Theory of elasticity - Timoshenko
•
24 likes•11,288 views
The document discusses the history and importance of chocolate in human civilization. It notes that chocolate originated in Mesoamerica over 3000 years ago and was prized by the Aztecs and Mayans for its taste. Cocoa beans were used as currency and their cultivation was tightly regulated. The Spanish brought cocoa to Europe in the 16th century, starting its global spread and the development of the chocolate industry.
Report
Share
Report
Share
Download to read offline
Recommended
A study on _ buckling
The document discusses buckling and its theories. It defines buckling as the failure of a slender structural member subjected to compressive loads. It provides examples of structures that can experience buckling. It explains Euler's theory of buckling which derived an equation for the critical buckling load of a long column based on its bending stress. The assumptions of Euler's theory are listed. Four cases of long column buckling based on end conditions are examined: both ends pinned, both ends fixed, one end fixed and one end pinned, one end fixed and one end free. Effective lengths are defined for each case and the corresponding critical buckling loads given. Limitations of Euler's theory are noted. Rankine's empirical formula for calculating ultimate
Fem class notes
This document contains lecture notes on the finite element method from Dr. Atteshamuddin S. Sayyad. It covers the fundamentals of elasticity theory including assumptions, basic terms like stresses and strains, equilibrium equations, and strain-displacement relationships. The notes provide definitions and equations for normal and shear stresses and strains, the state of stress and strain at a point, and developing the governing equations of equilibrium in three dimensions from an infinitesimal element.
Buckling of Columns
Columns are the most important structural elements used in buildings. The material given here helps to understand the basics
Introduction to Theory of elasticity and plasticity Att 6521
This document provides an introduction and overview of a course on the theory of elasticity and plasticity. It discusses key topics that will be covered, including stress, strain, material behavior, elasticity problem formulation, energy principles, finite element methods, and plasticity. It outlines the organization of the course, including lecture materials made available online, instructors, office hours, grading based on homework, exams, and participation. Mathematical preliminaries are also introduced, including definitions and properties of scalars, vectors, tensors, and transformations between coordinate systems.
Bending stresses in beams
This document discusses bending stresses in beams. It defines simple or pure bending as when a beam experiences zero shear force and constant bending moment over a length. For simple bending, the stress distribution can be calculated using beam theory. The key points are:
- Bending stresses are introduced due to bending moments and are highest at the extreme fibers furthest from the neutral axis.
- The neutral axis experiences no bending stress and its location is defined by the centroidal axis of the beam cross-section.
- Bending stress is directly proportional to the distance from the neutral axis. The stress distribution follows σ = My/I, where M is the bending moment, y is the distance from neutral axis, and I is
Principle of Superposition
Text book for the mechanics of materials
[Part VIII] Principle of Superposition (in English)
note: Your feedback is welcome!
Torsion of circular shafts
This document discusses mechanics of solid members subjected to torsional loads. It describes how torsion works, generating shear stresses in circular shafts. The key equations for relating applied torque (T) to shear stress (τ) and angle of twist (θ) are developed. For a solid circular shaft under torque T, the maximum shear stress τmax occurs at the outer surface and is equal to T/J, where J is the polar moment of inertia of the cross section. Power transmitted by a shaft is also defined as 2πNT, where N is rotational speed in revolutions per minute. Shear stress distribution and failure modes under yielding are also briefly covered.
Shear force and bending moment
The document discusses beams, which are horizontal structural members that support applied loads. It defines applied and reactive forces, and describes different types of supports including roller, hinge, and fixed supports. It then defines and describes different types of beams, including cantilever, simply supported, overhanging, fixed, and continuous beams. It also discusses types of loads, including concentrated and distributed loads, and how beams experience both bending and shear forces from loads.
