There are positive and negative effects of ecotourism development which none of these two sides can be underestimated. This paper uses a strategic planning method, SWOT analysis, to evaluate the Strengths, Weaknesses, Opportunities, and Threats involved in ecotourism. It involves specifying the objective of sustainable development of ecotourism in two different developing countries, Iran with a focus of Zayandeh Rud River and India, Mulshi Lake and identifying the internal and external impacts that are favorable and unfavorable to achieve that objective. Setting the objective is done after the SWOT analysis has been performed. This would allow achievable goals to be set for government and private sectors in developing countries in order to make a balance through ecotourism development in local areas. This paper is based on 2-year research work and this SWOT is used as a basis for the analysis of ecotourism development along with social and cultural impacts
This is a Project Report which was prepared for an Assignment at National Institute of Business Management. This includes a background study and a macro environmental Analysis of Sri Lankan Tourism Industry.
This is done as the Marketing Management module assinment of BSc. In Business Management (Special) Degree of National Institute of Business Management.
Group Members:
P.D.N.J. Anjana
D.M.M.S Jayakody
K.S.M.Perera
N.G.Pathmanathan
T. Kurubaran
T. Subramaniam
Introduction about sri lankan tourism industrySwan Tours
The principal endeavor to create tourism in Sri Lanka was made by the frontier government preceding the Second World War. The Government Tourist Bureau was set up in1937
This is a Project Report which was prepared for an Assignment at National Institute of Business Management. This includes a background study and a macro environmental Analysis of Sri Lankan Tourism Industry.
This is done as the Marketing Management module assinment of BSc. In Business Management (Special) Degree of National Institute of Business Management.
Group Members:
P.D.N.J. Anjana
D.M.M.S Jayakody
K.S.M.Perera
N.G.Pathmanathan
T. Kurubaran
T. Subramaniam
Introduction about sri lankan tourism industrySwan Tours
The principal endeavor to create tourism in Sri Lanka was made by the frontier government preceding the Second World War. The Government Tourist Bureau was set up in1937
sub-areas
Meaning and definition
Main components of tour guiding
Terminologies Used In Tour Guiding
Understanding tour guide
Position of tour guide in tourism system
Types of tour guide
Roles of tour of guide
A presentation on the various components of Tourism i.e. the 5 A's of tourism which are attraction, accommodation, accessibility, amenities, activities.
In the fast moving developmental world the new form ‘smart tourism’ become more popular globally. The technological advancement and immense use of ICT in tourism directs smart tourism in that direction only, even it has some other dimensions. Although the previous researches defined the term smart tourism, the aspects like destination smartness, tourist and stakeholder’s smartness need to be focused for the better achievement of the goal. Smart tourism also directs towards the innovative use of technology in resource optimisation, sustainability, good governance and quality of life in the tourism industry. This paper defines the smart tourism and its practices in Indian context putting light on tourism trends, information services and the other aspects.
Smart tourism is a rapid growing concept in the developed countries moreover in the developed smart cities. The model of smart city also adopted in India to progress the nation from different aspects. The temple city ‘Bhubaneswar’ achieved number one rank in the smart city project initiated by Govt. of India, also the fastest growing city in eastern coast of India. From the ancient times the city has significant name tourism and in recent years the potentialities growing enormously. The conceptual study focuses on the smart tourism practices in the smart city and importantly the prospects and challenges come in the way of smart tourism also discussed. This paper extends the previous researches on smart tourism and draws attention for further study on smart tourism development and management.
