The document repeatedly states that this book is a dedication to the author's friends in Halcrow and Ahmed Fakhr. It consists of the same two sentences repeated over 200 times.
MODIFICATION OF THE CASAGRANDE'S EQUATION OF PHREATIC LINE IAEME Publication
The purpose of the present paper is to carry out the seepage analysis for a model to derive the equation of the phreatic line experimentally and thereafter proposing the best solution to trace the line. Sandy silt is used as a base material for this case. Phreatic Line for the model is plotted by carrying out 3 iterations each for two cases, that is, earthen dam without filter and with filter. Their corresponding phreatic line curves are traced on the butter paper on one of the longer side of the
model. Plastic channel sections are used to contain the model sealing it air tight with the use of mseal and rubber stoppers.
This document provides information about a cultural forum called "Iqra Cultural Forum" and how to prepare for reading and discussion. It includes the forum's website, Facebook page, and a link to access materials for preparation.
يقاس مدى نجاح الرسومات التنفيذية بمدى كون طريقة التنفيذ الموضحة بالرسومات قابلة للتحقيق، وبمدى ملائمة خامات التنفيذ المحددة بالرسومات لوظيفة المبنى بعناصره المعمارية المختلفة، وبمدى مراعاة خامات التنفيذ لعنصر الإقتصاد، وللنواحي المناخية، والنواحي الجمالية. ورغبة في تحقيق ما سبق، فقد تم- بفضل الله تعالى وتوفيقه- تأليف هذا الكتاب ليكون المنهج الدراسي لمادة التصميمات التنفيذية لطلبة السنة الدراسية الثالثة بقسم العمارة والتي يتم تدريسهاعلى مدار فصلين دراسيين لطلبة السنة الثالثة. إلا أن المعلومات التي يحتويها الكتاب مهمة لطلبة العمارة في كل السنوات الدراسية، وللمهندسين المعماريين أيضاً. الكتاب مقسم إلى أبواب حسب اللوحات المطلوبة في الرسومات التنفيذية. في كل لوحة يتم شرح تعريف باللوحة، وأهميتها أو الهدف منها، والمعلومات المطلوب وجودها باللوحة، والبيانات المطلوب إدراجها في كل لوحة. كما يشمل شرح للاعتبارات المطلوب مراعاتها في كل لوحة والمعلومات الهندسية المطلوب الإطلاع عليها قبل التفكير في رسم اللوحة كما يشتمل في نهاية كل باب على مصطلحات رسم اللوحة، ومثال تطبيقي للوحة المطلوبة، وروعي فيه أن يعتمد المهندس (أو الطالب) على كتاب واحد فقط يجمع كل البيانات الأساسية المطلوب معرفتها ( على قدر المستطاع) بدلاً من اللجوء لمراجع متعددة عند رسم كل لوحة.يقاس مدى نجاح الرسومات التنفيذية بمدى كون طريقة التنفيذ الموضحة بالرسومات قابلة للتحقيق، وبمدى ملائمة خامات التنفيذ المحددة بالرسومات لوظيفة المبنى بعناصره المعمارية المختلفة، وبمدى مراعاة خامات التنفيذ لعنصر الإقتصاد، وللنواحي المناخية، والنواحي الجمالية. ورغبة في تحقيق ما سبق، فقد تم- بفضل الله تعالى وتوفيقه- تأليف هذا الكتاب ليكون المنهج الدراسي لمادة التصميمات التنفيذية لطلبة السنة الدراسية الثالثة بقسم العمارة والتي يتم تدريسهاعلى مدار فصلين دراسيين لطلبة السنة الثالثة. إلا أن المعلومات التي يحتويها الكتاب مهمة لطلبة العمارة في كل السنوات الدراسية، وللمهندسين المعماريين أيضاً. الكتاب مقسم إلى أبواب حسب اللوحات المطلوبة في الرسومات التنفيذية. في كل لوحة يتم شرح تعريف باللوحة، وأهميتها أو الهدف منها، والمعلومات المطلوب وجودها باللوحة، والبيانات المطلوب إدراجها في كل لوحة. كما يشمل شرح للاعتبارات المطلوب مراعاتها في كل لوحة والمعلومات الهندسية المطلوب الإطلاع عليها قبل التفكير في رسم اللوحة كما يشتمل في نهاية كل باب على مصطلحات رسم اللوحة، ومثال تطبيقي للوحة المطلوبة، وروعي فيه أن يعتمد المهندس (أو الطالب) على كتاب واحد فقط يجمع كل البيانات الأساسية المطلوب معرفتها ( على قدر المستطاع) بدلاً من اللجوء لمراجع متعددة عند رسم كل لوحة.