Recommended
A study on _ buckling
The document discusses buckling and its theories. It defines buckling as the failure of a slender structural member subjected to compressive loads. It provides examples of structures that can experience buckling. It explains Euler's theory of buckling which derived an equation for the critical buckling load of a long column based on its bending stress. The assumptions of Euler's theory are listed. Four cases of long column buckling based on end conditions are examined: both ends pinned, both ends fixed, one end fixed and one end pinned, one end fixed and one end free. Effective lengths are defined for each case and the corresponding critical buckling loads given. Limitations of Euler's theory are noted. Rankine's empirical formula for calculating ultimate
Fem class notes
This document contains lecture notes on the finite element method from Dr. Atteshamuddin S. Sayyad. It covers the fundamentals of elasticity theory including assumptions, basic terms like stresses and strains, equilibrium equations, and strain-displacement relationships. The notes provide definitions and equations for normal and shear stresses and strains, the state of stress and strain at a point, and developing the governing equations of equilibrium in three dimensions from an infinitesimal element.
Buckling of Columns
Columns are the most important structural elements used in buildings. The material given here helps to understand the basics
Introduction to Theory of elasticity and plasticity Att 6521
This document provides an introduction and overview of a course on the theory of elasticity and plasticity. It discusses key topics that will be covered, including stress, strain, material behavior, elasticity problem formulation, energy principles, finite element methods, and plasticity. It outlines the organization of the course, including lecture materials made available online, instructors, office hours, grading based on homework, exams, and participation. Mathematical preliminaries are also introduced, including definitions and properties of scalars, vectors, tensors, and transformations between coordinate systems.
Bending stresses in beams
This document discusses bending stresses in beams. It defines simple or pure bending as when a beam experiences zero shear force and constant bending moment over a length. For simple bending, the stress distribution can be calculated using beam theory. The key points are:
- Bending stresses are introduced due to bending moments and are highest at the extreme fibers furthest from the neutral axis.
- The neutral axis experiences no bending stress and its location is defined by the centroidal axis of the beam cross-section.
- Bending stress is directly proportional to the distance from the neutral axis. The stress distribution follows σ = My/I, where M is the bending moment, y is the distance from neutral axis, and I is
Principle of Superposition
Text book for the mechanics of materials
[Part VIII] Principle of Superposition (in English)
note: Your feedback is welcome!
Torsion of circular shafts
This document discusses mechanics of solid members subjected to torsional loads. It describes how torsion works, generating shear stresses in circular shafts. The key equations for relating applied torque (T) to shear stress (τ) and angle of twist (θ) are developed. For a solid circular shaft under torque T, the maximum shear stress τmax occurs at the outer surface and is equal to T/J, where J is the polar moment of inertia of the cross section. Power transmitted by a shaft is also defined as 2πNT, where N is rotational speed in revolutions per minute. Shear stress distribution and failure modes under yielding are also briefly covered.
Shear force and bending moment
The document discusses beams, which are horizontal structural members that support applied loads. It defines applied and reactive forces, and describes different types of supports including roller, hinge, and fixed supports. It then defines and describes different types of beams, including cantilever, simply supported, overhanging, fixed, and continuous beams. It also discusses types of loads, including concentrated and distributed loads, and how beams experience both bending and shear forces from loads.
Types of loads, beams, support and support reaction calculation
give information on:-
types of loads
types of beams
types of support
support reaction calculation
Unit 2 simple stresses and strain
This document discusses mechanics of structures and simple stresses and strains. It covers the following key points in 3 sentences:
The document introduces mechanical properties of materials like strength, stiffness, elasticity and defines different types of loads, stresses and strains. It explains concepts like axial load, shear load and different types of stresses and strains. Various mechanical properties of materials are defined along with important formulas for calculating stresses, strains, modulus of elasticity and deformation of structures under different loads.
3.4 pushover analysis
This document discusses pushover analysis, which is an inelastic static analysis method used to evaluate seismic performance of structures. It begins by outlining the target performance levels dictated by codes, then provides an overview of current analysis methods and their limitations. Next, it describes the steps of a pushover analysis in detail, including defining member behavior, applying loads, specifying the load pattern, and incrementally forming plastic hinges. An example application to a 3-story frame structure is presented to demonstrate the process. The document concludes by emphasizing pushover analysis as a practical alternative to time history analysis for estimating seismic response.
