Tfs range 2019
•
0 likes•17 views
The document describes a range of tension fabric system profiles from Micro TFS to Double Sided TFS. Micro TFS is ideal for small frames and has the slimmest profile, while TFS Lite can be screwed directly to walls or hung on brackets for medium frames. Double Sided TFS is for extra large frames and structures and can be rolled to create curved displays.
Report
Share
Report
Share
Download to read offline
Recommended
Designing for long spans 2
The document discusses long span and complex structures. It defines long span structures as having a span larger than 20m and being unable to be achieved by ordinary reinforced concrete structures. It then covers various types of materials used for long span structures and common structural forms such as reinforced concrete, precast concrete, structural steel, and portal frames. The document further categorizes long span structures into form active, vector active, section active, and surface active systems with examples provided. Notable overseas and Chinese examples of long span structures are highlighted such as stadiums, airports, and exhibition centers.
Steel Roof Truss
This document summarizes steel roof trusses. Most building roofs can be framed with prefabricated light-gauge steel trusses, which offer a high-strength, lightweight roof system that can be installed quickly. Steel trusses are manufactured from C-shaped galvanized steel and are stronger than wood trusses. They are constructed by connecting chord and web members made of steel into triangular shapes, then bolting or welding them together on the ground before installing the completed truss on the roof. All steel roofing has a protective metallic coating to prevent rusting.
Steel portal frames
This document discusses steel portal frames, which are low-rise structures used for industrial and warehouse buildings. They consist of columns connected by horizontal or pitched beams via moment-resisting connections. This allows the frame to act as a single structural unit and reduces bending moments in the beams. Pin joints are introduced to overcome rotational stresses from the beams to the columns. The document then discusses loads on portal frames, proper joint and foundation design, and bracing requirements. It provides specifications for typical steel sections used in portal frames and dimensions. Finally, it summarizes the steel portal frame roof design of the Turbhe Railway Station in India, which features an 84-meter long semi-circular ribbed arch roof.
The cable in building structures
The lecture is in support of:
(1) The Design of Building Structures (Vol.1, Vol. 2), rev. ed., PDF eBook by Wolfgang Schueller, 2016: chapter 9.
(2) Building Support Structures, Analysis and Design with SAP2000 Software, 2nd ed., eBook by Wolfgang Schueller: chapter 11.
6 portal frames
Portal frames are commonly used for single-story industrial buildings. They consist of hot-rolled columns and rafters that support roofing and siding. Rafter slopes typically range from 1 in 10 to 1 in 3. Frame spacing is 6-7.5m with heights of 6-15m. Plastic analysis is used to design portal frames to allow formation of plastic hinges and economic design. Connections require moment capacity, stiffness, rotation capacity, and economy. Haunched connections are often used at the eaves and ridge to increase moment capacity. Secondary checks consider axial force effects, buckling, fracture, and deflection.
Uses of steel cables @akshay kumar
Wire rope, also called cable, consists of several strands of metal wire twisted into a helix. Wire rope generally refers to diameters larger than 3/8 inch, while smaller diameters are called cables or cords. Steel is the most common material used in wire ropes today. Individual wires are first twisted into strands, then several strands are twisted around a core to cushion stress forces during bending. Common configurations include 6x19 and 7x7. Cables are used in structural applications like suspension bridges, cable stayed bridges, roof structures, and glass walls. Suspension bridges hang the deck below suspension cables attached to towers, while cable stayed bridges support the deck with cables running directly from one or more towers.
Portal frame by Rhythm Murgai
This document provides information on portal frame design, including three types of portal frames:
1) Rigid portal frame with all rigid connections
2) Two pin portal frame with hinged connections at the base
3) Three pin portal frame with hinged joints at the base and center
It also discusses factors that influence wind loading, three loading cases to consider, and methods for analyzing and designing portal frames.
EC3 design
This document summarizes the design of a steel frame structure for an indoor sports facility in Portugal according to Eurocode standards. It describes the architectural design of a dual-pitch roof and choice of structural steel components including planar truss rafters. It also outlines the modeling approach in SAP2000 including definition of loads such as self-weight, live, wind and thermal loads according to Eurocode standards. Load combinations are defined for the ultimate limit state structural/geometric verification of members.
Recommended
Designing for long spans 2
The document discusses long span and complex structures. It defines long span structures as having a span larger than 20m and being unable to be achieved by ordinary reinforced concrete structures. It then covers various types of materials used for long span structures and common structural forms such as reinforced concrete, precast concrete, structural steel, and portal frames. The document further categorizes long span structures into form active, vector active, section active, and surface active systems with examples provided. Notable overseas and Chinese examples of long span structures are highlighted such as stadiums, airports, and exhibition centers.
Steel Roof Truss
This document summarizes steel roof trusses. Most building roofs can be framed with prefabricated light-gauge steel trusses, which offer a high-strength, lightweight roof system that can be installed quickly. Steel trusses are manufactured from C-shaped galvanized steel and are stronger than wood trusses. They are constructed by connecting chord and web members made of steel into triangular shapes, then bolting or welding them together on the ground before installing the completed truss on the roof. All steel roofing has a protective metallic coating to prevent rusting.
Steel portal frames
This document discusses steel portal frames, which are low-rise structures used for industrial and warehouse buildings. They consist of columns connected by horizontal or pitched beams via moment-resisting connections. This allows the frame to act as a single structural unit and reduces bending moments in the beams. Pin joints are introduced to overcome rotational stresses from the beams to the columns. The document then discusses loads on portal frames, proper joint and foundation design, and bracing requirements. It provides specifications for typical steel sections used in portal frames and dimensions. Finally, it summarizes the steel portal frame roof design of the Turbhe Railway Station in India, which features an 84-meter long semi-circular ribbed arch roof.
The cable in building structures
The lecture is in support of:
(1) The Design of Building Structures (Vol.1, Vol. 2), rev. ed., PDF eBook by Wolfgang Schueller, 2016: chapter 9.
(2) Building Support Structures, Analysis and Design with SAP2000 Software, 2nd ed., eBook by Wolfgang Schueller: chapter 11.
