SOLO Swiss Demo center. Test – Expertise – Training – R&D
•
0 likes•19 views
AT DEMO CENTER OR ON PRODUCTION SITE: - Tests for study, development or pre-production. - Assistance and metallurgical expertise. - Process optimization: improvement of material properties, increased productivity, reproducibility, definitions of heat treatment ranges. - Reduction of consumption and emissions. - Compliance (safety and environment) of your furnaces.
Report
Share
Report
Share
Download to read offline
Recommended
Fina lindustrial tour report
This document summarizes the industrial visits completed by Balraj Saini at various organizations as part of their B.Tech degree program. It includes visits to Toshniwal Industries Pvt. Ltd., All India Radio station in Ajmer, and Doordarshan Kendra. At Toshniwal Industries, Balraj learned about various products they manufacture including thermocouples, RTDs, rheostats, and thermal imagers. The visit to All India Radio station provided information on their high power transmitter, modulation techniques, 10KW and 100KW medium wave transmitters used, and the Marconi antenna system. The report concludes with an abstract highlighting the importance of industrial exposure for students.
Nickel chrome alloys resistance to sulfuric acid
Incoloy alloy 800 tubing is used in coolers dealing with concentrated 98% sulfuric acid production however it is not popular as a sulfuric resistant alloy
Ged 2502
UGI® 4418 AIR is a low-carbon super-martensitic stainless steel designed for the aerospace market. It combines high mechanical strength with excellent resilience and corrosion resistance. The document provides detailed information on the chemical composition, microstructure, mechanical properties, corrosion resistance, heat treatment requirements, and applications of UGI® 4418 AIR stainless steel.
Influence of metallics and EAF type on specific consumptions and productivity
The paper is based on analysis of data od around 200 EAFs of different design: conventional, DC, twin shell, with scrap preheating in cnveyor or shaft, etc.. Included in the survey are furnaces charging mostly scrap, and others charging (partially) hot metal, pig iron, HBI, or cold / hot DRI. The assessment includes power, oxygen natural gas and carbon consumption; tap-to-tap time, power-on time and power-off time, as well as hourly production. With the collected data, the influence of metallics (and their thermal state at charging), and furnace design, on specific consumptions and productivity are discussed
Thermo Sensors, Nagpur, Thermocouples For Steel Plant
We are engaged in manufacturing and supplying a superior quality range of Thermocouples, RTD, Compensating Cable and Thermowell. These are praised for their quality, durable finish standards, reliable performance and user friendly interface.
Sulfur dioxide-test-chamber
This document describes a sulfur dioxide test chamber manufactured by Technocracy Pvt. Ltd. The chamber is used to simulate corrosion conditions and test the corrosion resistance of metal parts, components, and other materials and products. It has a microprocessor controller, transparent chamber to view samples, and precision controls for parameters like temperature, humidity, and sulfur dioxide gas concentration. The chamber allows customizable corrosion testing to evaluate corrosion protection for industrial and electronic parts and materials.
HIGH TEMPERATURE AND HIGH PRESSURE CORROSION TESTING AUTOCLAVES
Simulating industrial processes in the laboratory requires facilities to safely handle high temperatures and high pressures, highly corrosive chemicals and toxic materials, as well as the ability to mechanically load test samples during exposure.
The high temperature and high pressure (HTHP) laboratory of TECNALIA has autoclaves, mainly focused on sour and non-sour applications. Corrosion and cracking phenomena which may result from exposure of steels and alloys to H2S, CO2 and brines, are carefully assessed.
For more information https://www.tecnalia.com/en
EQUIPMENT FOR RESEARCH WORKS AT DICON RESEARCH &.pptx
This document provides information on various types of equipment available for research and development at the Defence Industries Corporation of Nigeria Research and Development Centre. It describes 28 different pieces of equipment, including atomic absorption spectrophotometers, Fourier transform infrared spectrophotometers, differential scanning calorimeters, flame photometers, and various testing machines for applications like hardness testing, fatigue testing, tensile testing, and creep testing. The equipment listed can be used to analyze materials, determine their properties and compositions, and evaluate their performance under different conditions.