Unsymmetrical bending (2nd year)
Lecture slides on the calculation of the bending stress in case of unsymmetrical bending. The Mohr's circle is used to determine the principal second moments of area.
Torsion of Non Circular Bars Saint Venants Theory
S4 ME BTech
KTU Advanced Mechanics of Solids-Module 5- Part B
TORSION OF GENERAL PRISMATIC BARS – SOLID SECTIONS, Saint Venant’s Method,Boundary Condition of Warping Function
Truss-method of joints
This document summarizes the analysis of trusses using the method of joints. It outlines key assumptions made in truss analysis including that members only connect at joints and are pinned, loads only act at joints, and member weights are neglected. It then describes that trusses are made up of connected triangles, with new triangles added by members and joints. The method of joints involves applying equilibrium equations to each joint to solve for member forces, with only two independent equations at each joint. Forces are categorized as compression, tension or no force depending on the direction between the joint and member. Example problems are provided to demonstrate applying this method.
1. simple stress and strains
Ekeeda is an online portal which creates and provides exclusive content for all branches engineering.To have more updates you can goto www.ekeeda.com..or you can contact on 8433429809...
Moment area theorem
1) The document discusses using the moment area method to solve for the deflection of a statically indeterminate beam.
2) It provides the theorems of the moment area method and outlines the process of drawing the M/EI diagram, elastic curve, and using the theorems to calculate slope change and vertical deviation.
3) As an example, it then applies the method to find the maximum downward deflection of a small aluminum beam with an applied force of 100N, showing the steps of determining the redundant reaction, drawing the diagrams, and using the theorems.
Finite element method
This document provides an introduction to finite element analysis and stiffness matrices. It discusses modeling a linear spring and elastic bar as finite elements. The key points are:
1. The stiffness matrix contains information about an element's resistance to deformation from applied loads. It relates nodal displacements and forces for the element.
2. A linear spring and elastic bar can each be modeled as a finite element with a 2x2 stiffness matrix. Their matrices are derived from relating nodal displacements to forces based on Hooke's law and the element's geometry.
3. A system of multiple elements is modeled by assembling the individual element stiffness matrices into a global system stiffness matrix, relating total nodal displacements and forces
2 axial loading
The document discusses stress and strain under axial loading. It covers topics such as normal strain, stress-strain diagrams, Hooke's law, elastic and plastic behavior, fatigue, deformations under axial loading, static indeterminacy, thermal stresses, Poisson's ratio, generalized Hooke's law, shear strain, relations among elastic properties, composite materials, stress concentrations, and examples.
Simple stresses and strains
The document discusses stress and strain in engineering structures. It defines load, stress, strain and different types of each. Stress is the internal resisting force per unit area within a loaded component. Strain is the ratio of dimensional change to original dimension of a loaded body. Loads can be tensile, compressive or shear. Hooke's law states stress is proportional to strain within the elastic limit. The elastic modulus defines this proportionality. A tensile test measures the stress-strain curve, identifying elastic limit and other failure points. Multi-axial stress-strain relationships follow Poisson's ratio definitions.
Truss
Truss is a framework, typically consisting of rafters, posts, and struts, supporting a roof, bridge, or other structure.
a truss is a structure that "consists of two-force members only, where the members are organized so that the assemblage as a whole behaves as a single object"
Bending stresses in beams
Bending Stresses are important in the design of beams from strength point of view. The present source gives an idea on theory and problems in bending stresses.
Statics and Strength of Materials Formula Sheet
This document provides formulas and concepts related to statics and strength of materials. It includes:
1) Basic definitions and equations for statics including free body diagrams, force and moment balance, and methods for analyzing trusses and frames.
2) Cross-section geometry formulas for area, moment of inertia, and centroid location for common shapes.
3) Stress, strain, and Hooke's law relationships as well as stress and deformation equations for common cases like tension, torsion, bending and pressure vessels.
4) Miscellaneous formulas including buckling, Mohr's circle, and power in a shaft.