Tourism Resource Potential in Chitrakoot Region A SWOT Analysisijtsrd
Chitrakoot is one of the major tourists' destinations of India not only for Religious Tourism Hinduism since ancient era but also having enough of other tourism potential such as wild life tourism, adventure tourism, wine tourism and Natural tourism. The main purpose of the study is to find out those potentials which are unexplored at the Chitrakoot region of Bundelkhand in Uttar Pradesh and Madhya Pradesh. The type of research is descriptive and exploratory. The study is qualitative in nature. Data was collected through primary and secondary sources. For primary data, open ended questionnaire and opinion method were used. The researcher has done SWOT analysis of the Chitrakoot region in respect to tourism potential. The findings of the study reflected that various tourism potentials existed in the Chitrakoot region. Some suggestion and recommendations have been provided at the end of the study. Ranjit Kumar | Dr. Mohammad Shoaib Khan "Tourism Resource Potential in Chitrakoot Region: A SWOT Analysis" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd47511.pdf Paper URL : https://www.ijtsrd.com/humanities-and-the-arts/tourism/47511/tourism-resource-potential-in-chitrakoot-region-a-swot-analysis/ranjit-kumar
sub-areas
Meaning and definition
Main components of tour guiding
Terminologies Used In Tour Guiding
Understanding tour guide
Position of tour guide in tourism system
Types of tour guide
Roles of tour of guide
A presentation on the various components of Tourism i.e. the 5 A's of tourism which are attraction, accommodation, accessibility, amenities, activities.
In the fast moving developmental world the new form ‘smart tourism’ become more popular globally. The technological advancement and immense use of ICT in tourism directs smart tourism in that direction only, even it has some other dimensions. Although the previous researches defined the term smart tourism, the aspects like destination smartness, tourist and stakeholder’s smartness need to be focused for the better achievement of the goal. Smart tourism also directs towards the innovative use of technology in resource optimisation, sustainability, good governance and quality of life in the tourism industry. This paper defines the smart tourism and its practices in Indian context putting light on tourism trends, information services and the other aspects.
Smart tourism is a rapid growing concept in the developed countries moreover in the developed smart cities. The model of smart city also adopted in India to progress the nation from different aspects. The temple city ‘Bhubaneswar’ achieved number one rank in the smart city project initiated by Govt. of India, also the fastest growing city in eastern coast of India. From the ancient times the city has significant name tourism and in recent years the potentialities growing enormously. The conceptual study focuses on the smart tourism practices in the smart city and importantly the prospects and challenges come in the way of smart tourism also discussed. This paper extends the previous researches on smart tourism and draws attention for further study on smart tourism development and management.
Tourism Resource Potential in Chitrakoot Region A SWOT Analysisijtsrd
Chitrakoot is one of the major tourists' destinations of India not only for Religious Tourism Hinduism since ancient era but also having enough of other tourism potential such as wild life tourism, adventure tourism, wine tourism and Natural tourism. The main purpose of the study is to find out those potentials which are unexplored at the Chitrakoot region of Bundelkhand in Uttar Pradesh and Madhya Pradesh. The type of research is descriptive and exploratory. The study is qualitative in nature. Data was collected through primary and secondary sources. For primary data, open ended questionnaire and opinion method were used. The researcher has done SWOT analysis of the Chitrakoot region in respect to tourism potential. The findings of the study reflected that various tourism potentials existed in the Chitrakoot region. Some suggestion and recommendations have been provided at the end of the study. Ranjit Kumar | Dr. Mohammad Shoaib Khan "Tourism Resource Potential in Chitrakoot Region: A SWOT Analysis" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd47511.pdf Paper URL : https://www.ijtsrd.com/humanities-and-the-arts/tourism/47511/tourism-resource-potential-in-chitrakoot-region-a-swot-analysis/ranjit-kumar
The Civil Services Examination conducted by the Union Public Service Commission (UPSC) is one of the most prestigious and competitive exams in India. Aspirants who wish to pursue a career in the civil services must have a thorough understanding of the UPSC syllabus. This article aims to provide a comprehensive guide to the UPSC syllabus for both the Preliminary and Main examinations.
Impact of destination branding strategy on customer attraction an empirical a...Shishir Chowdhury
It is a dissertation on Tourism Branding Strategy and its impact over tourist places and on the tourists or customers who visits those places situated in Bangladesh.
