Dampfix EG is an acrylic-based skim coat plaster designed to provide a smooth surface for painting on interior and exterior walls. It controls dampness and salt migration while allowing walls to dry naturally. It sands and applies easily, adheres well to surfaces, and has insulating properties that reduce condensation and mold growth. Dampfix EG is breathable and suitable for renovating damp or salt-contaminated walls.

1. DAMPFIXEG
Product description:
Dampfix EG is a acrylic base breathable pre- blended skim
coat specifically designed to provide a fair faced finish for
rough and uneven substrate prior to application of various
finishes. It can be applied on both, exterior and Interior walls
and ceilings. It has better compatibility with the base plaster
and forms a durable base for paints.
It is also highly effective renovation plaster has a porous
structure which controls salt migration and allows walls to dry
out by evaporation. Suitable for use on salt and damp
contaminated walls and provides enhanced salt protection
compared with competing products.
Benefits :
• Controls dampness & salt migration
• Sands easily to a smooth finish
• Good workability : does not shrink, crack or sag
• Excellent adhesion to porous substrates.
• Insulating properties – warm to the touch
• Reduces condensation on walls & retards mould growth
• Breathable – allows wall to dry naturally
Properties :
Appearance Off-white pest
Size(s) & Packaging 2 / 5 / 30 kgs pail & paper box
Coverage [1]
60-70 Sq.ft. per kg.
Thermal Conductivity 0.2 W/mK
Reaction to Fire Class A1
Breathability µ ≤ 15
Bond strength 0.2 N/mm2
Storage
The products must be stored
in a dry place
Shelf Life
12 months in
unopened packaging
Compressive Strength CS II
Accreditation
BS EN 998-1:2010 Renovation Plaster
Application Information
Preparation :
Substrates must be clean, sound, dust free and free from all traces of
oil and laitance. Traces of mould joints must be leveled. Before the
application the substrate must be sufficiently cured in a way that any
shrinkage has already occurred.
Product Application :
Dampfix EG premix skim coat can be applied between 1 mm
thicknesses in one layer. It is applied using a stainless steel trowel or
stucco blade. Let sit until almost dry. Using a sponge float, float the
material until a fine sand texture is achieved. Sprinkle with water if
necessary for better workability. In hot weather, it is recommended
to moisten the substrate prior the application.
Clean tools with water immediately after use. Ideal application
temperature is between + 5º C and + 35º C. In hot weather.
Other Information :
For health and safety information see the Safety Datasheet
(available upon request).
[1]
Applied in two to three coats of different thicknesses. See Application Information for
full details.
Technical Datasheet Last modified 10/20 1 / 1
©2019 Tobslak India Pvt.Ltd.,SF-221,2nd
Floor, IT Complex, JMD Megapolis,
Sohna Road,Tikri, Gurugram 122018 (HR)
INDIA.
Information given is in good faith based on experience and usage,
however all recommendations are made without warranty or guarantee,
since the conditions of use are beyond our control. All goods are sold in
accordance with our Conditions of Sale, copies of which are available on
request. Customers are advised that products, techniques and codes of
practice are under constant review and changes occur without notice;
please ensure you have the latest updated information.
W: www.tobslak.com
E: ccin@tobslak.com
W:www.tobslak.com