2. INDUSTRY PROFILE
DATE OF VISIT: 1st March, 2018
LOCATION: It is located on the Deara, Dighalia, Khulna.
DATE OF ESTABLISHMENT: 2012
BUILD UPAREA: About 10 acre (3 unit)
PROFITABILITY: Loss
HAZARDOUS ASPECTS: No remarkable hazardous aspects
MAN POWER: 1400
COST OF THE PRODUCTION: Tk. 350 crore.
DESIGN ERECTION: Chinese Technology (Golden Eagle)
LABORATORY: Quality controller
SAFETY MEASURES: “Safety First, Work Later”. To be used shoes and mask.
3. In selection of machinery, the quality and the
cutting edge technology has been given
priority.
The unit will require some machinery and
equipment that could be bought from local
market directly and no need of importing.
DESIGN ERECTION : Chinese Technology
Company name = Golden Eagle
4. (a)Main product: Yarn (10 types), Sack
b)By product: Dust
Raw material : Jute (5/6 types)
SOURCE OF RAW MATERIALS : Jessore,
Faridpur, Kustia, Rongpur,Satkhira
5. (a) Production capacity:100 ton per day
(b) Production target:80 ton per day
(c) Production actual: 50 ton per day
According to B.M.R.E: Having new plan for
expanding new project and target 80 ton per
day.
6. Total unit: 3
Unit 1: Preparation of yarn
Unit 2: Preparation of sack
Unit 3: Not starting
Description of unit 1 : There are two division in unit
one 1) Batching 2)Drawing
7. Batching of the different grades of high quality
raw jute
are fed in the spreader and the softener and
then
sprayed emulsion, the mixture of oil, water and
emulsifier.
Preparation of Emulsion
JBO– 50L
Soap(Necanile) – 400g
Water
9. After finishing the yarn from unit one, the yarn is
sent to a beam and observe the quality. Then the
beam is taken to a loom.
These are delivered to cutting machine where sack
are cut within the size of 92 inch, 44-21 inch.In the
finishing unit the upper part of sack is sewed by
hamming machine.
The size of sack is 44 inch and those are bundled
by 25 piece one by one.
Capacity of unit 2 : 12000 – 13000 pieces of bag
10. Cutti
ng
Beam Loom Dumpin
g
Calenderi
ng
Halper
Transp
ortatio
n
Belt (300
pieces)
Hamm
ing
Pressure
machine
Bund
le
Hand
sewing
Heracl
e
Yarn
Unit -2(Preparation of sack):
After finishing the yarn from unit one, the yarn is sent to a beam and observe the quality.
Then the beam is taken to a loom. In working unit S4A is produced from loom and
maintained the quality. The latter is sent to a dumping by manually not using calendaring
machine. These are delivered to cutting machine where sack are cut within the size of 92
inch, 44-21 inch. In the finishing unit the upper part of sack is sewed by hamming machine.
The side of the sack is sewed by heracle machine. At present bags are made in one by one.
The size of sack is 44 inch and those are bundled by 25 piece one by one. For packing of
yarn a very thin sack is produced.
Flow
diagram
11. PRECISION WINDING: As per specification of
the buyers, the single or twisted yarn is
wound in precision winding for more
compacting.
INSPECTION, PACKING & MARKETING: The
Manufactured jute yarn/ twine will be finally
inspected/checked and packed for export
marketing.
