With advanced sulfur deficiency brown lesions and/or necrotic
spots often develop along the petiole,and the leaves tend to become more erectand often twisted
and brittle.
Figure 19: Characteristic sulfur (S) deficiency
Manganese
These leaves (Fig. 20) show a light interveinal chlorosis developed under a limitedsupply of Mn.
The early stages of the chlorosis induced by manganese deficiency are somewhat similarto iron
deficiency. They begin with a light chlorosis of the young leaves and netted veins of the mature
leaves especiallywhen they are viewed through transmitted light. As the stress increases, the
leaves take on a gray metallic sheen and develop dark freckled and necrotic areas along the veins.
A purplishluster may also develop on the upper surface of the leaves.
Figure 20: Characteristic manganese (Mn) deficiency
19. 19
Molybdenum
These leaves (Fig. 21) show some mottled spotting along with some interveinal chlorosis. An early
symptom for molybdenum deficiency is a general overall chlorosis, similarto the symptom for
nitrogen deficiency but generally without the reddish coloration on the undersides of the leaves.
This results from the requirement for molybdenum in the reduction of nitrate, which needs to be
reduced prior to its assimilation by the plant. Thus, the initial symptoms of molybdenum deficiency
are in fact those of nitrogen deficiency. However, molybdenum has also other metabolic functions
within the plant, and hence there are deficiency symptoms even when reduced nitrogen is
available. At high concentrations, molybdenum has a very distinctive toxicity symptom in that the
leaves turn a very brilliantorange.
Figure 21: Characteristic molybdenum (Mo) deficiency
Zinc
This leaf (Fig. 22) shows an advanced case of interveinal necrosis. In the early stages of zinc
deficiency the younger leaves become yellowand pitting develops in the interveinal upper
surfaces of the mature leaves. As the deficiency progresses these symptoms develop into an
intense interveinal necrosis but the main veins remain green, as in the symptoms of recovering iron
deficiency.
Figure 22: Characteristic zinc (Zn) deficiency symptoms.
20. 20
Boron
This boron-deficient leaf (Fig. 23) shows a light general chlorosis. Boron is an essential plant
nutrient, however, when exceeding the required level,it may be toxic. Boron is poorly transported
in the phloem. Boron deficiency symptoms generally appear in younger plants at the propagation
stage. Slight interveinal chlorosis in older leaves followed by yellow to orange tinting in middle and
older leaves. Leaves and stems are brittle and corky, split and swollen miss-shaped fruit (Fig. 24).
Figure 23: Characteristic boron (B) deficiency symptoms on leaves
Figure 24: Characteristic boron (B) deficiency symptoms on fruits
Copper
These copper-deficientleaves (Fig. 25) are curled, and their petiolesbend downward. Copper
deficiency may be expressed as a light overall chlorosis along with the permanent loss of turgor in
the young leaves. Recently matured leaves show netted, green veining with areas bleached to a
whitish gray. Some leaves develop sunken necrotic spots and have a tendency to bend downward.
21. 21
Figure 25: Characteristic copper (Cu) deficiency symptoms.
Iron
These iron-deficient leaves (Fig. 26) show intense chlorosis at the base of the leaves with some
green netting. The most common symptom for iron deficiency starts out as an interveinal chlorosis
of the youngest leaves, evolves into an overall chlorosis, and ends as a totally bleached leaf. The
bleached areas often develop necrotic spots. Up until the time the leaves become almost
completelywhite they will recover upon application of iron. In the recovery phase the veins are the
first to recover as indicated by their bright green color. This distinct venial re-greening observed
during iron recovery is probably the most recognizable symptom in all of classical plant nutrition.
Because iron has a low mobility, iron deficiency symptoms appear first on the youngest leaves. Iron
deficiency is strongly associated with calcareous soils and anaerobic conditions, and it is often
induced by an excessof heavy metals.