Gravity Dam (numerical problem ) BY SITARAM SAINISitaramSaini11
The document discusses the analysis of a gravity dam, including calculating stresses and checking stability, for both an empty reservoir and full reservoir condition. It provides numerical examples of determining vertical stresses, principal stresses, and shear stresses at the toe and heel of the dam. It also shows calculations for checking the stability of the dam against sliding, overturning, tension and sufficient shear resistance.
The document repeatedly states that this book is a dedication to the author's friends in Halcrow and Ahmed Fakhr. It consists of the same two sentences repeated over 200 times.
MODIFICATION OF THE CASAGRANDE'S EQUATION OF PHREATIC LINE IAEME Publication
The purpose of the present paper is to carry out the seepage analysis for a model to derive the equation of the phreatic line experimentally and thereafter proposing the best solution to trace the line. Sandy silt is used as a base material for this case. Phreatic Line for the model is plotted by carrying out 3 iterations each for two cases, that is, earthen dam without filter and with filter. Their corresponding phreatic line curves are traced on the butter paper on one of the longer side of the
model. Plastic channel sections are used to contain the model sealing it air tight with the use of mseal and rubber stoppers.
This document provides information about a cultural forum called "Iqra Cultural Forum" and how to prepare for reading and discussion. It includes the forum's website, Facebook page, and a link to access materials for preparation.
يقاس مدى نجاح الرسومات التنفيذية بمدى كون طريقة التنفيذ الموضحة بالرسومات قابلة للتحقيق، وبمدى ملائمة خامات التنفيذ المحددة بالرسومات لوظيفة المبنى بعناصره المعمارية المختلفة، وبمدى مراعاة خامات التنفيذ لعنصر الإقتصاد، وللنواحي المناخية، والنواحي الجمالية. ورغبة في تحقيق ما سبق، فقد تم- بفضل الله تعالى وتوفيقه- تأليف هذا الكتاب ليكون المنهج الدراسي لمادة التصميمات التنفيذية لطلبة السنة الدراسية الثالثة بقسم العمارة والتي يتم تدريسهاعلى مدار فصلين دراسيين لطلبة السنة الثالثة. إلا أن المعلومات التي يحتويها الكتاب مهمة لطلبة العمارة في كل السنوات الدراسية، وللمهندسين المعماريين أيضاً. الكتاب مقسم إلى أبواب حسب اللوحات المطلوبة في الرسومات التنفيذية. في كل لوحة يتم شرح تعريف باللوحة، وأهميتها أو الهدف منها، والمعلومات المطلوب وجودها باللوحة، والبيانات المطلوب إدراجها في كل لوحة. كما يشمل شرح للاعتبارات المطلوب مراعاتها في كل لوحة والمعلومات الهندسية المطلوب الإطلاع عليها قبل التفكير في رسم اللوحة كما يشتمل في نهاية كل باب على مصطلحات رسم اللوحة، ومثال تطبيقي للوحة المطلوبة، وروعي فيه أن يعتمد المهندس (أو الطالب) على كتاب واحد فقط يجمع كل البيانات الأساسية المطلوب معرفتها ( على قدر المستطاع) بدلاً من اللجوء لمراجع متعددة عند رسم كل لوحة.