Fluid mechanics lectur notes
This document contains lecture notes on fluid mechanics. It begins with an introduction to fluid mechanics, including definitions of key terms like fluid, continuum, density, and viscosity. It then covers topics in fluid statics like pressure, hydrostatic force, and buoyancy. Later sections discuss the description and analysis of fluid motion using concepts like the control volume, streamlines, and conservation equations. The document aims to explain the physics of fluid motion to undergraduate students through examples and without advanced mathematics.
Prof.N.B.HUI Lecture of solid mechanics
This document provides information about the Solid Mechanics course ME 302 taught by Dr. Nirmal Baran Hui at NIT Durgapur in West Bengal, India. It lists four required textbooks for the course and provides a detailed syllabus covering topics like stress, strain, elasticity, bending, deflection, columns, torsion, pressure vessels, combined loadings, springs, and failure theories. The document also includes examples of lecture content on stress analysis, stresses on oblique planes, and material subjected to pure shear.
Introduction to Strength of Materials
This document outlines an introduction to strength of materials course taught by Dr. Dawood S. Atrushi. The course covers topics such as simple stress and strain, shear force and bending moment diagrams, stresses in beams, and torsion. It discusses how strength of materials relates to other areas of mechanics and engineering. The course aims to help students understand how different forces affect structural components and materials, and analyze stresses and deformations. SI units and concepts like stress, internal forces, and free-body diagrams are also introduced.
Study of Strain Energy due to Shear, Bending and Torsion
Strain Energy-Definition and Related Formulas, Strain Energy due to Shear Loading, Strain Energy due to Bending, Strain Energy due to Torsion and Examples
Sap2000 v10
SAP2000 is finite element analysis software for structural engineering that allows 3D modeling and analysis of structures like buildings and bridges. It can analyze static and dynamic load cases, perform reinforced concrete and steel design, and has modules for bridge, offshore, and soil-structure interaction modeling. The software features a powerful graphical interface for modeling, analysis, post-processing, and design within a single integrated environment.
Stiffness method of structural analysis
This method is a powerful tool for analyzing indeterminate structures. One of its advantages over the flexibility method is that it is conducive to computer programming.
Stiffness method the unknowns are the joint displacements in the structure, which are automatically specified.
Timoshenko
Timoshenko authored many influential engineering textbooks that helped improve engineering education worldwide. Some of his most notable works include Strength of Materials, published in 1908-1910, which had a dramatic impact when published in English in 1930. It was translated into many languages. Similarly, his book on elastic theory published from 1909-1916 had a large influence when published in English in 1925. Later, his book Vibration Problems in Engineering, co-authored with Young, also saw wide translation. Through his prolific writing and emphasis on improving pedagogy, Timoshenko played a key role in advancing technical education, especially in America.
International Journal of Structural Glass and Advanced Materials Research. Sp...
The document announces a special issue of the International Journal of Structural Glass and Advanced Materials Research on "Current Challenges in Materials Design". The special issue will include selected papers presented at the 6th International Workshop on Design for Civil and Environmental Engineering. Potential topics include new engineered materials, design methodology, and interdisciplinary challenges in engineering design. The guest editors are Chiara Bedon, Fausto Mistretta, Mauro Sassu, and Flavio Stochino of the University of Cagliari. The submission deadline is January 31, 2018.
More Related Content
What's hot
Types of loads, beams, support and support reaction calculation
give information on:-
types of loads
types of beams
types of support
support reaction calculation
Unit 2 simple stresses and strain
This document discusses mechanics of structures and simple stresses and strains. It covers the following key points in 3 sentences:
The document introduces mechanical properties of materials like strength, stiffness, elasticity and defines different types of loads, stresses and strains. It explains concepts like axial load, shear load and different types of stresses and strains. Various mechanical properties of materials are defined along with important formulas for calculating stresses, strains, modulus of elasticity and deformation of structures under different loads.
3.4 pushover analysis
This document discusses pushover analysis, which is an inelastic static analysis method used to evaluate seismic performance of structures. It begins by outlining the target performance levels dictated by codes, then provides an overview of current analysis methods and their limitations. Next, it describes the steps of a pushover analysis in detail, including defining member behavior, applying loads, specifying the load pattern, and incrementally forming plastic hinges. An example application to a 3-story frame structure is presented to demonstrate the process. The document concludes by emphasizing pushover analysis as a practical alternative to time history analysis for estimating seismic response.