Figure 26: Characteristic iron (Fe) deficiency symptoms
22. 22
3.4 Leaf analysis standards
In order to verify the correct mineral nutrition during crop development, leaf samples should be
taken at regular intervals, beginning when the 3rd
cluster flowers begin to set. Sample the whole
leaf with petiole,choosing the newest fully expanded leaf below the last open flower cluster.
Sufficiency leaf analysis ranges for newest fully-expanded, dried whole leaves are:
Table 8: Nutrients contents in tomato plant leaves
A. Macro and secondarynutrients
Nutrient
Conc. in leaves (%)
Before fruiting During fruiting
N 4.0-5.0 3.5-4.0
P 0.5-0.8 0.4-0.6
K 3.5-4.5 2.8-4.0
Ca 0.9-1.8 1.0-2.0
Mg 0.5-0.8 0.4-1.0
S 0.4-0.8 0.4-0.8
B. Micronutrients
Nutrient
Conc. in leaves (ppm)
Before fruiting During fruiting
Fe 50-200 50-200
Zn 25-60 25-60
Mn 50-125 50-125
Cu 8-20 8-20
B 35-60 35-60
Mo 1-5 1-5
Toxic levels for B, Mn, andZn arereportedas 150,500, and300 ppm,respectively.
24. 24
4. Fertilization recommendations
The recommendations appearing in this document should be regarded as a general guide only.
The exact fertilization program should be determined according to the specific crop needs, soil and
water conditions, cultivar, and the grower’s experience.For detailed recommendations, consult a
local Haifa representative.
Disclaimer:Any use of the information given here is made at the reader’s sole risk. Haifa Chemicals
Ltd. provides no warranty whatsoever for "Error Free" data, nor does itwarrants the results that
may be obtained from use of the provided data, or as to the accuracy, reliabilityor content of any
information provided here.
In no event will Haifa Chemicals Ltd. or its employeesbe liable for any damage or punitive
damages arising out of the use of or inabilityto use the data included.
4.1 Soil-grown tomatoes
4.1.1 HaifaNutriNet™ web softwarefor Nutigation™ programs
Haifa fertilization recommendations are available in the online Knowledge Center on our website,
www.haifa-group.com. Use the NutriNet™ web software, accessible through our website or directly
at www.haifa-nutrinet.com to assist you in working out the recommended fertilizerrates at
different growth stages according to the expected yieldunder your growing conditions.
The following is an example of recommendations of open field grown tomatoes on sandy loam
soil, as determined by NutriNet™, with the assumption of splitscheduled fertilization into:
a) Base-dressing (pre-plant) fertilizers followed by:
b) Nutrigation™ (fertigation) at different growth stages, on sandy-clay soil when the expectedyield
is 120 ton/Ha:
a) Base-dressing:
25. 25
b) Nutrigation™ (fertigation):
Total amount of fertigated fertilizers
Table 10: The total contribution of plant nutrients from each fertilizeras calculated by NutriNet™:
Fertilizer kg/ha N P2O5 K2O CaO MgO
Ammonium nitrate 34-0-0 374.4 123.6
Haifa MAP 12-61-0 139.3 16.7 85
Multi-K® 13-0-46 1080.4 140.5 497
Calcium nitrate (26% CaO) 119.2 17.9 31
Magnesium sulfate (16% MgO) 112.5 18
Total 1826 311 85 497 31 18
Table 11: Recommended nutrient rates per ha perday and per growth stage as calculated by
NutriNet™:
Phase Days from sowing /
planting
kg/ha/day kg/ha/phase
N P2O5 K2O CaO MgO N P2O5 K2O CaO MgO
Planting 1 1 0 1 0 0 1 0 1 0 0
Vegetative 2-15 0.57 0.14 0.93 0.07 0 8 2 13 1 0