يقاس مدى نجاح الرسومات التنفيذية بمدى كون طريقة التنفيذ الموضحة بالرسومات قابلة للتحقيق، وبمدى ملائمة خامات التنفيذ المحددة بالرسومات لوظيفة المبنى بعناصره المعمارية المختلفة، وبمدى مراعاة خامات التنفيذ لعنصر الإقتصاد، وللنواحي المناخية، والنواحي الجمالية. ورغبة في تحقيق ما سبق، فقد تم- بفضل الله تعالى وتوفيقه- تأليف هذا الكتاب ليكون المنهج الدراسي لمادة التصميمات التنفيذية لطلبة السنة الدراسية الثالثة بقسم العمارة والتي يتم تدريسهاعلى مدار فصلين دراسيين لطلبة السنة الثالثة. إلا أن المعلومات التي يحتويها الكتاب مهمة لطلبة العمارة في كل السنوات الدراسية، وللمهندسين المعماريين أيضاً. الكتاب مقسم إلى أبواب حسب اللوحات المطلوبة في الرسومات التنفيذية. في كل لوحة يتم شرح تعريف باللوحة، وأهميتها أو الهدف منها، والمعلومات المطلوب وجودها باللوحة، والبيانات المطلوب إدراجها في كل لوحة. كما يشمل شرح للاعتبارات المطلوب مراعاتها في كل لوحة والمعلومات الهندسية المطلوب الإطلاع عليها قبل التفكير في رسم اللوحة كما يشتمل في نهاية كل باب على مصطلحات رسم اللوحة، ومثال تطبيقي للوحة المطلوبة، وروعي فيه أن يعتمد المهندس (أو الطالب) على كتاب واحد فقط يجمع كل البيانات الأساسية المطلوب معرفتها ( على قدر المستطاع) بدلاً من اللجوء لمراجع متعددة عند رسم كل لوحة.
Gravity Dam (numerical problem ) BY SITARAM SAINISitaramSaini11
The document discusses the analysis of a gravity dam, including calculating stresses and checking stability, for both an empty reservoir and full reservoir condition. It provides numerical examples of determining vertical stresses, principal stresses, and shear stresses at the toe and heel of the dam. It also shows calculations for checking the stability of the dam against sliding, overturning, tension and sufficient shear resistance.
This document provides guidance on rock slope design for the Ohio Department of Transportation. It discusses topics such as geological data collection and testing methods. Section 200 defines important geological terms and describes planning an exploration program to collect data through surface mapping, borings, and laboratory testing. This data is used to characterize the rock mass and discontinuities, along with groundwater conditions. The guidance aims to provide information needed for designing stable, safe rock slopes in transportation projects.
The document discusses different types of reservoirs and their purposes. It describes storage/conservation reservoirs which retain excess water supplies during high flows for gradual release during low flows. Flood control reservoirs store flood waters to minimize downstream flood peaks. Multipurpose reservoirs serve multiple functions like water supply, flood control, power generation, and irrigation. Distribution reservoirs supply water to consumers according to demand fluctuations and provide local storage in emergencies.
This document contains a lecture on environmental engineering topics. It discusses wastewater flow rate equations and constants. It also lists wastewater characteristics and factors that affect wastewater flow. The lecture covers wastewater treatment methods and design considerations.
الفصل الأول - مقدمة في الخرسانة المسلحة - تصميم المنشآت الخرسانية المسلحةAhmed Gamal Abdel Gawad
حل أمثلة الفصل الأول :
https://www.mediafire.com/?krb5ubl78obirna
المحاضرة الأولى : مقدمة في الخرسانة المسلحة
http://youtu.be/f5-kOqI3yGQ
المحاضرة الثانية : حديد التسليح
http://youtu.be/Y1ikllWCgIU
المحاضرة الثالثة : أنظمة الوحدات وطرق ومتطلبات التصميم
http://youtu.be/QiDRIFP0Ias
م. أحمد جمال عبد الجواد
Rocks are used in various purpose like building material, in foundation, as railway ballast,in dam etc. That's why careful studies bring out the inherent advantage and disadvantage of a site and such studies go a long way either in reducing or in increasing the cost of the structure.