Unsymmetrical bending (2nd year)
Lecture slides on the calculation of the bending stress in case of unsymmetrical bending. The Mohr's circle is used to determine the principal second moments of area.
Torsion of Non Circular Bars Saint Venants Theory
S4 ME BTech
KTU Advanced Mechanics of Solids-Module 5- Part B
TORSION OF GENERAL PRISMATIC BARS – SOLID SECTIONS, Saint Venant’s Method,Boundary Condition of Warping Function
Truss-method of joints
This document summarizes the analysis of trusses using the method of joints. It outlines key assumptions made in truss analysis including that members only connect at joints and are pinned, loads only act at joints, and member weights are neglected. It then describes that trusses are made up of connected triangles, with new triangles added by members and joints. The method of joints involves applying equilibrium equations to each joint to solve for member forces, with only two independent equations at each joint. Forces are categorized as compression, tension or no force depending on the direction between the joint and member. Example problems are provided to demonstrate applying this method.
1. simple stress and strains
Ekeeda is an online portal which creates and provides exclusive content for all branches engineering.To have more updates you can goto www.ekeeda.com..or you can contact on 8433429809...
Moment area theorem
1) The document discusses using the moment area method to solve for the deflection of a statically indeterminate beam.
2) It provides the theorems of the moment area method and outlines the process of drawing the M/EI diagram, elastic curve, and using the theorems to calculate slope change and vertical deviation.
3) As an example, it then applies the method to find the maximum downward deflection of a small aluminum beam with an applied force of 100N, showing the steps of determining the redundant reaction, drawing the diagrams, and using the theorems.
Finite element method
This document provides an introduction to finite element analysis and stiffness matrices. It discusses modeling a linear spring and elastic bar as finite elements. The key points are:
1. The stiffness matrix contains information about an element's resistance to deformation from applied loads. It relates nodal displacements and forces for the element.
2. A linear spring and elastic bar can each be modeled as a finite element with a 2x2 stiffness matrix. Their matrices are derived from relating nodal displacements to forces based on Hooke's law and the element's geometry.
3. A system of multiple elements is modeled by assembling the individual element stiffness matrices into a global system stiffness matrix, relating total nodal displacements and forces
2 axial loading
The document discusses stress and strain under axial loading. It covers topics such as normal strain, stress-strain diagrams, Hooke's law, elastic and plastic behavior, fatigue, deformations under axial loading, static indeterminacy, thermal stresses, Poisson's ratio, generalized Hooke's law, shear strain, relations among elastic properties, composite materials, stress concentrations, and examples.
Simple stresses and strains
The document discusses stress and strain in engineering structures. It defines load, stress, strain and different types of each. Stress is the internal resisting force per unit area within a loaded component. Strain is the ratio of dimensional change to original dimension of a loaded body. Loads can be tensile, compressive or shear. Hooke's law states stress is proportional to strain within the elastic limit. The elastic modulus defines this proportionality. A tensile test measures the stress-strain curve, identifying elastic limit and other failure points. Multi-axial stress-strain relationships follow Poisson's ratio definitions.
Truss
Truss is a framework, typically consisting of rafters, posts, and struts, supporting a roof, bridge, or other structure.
a truss is a structure that "consists of two-force members only, where the members are organized so that the assemblage as a whole behaves as a single object"
Bending stresses in beams
Bending Stresses are important in the design of beams from strength point of view. The present source gives an idea on theory and problems in bending stresses.
Statics and Strength of Materials Formula Sheet
This document provides formulas and concepts related to statics and strength of materials. It includes:
1) Basic definitions and equations for statics including free body diagrams, force and moment balance, and methods for analyzing trusses and frames.
2) Cross-section geometry formulas for area, moment of inertia, and centroid location for common shapes.
3) Stress, strain, and Hooke's law relationships as well as stress and deformation equations for common cases like tension, torsion, bending and pressure vessels.