Green supply chain management in Indian Electronics & Telecommunication IndustryIJESM JOURNAL
The study investigates the Green Supply Chain Management practices adopted by the Electronics & Telecommunication Industry in India. Study focuses on the impact of environmental collaboration in the supply chain on manufacturing and environmental performance. This paper used inductive and qualitative approaches to explore the salient factors that simultaneously enhance the “greening the supply chain” as well as maximizing the customer reach while maintaining the efficiency of the supply chain system of Electronics & Telecommunication Industry. A survey was conducted with key informants across many divisions of the Electronics & Telecommunication Industry to investigate how well these environmental and customer reach in the supply chain are in synchronized with the top management’s commitment towards environmental responsiveness and maximizing customer orientation. The responses to the survey were statistically analyzed and a relationship model was constructed with Market orientation as the dependent variable and independent variables as: environmental policies, supplier policies, commitment to human capital and diversity, sustainability and market orientation. The paper proposes to measure the performance of the corporation with respect to greening the supply chain, maximizing the reach of consumers and operational efficiency with a view of re-engineering the existing supply chain. The key indicators identified were environmental policies, supplier policies, sustainability, market orientation and commitment to human capital and diversity.
● An Analysis of Urban Vacant Land on the Macau Peninsula
https://ojs.bilpublishing.com/index.php/jgr/article/view/4595
● Analysis of Chinese Citizens’ Perception and Its Differences of City Spirit: A Case Study of Hefei City
https://ojs.bilpublishing.com/index.php/jgr/article/view/4788
● The Use of Airborne LiDAR in Assessing Coastal Erosion in the Southeastern USA
https://ojs.bilpublishing.com/index.php/jgr/article/view/4762
● Spatial-temporal Evolution and Its Influencing Factors of Tourism Eco-efficiency in China
https://ojs.bilpublishing.com/index.php/jgr/article/view/4688
● Comparative Assessment of Heavy Metals Pollution in Surface Water in Ikoli River and Epie Creek in Yenagoa Metropolis Using Geographical Information System https://ojs.bilpublishing.com/index.php/jgr/article/view/4696
Vibgyor a sustainability assessment tool for residential buildingeSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
An Application of Logit Regression on Socio Economic Indicators in Gujaratijtsrd
The use of real time evaluation technologies to think about human behavior in a social setting is known as social experiences. This can be refined by examining a social gathering of individuals, reviewing a subset of data insights, and assessing a large amount of data relating to people and their behavior in a quantitative manner. In this study researcher examined Socio Economics indicators like Education, Health and Employment in Gujarat he also used Logit Regression as a statistical tool. It will be found that the most of the Sub Indicators are positively impact on Logit Regression model. Dr. Mahesh Vaghela "An Application of Logit Regression on Socio Economic Indicators in Gujarat" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021, URL: https://www.ijtsrd.compapers/ijtsrd42573.pdf Paper URL: https://www.ijtsrd.comother-scientific-research-area/other/42573/an-application-of-logit-regression-on-socio-economic-indicators-in-gujarat/dr-mahesh-vaghela
The article discusses the methodological approaches to assessing the socioeconomic
development of the region. Methodical approaches to the formation of
economic and social programs, as a tool for strategic management of the region’s
development, should be adequate to its goals, taking into account regional
peculiarities, and first of all, aimed at solving specific problems relevant to a particular
region.