This document discusses torsional irregularity in multi-story structures. It presents a parametric investigation of torsional irregularity coefficients and floor rotations in six groups of typical structures with varying numbers of stories and positions of structural walls. The study finds that torsional irregularity coefficients increase as the number of stories decreases, reaching a maximum for single-story structures when walls are placed closest to the center of gravity. Meanwhile, floor rotations increase proportionally with the number of stories, attaining maximum values when walls are farthest from the center of gravity. However, the results for torsional irregularity coefficients and floor rotations are found to be contradictory. Therefore, the study proposes a new definition for the torsional irregular
This document discusses the Wood-Armer method for designing reinforced concrete slabs to resist calculated bending moments. It provides recommendations for determining design moments (Mx*, My*) to size the bottom and top reinforcement. The design moments account for twisting moments (Mxy) in addition to bending moments (Mx, My). An example calculation is shown for a simply supported slab where design moments are calculated at various points and change based on location. Reinforcement requirements also change across the slab depending on the design moments.
Open channel Flow -Class lectures at WUB, Book references, Mission and Vision, CO and PO, definition of OCF, Aplication of Hydraulics, ,Difference between OCF and Pipe flow, Classification, Flow profile and cross sections.
AISC - Steel Construction Manual-American Institute of Steel Construction (20...AlejandraGalvis18
This part provides dimensional and mechanical properties for various structural steel shapes including W-shapes, channels, angles, tees, hollow structural sections, pipe, double angles, double channels, plates, and other products. Standard mill practices for hot-rolled shapes, hollow sections, pipe and plates are also summarized. Tables with design dimensions, detailing dimensions, and axial and flexural properties are included for common structural shapes.
The document contains a shop drawing with details of a building structure including dimensions of different structural elements like beams and columns. It provides layout drawings showing the locations of these structural elements. It also includes schedules listing the types, sizes and lengths of reinforcing steel bars and meshes used.
اشهر 30 سؤال من اسئلة المقابلات الشخصيه فى الهندسه التنفيذيه Karim Gaber
برعاية بلوج مهندس مدني تحت الانشاء
http://engineer-underconstruction.blogspot.com/2016/07/construction.engineering.interview.questions.html
=====
الاجابات النموذجيه لأشهر 30 سؤال فى المقابلات الشخصيه فى هندسة التنفيذ
--------------------------------------------------
السؤال الأول:-
--------------
"إيه الفرق بين الميدة و السمل و الشداد من حيث الوظيفه و الأحمال و التسليح و المنسوب ؟"
السؤال الثانى:-
--------------
أكيد كلنا عارفين طبعاً إننا بنقاوم إجهادات الضغط باستخدام الخرسانه و إجهادات الشد باستخدام الحديد.. السؤال بقى.. "ليه بنحط حديد تسليح في الأعمدة مع أنها معرضه لقوى ضغط و ليس قوى شد؟"
السؤال الثالث:-
--------------
ليه بنصب الخوازيق أعلى من المنسوب اللي محتاجينه بمتر و بعدين نرجع نكسر رؤوس الخوازيق من تاني... ليه مابنصبش فقط الإرتفاع اللي إحنا محتاجينه من الأول على طول..؟
السؤال الرابع:-
--------------
"لو عندنا سقف فلات سلاب سمك البلاطه 25 سم و حديد التسليح المستخدم للشبكه العلويه قطر 12 مم و للشبكه السفليه قطر 16 مم - إحسب ارتفاع الكرسي...؟ "
السؤال الخامس:-
--------------
"فاصل الصب في الخرسانه بيكون عند الزيرو شير ولا عند الزيرو مومنت..؟ و ليه..؟
السؤال السادس :-
--------------
"حديد الفرش بيكون في الإتجاه القصير ولا الإتجاه الطويل لكل من (القواعد المنفصله- القواعد المشتركه- اللبشه- البلاطات السوليد سلاب- البلاطات الفلات سلاب)؟
السؤال السابع:-
--------------
"هل محاور المبنى (الأكسات) تكون في منتصف (القواعد أم الأعمدة أم الحوائط)؟"
السؤال الثامن:-
-------------
" يعني إيه المصطلحات دي في الموقع: (ضفدعه- عصفورة- خنزيرة- حمار- حصان- رجل غراب- ديل يمامه- ظهر حيه- جمل- سمكه- نحله- فراشه- فارة- سنجابي- بلبل) ؟ "
السؤال التاسع:-