6 portal frames
Portal frames are commonly used for single-story industrial buildings. They consist of hot-rolled columns and rafters that support roofing and siding. Rafter slopes typically range from 1 in 10 to 1 in 3. Frame spacing is 6-7.5m with heights of 6-15m. Plastic analysis is used to design portal frames to allow formation of plastic hinges and economic design. Connections require moment capacity, stiffness, rotation capacity, and economy. Haunched connections are often used at the eaves and ridge to increase moment capacity. Secondary checks consider axial force effects, buckling, fracture, and deflection.
Uses of steel cables @akshay kumar
Wire rope, also called cable, consists of several strands of metal wire twisted into a helix. Wire rope generally refers to diameters larger than 3/8 inch, while smaller diameters are called cables or cords. Steel is the most common material used in wire ropes today. Individual wires are first twisted into strands, then several strands are twisted around a core to cushion stress forces during bending. Common configurations include 6x19 and 7x7. Cables are used in structural applications like suspension bridges, cable stayed bridges, roof structures, and glass walls. Suspension bridges hang the deck below suspension cables attached to towers, while cable stayed bridges support the deck with cables running directly from one or more towers.
Portal frame by Rhythm Murgai
This document provides information on portal frame design, including three types of portal frames:
1) Rigid portal frame with all rigid connections
2) Two pin portal frame with hinged connections at the base
3) Three pin portal frame with hinged joints at the base and center
It also discusses factors that influence wind loading, three loading cases to consider, and methods for analyzing and designing portal frames.
EC3 design
This document summarizes the design of a steel frame structure for an indoor sports facility in Portugal according to Eurocode standards. It describes the architectural design of a dual-pitch roof and choice of structural steel components including planar truss rafters. It also outlines the modeling approach in SAP2000 including definition of loads such as self-weight, live, wind and thermal loads according to Eurocode standards. Load combinations are defined for the ultimate limit state structural/geometric verification of members.
long span roof
This document discusses different types of long span roof structures including portal frame roofs. It describes the anatomy of a typical portal frame roof, which comprises columns, rafters, secondary steelwork like purlins and side rails, and cladding. Different types of portal frames are also discussed. The document further explains installation methods for metal decking on long span roofs and considers natural lighting and ventilation for industrial buildings.
Stucture large span area
This document discusses long span building structures. It defines long span as structures with spans larger than 20m that cannot be achieved with ordinary reinforced concrete structures. It lists various loads that act on structural systems including dead, live, wind, and temperature loads. It also lists common materials that can be used for long span structures such as reinforced concrete, steel, timber, and composites. Common structural forms including insitu and precast concrete, steel structures, and portal frames are discussed. Long span structures are classified into form active, vector active, section active, and surface active systems with examples provided. Design considerations for long span beams are also mentioned, noting benefits such as flexible column-free spaces. Long span buildings create large column-
Design of long span floor system
This document discusses long span floor systems and provides classifications and examples of different structural forms used for long spans. It discusses form active systems like cable structures, tent structures and arch structures. It also discusses section active systems like frame structures and surface active systems like shell structures and folded plate structures. Specific examples of projects using different structural forms are provided along with their advantages and limitations.
General layout of steel structures
This document provides information on general layout and design of steel industrial buildings, including:
1. Main structural systems used for different span lengths.
2. Arrangement of structural members including columns, rafters, purlins, side girts and bracing.
3. Design considerations for roof slope, covering materials, side walls and end gables.
4. Types of bracing systems used to provide stability under lateral loads.
Structural buildings system and steel bracing
The document discusses different structural systems used for high-rise buildings, including bracing systems. It describes rigid frames, braced frames, shear wall systems, core and outrigger systems, and tube structures. For steel buildings, it outlines vertical and horizontal bracing systems. Vertical bracing includes diagonal bracing installed between columns to transfer horizontal loads and provide stability. Proper bracing is necessary to resist wind forces and second order effects.
Roof trusses
This document discusses roof trusses, including their components, designs, fabrication, installation, and safety. It covers truss types, principles of design, how they are assembled using metal connectors, how they provide structure and span for roofs, and how to properly install and brace trusses. Safety measures are emphasized, such as using fall protection when working on trusses.
Application of the trusses
This document provides information about trusses and their application. It discusses two basic types of trusses - pitched trusses and parallel chord trusses. It describes various truss configurations including Pratt trusses, Bowstring trusses, King post trusses, and Lenticuler trusses. It also discusses how critical component connections are for structural integrity, specifically connections between trusses and their supports that must resist forces like shear, uplift, and bending moment. Wood posts are described as enabling strong, direct connections between large trusses and walls.
Portal frame 1
Steel portal frames are a common form of construction for single-story industrial buildings. They consist of parallel steel frames forming the major structure, with steel columns connected by steel beams or rafters spanning between them. This allows for large clear spans of up to 40 meters. The frames are spaced 5-10 meters apart and support the roof structure and unobstructed floor space within. Concrete or masonry walls can be attached to the frames.
Design of truss roofing by Engineer Muhammad Kamal Anwar khan malla khel
This document provides information on the design and types of truss roofs. It discusses:
1) The key properties of trusses, including that members experience only axial forces and loads are applied at panel points.
2) The main types of trusses used - Type I for snowy climates with steeper pitches, and Type II for hot climates with flatter or low pitches. Common truss configurations are also described.
3) Related terms like pitch, inclination, height, and panel length which describe truss geometry and dimensions.
4) Additional structural elements like purlins, sag rods, and sheathing which transfer roof loads to the trusses.
PPT OF TRUSSES
The document discusses trusses and steel sections. A truss is a structure comprising triangular units constructed with straight members connected at joints. Trusses distribute external forces through a framework of triangular elements and are used to span large distances. There are different types of trusses including Pratt trusses, Town's lattice trusses, and bowstring trusses. The document also discusses steel sections which are construction materials formed into specific shapes used in engineering structures. Steel is an alloy of iron and carbon.
Chapter 2 (trussed structural system)
The document discusses different types of trusses and structural frames. It describes king post, fink, fan, scissor, pratt, howe, warren, and bowstring trusses, explaining their defining features and common uses. Space frames are defined as three-dimensional frameworks composed of tetrahedral shapes. Cable trays are described as using cables from towers to support bridge decks, with examples given of suspension and cable-stayed bridges.