4) Miscellaneous formulas including buckling, Mohr's circle, and power in a shaft.
Fluid mechanics lectur notes
This document contains lecture notes on fluid mechanics. It begins with an introduction to fluid mechanics, including definitions of key terms like fluid, continuum, density, and viscosity. It then covers topics in fluid statics like pressure, hydrostatic force, and buoyancy. Later sections discuss the description and analysis of fluid motion using concepts like the control volume, streamlines, and conservation equations. The document aims to explain the physics of fluid motion to undergraduate students through examples and without advanced mathematics.
Prof.N.B.HUI Lecture of solid mechanics
This document provides information about the Solid Mechanics course ME 302 taught by Dr. Nirmal Baran Hui at NIT Durgapur in West Bengal, India. It lists four required textbooks for the course and provides a detailed syllabus covering topics like stress, strain, elasticity, bending, deflection, columns, torsion, pressure vessels, combined loadings, springs, and failure theories. The document also includes examples of lecture content on stress analysis, stresses on oblique planes, and material subjected to pure shear.
Introduction to Strength of Materials
This document outlines an introduction to strength of materials course taught by Dr. Dawood S. Atrushi. The course covers topics such as simple stress and strain, shear force and bending moment diagrams, stresses in beams, and torsion. It discusses how strength of materials relates to other areas of mechanics and engineering. The course aims to help students understand how different forces affect structural components and materials, and analyze stresses and deformations. SI units and concepts like stress, internal forces, and free-body diagrams are also introduced.
Study of Strain Energy due to Shear, Bending and Torsion
Strain Energy-Definition and Related Formulas, Strain Energy due to Shear Loading, Strain Energy due to Bending, Strain Energy due to Torsion and Examples
Sap2000 v10
SAP2000 is finite element analysis software for structural engineering that allows 3D modeling and analysis of structures like buildings and bridges. It can analyze static and dynamic load cases, perform reinforced concrete and steel design, and has modules for bridge, offshore, and soil-structure interaction modeling. The software features a powerful graphical interface for modeling, analysis, post-processing, and design within a single integrated environment.
Stiffness method of structural analysis
This method is a powerful tool for analyzing indeterminate structures. One of its advantages over the flexibility method is that it is conducive to computer programming.
Stiffness method the unknowns are the joint displacements in the structure, which are automatically specified.
What's hot (20)
Types of loads, beams, support and support reaction calculation
Types of loads, beams, support and support reaction calculation
Study of Strain Energy due to Shear, Bending and Torsion
Study of Strain Energy due to Shear, Bending and Torsion
Viewers also liked
Timoshenko
Timoshenko authored many influential engineering textbooks that helped improve engineering education worldwide. Some of his most notable works include Strength of Materials, published in 1908-1910, which had a dramatic impact when published in English in 1930. It was translated into many languages. Similarly, his book on elastic theory published from 1909-1916 had a large influence when published in English in 1925. Later, his book Vibration Problems in Engineering, co-authored with Young, also saw wide translation. Through his prolific writing and emphasis on improving pedagogy, Timoshenko played a key role in advancing technical education, especially in America.
International Journal of Structural Glass and Advanced Materials Research. Sp...
The document announces a special issue of the International Journal of Structural Glass and Advanced Materials Research on "Current Challenges in Materials Design". The special issue will include selected papers presented at the 6th International Workshop on Design for Civil and Environmental Engineering. Potential topics include new engineered materials, design methodology, and interdisciplinary challenges in engineering design. The guest editors are Chiara Bedon, Fausto Mistretta, Mauro Sassu, and Flavio Stochino of the University of Cagliari. The submission deadline is January 31, 2018.
Reinforced slab bridge design(AASHTO allowable stress design method)
This document provides an overview of reinforced concrete slab bridge design. It discusses the types of reinforced concrete bridges, including slab, beam and slab, arch, box girder, cable-stayed, and integral bridges. It also outlines the loads that must be considered in slab bridge design, including truck, other roadway, sidewalk, and impact loads. Finally, it details the design steps for slab and edge beam components, including calculating bending moments from dead and live loads, determining the effective depth, area of main and distributed reinforcement, and designing the edge beam reinforcement.