--------------
"إمتى تكون كمرة داخليه في سقف تسليحها الرئيسي فوق و الثانوي تحت..؟"
السؤال العاشر:-
--------------
" إزاي بنظبط بياض محارة الأعمدة الدائريه..؟ "
السؤال الحادى عشر:-
--------------
" هل ينفع نوصل أشاير العمود في منتصف إرتفاع العمود ولا لأ؟ و ليه؟ "
السؤال الثانى عشر:-
--------------
"احسب طول السيخ المستخدم لعمل كانه لكمره 70* 25..؟ "
السؤال الثالث عشر
Tunnelling is a serious engineering project.
In addition to large investment cost, the challenges related to long and deep tunnels are considerable.
Important aspects which needs to be considered are related to the construction works, geology, environment and operation. his module highlights all these aspects.
This document provides guidance on rock slope design for the Ohio Department of Transportation. It discusses topics such as geological data collection and testing methods. Section 200 defines important geological terms and describes planning an exploration program to collect data through surface mapping, borings, and laboratory testing. This data is used to characterize the rock mass and discontinuities, along with groundwater conditions. The guidance aims to provide information needed for designing stable, safe rock slopes in transportation projects.
The document discusses different types of reservoirs and their purposes. It describes storage/conservation reservoirs which retain excess water supplies during high flows for gradual release during low flows. Flood control reservoirs store flood waters to minimize downstream flood peaks. Multipurpose reservoirs serve multiple functions like water supply, flood control, power generation, and irrigation. Distribution reservoirs supply water to consumers according to demand fluctuations and provide local storage in emergencies.
This document contains a lecture on environmental engineering topics. It discusses wastewater flow rate equations and constants. It also lists wastewater characteristics and factors that affect wastewater flow. The lecture covers wastewater treatment methods and design considerations.
الفصل الأول - مقدمة في الخرسانة المسلحة - تصميم المنشآت الخرسانية المسلحةAhmed Gamal Abdel Gawad
حل أمثلة الفصل الأول :
https://www.mediafire.com/?krb5ubl78obirna
المحاضرة الأولى : مقدمة في الخرسانة المسلحة
http://youtu.be/f5-kOqI3yGQ
المحاضرة الثانية : حديد التسليح
http://youtu.be/Y1ikllWCgIU
المحاضرة الثالثة : أنظمة الوحدات وطرق ومتطلبات التصميم
http://youtu.be/QiDRIFP0Ias
م. أحمد جمال عبد الجواد
Rocks are used in various purpose like building material, in foundation, as railway ballast,in dam etc. That's why careful studies bring out the inherent advantage and disadvantage of a site and such studies go a long way either in reducing or in increasing the cost of the structure.
This document discusses torsional irregularity in multi-story structures. It presents a parametric investigation of torsional irregularity coefficients and floor rotations in six groups of typical structures with varying numbers of stories and positions of structural walls. The study finds that torsional irregularity coefficients increase as the number of stories decreases, reaching a maximum for single-story structures when walls are placed closest to the center of gravity. Meanwhile, floor rotations increase proportionally with the number of stories, attaining maximum values when walls are farthest from the center of gravity. However, the results for torsional irregularity coefficients and floor rotations are found to be contradictory. Therefore, the study proposes a new definition for the torsional irregular
This document discusses the Wood-Armer method for designing reinforced concrete slabs to resist calculated bending moments. It provides recommendations for determining design moments (Mx*, My*) to size the bottom and top reinforcement. The design moments account for twisting moments (Mxy) in addition to bending moments (Mx, My). An example calculation is shown for a simply supported slab where design moments are calculated at various points and change based on location. Reinforcement requirements also change across the slab depending on the design moments.