A Study on Importance of Guidance and Counseling Services in Secondary School...ijtsrd
The researcher found it necessary to establish the role of guidance and counseling. The findings are illustrated in table. Guidance and counseling services are essential elements in discipline management of people in all societies. This paper reviews the guidance and counseling at schools across the India. “The Guidance programmed assumes a lot of importance for secondary schools as the Indian society is undergoing rapid change, socially as well as economically coupled with the changes in the values and life style of people”. Consequently round pegs are inserted in square holes and square pegs at round holes, resulting in wastage of human services. Due to this reason it is therefore necessary to have well organized guidance program to remove the defect. Society itself and its demand are continuously changing and becoming more and more complex and without any guidance program it is not possible for a child to cope with the changing society. P. Merlin Jenita | Mrs. R. Vaishnavi "A Study on Importance of Guidance and Counseling Services in Secondary School Students at Thanjavur District" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-4 , June 2022, URL: https://www.ijtsrd.com/papers/ijtsrd49952.pdf Paper URL: https://www.ijtsrd.com/other-scientific-research-area/other/49952/a-study-on-importance-of-guidance-and-counseling-services-in-secondary-school-students-at-thanjavur-district/p-merlin-jenita
Gateway community resident perceptions of tourism development: Incorporating ...ibrahimzubairu2003
Gateway community resident perceptions of tourism development: Incorporating Importance Performance Analysis into a Limit of Acceptable Change framework
BY ( ERIC FRAUMAN AND SARAH BANKS).
Gateway community resident perceptions of tourism development: Incorporating ...ibrahimzubairu2003
Gateway community resident perceptions of tourism development: Incorporating Importance Performance Analysis into a Limit of Acceptable Change framework
BY ( ERIC FRAUMAN AND SARAH BANKS).
Chau Thanh District, Hau Giang Province, has diverse tourism resources. The local authority has
been orienting the tourism industry as an important economic sector. However, tourism-oriented products have
not been determined yet. The tourism resource exploitation is not commensurate with the potentials and
advantages of the district. This study focuses on assessing tourism resources and tourism development
potentials, thereby proposing solutions to exploit the tourism potentials of Chau Thanh District, Hau Giang
Province.
Similar to SWOT Analysis and Strategic Sustainable Development of Ecotourism in Developing Countries (20)
SEMI-PARAMETRIC ESTIMATION OF Px,y({(x,y)/x >y}) FOR THE POWER FUNCTION DISTR...IJESM JOURNAL
The stress-strength model describes the life of a component which has a random strength X and is subjected to random stress Y, in the context of reliability. The component will function satisfactorily whenever X>Y and it fails at the instant the stress applied to it exceeds the strength. R=P(Y<X) is a measure of component reliability .In this paper, we obtain semi parametric estimators of the reliability under stress- strength model for the Power function distribution under complete and censored samples. We illustrate the performance of the estimators using a simulation study.
Comparative study of Terminating Newton Iterations: in Solving ODEsIJESM JOURNAL
The paper deals with the numerical solution of IVP’s for systems of stiff ODE’s with particular emphasis on implicit linear multistep methods (LMM), particularly the backward differentiation formulae (BDF). In thispaper we investigate the current strategies that are used to terminate the Newton iterations in the Matlab Code ode15s.We analyse the algorithms for terminating the Newton iterations as implemented in the code ode15s. We conductnumerical experiments to investigate the levels of usage of each strategy in solving various test problems. The experiments reveal the displacement test is oftenmore stringent that other termination strategies
ON HOMOGENEOUS TERNARY QUADRATIC DIOPHANTINE EQUATIONIJESM JOURNAL
The ternary quadratic homogeneous equation representing homogeneous cone given by
2 2 2 2 x y 3xy 16z is analyzed for its non-zero distinct integer points on it. Three different
patterns of integer points satisfying the cone under consideration are obtained. A few interesting
relations between the solutions and special number patterns namely Polygonal number,
Pyramidal number, Centered Polygonal number, Centered Pyramidal number, pronic number and
Star number are presented.
HOMOGENOUS BI-QUADRATIC WITH FIVE UNKNOWNSIJESM JOURNAL
We obtain non-trivial integral solutions for the Homogeneous Bi-quadratic with five unknowns’
4 4 2 2 2 x y 26 z w T . A few interesting relations for each pattern among the solutions are
presented.