Types of Bridge Superstructures
There are several main types of bridge superstructures including beam bridges, arch bridges, truss bridges, suspension bridges, cable-stayed bridges, cantilever bridges, and moveable bridges. Beam bridges use simple beams to span distances, while arch bridges use curved structures to support weight. Truss bridges employ a framework of connected elements in triangles to support loads across a gap.
Bridge Engineering and Extreme Events: Wind effects on bridge decks
Following a series of catastrophic bridge failures, the adverse effects of wind loading on bridges has become a widely discussed topic in the realm of bridge design and research. Currently however, the majority of research focuses on the contribution of wind in long span bridge design. This is primarily because long span bridges have a greater inherent tendency to become aerodynamically unstable. Nonetheless, wind can also contribute to the shear and moment of short span bridges, thereby influencing the limit state of various components in these short span bridge systems. To narrow this scope, the following presentation focuses specifically on the contributions of wind to the shear and moment of slab and girder bridge decks. These contributions are quantified by a model that calculates the shear and moment due to wind loads for a number of variable parameters including angle of impact, bridge height, span length, and deck thickness. Ultimately, it is found that angle of attack has the greatest impact on moment, while span length has the greatest impact on shear about center span.
Deck slab bridge
Analysis and designing of deck slab bridge: steps to plan and construct a bridge to the steps related to the designing
Collapse propagation in bridge structures. A semi-analytical model
Michele Brun.
We consider the advance of a transition flexural wave through a beam-like periodically supported slender structure. The
collapse of a bridge structure is modeled as a steady-state propagation of a transition wave within a slender structure. The problem is
governed by fourth-order partial differential equations and both propagating and evanescent waves are included in the general solution. It is
shown that the problem can be expressed within a class of functional equations of the Wiener-Hopf type . Three different propagation
regimes are found: subsonic, intersonic and supersonic and it is shown that propagation is restricted to the intersonic regime where part of the
energy is released to the damaged structure.
Applications to the study of the collapse of the San Saba bridge in Texas shows the validity of the model.
Bridge Design Engineering - In the Saddle - Issue 85 - 2016
An article about analysis of structural behavior of saddles for stay cables, including standards comparison and laboratory testing.
Advanced strength and applied stress analysis by richard g. budynas
This document outlines a plan for a company reorganization that will reduce costs. It proposes consolidating several smaller departments into two larger divisions to remove redundant manager and supervisor roles. This restructuring is estimated to save the company $500,000 per year in personnel expenses.
Bridge engineering (super structure and substructure components)
This document appears to be a report submitted by a student named Oliver M. Olhon to his instructor Engr. Genelyn Caritos about bridge engineering. It includes sections on the superstructure of a bridge including the deck, primary and secondary members, and wearing surface. It also covers the substructure including pier columns, abutments, bearings, pedestals, footings, approach slabs, piled footings, pile caps, traffic barriers, stems, and wingwalls.
Design of reinforced flat slabs to bs 8110 (ciria 110)
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
Flat plate slab design (10.01.03.052)
This document discusses the design of flat plate slabs. Flat plates are concrete slabs that are carried directly by columns without beams or girders. They are commonly used for spans up to 25 feet and loads up to 100 pounds per square foot. The load is directly transferred to the columns, making punching shear at the column connections critical. Proper reinforcement detailing is required between the slab and columns. Moment determination and shear design are important steps in the flat plate slab design process. Advantages include simplified formwork and reduced story height, while limitations include increased thickness and weight.
Shear, bond bearing,camber & deflection in prestressed concrete
This Presentation was presented as a partial fulfillment of Prestressed Concrete Design Lab Course. Behavior & Design of Prestress on above topic is shortly discussed on the presentation. The part "Shear & Shear Design in Prestressed" Concrete was prepared by me. Other topics were prepared by other members of my group. Thanks to all my teachers & friends who helped us in different stages during preparation of the total presentation.