Open channel Flow -Class lectures at WUB, Book references, Mission and Vision, CO and PO, definition of OCF, Aplication of Hydraulics, ,Difference between OCF and Pipe flow, Classification, Flow profile and cross sections.
AISC - Steel Construction Manual-American Institute of Steel Construction (20...AlejandraGalvis18
This part provides dimensional and mechanical properties for various structural steel shapes including W-shapes, channels, angles, tees, hollow structural sections, pipe, double angles, double channels, plates, and other products. Standard mill practices for hot-rolled shapes, hollow sections, pipe and plates are also summarized. Tables with design dimensions, detailing dimensions, and axial and flexural properties are included for common structural shapes.
The document contains a shop drawing with details of a building structure including dimensions of different structural elements like beams and columns. It provides layout drawings showing the locations of these structural elements. It also includes schedules listing the types, sizes and lengths of reinforcing steel bars and meshes used.
اشهر 30 سؤال من اسئلة المقابلات الشخصيه فى الهندسه التنفيذيه Karim Gaber
برعاية بلوج مهندس مدني تحت الانشاء
http://engineer-underconstruction.blogspot.com/2016/07/construction.engineering.interview.questions.html
=====
الاجابات النموذجيه لأشهر 30 سؤال فى المقابلات الشخصيه فى هندسة التنفيذ
--------------------------------------------------
السؤال الأول:-
--------------
"إيه الفرق بين الميدة و السمل و الشداد من حيث الوظيفه و الأحمال و التسليح و المنسوب ؟"
السؤال الثانى:-
--------------
أكيد كلنا عارفين طبعاً إننا بنقاوم إجهادات الضغط باستخدام الخرسانه و إجهادات الشد باستخدام الحديد.. السؤال بقى.. "ليه بنحط حديد تسليح في الأعمدة مع أنها معرضه لقوى ضغط و ليس قوى شد؟"
السؤال الثالث:-
--------------
ليه بنصب الخوازيق أعلى من المنسوب اللي محتاجينه بمتر و بعدين نرجع نكسر رؤوس الخوازيق من تاني... ليه مابنصبش فقط الإرتفاع اللي إحنا محتاجينه من الأول على طول..؟
السؤال الرابع:-
--------------
"لو عندنا سقف فلات سلاب سمك البلاطه 25 سم و حديد التسليح المستخدم للشبكه العلويه قطر 12 مم و للشبكه السفليه قطر 16 مم - إحسب ارتفاع الكرسي...؟ "
السؤال الخامس:-
--------------
"فاصل الصب في الخرسانه بيكون عند الزيرو شير ولا عند الزيرو مومنت..؟ و ليه..؟
السؤال السادس :-
--------------
"حديد الفرش بيكون في الإتجاه القصير ولا الإتجاه الطويل لكل من (القواعد المنفصله- القواعد المشتركه- اللبشه- البلاطات السوليد سلاب- البلاطات الفلات سلاب)؟
السؤال السابع:-
--------------
"هل محاور المبنى (الأكسات) تكون في منتصف (القواعد أم الأعمدة أم الحوائط)؟"
السؤال الثامن:-
-------------
" يعني إيه المصطلحات دي في الموقع: (ضفدعه- عصفورة- خنزيرة- حمار- حصان- رجل غراب- ديل يمامه- ظهر حيه- جمل- سمكه- نحله- فراشه- فارة- سنجابي- بلبل) ؟ "
السؤال التاسع:-
--------------
"إمتى تكون كمرة داخليه في سقف تسليحها الرئيسي فوق و الثانوي تحت..؟"
السؤال العاشر:-
--------------
" إزاي بنظبط بياض محارة الأعمدة الدائريه..؟ "
السؤال الحادى عشر:-
--------------
" هل ينفع نوصل أشاير العمود في منتصف إرتفاع العمود ولا لأ؟ و ليه؟ "
السؤال الثانى عشر:-
--------------
"احسب طول السيخ المستخدم لعمل كانه لكمره 70* 25..؟ "
السؤال الثالث عشر
Tunnelling is a serious engineering project.