Flowering 16-30 0.6 0.13 0.93 0.07 0.07 9 2 14 1 1
Fruit set 31-40 0.6 0.2 0.9 0.1 0 6 2 9 1 0
Fruit growth 41-60 1.2 0.3 1.9 0.1 0.05 24 6 38 2 1
1st
harvest 61-65 1.2 0.4 1.8 0.2 0 6 2 9 1 0
Harvest 66-120 2.36 0.65 3.78 0.24 0.15 130 36 208 13 8
Harvest 121-170 1.78 0.48 2.84 0.18 0.1 89 24 142 9 5
Last harvest 171-210 1.78 0.48 2.85 0.18 0.1 71 19 114 7 4
Total 344 93 548 35 19
26. 26
Table 12: Recommended fertilizersrates pergrowth stage
Phase Days from
sowing /
planting
kg/ha/phase
Ammonium
nitrate
34-0-0
Haifa MAP*
12-61-0
Multi-K®
*
13-0-46
Mullti-
Cal®*
15.5-0-0
+26CaO
Magnesium
sulfate
(16% MgO)
Planting 1 3 0 2 0 0
Vegetative 2-15 24 3 28 4 0
Flowering 16-30 26 3 30 4 6
Fruit set 31-40 18 3 20 4 0
Fruit growth 41-60 71 10 83 8 6
1st
harvest 61-65 18 3 20 4 0
Harvest 66-120 382 59 452 50 50
Harvest 121-170 262 39 309 35 31
Last harvest 171-210 209 31 248 27 25
Total 374 139 1080 119 113
*
Multi-K® =Potassium nitrate
Haifa MAP = Mono-ammonium phosphate
Haifa Cal = Calcium nitrate
Fertilization and fertigation rates may vary according to cultivar, growing method, climatic
conditions, growth stages and expected yield. By using Haifa NutriNet™ (www.haifa-nutrinet.com)
program on-line, you may obtain Haifa’s recommendations most suitable to your growing
conditions by selectingthe expectedyield, growing method and growth stages.
27. 27
4.1.2 Poly-Feed®water-solubleNPKfertilizers
Table 13: Fertilization program for processing tomatoes. Expected yield: 50 ton/ha
Growth stage Days Poly-Feed®
formula
Kg/ha/day
Planting to flowering 25 20-20-20 8
Flowering to fruit set 30 14-7-21+ 2MgO 15
Fruit set to harvest 40 14-7-28+ 2MgO 18
Foliar Feeding: To boost growth apply Poly-Feed® Foliar Vegetative Booster every 15 days.
Volume: 200 L/ha. Concentration: 0.5% - 1%.
Table 14: Fertilization program for tomatoes in tunnels. Expected yield: 150 ton/ha
Growth stage Days Poly-Feed®
formula
Kg/ha/day
Planting to flowering 25 20-20-20 8
Flowering to fruit set 20 14-7-21+ 2MgO 15
Fruit set to 1st
harvest 35 14-7-28+ 2MgO 17
1st
Harvest to Last harvest 100 14-7-28+ 2MgO 18
Table 15: Fertilization program for tomatoes in greenhouse. Expected yield: 160 ton/ha
Growth stage Days Poly-Feed®
formula
Kg/ha/day Total kg/ha
Planting to flowering 8 15-30-15 8 64
Flowering to Fruit set 25 19-19-19 13 325
Fruit set to 1st
Harvest 30 18-9-27 17 510
1st
Harvest to Last Harvest 110 16-8-32 17 1870
To cure and prevent magnesium deficiencies,apply Magnisal® by Nutrigation™ or foliar spray.
To cure and prevent calcium deficiencies,apply Haifa Cal by Nutrigation™ or foliar spray.
4.1.3 Multicote®Agricontrolledreleasefertilizer
An N:P2O:K2O ratio of 2:1:3* is recommended, as pre-plantapplication. This
application will take care of the nutritional requirement of the plot for the entire
growth season.
Multicote® Agri granules should be incorporated into the soil, 10cm deep and
10cm away from the planting row.
Consult a local Haifa representative for detailed explanations and instructions.
Table 16: Multicote® Agri application recommendations tomato in greenhouse
kg/ha Analysis* Longevity
2,500 - 4,000 17-9-27 8 months
* Theactualchoice of formula shouldtakeinto account soiltypeandaddition ofcompost
andany other factor that may affect thenutritionalstatusofthesoil.