Design and detailing of flat slabs
- The document describes the design and detailing of flat slabs, which are concrete slabs supported directly by columns without beams.
- Key aspects covered include dimensional considerations, analysis methods, design for bending moments including division of panels and limiting negative moments, shear design and punching shear, deflection and crack control, and design procedures.
- An example problem is provided to illustrate the full design process for an internal panel with drops adjacent to edge panels.
Fundamentals of-psc-bridge
This document provides an introduction to prestressed concrete bridge design. It discusses how prestressing concrete induces compression to counteract tensile stresses from loading. Prestressed concrete allows for longer concrete bridge spans through precasting units that are lifted into place. The document covers methods of prestressing including pre-tensioning and post-tensioning. It also summarizes design considerations like serviceability limits, stress limitations, prestress losses, and establishes basic inequalities for prestress force and section properties. Magnel diagrams are introduced as a way to determine appropriate prestress force and eccentricity values.
Prestressed Concrete Design
This document provides an introduction to prestressed concrete, including:
1. The basic principles of prestressing concrete by applying compressive stresses that counteract tensile stresses from loads. This allows for smaller member sizes.
2. The main advantages are smaller sections, reduced deflections, increased spans, and improved durability due to reduced cracking.
3. The two main methods are pre-tensioning, where strands are stressed before casting, and post-tensioning, where strands are tensioned after casting through ducts.
4. Uses include precast beams, slabs, piles, tanks, and bridges constructed with either precast or post-tensioned segments.
types of bridges
This document provides an overview of different types of bridges, including their basic designs, histories, and functions. It discusses beam bridges, arch bridges, suspension bridges, cantilever bridges, truss bridges, cable-stayed bridges, floating bridges, and culverts. The document describes the key forces and materials involved in each bridge type and how they are able to span different distances. It also gives brief histories on the development of bridges from ancient times to modern innovations in bridge engineering.
Flat slab ppt
This document discusses the design of flat slab structures. It begins by defining a flat slab as a type of slab supported directly on columns without beams. It then provides details on the types of flat slabs, their common uses in buildings, and benefits such as flexibility in layout and reduced construction time. The document goes on to discuss key design considerations for flat slabs including thickness, drops, column heads, and methods of analysis. It focuses on the direct design method and provides limitations for its use.
Prestressed concrete
This document discusses different methods of prestressing concrete, including pretensioning and post-tensioning. Pretensioning involves stressing steel tendons before placing concrete around them, while post-tensioning involves stressing tendons after the concrete has cured using hydraulic jacks. Post-tensioning allows for longer spans, thinner slabs, and more architectural freedom compared to conventional reinforced concrete or pretensioned concrete. Common applications of post-tensioning include parking structures, bridges, and building floors and roofs.
PPT On Bridge Construction
Bridge Construction in my ppt we tell about how to construct a bridge and history of bridge and foundation
Viewers also liked (20)
International Journal of Structural Glass and Advanced Materials Research. Sp...
International Journal of Structural Glass and Advanced Materials Research. Sp...
Reinforced slab bridge design(AASHTO allowable stress design method)
Reinforced slab bridge design(AASHTO allowable stress design method)
Bridge Engineering and Extreme Events: Wind effects on bridge decks
Bridge Engineering and Extreme Events: Wind effects on bridge decks
Collapse propagation in bridge structures. A semi-analytical model
Collapse propagation in bridge structures. A semi-analytical model
Bridge Design Engineering - In the Saddle - Issue 85 - 2016
Bridge Design Engineering - In the Saddle - Issue 85 - 2016
Advanced strength and applied stress analysis by richard g. budynas
Advanced strength and applied stress analysis by richard g. budynas
Bridge engineering (super structure and substructure components)
Bridge engineering (super structure and substructure components)
Design of reinforced flat slabs to bs 8110 (ciria 110)
Design of reinforced flat slabs to bs 8110 (ciria 110)
Shear, bond bearing,camber & deflection in prestressed concrete
Shear, bond bearing,camber & deflection in prestressed concrete
Recently uploaded
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Recently uploaded (20)
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx