Study on different types of finishing defects in garments industry. it's a project. This project learn more about finishing section. By this project we learn about various types of finishing faults and their remedies. In finishing section we see finishing faults like Unwanted marks on fabric, Missed zipper teeth, Damage Label, Button Threads Missing ,Pin holes, Water spots etc. We hope this project on finishing faults & their remedies will help us very much in our future career.

1. Welcome
To Our
Presentation
Project Title:
Study on different types of finishing defects in
garments industry

2. Process Flow Chart of Garment Finishing

3. Finishing faults
Missed zipper teeth
Unwanted marks on fabric

4. Damage Label
Button Threads Missing

5. Button Alignment out
Wrong Size Label

6. Damage Button
Drop stitch/Skipped stitch

7. Stains
Uncut/ loose thread

8. White lines on finishing cloth
Pin holes

9. Iron Spot
Wet Squeezer Marks

10. Crease/Wrinkle Mark
Broken Stitch

11. Water Spots
Oil Spot

12. Open Seam
Uneven Side Seam

13. Inseam Variation
Frame Mark at Logo

14. Pie Chart of finishing Faults
Analysis of Finishing Faults Found in 1st Day
 This day total checked garments 10,870 pieces and total
quality pass 10,420 pieces.
 This day, total alter 156 pieces of total garments and 35%
of total faults.
 Total spot 168 pieces of total garments and 37% of total
faults.
 Total shade 21 pieces of total garments and 5% of total
faults.
 Total foreign yarn 87 pieces of total garments and 19% 0f
total faults.
 Total reject 18 pieces total garments and 4% of total faults.
 Total Faults Occur in Finishing = 450 Pieces.

16. Analysis of Finishing Faults Found in 2nd Day
 This day total checked garments 6861 pieces and total
quality pass 6550 pieces.
 Total alter 81 pieces of total garments and 26% of total
faults.
 Total spot 118 pieces of total garments and 38% of total
faults.
 Total Shade 6 pieces of total garments and 2% of total
faults.
 Total foreign yarn 94 pieces of total garments and 31% of
total faults.
 Total reject 10 pieces total garments and 3% of total faults.
 Total Finishing Faults Occur = 311 Pieces

18. Analysis of Finishing Faults Found in 3rd Day
 This day total checked garments 6645 pieces and
total quality pass 6370 pieces.
 Total alter 105 pieces of total garments and 38%
of total faults.
 Total spot 101 pieces total garments and 37% of
total faults.
 Total shade 4 pieces of total garments and 1% of
total faults.
 Total foreign yarn 55 pieces of total garments and
20% of total faults.
 Total reject 10 pieces total garments and 4% of
total faults.
 Total Finishing Faults Occur = 275 Pieces

20. Discussion of Results

21. Average Finishing Faults Found in 7 Days
 Total garments inspection 57,070 pieces for 7 days. We see on
seven days. total quality pass 54,353 pieces.
 Alter 809 pieces of the total garments and 30% of the total
faults.
 Spot 1316 pieces of the total garments and 48% of the total
faults.
 shade 148 pieces of the total garments and 5% of the total
faults.
 Foreign yarn 316 pieces of the total garments and 12% of the
total faults.
 Reject 143 pieces of the total garments and 5% of the total
faults.
So, these seven days, spot is highest faults and shade is lowest
faults.
Total Finishing Faults Occur in seven days 2717 Pieces.
12%
Foreign Yarn
30%
Alter
5%
Shade
5%
Reject
Spot
Foreign Yarn
Alter
Shade
Reject
5% reject
48% Sport
5% Shade

22. Investigation Report of defect caused by Finishing
Day Lot size No. of Fault Fault % Total Pass
Day-1 10,870 pieces 450 pieces 4 .14 % 10,420 pieces
Day-2 6861 pieces 311 pieces 4.53 % 6550 pieces
Day-3 6645 pieces 275 pieces 4 .14 % 6370 pieces
Day-4 11,318 pieces 618 pieces 5.46 % 10,700 pieces
Day-5 6288 pieces 328 pieces 5.22 % 5960 pieces
Day-6 8397 pieces 417 pieces 4.97 % 7980 pieces
Day-7 6691 pieces 318 pieces 4.75 % 6373pieces
Total 57,070 pieces 2717 pieces 4.76 % 54,353 pieces

23. Conclusion
 This project learn more about finishing section. By this project we learn
about various types of finishing faults and their remedies. In finishing section
we see finishing faults like Unwanted marks on fabric, Missed zipper teeth,
Damage Label, Button Threads Missing ,Pin holes, Water spots etc. We hope
this project on finishing faults & their remedies will help us very much in our
future career.

24. Thank You