28. 28
4.1.4 Foliarnutrition
Foliar feeding is a fast and highly effective method of supplementing and enriching plant nutrients
when needed. Foliar application of Haifa water soluble fertilizersprovides needed plant nutrients
for normal development of crops when absorption of nutrients from the soil is disturbed, precision-
timed foliar sprays are also a fast-acting and effective method for treating nutrient deficiencies.
Foliar applicationof the correct nutrients in relatively low concentrations at critical stages in crop
development contributes significantly to higher yields and improved quality.
Determine safe foliar applied rate:
To verify the safe rate under local conditions, it is advisable to spray recommended rate on a few
plants. After 3-4 days check the tested plants for scorching symptoms.
Preparationof tank-mix:
Dissolve Haifa water-soluble fertilizesin about half of the tank volume, and add to the spray tank.
When applying together with crop-protection agents, addition of wetting agents is not necessary.
To ensure compatibilityof tank-mix components, a small-scale testshould be performed prior to
actual application.
Table 17: Haifa water-soluble fertilizersfor foliar application:
Fertilizer Curing Treatment Recommended concentration
Haifa Bonus Potassium deficiency 1 % - 2 %
Haifa MAP Phosphorus deficiency 0.5 % - 1 %
Haifa MKP Phosphorus and potassium
deficiency
0.5 % - 1 %
Magnisal® Magnesium deficiency 0.5 % - 0.75 %
Poly-Feed® N-P-K and micronutrients deficiency 0.75 % - 1.5 %
29. 29
4.2 Soilless-grown tomatoes
4.2.1 Straight fertilizers
There are different growth media with different physical and chemical characteristics. The
following are general fertilization recommendations for all soillessgrowth media.
Fertilizer stock solution:Once dissolved, not all fertilizersare inter-compatible with each other.
Therefore, they have to be splitinto two fertilizertanks: A and B, according to their compatibilities.
Fertilizerscontaining phosphorus (P) or sulfur (S) should be dissolved in Tank A only, while
fertilizerscontaining calcium (Ca) or magnesium (Mg) should be dissolved in Tank B. Chelated
micronutrients should be dissolved in Tank B, as well.
The concentrationof the fertilizers stocksolution depends on:
1. The ambient temperature (higher ambienttemperature enables higher concentration)
2. The injection rate - how many litersof the fertilizer solution will be injectedinto each cubic
meter(1000 liters) of the irrigated water
Dividing the injection capacity by one cubic meter should be the concentration of the fertilizer
solution. If, for example,the injectordelivers 5 L into each cubic meterof the irrigated water,
multiplythe amount of fertilizer dissolved in the tank by 200 (1000 L / 5 L = 200).
Examples of fertigationregimes in soilless grown tomatoes:
The following example was prepared to fit Dutch conditions (low transpiration and low water EC).
Considerable and proportional reduction in the concentration of the macronutrients should be
required to offset for lower quality water prevailing in other conditions.
Table 18: Nutrition database for tomatoes. Growth medium: rockwool.