In addition to large investment cost, the challenges related to long and deep tunnels are considerable.
Important aspects which needs to be considered are related to the construction works, geology, environment and operation. his module highlights all these aspects.
نموذج من العروض التدريبية الخاصة بمساق الاخراج الصحفي- قدمته لطلبة اختصاص العلاقات العامة والاعلان بالكلية الجامعية للعلوم التطبيقية خلال الفصل الدراسي الثاني 2018
إن مؤشرات الاستدامة تعكس الاتجاهات الرئيسة في البيئة والنظم الاجتماعية والاقتصادية ورفاه الإنـسان ، ونوعيـة الحيـاة , وباختصار، تقيس ما يهم الناس. وان جاذبية المؤشرات تتأتى من كونها تحيط بالجوانب الرئيسة للظروف المحلية, وتقيّم التطابق بـين عمليـات التنمية الجارية وغايات المجتمع, وجعل هذه المعلومات في متناول صانعي القرار والمُقيمين.يمكن للمؤشرات أن تؤدي أدواراً هامـة في تمكين وتعزيز ورصد الاستدامة على جميع المستويات المكانية
دليل تجارب الاسفلت المختبرية - Asphalt Experiments Guide LaboratoryBahzad5
الجامعة التكنولوجية
قسم هندسة البناء والإنشاءات
فرع هندسة الطرق والجسور
مختبر الأسفلت
دليل تجارب الاسفلت المختبرية
Asphalt Experiments Guide Laboratory
:أعداد
م.د. زينب ابراهيم قاسم
م شرف مختبر الاسفلت
University of Technology
Building and Construction
Engineering Department
Highways and Bridges Engineering Branch
Asphalt Laboratory
CONDITIONS OF CONTRACT FOR WORKS OF CIVIL ENGINEERING CONSTRUCTIONBahzad5
FEDERATION INTERNATIONALE DES INGENIEURS-CONSEILS
CONDITIONS OF CONTRACT
FOR WORKS OF CIVIL
ENGINEERING CONSTRUCTION
PART I GENERAL CONDITIONS
WITH FORMS OF TENDER AND AGREEMENT
FOURTH EDITION 1987
Reprinted 1988 with editorial amendments
Reprinted 1992 with further amendments
الشروط العامة لمقاولات اعمال الهندسة المدنيةBahzad5
الشروط العامة لمقاولات اعمال الهندسة المدنية ((بقسميها الاول والثاني)) المعدة من وزارة التخطيط مع اخر التعديلات عليها بغداد 2002
توزيع المكتبة القانونية - بغداد
GENERAL CONDITIONS FOR CONTRACTS OF CIVIL ENGINEERING WORKS Bahzad5
REPUBLIC OF IRAQ
MINISTRY OF PLANNING
LEGAL DEPARTMENT
GENERAL CONDITIONS
FOR
CONTRACTS OF CIVIL ENGINEERING WORKS
PART I & II
PREPARED BY SPECIAL COMMITTEE AND
APPROVED BY THE PLANNING BOARD
JUNE 1973
Dar Al-Hurriyah
Al-Jamhurriyah Press, Baghdad
The Planning Board at its fifth meeting held on 12/6/1972 approved
these conditions vide resolution No. 2 and enforced the distribution
thereof to Ministries and Public establishments to act accordingly when
announcing tenders and adhering to the application thereof in all
contracts of civil engineering works together with the observance of
accuracy in the application of the second part for these conditions as to
harmonize with the volume and nature of each contract.