STUDY OF RECESSIONAL PATTERN OF GLACIERS OF DHAULIGANGA VALLEY, UTTRAKHAND, I...IJESM JOURNAL
The glacier study is important in the sense that it has a very direct relation with climate change. Any change in the climate can be read through glacier response. A number of Himalayan glaciers are reported to be shrinking. The retreat of Chipa glacier and Jhulang glacier in Dhauliganga valley was studied by interpreting time series optical satellite images obtained from Landsat, ASTER and IRS LISS III sensors. The change of terminus position was measured and retreat was monitored with respect to the terminus position in a topographical map (1:50,000) of 1962. The satellite data of 1989 and from 2000 to 2004 and 2012 were used for monitoring the retreat of the glacier and the result was compared with the field measured values.
The purpose of this paper is to evaluate the contributions of Total Productive Maintenance (TPM) initiatives in reducing equipment breakdowns, increase equipment reliability and improve productivity. This will result in increased equipment utilization and life, reduced work stoppages and machine slowdowns, closer adherence to production and delivery schedules as well as increased employee morale. The Total Productive Maintenance (TPM) concept addresses these goals. The aim of TPM is to keep the plant and equipment at its highest productive level through the cooperation of all areas of the organization. TPM is a partnership between maintenance and production organization to improve product quality, reduce waste, reduce manufacturing cost and increase equipment availability.
DIFFERENTIAL OPERATORS AND STABILITY ANALYSIS OF THE WAGE FUNCTIONIJESM JOURNAL
In this paper, a differential operator has been used to solve the wage equation. The subsequent wage function is analyzed and interpreted for stability. The equation incorporates speculative parameters operating in free range. The variations of these parameters have caused stability and instability of the wage function in certain circumstances. Where the wage function is exponential, asymptotic stability towards the equilibrium wage rate is observed but where it consists of both exponential and periodic factors, the time path shows periodic fluctuations with successive cycles giving smaller amplitudes until the ripples dies naturally. It is also observed that though differential operator is just as effective as variation of parameters demonstrated in [6], it is rather simple and fast with limited algebra.
Vocal Translation For Muteness People Using Speech SynthesizerIJESM JOURNAL
The research perform has enabled a mute man can speak without surgery. An electrode placed on the neck to get the vibration from blabbering voice of the person and also implement the special speech synthesizer for producing him vowels. It possible for the disable person to produce vowels by thinking of them, using a speech synthesizer. In the future, this breakthrough may help erase the word of speech disability.
BER Performance Analysis of Open and Closed Loop Power Control in LTEIJESM JOURNAL
The power control (PC) policy in Long Term Evolution (LTE) network is important issue, the interference of cell user to neighbour cell is consider to avoid any annoying to close cells. In this paper the two uplink PC scheme close loop power control (CLPC) and open loop power control (OLPC) are modelled in order to investigate the effects of Mobile cell edge to another cell and show how to adjust the user power according to two path losses. The algorithms were simulated by using MATLAB program. The open loop technique considered that the strongest interference is caused by mobile to neighbour cell, while the power control components is adjusted continuously in the close loop technique . The effects of CLPC and OLPC are shown in term of throughput, path loss, power spectrum density (PSD) and the bit error rate (BER). Results shows that the CLPC is outperform the OLPC in term of throughput, PSD and path loss; while they are perform similarly in term of BER.
Rainfall Trends and Variability in Tamil Nadu (1983 - 2012): Indicator of Cli...IJESM JOURNAL
Rainfall trend for the past is very essential to understand the climate variability of a region and it is very significant research in developing countries. Rainfall variability is also an obligatory factor for the climate of semi arid and tropical regions. The number of rainy days and rainfall intensity are the vital feature to comprehend the climate vulnerability of a region. To attain the nature of climate variability this paper deals the rainfall trends of Tamil nadu for the past 30 years and investigated using spatial, temporal and statistical techniques. The previous woks also revealed that the rainfall variability across the world. The results are also showing the spatial and temporal variability across Tamil Nadu and the climate change projection in study area.