Parameter Nutrient solution (ppm)
EC (mS/cm) 2.6
N- NH4 16.6
N- NO3 223.9
P 46.5
H2PO4 145.5
K 371.5
Ca 216.5
Mg 58.3
S, total 140.9
SO4 422.8
30. 30
Table 19: Recommended water-soluble fertilizers and their rates, to prepare the above
recommended solution:
Fertilizers g/m3 Plant nutrients – g/m3
solution
NO3 NH4 P* K* Ca* Mg* S*
Ammonium
nitrate 50 8.5 8.5
Multi-K® 400 52 152
Haifa SOP 400 168 60
Haifa Cal 1150 178.2 218.5
MgSO4 600 60 78
Haifa MKP 0 45.4 56
Total 238.7 8.5 45.4 376 218.5 60 138
An Italian systemfor fertigation management in close-loop soilless culture of tomato are:
NO3 NH4 P* K* Ca* Mg* S*
200 14 30 310 160 35 80
Table 20: Recommended water-soluble fertilizersand their rates to prepare a fertilizersolution for
the above Italian system:
Fertilizers g/m3 Plant nutrients – g/m3
solution
NO3 NH4 P* K* Ca* Mg* S*
Ammonium
nitrate 0
Multi-K® 600 78 228
Haifa SOP 200 84 30
Haifa Cal 850 131.7 161.5
Magnisal® 0
MgSO4 350 35 45
Haifa MAP 100 12 27
Haifa MKP 0
Total 209.7 12 27 312 161.5 35 75.5
EC valueshouldbemaintainedat ~ 2.07 mS/cm
* conversion factors: Px 2.29 = P2O5 ; K x 1.20 = K2O ; Ca x 1.40 = CaO ; Mg x 1.66 = MgO ;
S x 3.00 = SO4
31. 31
Table 21: Fertilizerrecommendations for hydroponic (perlite,rockwool, and NFT) tomatoes in
Florida (http://edis.ifas.ufl.edu/CV216):
Nutrient
Growth stage
1 2 3 4 5
Transplant to
1st
cluster
1st
cluster to
2nd
cluster
2nd
cluster to
3rd
cluster
3rd
cluster to
5th
cluster
5th
cluster to
termination
Final delivered nutrient solution concentration (ppm)**
N 70 80 100 120 150
P 50 50 50 50 50
K 120 120 150 150 200
Ca* 150 150 150 150 150
Mg* 40 40 40 50 50
S* 50 50 50 60 60
* Ca,Mg, andS concentrations may varydepending on Ca and Mg concentration in water and amount
of sulfuricacid usedfor acidification.
** 1ppm = 1mg/liter
Table 22: Recommended water-soluble fertilizersand their rates to prepare a fertilizersolution
from transplant to various growth stages as indicated in Table 21:
A. From transplant to 1st
cluster
Fertilizers g/m3
NO3 NH4 P* K* Ca* Mg* S*
Haifa SOP 150 63 23
Haifa Cal 500 77.5 95
MgSO4 400 40 52
Haifa MKP 200 45.4 56
Total 77.5 0 45.4 119 95 40 75
B. From 1st
to 2nd
cluster
Fertilizers g/m3
NO3 NH4 P* K* Ca* Mg* S*
Haifa SOP 150 19.5 57
Haifa Cal 500 77.5 95
MgSO4 400 40 52
Haifa MKP 250 56.75 70
Total 97 0 56.75 127 95 40 52
* conversion factors: Px 2.29 = P2O5 ; K x 1.20 = K2O ; Ca x 1.40 = CaO ; Mg x 1.66 = MgO ;
S x 3.00 = SO4
32. 32
C. From 2nd
to 3rd
cluster
Fertilizers g/m3
NO3 NH4 P* K* Ca* Mg* S*
Multi-K® 400 52 152
Haifa Cal 500 77.5 95
MgSO4 400 40 52
Haifa MAP 180 21.6 48.6
Total 129.5 21.6 48.6 152 95 40 52
D. From 3rd
to 5th
cluster
Fertilizers g/m3
NO3 NH4 P* K* Ca* Mg* S*
Multi-K® 400 52 152
Haifa Cal 500 77.5 95
MgSO4 500 50 65
Haifa MAP 180 21.6 48.6
Total 129.5 21.6 48.6 152 95 50 65
E. From 5th
cluster to Termination
Fertilizers g/m3
NO3 NH4 P* K* Ca* Mg* S*
Multi-K® 530 68.9 201.4
Haifa Cal 500 77.5 95
MgSO4 500 50 65
Haifa MAP 180 21.6 48.6
Total 146.4 21.6 48.6 201.4 95 50 65
Table 23: Recommendations for greenhouse soilless grown tomatoes, in Israel, according to the
growing stages (NH4/NO3 ratio=0.1- 0.2):
Physiological stage
Concentration in the irrigation solution (dripper) (ppm)
N P* K* Ca* Mg*
Planting and
establishment
120-150 40-50 180-220 100-120 40-50
Flowering 150-180 40-50 220-270 100-120 40-50
Ripening and harvest 180-200 40-50 270-300 100-120 50-80
* conversion factors: Px 2.29 = P2O5 ; K x 1.20 = K2O ; Ca x 1.40 = CaO ; Mg x 1.66 = MgO ;
S x 3.00 = SO4
34. 34
4.2.2 Poly-Feed®watersolubleNPKfertilizers
Table 25: Recommended composition of nutritional solution for soilless-grown tomatoes
A. In temperate or cold climate with low sun radiation and soft water (e.g. North and North-East
Europe, North France, UK, Japan, Korea)
Concentration in irrigation water (ppm) Recommended
Poly-Feed® formula
Conc.