Tent structure
The document discusses tent structures, providing definitions and describing key components. It notes that tent structures have existed for nomadic peoples but are now used for camping and military purposes. The document outlines several common tent structure types including saddle roof, mast supported, and arc supported structures. It also describes common components like membranes, bale rings, and base plates. Both advantages like flexibility, reusability and environmental friendliness as well as disadvantages like lack of rigidity and thermal limitations are highlighted.
Roof trusses
Roof trusses are triangular structures made of interconnected structural elements that provide support for roofs and loads. They are lightweight, allow for long spans and controlled deflection, and can support considerable loads. Common types of trusses include Pratt, Warren, north light, and saw-tooth trusses. Trusses are made of tension and compression members and are an efficient way to support roofs compared to beams. Steel roof trusses are also used and provide durability, strength, and resistance to elements compared to wood trusses.
Long span structures in Concrete and Steel
A presentation that explains the various systems and techniques of employing steel and concrete to support long span structures. The range varies from conventional beams, to trusses and portal frames.
Large span structures
Portal frames are low-rise structures comprising columns and horizontal or pitched rafters connected by moment-resisting connections. They provide clear unobstructed spans and are efficient for enclosing large volumes, making them useful for industrial, commercial, and agricultural buildings. Girder-slab systems combine a structural steel frame with prefabricated concrete girders and slabs for fast construction of mid-to-high rise buildings. Shell structures are thin curved concrete structures that function as both structure and enclosure through their strength and rigidity provided by their form. Common shell structures include folded plate, barrel vaults, and domes of revolution.
parametric study of different geometries of steel truss and optimization
This document summarizes a study on optimizing the geometry of steel truss roof structures. Three truss geometries - a standard fink fan type, N-type, and a combined geometry - were modeled and analyzed under dead, live, and wind loads. The combined geometry performed best with an 18.37% reduction in steel weight and cost savings of Rs. 2,82,480 compared to the fink fan design. The combined geometry also outperformed the N-type design with 3.4% less steel and Rs. 44,238 lower cost. In conclusion, a combined truss geometry can better improve steel roof structure performance under wind loads compared to standard designs.
Long span structures
This presentation describes various types of long span structures that can be designed in accordance to the various needs.
Lintel,roof,beam,striar (by sonani jemish).pptx
The document discusses various elements of civil engineering including beams, lintels, stairs, and roofs.
[1] It defines beams and describes the main types as simply supported, fixed, cantilever, continuous, and overhanging. Lintels are defined as horizontal members above openings and the main types are timber, stone, brick, reinforced brick, steel, and reinforced concrete.
[2] Stairs are described as connecting different floors and the main types include straight, doglegged, quarter turn, open newel, three quarter turn, bifurcated, geometric, and circular.
[3] Roofs are defined as covering the space below. Common roof styles are gable, hip,
Graduation project presentation
The document summarizes the analysis and design of trusses for a Jordanian synchrotron roof structure. It describes the project, loads on the structure, and the analysis process. The trusses were analyzed using structural analysis software. The design process for tension and compression members is then outlined, including selecting sections, checking capacities and slenderness ratios. Examples of designing a compression member and tension member are provided. Finally, the document discusses the procedure for designing truss connections, including determining the number and spacing of bolts.
All types of insulation material suppliers in Greater Noida
we are all types of insulation material suppliers in Noida, we provide various types of insulation including storage tanks, different grades of pipes, vessels, reactors & various equipment for a wide range of process industries. Along with that we provide Hot water piping, Warm water piping, CIP piping &Chiller piping, HVAC piping.
For more details, please visit our website -https://avengineersefp.com/service/hot-and-cold-insulation/
All types of insulation material suppliers in Greater Noida
we are all types of insulation material suppliers in Noida , we provide various types of insulation including storage tanks, different grades of pipes, vessels, reactors & various equipment for a wide range of process industries.along with that we provide Hot water piping,Warm water piping ,CIP piping &Chiller piping ,HVAC piping.
For more details please visit our website -https://avengineersefp.com/service/hot-and-cold-insulation/
Assignment 2 (techniqes construction of mass building)
This document discusses emerging construction techniques for mass housing, including precast sandwich panel systems, light gauge steel framing, and precast concrete construction. It describes formwork systems that use plastic or aluminum forms to cast concrete monolithically. Precast sandwich panels sandwich an insulating core between welded wire fabric mesh. Light gauge steel uses cold-formed galvanized steel frames. Precast concrete uses prefabricated hollow columns, beams, slabs and stairs. Formwork, precast panels and light gauge steel allow for rapid, repetitive construction of housing units at scale.
More Related Content
What's hot
long span roof
This document discusses different types of long span roof structures including portal frame roofs. It describes the anatomy of a typical portal frame roof, which comprises columns, rafters, secondary steelwork like purlins and side rails, and cladding. Different types of portal frames are also discussed. The document further explains installation methods for metal decking on long span roofs and considers natural lighting and ventilation for industrial buildings.
Stucture large span area
This document discusses long span building structures. It defines long span as structures with spans larger than 20m that cannot be achieved with ordinary reinforced concrete structures. It lists various loads that act on structural systems including dead, live, wind, and temperature loads. It also lists common materials that can be used for long span structures such as reinforced concrete, steel, timber, and composites. Common structural forms including insitu and precast concrete, steel structures, and portal frames are discussed. Long span structures are classified into form active, vector active, section active, and surface active systems with examples provided. Design considerations for long span beams are also mentioned, noting benefits such as flexible column-free spaces. Long span buildings create large column-
Design of long span floor system
This document discusses long span floor systems and provides classifications and examples of different structural forms used for long spans. It discusses form active systems like cable structures, tent structures and arch structures. It also discusses section active systems like frame structures and surface active systems like shell structures and folded plate structures. Specific examples of projects using different structural forms are provided along with their advantages and limitations.
General layout of steel structures
This document provides information on general layout and design of steel industrial buildings, including:
1. Main structural systems used for different span lengths.
2. Arrangement of structural members including columns, rafters, purlins, side girts and bracing.
3. Design considerations for roof slope, covering materials, side walls and end gables.
4. Types of bracing systems used to provide stability under lateral loads.
Structural buildings system and steel bracing
The document discusses different structural systems used for high-rise buildings, including bracing systems. It describes rigid frames, braced frames, shear wall systems, core and outrigger systems, and tube structures. For steel buildings, it outlines vertical and horizontal bracing systems. Vertical bracing includes diagonal bracing installed between columns to transfer horizontal loads and provide stability. Proper bracing is necessary to resist wind forces and second order effects.
Roof trusses
This document discusses roof trusses, including their components, designs, fabrication, installation, and safety. It covers truss types, principles of design, how they are assembled using metal connectors, how they provide structure and span for roofs, and how to properly install and brace trusses. Safety measures are emphasized, such as using fall protection when working on trusses.
Application of the trusses
This document provides information about trusses and their application. It discusses two basic types of trusses - pitched trusses and parallel chord trusses. It describes various truss configurations including Pratt trusses, Bowstring trusses, King post trusses, and Lenticuler trusses. It also discusses how critical component connections are for structural integrity, specifically connections between trusses and their supports that must resist forces like shear, uplift, and bending moment. Wood posts are described as enabling strong, direct connections between large trusses and walls.
Portal frame 1
Steel portal frames are a common form of construction for single-story industrial buildings. They consist of parallel steel frames forming the major structure, with steel columns connected by steel beams or rafters spanning between them. This allows for large clear spans of up to 40 meters. The frames are spaced 5-10 meters apart and support the roof structure and unobstructed floor space within. Concrete or masonry walls can be attached to the frames.
Design of truss roofing by Engineer Muhammad Kamal Anwar khan malla khel
This document provides information on the design and types of truss roofs. It discusses:
1) The key properties of trusses, including that members experience only axial forces and loads are applied at panel points.
2) The main types of trusses used - Type I for snowy climates with steeper pitches, and Type II for hot climates with flatter or low pitches. Common truss configurations are also described.
3) Related terms like pitch, inclination, height, and panel length which describe truss geometry and dimensions.
4) Additional structural elements like purlins, sag rods, and sheathing which transfer roof loads to the trusses.
PPT OF TRUSSES
The document discusses trusses and steel sections. A truss is a structure comprising triangular units constructed with straight members connected at joints. Trusses distribute external forces through a framework of triangular elements and are used to span large distances. There are different types of trusses including Pratt trusses, Town's lattice trusses, and bowstring trusses. The document also discusses steel sections which are construction materials formed into specific shapes used in engineering structures. Steel is an alloy of iron and carbon.
Chapter 2 (trussed structural system)
The document discusses different types of trusses and structural frames. It describes king post, fink, fan, scissor, pratt, howe, warren, and bowstring trusses, explaining their defining features and common uses. Space frames are defined as three-dimensional frameworks composed of tetrahedral shapes. Cable trays are described as using cables from towers to support bridge decks, with examples given of suspension and cable-stayed bridges.
Tent structure
The document discusses tent structures, providing definitions and describing key components. It notes that tent structures have existed for nomadic peoples but are now used for camping and military purposes. The document outlines several common tent structure types including saddle roof, mast supported, and arc supported structures. It also describes common components like membranes, bale rings, and base plates. Both advantages like flexibility, reusability and environmental friendliness as well as disadvantages like lack of rigidity and thermal limitations are highlighted.
Roof trusses
Roof trusses are triangular structures made of interconnected structural elements that provide support for roofs and loads. They are lightweight, allow for long spans and controlled deflection, and can support considerable loads. Common types of trusses include Pratt, Warren, north light, and saw-tooth trusses. Trusses are made of tension and compression members and are an efficient way to support roofs compared to beams. Steel roof trusses are also used and provide durability, strength, and resistance to elements compared to wood trusses.
Long span structures in Concrete and Steel
A presentation that explains the various systems and techniques of employing steel and concrete to support long span structures. The range varies from conventional beams, to trusses and portal frames.
Large span structures
Portal frames are low-rise structures comprising columns and horizontal or pitched rafters connected by moment-resisting connections. They provide clear unobstructed spans and are efficient for enclosing large volumes, making them useful for industrial, commercial, and agricultural buildings. Girder-slab systems combine a structural steel frame with prefabricated concrete girders and slabs for fast construction of mid-to-high rise buildings. Shell structures are thin curved concrete structures that function as both structure and enclosure through their strength and rigidity provided by their form. Common shell structures include folded plate, barrel vaults, and domes of revolution.
parametric study of different geometries of steel truss and optimization
This document summarizes a study on optimizing the geometry of steel truss roof structures. Three truss geometries - a standard fink fan type, N-type, and a combined geometry - were modeled and analyzed under dead, live, and wind loads. The combined geometry performed best with an 18.37% reduction in steel weight and cost savings of Rs. 2,82,480 compared to the fink fan design. The combined geometry also outperformed the N-type design with 3.4% less steel and Rs. 44,238 lower cost. In conclusion, a combined truss geometry can better improve steel roof structure performance under wind loads compared to standard designs.
Long span structures
This presentation describes various types of long span structures that can be designed in accordance to the various needs.
Lintel,roof,beam,striar (by sonani jemish).pptx
The document discusses various elements of civil engineering including beams, lintels, stairs, and roofs.
[1] It defines beams and describes the main types as simply supported, fixed, cantilever, continuous, and overhanging. Lintels are defined as horizontal members above openings and the main types are timber, stone, brick, reinforced brick, steel, and reinforced concrete.
[2] Stairs are described as connecting different floors and the main types include straight, doglegged, quarter turn, open newel, three quarter turn, bifurcated, geometric, and circular.
[3] Roofs are defined as covering the space below. Common roof styles are gable, hip,
Graduation project presentation
The document summarizes the analysis and design of trusses for a Jordanian synchrotron roof structure. It describes the project, loads on the structure, and the analysis process. The trusses were analyzed using structural analysis software. The design process for tension and compression members is then outlined, including selecting sections, checking capacities and slenderness ratios. Examples of designing a compression member and tension member are provided. Finally, the document discusses the procedure for designing truss connections, including determining the number and spacing of bolts.
What's hot (19)
Design of truss roofing by Engineer Muhammad Kamal Anwar khan malla khel
Design of truss roofing by Engineer Muhammad Kamal Anwar khan malla khel
parametric study of different geometries of steel truss and optimization
parametric study of different geometries of steel truss and optimization
Similar to Tfs range 2019
All types of insulation material suppliers in Greater Noida
we are all types of insulation material suppliers in Noida, we provide various types of insulation including storage tanks, different grades of pipes, vessels, reactors & various equipment for a wide range of process industries. Along with that we provide Hot water piping, Warm water piping, CIP piping &Chiller piping, HVAC piping.
For more details, please visit our website -https://avengineersefp.com/service/hot-and-cold-insulation/
All types of insulation material suppliers in Greater Noida
we are all types of insulation material suppliers in Noida , we provide various types of insulation including storage tanks, different grades of pipes, vessels, reactors & various equipment for a wide range of process industries.along with that we provide Hot water piping,Warm water piping ,CIP piping &Chiller piping ,HVAC piping.
For more details please visit our website -https://avengineersefp.com/service/hot-and-cold-insulation/
Assignment 2 (techniqes construction of mass building)
This document discusses emerging construction techniques for mass housing, including precast sandwich panel systems, light gauge steel framing, and precast concrete construction. It describes formwork systems that use plastic or aluminum forms to cast concrete monolithically. Precast sandwich panels sandwich an insulating core between welded wire fabric mesh. Light gauge steel uses cold-formed galvanized steel frames. Precast concrete uses prefabricated hollow columns, beams, slabs and stairs. Formwork, precast panels and light gauge steel allow for rapid, repetitive construction of housing units at scale.
Speed Floor Melbourne Engineers Presentation & Techinicial Data
Speedfloor is a suspended concrete flooring system that uses a light gauge roll formed steel joist composited with an in-situ concrete topping. The system is lightweight, speeds up construction by not requiring propping, and accommodates services by allowing them to pass through pre-punched holes in the joists. It meets fire and acoustic requirements through the use of boards or sprayed cementitious products. The system provides a cost effective flooring solution that is flexible in its applications.
Pre - Engineered Metal Buildings - The Latest Trend In Building construction
Pre-engineered metal buildings use prefabricated steel framing and standardized components to provide a complete building envelope system. This allows buildings to be constructed quickly using various wall, roof, floor, and accessory panels tailored to the required function. Common applications include low-rise commercial and industrial buildings up to 30 meters tall like offices, warehouses, and shops. The pre-engineered approach saves both time and costs compared to conventional construction methods.
Pre engineered metal buildings - the latest trend in building construction
Pre-engineered metal buildings use prefabricated steel framing and standardized components to provide a complete building envelope system. This allows for fast, economical construction of low-rise buildings like warehouses, factories, and houses. The key benefits of pre-engineered metal buildings are their speed of construction, design versatility, energy efficiency from insulated wall and roof panels, and lower long-term maintenance costs compared to traditional construction methods. They are well-suited for a wide variety of commercial and industrial building applications.
Pre - Engineered Metal Buildings - The Latest Trend In Building construction
Pre-engineered metal buildings use prefabricated steel framing and standardized components to provide a complete building envelope system. This allows for fast, economical construction of low-rise buildings like warehouses, factories, and houses. The key benefits of pre-engineered metal buildings are their speed of construction, design versatility, energy efficiency from insulated wall and roof panels, and lower long-term maintenance costs compared to traditional construction methods.
Muscat scaffolding Cuplock System
Cup-lock Scaffolding is a temporary structure used to
support a slab, work crew, and materials to aid in the construction,
maintenance and repair of buildings, bridges and all other
man-made structures.
Cup-lock’s key feature is its unique circular node point which
allows up to 4 horizontals to be connected to a vertical in a
single fastening action-making it probably the fastest and safest
system available.
Cup-lock Scaffolding is a multi-purpose system suitable for access and support in all types of construction of building & Civil engineering project
Industrial construction
A truss is a structure composed of straight members arranged in a triangular pattern and connected at their ends to form a rigid framework. Trusses are commonly used in buildings to support roofs and floors over long spans. They provide strength and support loads using less material than beams. Common types of trusses include Pratt trusses and lattice girders, which are used to support trusses running perpendicular. Trusses are fabricated from rolled steel sections or built-up sections and connected by bolting, welding, or riveting. They are an economical choice for supporting large loads and spans in industrial and commercial buildings.
Sliding & Pivoting Door Systems
This document provides information on various door systems from a manufacturer, including sliding and pivot door systems. It summarizes 14 different sliding door systems like Nano Slyder, Purist, Akzent, Visio, Duplex, Spider, Twin, Klassik, Midway, Minimax, Supra, Terra, Terra-H, Terra-M, and Vario. It also describes 3 pivot door systems: Aura, Akzent, and Case Slim-Line. Each system is designed for different applications and includes details on features, fittings, sizes, and intended uses. The document promotes the manufacturer's comprehensive line of modern, high-quality door hardware systems.
Formwork For Structural Member.pptx
This document provides information on formwork design and construction. It discusses different types of formwork used for structural elements like slabs, beams, columns, footings, staircases and walls. Details are given on materials used, assembly, propping, bracing and stripping times. Guidelines are outlined for designing formwork to be strong, rigid, water tight and easily removable without damaging the concrete. The document emphasizes the importance of cleaning and treating forms prior to concrete placement.
Modulo_&_Scaleo_Brochure_ENG
FunderMax offers two façade systems, Modulo and Scaleo, that provide panels, mounting systems, and accessories from a single source. Both systems can be installed on wood or aluminum substructures. Modulo allows for a closed, modern look with invisible brackets and narrow joints, while Scaleo provides a traditional lap siding appearance. The façade panels are made of durable, weather-resistant HPL and come in a variety of stock colors and designs.
Company Profile - NEW
- Continental Scaff Fab is a trusted scaffolding manufacturer and supplier that follows quality standards and uses latest production techniques.
- It produces a range of premium scaffolding products including adjustable spans, props, couplers, jacks, and formworks using quality materials.
- The company prioritizes quality control, customer satisfaction, and has manufacturing and distribution networks to deliver products globally.
Company Profile
- Continental Scaff Fab is a trusted scaffolding manufacturer and supplier that follows quality standards and uses latest production techniques.
- It produces a range of premium scaffolding products including adjustable spans, props, couplers, and pins that are widely used in industrial and commercial applications.
- The company prioritizes quality, with rigorous testing of products to ensure total customer satisfaction. It has skilled quality staff and facilities to examine products.
mild steel
Mild steel consists of iron alloyed with less than 0.3% carbon. Mild steel frames are commonly used in building construction as they allow for ductility and malleability. A mild steel frame uses a skeleton structure of vertical steel columns and horizontal beams arranged in a grid pattern to support floors, roofs, and walls. This technique enabled the construction of skyscrapers. Various steel construction materials are discussed, including cuplocks, steel plates, props, acrospans, channels, jacks, joint pins, couplers, mild steel pipes, and steel challis. Their uses, properties, sizes, and specifications are described.
PRECAST BUILDING SYSTEM
The document discusses precast concrete buildings. It begins with an introduction to precast construction and its advantages over conventional construction. It then describes various precast elements like beams, columns, slabs, walls, and connections. It discusses construction methodology, design considerations, cost comparison to cast-in-situ, standards, and provides case studies of precast buildings in India and abroad.
Precast construction
This presentation include the precast construction, precast components , advantages and disadvantages, their connections.
bau-line
YST is a translucent fiberglass reinforced plastic (FRP) sandwich panel created by Rudolf Peter Ammer to show honest material use. It uses a bonded sandwich construction like those used in aerospace for its high strength to weight ratio and resistance to deflection. Each cell wall acts like the web of an I-beam between the facings, forming a strong yet lightweight composite material. YST panels are available in various forms and colors and can be used for applications like interior design elements, furniture, facades, illuminated ceilings, and more.
Place and Fix Reinforcement Materials Intro (2023 Edit).pptx
Steel reinforcement is used to strengthen concrete. Deformed steel bars or welded wire mesh are installed in formwork before pouring concrete. This creates a composite material with increased tensile and shear strength. Reinforcement prevents cracking and failure of concrete under loads. Common reinforcement materials include deformed bars, fabric mesh, and trench mesh configured for specific uses. Proper installation of reinforcement and vapor barriers is important for concrete strength and preventing moisture issues.
Rasto
The RASTO, RASTO XXL, and TAKKO formwork system provides a complete, crane-independent system for constructing small to medium structures. The lightweight panels are easy for two people to handle and install. They are strong yet versatile, allowing for walls, columns, angles, and more to be formed. The system uses connecting clamps and brackets to quickly assemble panels into any needed shape or configuration.
Similar to Tfs range 2019 (20)
All types of insulation material suppliers in Greater Noida
All types of insulation material suppliers in Greater Noida
All types of insulation material suppliers in Greater Noida
All types of insulation material suppliers in Greater Noida
Assignment 2 (techniqes construction of mass building)
Assignment 2 (techniqes construction of mass building)
Speed Floor Melbourne Engineers Presentation & Techinicial Data
Speed Floor Melbourne Engineers Presentation & Techinicial Data
Pre - Engineered Metal Buildings - The Latest Trend In Building construction
Pre - Engineered Metal Buildings - The Latest Trend In Building construction
Pre engineered metal buildings - the latest trend in building construction
Pre engineered metal buildings - the latest trend in building construction
Pre - Engineered Metal Buildings - The Latest Trend In Building construction
Pre - Engineered Metal Buildings - The Latest Trend In Building construction
Place and Fix Reinforcement Materials Intro (2023 Edit).pptx
Place and Fix Reinforcement Materials Intro (2023 Edit).pptx
More from John B
Unibox illuminated display plinth
The illuminated display plinth is an acrylic cube internally illuminated by LEDs that provides even brightness. It is powered by Lumenal and offers single-color white or RGB lighting. The plinths are available in standard and custom sizes and can be arranged individually or together, with a single power supply for multiple units. Graphics or images can be added to customize the plinths for brands or product ranges.
01 unibox brand book
This document provides an overview of Unibox, a company that designs and manufactures modular display and lighting systems. Unibox is based in Manchester, England and has been in business for over 20 years. They work with clients in various industries such as retail, exhibitions, and commercial interiors to create bespoke display and lighting solutions. The document highlights some of Unibox's product offerings and capabilities, including retail displays, exhibition stands, graphic displays, and workspace solutions. It also describes Unibox's modular system that forms the basis of many of its designs and allows for endless configuration possibilities.
Unibox tension fabric system
The document describes a Tension Fabric System (TFS) that is a lightweight graphic display system for exhibitions, events, and retail environments. TFS can be configured in limitless sizes and combinations, and allows for simple installation and removal of fabric graphics. It is versatile and can be freestanding, wall-mounted, or ceiling hung. TFS is suitable for uses like exhibition displays, retail displays, and event graphics.
Unibox showcases nov14
This document describes various modular display products from Unibox including showcases, cabinets, counters, and accessories. It provides details on multiple product lines (Elite, Edge, Icon, Portobello, Blade) that differ in materials and profiles. Dimensions and specifications are given for standard and customizable display units like tower showcases, wall cabinets, and counter displays. The document emphasizes the versatility and bespoke design capabilities of the Unibox modular system for retail, exhibition, and commercial environments.
Unibox retail merchandising units
This document discusses retail merchandising units (RMUs) and kiosks provided by Unibox for commercial display environments. Unibox offers a range of modular and customizable RMUs, kiosks, and counter displays that can be configured to suit individual retailer needs. Their units have increased sales and revenues in major shopping centers across the UK. Potential customers are encouraged to discuss options with the Unibox design team to maximize product display and sales.
Unibox portobello brochure
The Portobello Cabinet Range provides customizable cabinetry for retail displays, exhibitions, and customer service areas. The modular design allows for endless configuration options and various sizes to suit different needs. High-quality materials, precision engineering, and optional security and lighting accessories ensure functionality and attractive design.
Unibox modular display brochure
This document provides an overview of modular display products including tension fabric systems, metro systems, and metrolite systems. It describes various flat and curved freestanding and wall-mounted panel options in different standard sizes. It also outlines accompanying carrying bags and how the graphics are mounted. Special configuration examples are shown at the end.
Unibox metro display brochure
The document describes Metro, a magnetic graphic display and portable counter system for exhibitions, events, and retail environments. It consists of 10 basic structures that can be configured in endless combinations. The kits include all accessories needed to create branded customer experiences and displays. They are portable, robust, and can be adapted through various accessories to stand out or launch new products. The document provides details on individual display stands and counter kits that are part of the Metro system.
Unibox meeting pod brochure
Our modular meeting pod system creates private, customizable meeting spaces with excellent acoustics. The pods are flexible and movable, allowing them to expand with growing needs or be relocated. They feature LED lighting, optional air circulation, and a high level of soundproofing through careful material selection. Customizable exterior graphics and interior accessories provide branding opportunities and storage.
Unibox ledge led lightboxes october2014
The document describes various lightbox products from Unibox including edge lit and back lit lightboxes. It provides details on their LED lighting technology, frame dimensions, power specifications, and applications for exhibition displays, retail displays, and signage. The lightboxes come in various sizes from 22mm to 135mm deep and can illuminate graphics up to 3.5m high and 50m wide. They offer bright, even illumination of tension fabric graphics that can be changed quickly.
Unibox ledge 105 lightbox
The document describes the Ledge 105, a double-sided LED lightbox system for exhibitions, events, and retail environments. It provides edge-lit illumination for tension fabric graphic displays in custom sizes up to 2.25m wide by 3m high. The system offers low energy consumption, uniform lighting, and easy assembly from a flat pack for reduced shipping costs. It can also be used with magnetic accessory holders through an optional Ledge-Fix system.
Unibox flux lightbox range 2
The document describes Flux LED lightboxes, which are illuminated panels for retail and commercial use. They use edge lit technology with a bespoke LED light engine that illuminates a dot-matrix light guide plate for an even distribution of light. Two models are described: the Flux 10, a self-contained 11.5W LED light panel suitable for signage and shelving; and the Flux 18, an all-in-one 38W edge lit solution for illuminated displays with an aluminum frame and clear graphic lens. Both provide bright, even illumination for a variety of applications.
Unibox exhibition brochure
The document describes an exhibition system called the Unibox Exhibition System. It provides a versatile range of modular profiles and accessories that allow users to create stylish and effective exhibition stand solutions. The system includes options for modular stands, tension fabric stands, metro stands, museum displays, bespoke stands, exhibition counters, and various accessories. It aims to provide comprehensive solutions for trade shows, events, and other exhibition environments.
3 d tfs flyer
The 3D Tension Fabric System is a modular graphic display system used in exhibitions, events, retail and conferences. It consists of an aluminum profile with an integrated channel that holds silicone-edged fabric graphics. This allows graphics to stretch across frames and wrap corners seamlessly. A variety of accessories like lighting, literature holders, and foot plates can be added to the system.
3 d tfs fabric spec silicone line
This document provides specifications for calculating fabric sizes for a 3D tension fabric system (3DTFS). It includes formulas for determining the silicone line size and beam/post lengths based on the overall external frame size for different 3DTFS configurations, including square ends to external/internal corners, internal/external 3D to internal/external 3D, and height. The specifications are needed because 3DTFS requires a different approach than standard tension fabric systems. Contact the fabric supplier for their specific formulas.
3 d tfs fabric spec external frame size
The document provides specifications for calculating the external frame size of fabric for a 3D tension fabric system (3DTFS) based on the overall size. It gives formulas for determining the external frame size and beam/post lengths for different 3DTFS configurations, including square ends to external corners, square ends to internal corners, internal 3D to internal 3D, external 3D to external 3D, and external 3D to internal 3D. It also provides contact information for the manufacturer.
Unibox safe vu - issue no. 07
The document describes the Safe-VuScreen protective screen system. It uses rubber fins to firmly hold acrylic or glass panels in place. The screens are made of precision-cut aluminum profiles and can be customized for desks and workspaces. Safe-Vu screens are designed to be flexible, hygienic, and cost-effective solutions that enable social distancing in the workplace. The document provides details on the Fin, Float, and Free screen systems including product codes, dimensions, and configurations.
Unibox alu grip6 - price list - issue no. 02
This document is a price list for AluGrip6 profiles and accessories. It provides product codes, prices, and descriptions for one-way, two-way, three-way, and four-way aluminum profiles in various lengths. Accessory options for each profile type include end caps, base plates, and wall fixing kits. Prices range from £3.50 for end caps to £99 for a 3000mm four-way profile.
Unibox l3 d
The L3D is a hollow cube made of aluminum with integrated LED lighting that projects soft, even light onto its center. It is designed to display products in retail or exhibition spaces, but can also be used for bespoke lighting features. The L3D comes in a wide range of sizes and uses high quality LEDs that accurately show object colors.
More from John B (20)
Recently uploaded
欧洲杯竞猜-欧洲杯竞猜外围竞猜-欧洲杯竞猜竞猜平台|【网址🎉ac123.net🎉】
【网址🎉ac123.net🎉】欧洲杯竞猜是世界上历史最悠久的博彩公司之一。其历史可以追溯到十九世纪末，确切时间是1886年。这家英国公司拥有超过15000名员工，是博彩行业规模最大的公司。欧洲杯竞猜是英国最受欢迎的实体博彩公司之一，其排名仅次于欧洲杯竞猜，旗下2800家投注站遍布全英国。
Cargdor frontal volvo L180E para trabajar en carga de rocas.