The Political, Legal & Technological Environment in Global ScenarioIJESM JOURNAL
The environment that international managers face is changing rapidly. The past is proving to be a poor indicator of what will happen in the future. Changes are not only more common now but also more significant than ever before, and these dramatic forces of change are creating new challenges. Although there are many dimensions in this new environment, most relevant to international management would be the economic environment that was covered in the research and the cultural environment. Also important are the political, legal and regulatory, and technological dimensions of the environment. The objective of this research is to examine how the political, legal and regulatory, and technological environments have changed in recent years. Some major trends in each that will help dictate the world in which international managers will compete also are presented.
SUPPLIER SELECTION AND EVALUATION – AN INTEGRATED APPROACH OF QFD & AHPIJESM JOURNAL
In current scenario strong competitive pressure forces several organizations to available their products and services, cheaper, faster and improved than the rivals to their valuable customer. Managers have come to comprehend that they cannot do it individually without suitable vendors. Supply Chain Management empower the flows of material, information and funds in a association consisting of customers, suppliers, manufacturers and distributors, which beings raw materials, maintain by internal operations complete with distribution of finished goods. In the continually changing world, assortment of appropriate vender is facilitating in supply chain management, selection of right vendor is extremely useful part of purchasing department. This paper seeks to propose a methodology to integrate the Analytical Hierarchy Process (AHP) for right supplier selection and evaluation and Quality Function Deployment (QFD) analysis to enhance the effectiveness of outsourcing decisions. A selection that combines the subjective factors and objective factors and attitude of the decision maker decide the best supplier in the supply chain management system. The proposed integrated model could be used for supplier selection, which involves several quantitative and qualitative factors. Also could be used to determining the optimum order quantity. The propose method is a group decision making approach which shadows the traditional approaches of supplier selection.
FURTHER CHARACTERIZATIONS AND SOME APPLICATIONS OF UPPER AND LOWER WEAKLY QUA...IJESM JOURNAL
In his paper we characterize upper and lower weakly quasi continuous fuzzy multifunction’s [3] be a new type of convergence of a net in a topological space and also characterize lower weakly quasi continuous fuzzy multifunction by a newly defined convergence of a fuzzy net. Again a new concept of regularity in a topological space has been introduced and characterized and using this regularity several applications of upper weakly quasi continuous fuzzy multifunctions have been shown.
INVARIANCE OF SEPARATION AXIOMS IN ISOTONIC SPACES WITH RESPECT TO PERFECT MA...IJESM JOURNAL
The behavior of separation axioms under perfect mappings has been studied in the realm of topological spaces. In this paper, we extend the characterization of perfect mappings to isotonic spaces and then use this class of continuous functions to investigate the behavior of separation axioms.The hierarchy of separation axioms that is familiar from topological spaces generalizes to spaces with an isotone and expansive closure functions. Neither additivity nor idempotence of the closure function need to be assumed.
MATHEMATICAL MODELLING OF POWER OUTPUT IN A WIND ENERGY CONVERSION SYSTEMIJESM JOURNAL
The developments of wind energy systems have enabled an efficient production and use of wind energy. Three widely used control schemes for wind energy systems are Pitch control, Rotor resistance control and Vector control. A traditional wind energy system consists of a stall regulated or pitch control turbine connected to a synchronous generator through gearbox. The synchronous generator operates at fixed speed and one of the earliest rotor control schemes was the rotor resistance control. The speed of an induction machine is controlled by the external resistance in the rotor circuit. The drawback of the above methods is the inability of wind turbine to capture at low wind speeds. This paper develops a model which maximizes wind energy output. This model asses the effects of friction coefficient and the height of wind above ground(given by the height of turbine from the ground i. e the hub height) on power output. The study considers an already existing model, that is the turbine model in which the study incorporates height and friction coefficient. The three methods used in wind energy systems and the output variations for the different control techniques for a change in the input wind velocity and a constant desired power output reference are compared and the methods evaluated based on the response time and the magnitude of change in the power output compared to the desired power output and also compared by simulation. The results of this study may be useful in aiding in the efficient production of electricity in a wind energy conversion system.
