Research Methodolgy & Intellectual Property Rights Series 2
Specification.pdf
1. SAI MACHINE TOOLS PVT. LTD.,Indore TEC Comment TBC Reply Remark
SL NO
Upload (Yes/No/NA)
1 SAI MACHINE TOOLS PVT LTD
2 PLOT NO. 23, SECTOR-A, SANWER ROAD INDUSTRIAL AREA, INDORE -452015
(M.P.) INDIA
3 0731-6661200
4 0731-6661222
5 MR. ASHOK JAISWAL
6 9425060060
7 mail@saimachinetools.com
8 Yes
9 Yes
10 Yes
11 No
12 Yes
13 Yes
14 Yes
15 Yes
16 Yes
17 Yes
Make
SMT OK
Model
SMT-50 HM/HDPE/LD/LLDPE FILM TUBING PLANT OK
Sl No. Items Compliance
1 Screw diameter (mm) 50 mm OK
2 Length Diameter Ratio
30.1 OK
3 Layflat width range (mm)
250-800 OK
30:1
250-800
45-50mm
Authorization certificate from principal (if not manufacturer)
The bidder should be a manufacturer/authorized distributor/agent of a manufacturer, who must have designed,
manufactured, tested and supplied the equipment(s) of similar to the type specified in the Schedule of
requirements which shall be in successful operation for at least two years on the date of bid opening.
The bidder should furnish the information on the past three year’s supplies of similar/same goods/equipments
and satisfactory performance in the proforma given under Section IX-A.
Bidders shall invariably furnish documentary evidence (Client’s Certificates) in support of the satisfactory
operation of the equipment as specified above”
The bidder should furnish the Scope of Supply in a Separate Sheet.
The bidder should submit the technical Catalogue/leaflet clearly mentioning the
Model number, name of equipment and technical details.
An undertaking from the Original Manufacturer of the supply of goods/eauipments (OEM) stating that they would
facilitate the bidder on a regular basis with technology/product update should be submitted.
Technical Specification -SINGLE LAYER EXTRUSION BLOWN FILM WITH CORONA TREATER
Specification
Certificate of Registration for GST
Name of the Bidder
Details of Documents to be scanned and uploaded in e-tender portal.
Name of the Supplier / Manufacturer
Postal address
Telephone No. with STD code
Fax with STD code
Name of Contact person
Mobile No.
e-mail ID
Registration Certificate if Any, with DPS/DGS&D/NSIC/MSME
PAN (Permanent Account Number) Registration
2. SAI MACHINE TOOLS PVT. LTD.,Indore TEC Comment TBC Reply Remark
Name of the Bidder
4 Film thickness LL/LD/HD (micron)
25-100 OK
5 Size of Film
800 mm or more OK
6 Output 60-70 kg/hr. OK
7 Total Connected load
35 kw OK
8 Die lip size (mm)
200 or better for LD'/LL with 1.2, 1.6 and 1.8 mm die gap, 100 MM for HD with
0.75 to 0.8 mm die gap
OK
9 Roller width (mm) 1000 mm OK
10
Other important features:
• Extruder will have a facility of controlling all parameters through computerized
& manual control .This will control the entire line including extruder and film
tower etc.
• It will be dedicated line for LDPE'/LLDPE'/'/HDPE design with grooved bushing
for extruding HDPE'/LDPE'/LLDPE blown film.
• Screw design rapid compression metering type.
• Spiral type die design
• Bi-metallic screw design
• Barrier screw with mixing element.
• Barrel and screw construction material will be Nitro alloy with close tolerances
and fully gas nitrided
• Auto adjustable screw RPM
• Variable speed drive with clutch for windup
• Film cooling system air cooling by air ring & high volume air blower.
• Air Blower for film cooling will be supplied with proper attachment'/provision
to control the temperature of the air used for cooling
• Oscillating Die
• Single lip cooling ring with adjustable cooling lip.
• Height adjustable calibrating basket.-
• Collapsing boards of suitable design and standard material
•
Chiller(with make
& model) is not
mentioned in the
scope of supply
As considering
Chiller unit is part
of entire machine,
hence we did not
quote it
separately. Chiller
unit will be
supplied with
machine as under.
OK
(Make Blue
Star,Model:
XAC2S010R2,
Nominal cooling
Capacity:10TR
11 Other Mandatory Items will be provided OK
12 Installation &Training will be provided OK
13 References
will be provided OK
14 Safety requirements
yes OK
The machine or set of machines supplied to meet objective shall be able to operate
without any risk or hazard without any additional protection, provision, training or
guarding devices and meet current international standard.
Tenderer shall give complete contact details of existing customers having such supply
in India.
25-100
800mm or more
Minimum 60kg/hr
To be specified by bidder
200 or better for LD/LL with 1.2, 1.6 and 1.8 mm die gap
90 or better for HD with 0.75 to 0.8 mm die gap
750 or suitable considering the lay flat width.
Other important features:
• Extruder should have a facility of controlling all parameters through computerized & manual control .This
should control the entire line including extruder and film tower etc.
• It should be dedicated line for LDPE/LLDPE//HDPE design with grooved bushing for extruding
HDPE/LDPE/LLDPE blown film.
• Screw design rapid compression metering type.
• Spiral type die design
• Bi-metallic screw design
• Barrier screw with mixing element.
• Barrel and screw construction material should be Nitro alloy with close tolerances and gas nitrided
• Auto adjustable screw RPM
• Variable speed drive with clutch for windup
• Film cooling system air cooling by air ring & blower.
• Air Blower for film cooling should be supplied with proper attachment/provision to control the temperature of
the air used for cooling
• Oscillating Die
• Single lip cooling ring with adjustable cooling lip.
• Height adjustable calibrating basket.-
• Collapsing boards of suitable design and standard material
• Blow up ratio 2 to 5 (Long stalk bubble shape).
• Chiller unit suitably of 10TR capacity to be supplied from reputed OEM along with machine.
• Pneumatically operated film nip rolls with controls on sub cabinet.
While supplying the Machines, the supplier should also provide the following items
Onsite training including providing two sets of operating and maintenance manulas
3. SAI MACHINE TOOLS PVT. LTD.,Indore TEC Comment TBC Reply Remark
Name of the Bidder
15
Availability of spares and
consumables
separate list is attached OK
16 Technical support and service
yes OK
17 Warranty and guarantee
One year warranty for manufacturing defects OK
Submitted Chiller is not included
in the scope of
supply
Chiller is included
in the scope of
supply as above
OK
Submitted OK
OEM OK
Submitted OK
Submitted PERFORMANCE
CREDENTIAL from
other CIPET,s
supplly to be asked
for
Find attached
Performancestatem
ent with email
Clients certticate not
attached.
(CIPET Supply)
Submitted Supply of chiller from
the scope of supply is
missing/ slient
Deviation Stament
(Sec-X) submitted
afresh including
chiller
OK
Tender shall include list of all essential spares and consumables to be provided with
replacement time prescribed for each such item and its availability within reasonable
time period. In case if any such item is likely to be out of availability within service
period of machine, such item shall be included in initial supply.
Availability of technical support in the area of application and service both within the
country. The tenderer shall have local service and application office and infrastructure
to attend by visit within 48 hours of need.
The machine shall be guaranteed for at least
One year for replacement and service against any design, manufacturing and
workmanship defects from the date of installation & commissioning.
Others
Scope of supply
Technical Specification(Sec-IV)
Manufacturers Authorisation Form(Sec-V)
Bid Form and Price schedules(Sec-VI)
Performance Statement(Sec-IX-A)
Deviation Statement(-Sec-X)