(kg/m3
)N P K Ca Mg
190 50 310 150 45 14-10-34+ME 1.1
Someacid andHaifa Cal calcium nitrateshouldbeaddedto adjust thepHandto complete calcium
requirements.
B. In hot climate with high sun radiation and hard water (e.g. Middle East, Mediterranean countries)
Concentration in irrigation water (ppm) Recommended
Poly-Feed® formula
Conc.
(kg/m3
)N P K Ca Mg
170 45 225 105 40 17-10-27 1.0
Someacid andHaifa Cal calcium nitrateshouldbeaddedto adjust thepHandto complete calcium
requirements.
35. 35
Appendix I: Nutrigation™ (fertigation)
Balanced irrigation & fertilization regime ensures optimal nutrition throughout the growth season.
Application of top-quality water-soluble fertilizers through the irrigation system isthe optimal
method for providing balanced plant nutrition throughout the growth season.
A balanced Nutrigation™ regime ensures that essential nutrients are placed preciselyat the site of
intensive root activity, and are available in exactly the right quantity when plants need them.
Evaporation considerations
The amount of water required per application can be determined by the coefficient of transpiration
and the evaporation data from a class A pan. For example, average evaporation readings in the
central part of Israel, expressed in mm/day, are given in table 26:
Table 26: Evaporation rates from Class A Pan in central Israel (mm/day)
Apr May Jun Jul Aug Sep Oct Nov
4.4 5.9 6.8 6.9 6.6 5.7 4.3 3.0
Plants, usually, are less influenced than an exposed pan to the prevailing climatic conditions, such
as: sun, wind, humidity, etc., and will transpire less water. As an example, the percentage of
transpiration by tomatoes, known as transpiration coefficient, is illustrated in Table 27. The
coefficient increases according to the growth stage of the plant as the growing season evolves.
Table 27: Transpiration coefficients in tomatoes, according to the growth stages.
Growth stage Planting –Blooming Blooming – Fruit set Fruit set - Harvesting
Transpiration
coefficient
0.4 0.6 0.8
The following example of the amount of irrigation water, calculated from data collected on the
losses of the evaporation A pan and multiplied by the transpiration coefficient is shown in Table 28.
Table 28: Example of water consumption of outdoor grown tomatoes, in Israel.
Growth
stage
Month Evaporation
rates,
(mm/day)
Transpiration
coefficient
Water
losses*
(mm/day)
Required
amount of
irrigation water
(m3
/ha/day)
Blooming May 5.9 0.4 2.36 23.6
Fruit set June 6.8 0.6 4.08 40.8
Harvesting July 6.9 0.8 5.52 55.2
* - via transpiration.
36. 36
If the irrigation cycle is not daily, then the daily amount has to be multiplied by the number of days
between irrigation cycles as shown in Table 29.
Table 29: Example of required amount of water for out-door grown tomatoes.
Growth stage Month Amount of required
irrigation per day
(m3
/ha)
Irrigation cycle
(days)
Amount of water /
irrigation per cycle
(m3
/ha)
Blooming May 23.6 3 71
Fruit set June 40.8 5 204
Harvesting July 55.2 4 222
Appendix II: Plant analysis guide
Nutrient Sufficiency Ranges
(source: A & L, AgronomyHandbook, Ankerman& Large,Eds.)