INTRODUCING AN INTEGRATING FACTOR IN STUDYING THE WAGE EQUATIONIJESM JOURNAL
In this paper a first order wage equation is solved by the method of integrating factor. The subsequent wage function is then analyzed and interpreted for stability. The function could initially stand off the equilibrium wage rate but in the long run, it asymptotically stabilizes in inter temporal sense. It is observed that use of an integrating factor in solving the wage equation is just as effective as Laplace transforms demonstrated in [6] but with an advantage of being simple with limited algebra.
Vocal Translation For Muteness People Using Speech SynthesizerIJESM JOURNAL
The research perform has enabled a mute man can speak without surgery. An electrode placed on the neck to get the vibration from blabbering voice of the person and also implement the special speech synthesizer for producing him vowels. It possible for the disable person to produce vowels by thinking of them, using a speech synthesizer. In the future, this breakthrough may help erase the word of speech disability.
ANALYTICAL STUDY OF WAVE MOTION OF A FALLING LIQUID FILM PAST A VERTICAL PLATEIJESM JOURNAL
In this article, the existence of gravity-capillary waves travelling down the surface of a falling liquid film past a vertical plate has been considered. Kapitza’s scheme of finding an approximate expression of velocity u when the film surface assumes an arbitrary shape y = h(x, t), which changes with time, has been emphasized. The expressions for dimensionless wavelength, dimensionless wave number and Weber number have been obtained and are computed for an admissible range of the wave celerity. The stream line pattern has also been studied and presented through graphs.
APPLICATION OF THE METHOD OF VARIATION OF PARAMETERS: MATHEMATICAL MODEL FOR ...IJESM JOURNAL
In this paper, a second order wage equation is developed and solved by the method of variation of parameters. The subsequent wage function is then analyzed and interpreted for stability. Speculative parameters, which operate freely dictating employers’ expectations, are included in modeling this equation. The variation of these parameters causes both stability and instability of the wage function depending on circumstances. Where the wage function is exponential, asymptotic stability towards the equilibrium wage rate is observed but where it consists of both exponential and periodic factors, the time path shows periodic fluctuations with successive cycles giving smaller amplitudes until the ripples die naturally. It has been realized that where the wage rate is determined by free market forces of demand and supply, volatility in wage rate may be observed if not controlled. This may increase uncertainties and cause anxiety about investment and employment in the economy. The paper therefore proposes government intervention by creating a middle path in which wage rate is allowed to oscillate freely within a narrow band managed by employers in consultation with the workers under the watch of the government.
Ab Initio Study of Pressure Induced Structural, Magnetic and Electronic Prope...IJESM JOURNAL
We have investigated the pressure induced structural and electronic properties of plutonium pnictides (PuY, Y= P, As, Sb). The total energy as a function of volume is obtained by means of self-consistent tight binding linear muffin-in-orbital (TB-LMTO) method within the local spin density approximation (LSDA). From present study with the help of total energy calculations (spin polarized) it is found that PuP, PuAs and PuSb are stable in NaCl – type structure under ambient pressure. The structural stability of PuP, PuAs and PuSb changes under the application of pressure. We predict a structural phase transition from NaCl-type (B1-phase) to CsCl-type (B2-phase) structure for these Pu-pnictides in the pressure range of 20.8 – 42.0 GPa. We also calculate the lattice parameter, bulk modulus, band structure and density of states. From energy band diagram it is observed that all the three compounds exhibit metallic behaviour. The calculated equilibrium lattice parameters and bulk modulus are in good agreement with available experimental data.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024