Descripción del cargador frontal VOLVO l180E
Kenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
Kenwood touchscreen Bluetooth stereo head unit manual
定制(london学位证书)英国伦敦大学毕业证本科学历原版一模一样
原版定制【微信:bwp0011】《(london学位证书)英国伦敦大学毕业证本科学历》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
欧洲杯足彩-滚球欧洲杯足彩-欧洲杯足彩滚球平台|【网址🎉ac123.net🎉】
【网址🎉ac123.net🎉】欧洲杯足彩是此世界知名网上博彩平台的特点是对英超、英冠以及英国的赛事准确率很高，赔率很少变动。欧洲杯足彩平台的赔率一旦出现变动，其它英国和国外的赛事赔率都会因而出现变动，欧洲杯足彩对业界的影响力可见一斑。
Automotive Engine Valve Manufacturing Plant Project Report.pptx
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
一比一原版(ucb毕业证书)白金汉大学毕业证如何办理
可看样本【微信号:BYZS866】《(ucb毕业证书)白金汉大学毕业证》【微信号:BYZS866】《毕业证、成绩单、外壳、雅思、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【关于学历材料质量】
我们承诺采用的是学校原版纸张（原版纸质、底色、纹路）我们工厂拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有成品以及工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号BYZS866】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号BYZS866】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
美洲杯押注靠谱的软件-美洲杯押注靠谱的软件推荐-美洲杯押注靠谱的软件|【网址🎉ac123.net🎉】
美洲杯押注靠谱的软件成立于1934年，隶属于美洲杯押注靠谱的软件酒店管理集团，有着八十多年的历史，有“博彩公司代言人”的美誉，是全球最具影响的博彩公司之一。美洲杯押注靠谱的软件在英国经营着1500多家投注站，全球客户达30万之众，是全球最大的电话投注服务公司。美洲杯押注靠谱的软件除了直接接收玩家的投注外，还接受其他博彩公司的风险转注，起着博彩业“保险公司”的作用。有玩过线上博彩平台的玩家们，一定对美洲杯押注靠谱的软件绝不陌生。
体育博彩-体育博彩赔率-体育博彩冠军赔率|【网址🎉ac44.net🎉】
【网址🎉ac44.net🎉】体育博彩在体育博彩方面，不难发现，体育博彩多为英式运动提供投注。体育博彩为丰富多彩的体育项目提供投注，如足球、赛马、板球和飞镖，但这不是体育博彩的唯一优势。在体育博彩，全世界玩家都可以找到自己感兴趣的比赛进行投注。体育博彩为网球和美式运动如棒球、美式足球、篮球、冰球开出的投注同样值得关注。在夏季或冬季奥运会方面，体育博彩为玩家开出了丰富多彩的服务，是你的不二之选。你还可以投注水球、自行车和班迪球等小众体育项目，甚至可以为武术、拳击和综合格斗投注。体育博彩为众多体育项目开出滚球投注。
The last lesson in comic form for English art integrated project class 12
English art integrated project class 12 for Ch 1 The Last lesson
一比一原版皇家墨尔本理工大学毕业证(RMIT毕业证书)学历如何办理
学校原版办理【微信号:176555708】【学校原版办理(RMIT毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
按照学校原版(UniSA文凭证书)南澳大学毕业证快速办理
咨询办理【(UniSA毕业证书)南澳大学毕业证】【176555708微信号】未毕业成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
欧洲杯下注-欧洲杯下注下注app-欧洲杯下注盘口app|【网址🎉ac22.net🎉】
【网址🎉ac22.net🎉】欧洲杯下注是爱尔兰的博彩公司，成立于1988年，位于爱尔兰的都柏林。欧洲杯下注通过在爱尔兰和英国的一系列持牌博彩商店以及经营爱尔兰最大的电话博彩服务来开展业务。在互联网上，欧洲杯下注提供体育博彩，在线扑克，在线宾果游戏，在线赌场和在线游戏。
一比一原版南昆士兰大学毕业证(USQ毕业证书)学历如何办理
不能毕业办理【微信号:176555708】【不能毕业办理(USQ毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版悉尼大学毕业证(USYD毕业证书)学历如何办理
精仿办理【微信号:176555708】【精仿办理(USYD毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
car rentals in nassau bahamas | atv rental nassau bahamas
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
世预赛下注-世预赛下注下注平台-世预赛下注投注平台|【网址🎉ac44.net🎉】
【网址🎉ac44.net🎉】世预赛下注是爱尔兰的博彩公司，成立于1988年，位于爱尔兰的都柏林。世预赛下注通过在爱尔兰和英国的一系列持牌博彩商店以及经营爱尔兰最大的电话博彩服务来开展业务。在互联网上，世预赛下注提供体育博彩，在线扑克，在线宾果游戏，在线赌场和在线游戏。
Recently uploaded (20)
Cargdor frontal volvo L180E para trabajar en carga de rocas.
Cargdor frontal volvo L180E para trabajar en carga de rocas.
Kenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
Kenwood DDX71/491/471/371/3108/30718/271/2071 User Manual
Automotive Engine Valve Manufacturing Plant Project Report.pptx
Automotive Engine Valve Manufacturing Plant Project Report.pptx
美洲杯押注靠谱的软件-美洲杯押注靠谱的软件推荐-美洲杯押注靠谱的软件|【网址🎉ac123.net🎉】
美洲杯押注靠谱的软件-美洲杯押注靠谱的软件推荐-美洲杯押注靠谱的软件|【网址🎉ac123.net🎉】
The last lesson in comic form for English art integrated project class 12
The last lesson in comic form for English art integrated project class 12
car rentals in nassau bahamas | atv rental nassau bahamas
car rentals in nassau bahamas | atv rental nassau bahamas
Tfs range 2019
- 1. Tension fabric system profile range Micro TFS Single Sided TFS TFS Lite - New Double Sided TFS Frame can be screwed directly to the wall through the Aluminium profile. Ideal for small/medium sized frames. Minimalistic finish. Slimmest profile available. Frame can be screwed directly to the wall or hung on our wall brackets. Ideal for large frames, or walls which have slight defects. Smooth faced profile. Comes with wall brackets for easy installation. Our latest lightweight profile. Frame can freestand with our TFS feet, or be suspended. Ideal for medium/large sized frames. (max = 3x2.4m) Smooth faced profile. Has accompanying version which allows for screw-in accessories, i.e. feet or eyebolts. Frame can freestand with our TFS feet, or be suspended. Ideal for extra large frames, and structures i.e. exhibition walls and suspended displays. Can be rolled to create curved displays. Has accompanying 90° corner profile to create 3D displays. Unibox is a trading name of United Aluminium Ltd. Unit C2, Greengate Ind Est, Greenside Way, Middleton, Manchester, M24 1SW All frames supplied in a kit of parts for easy transport and assembly. Bespoke cut lengths available on request. All Unibox profiles have a satin silver finish as standard. Optional finishing colours are available upon request. Contact our sales team on 0161 655 2100 or email us sales@unibox.co.uk 3D corner postTFS Lite - with channel UA13190 UA10169 UA28348 UA29278 UA9544