N P K Mg Ca S Na B Zn Mn Fe Cu Al
% ppm
From 3.00 0.30 2.50 0.50 2.00 0.50 0.01 40 35 100 100 8 20
To 6.00 0.80 5.00 1.00 6.00 0.90 0.01 60 50 200 200 20 200
Plant sampling
Growth stage Plant part to sample No. of plants or
leaves to sample
Open-field
tomatoes
Prior to or during
early bloom stage
3rd
or 4th
leaf from growing tip 20-25
Greenhous
e tomatoes
Prior to or during
fruit-set
Young plants: leaves adjacent
to 2nd
or 3rd
cluster
20-25
Older plants: leaves from 4th
to
6th
clusters
20-25
37. 37
Appendix III: Haifa specialty fertilizers
Pioneering Solutions
Haifa develops and produces PotassiumNitrate products, Soluble Fertilizers for Nutrigation™
and foliar sprays, and Controlled-Release Fertilizers. Haifa’s Agriculture Solutions maximize yields
from given inputs of land, water and plant nutrients for diverse farming practices.With innovative
plant nutrition schemesand highly efficient application methods, Haifa’s solutions provide
balanced plant nutrition at precise dosing, composition and placing. This ultimately delivers
maximum efficiency, optimal plant development and minimized losses to the environment.
Potassium Nitrate
Haifa's Potassium Nitrate products represent a unique source of potassium due to their nutritional
value and contribution to plant's health and yields. Potassium Nitrate has distinctive chemical and
physical propertiesthat are beneficial to the environment. Haifa offers a wide range of potassium
nitrate products for Nutrigation™, foliar sprays, side-dressing and controlled-release fertilization.
Haifa's potassium nitrate products are marketed under the Multi-K® brand.
Multi-K® Products
Pure Multi-K®
Multi-K® Classic Crystalline potassium nitrate (13-0-46)
Multi-K® Prills Potassium nitrate prills(13-0-46)
Special Grades
Multi-K® GG Greenhouse-grade potassium nitrate (13.5-0-46.2)
Multi-K® pHast Low-pH potassium nitrate (13.5-0-46.2)
Multi-K® Top Hydroponics-grade potassium nitrate (13.8-0-46.5)
Enriched Products
Multi-npK® Enriched with phosphate; crystalline or prills
Multi-K® Mg Enriched with magnesium; crystalline or prills
Multi-K® Zn Enriched with zinc; crystalline
Multi-K® S Enriched with sulfate; crystalline
Multi-K® B Enriched with boron; crystalline or prills
Multi-K® ME Enriched with magnesium and micronutrients; crystalline
38. 38
Nutrigation™
Nutrigation™ (fertigation) deliverspure plant nutrients through the irrigation system, supplying
essential nutrients preciselyto the area of most intensive root activity. Haifa’s well-balanced
Nutrigation™ program provides the plant with their exact needs accordingly with seasonal
changes. Decades of experience in production and application of specialtyfertilizersfor
Nutrigation™ have made Haifa a leading company in this field. Haifa keeps constantly up to date
with contemporary scientific and agricultural research, in order to continuously broaden its
product line to better meetthe requirements of crops and cropping environments.
Haifa offers a wide range of water-soluble fertilizers for Nutrigation™. All products contain only
pure plant nutrients and are free of sodium and chloride
Multi-K® Comprehensive range of plain and enriched potassium nitrate products
Poly-Feed® Soluble NPK fertilizersenriched with secondary and micro-nutrients
Haifa MAP Mono-ammonium phosphate
Haifa MKP Mono-potassium phosphate
Haifa Cal Calcium nitrate
Magnisal® Our original magnesium nitrate fertilizer
Haifa Micro Chelated micronutrients
Haifa VitaPhos-K™ Precipitation-proof poly-phosphate for soillessNutrigation™
Haifa ProteK Systemic PK fertilizer
Foliar Feeding
Foliar Feeding provides fast, on-the-spot supplementarynutrition to ensure high, top quality yields
and is an ideal feeding method under certain growth conditions in which absorption of nutrients
from the soil is inefficient, or for use on short–term crops. Precision-timedfoliar sprays are also a
fast-acting and effective method for treating nutrient deficiencies. Foliar application of the correct
nutrients in relatively low concentrations at critical stages in crop development contributes
significantly to higher yields and improved quality. Haifa offers a selectionof premium fertilizers for
foliar application. Haifa offers a selection of fertilizersfor foliar application:
Haifa Bonus High-K foliar formulas enriched with special adjuvants for better absorption and
prolonged action
Poly-Feed® Foliar NPK formulas enriched with micronutrients speciallydesigned to enhance the
crop performance during specific growth stages
Magnisal®, Haifa MAP, Haifa MKP, Haifa Cal and Haifa Micro are also suitable for foliar
application.
39. 39
Controlled Release Nutrition
Multicote®, Haifa's range of Controlled Release Fertilizers includes products for agriculture,
horticulture, ornamentals and turf. Multicote® products provide plants with balanced nutrition
according to their growth needs throughout the growth cycle. Multicote® products enhance plant
growth, improve nutrients use efficiency, save on labor and minimize environmental impact.
Single, pre-plantapplication controlled-release fertilizercan take care of the crop’s nutritional
requirements throughout the growth season. Controlled release fertilizers are designed to feed
plants continuously, with maximal efficiency of nutrients uptake. Controlled release fertilizers save
labor and application costs. Their application is independent of the irrigation system, and does not
require sophisticated equipment.
Taking advantage of MulticoTech™ polymer coating technology, Haifa produces Multicote® line of
controlled release fertilizers.
Multicote®Products
Multicote®for nurseries and ornamentals; NPK formulae with release longevities of 4, 6, 8, 12 and
16 months
Multicote®Agri / Multigro® for agriculture and horticulture
CoteN™ controlled-release urea for arable crops
Multicote®Turf / Multigreen® for golf courses, sports fields, municipalsand domestic lawns
40. 40
Appendix IV: Conversion tables
From To Multiply by From To Multiply by
P P2O5 2.29 P2O5 P 0.44
P PO4 3.06 PO4 P 0.32
H3PO4 H2PO4 0.98 H2PO4 H3PO4 1.38
K K2O 1.20 K2O K 0.83
Ca CaO 1.40 CaO Ca 0.71
Mg MgO 1.66 MgO Mg 0.60
S SO3 2.50 SO3 S 0.40
S SO4 3.00 SO4 S 0.33
N NH4 1.28 NH4 N 0.82
N NO3 4.43 NO3 N 0.22
1 meq Correspondent
element (mg)
1 mmol Correspondent
element (mg)
Weight of ion
NH4
+
14 mg N NH4
+
14 mg N 18 mg NH4
+
NO3
-
14 mg N NO3
-
14 mg N 62 mg NO3
-
H2PO4
-
31 mg P H2PO4
-
31 mg P 71 mg P2O5
HPO4
2-
31 mg P HPO4
2-
31 mg P 35,5 mg P2O5
HPO4
2-
15.5 mg P K+
39 mg K 47 mg K2O
K+
39 mg K Ca2+
40 mg Ca 28 mg CaO
Ca2+
20 mg Ca Mg2+
24 mg Mg 20 mg MgO
Mg2+
12 mg Mg SO4
2-
32 mg S 48 mg SO4
SO4
2-
16 mg S Na+
23 mg Na -
Na+
23 mg Na Cl-
35.5 mg Cl -
From To Multiply by From To Multiply by
Acre Hectare 0.405 Hectare Acre 2.471
Kilogram Lbs 2.205 Lbs Kilogram 0.453
Gram Ounces 0.035 Ounces Gram 28.35
Short Ton MT 0.907 MT Short Ton 1.1
Gallon (US) Liters 3.785 Liters Gallon (US) 0.26
Kg/Ha Lbs/acre 0.892 Lbs/acre Kg/Ha 1.12
MT/Ha Lbs/acre 892 Lbs/acre MT/Ha 0.001