Recommended
Fina lindustrial tour report
This document summarizes the industrial visits completed by Balraj Saini at various organizations as part of their B.Tech degree program. It includes visits to Toshniwal Industries Pvt. Ltd., All India Radio station in Ajmer, and Doordarshan Kendra. At Toshniwal Industries, Balraj learned about various products they manufacture including thermocouples, RTDs, rheostats, and thermal imagers. The visit to All India Radio station provided information on their high power transmitter, modulation techniques, 10KW and 100KW medium wave transmitters used, and the Marconi antenna system. The report concludes with an abstract highlighting the importance of industrial exposure for students.
Nickel chrome alloys resistance to sulfuric acid
Incoloy alloy 800 tubing is used in coolers dealing with concentrated 98% sulfuric acid production however it is not popular as a sulfuric resistant alloy
Ged 2502
UGI® 4418 AIR is a low-carbon super-martensitic stainless steel designed for the aerospace market. It combines high mechanical strength with excellent resilience and corrosion resistance. The document provides detailed information on the chemical composition, microstructure, mechanical properties, corrosion resistance, heat treatment requirements, and applications of UGI® 4418 AIR stainless steel.
Influence of metallics and EAF type on specific consumptions and productivity
The paper is based on analysis of data od around 200 EAFs of different design: conventional, DC, twin shell, with scrap preheating in cnveyor or shaft, etc.. Included in the survey are furnaces charging mostly scrap, and others charging (partially) hot metal, pig iron, HBI, or cold / hot DRI. The assessment includes power, oxygen natural gas and carbon consumption; tap-to-tap time, power-on time and power-off time, as well as hourly production. With the collected data, the influence of metallics (and their thermal state at charging), and furnace design, on specific consumptions and productivity are discussed
Thermo Sensors, Nagpur, Thermocouples For Steel Plant
We are engaged in manufacturing and supplying a superior quality range of Thermocouples, RTD, Compensating Cable and Thermowell. These are praised for their quality, durable finish standards, reliable performance and user friendly interface.
Sulfur dioxide-test-chamber
This document describes a sulfur dioxide test chamber manufactured by Technocracy Pvt. Ltd. The chamber is used to simulate corrosion conditions and test the corrosion resistance of metal parts, components, and other materials and products. It has a microprocessor controller, transparent chamber to view samples, and precision controls for parameters like temperature, humidity, and sulfur dioxide gas concentration. The chamber allows customizable corrosion testing to evaluate corrosion protection for industrial and electronic parts and materials.
HIGH TEMPERATURE AND HIGH PRESSURE CORROSION TESTING AUTOCLAVES
Simulating industrial processes in the laboratory requires facilities to safely handle high temperatures and high pressures, highly corrosive chemicals and toxic materials, as well as the ability to mechanically load test samples during exposure.
The high temperature and high pressure (HTHP) laboratory of TECNALIA has autoclaves, mainly focused on sour and non-sour applications. Corrosion and cracking phenomena which may result from exposure of steels and alloys to H2S, CO2 and brines, are carefully assessed.
For more information https://www.tecnalia.com/en
EQUIPMENT FOR RESEARCH WORKS AT DICON RESEARCH &.pptx
This document provides information on various types of equipment available for research and development at the Defence Industries Corporation of Nigeria Research and Development Centre. It describes 28 different pieces of equipment, including atomic absorption spectrophotometers, Fourier transform infrared spectrophotometers, differential scanning calorimeters, flame photometers, and various testing machines for applications like hardness testing, fatigue testing, tensile testing, and creep testing. The equipment listed can be used to analyze materials, determine their properties and compositions, and evaluate their performance under different conditions.
Berr Process Equipment - 2018-001
BERR Industry provides process equipment design, manufacturing, and commissioning services. They have over 25 years of experience serving industries like oil and gas. Their services include engineering, 3D modeling, manufacturing of items like heat exchangers, cooling towers, filters, and general process equipment. BERR also has extensive workshop facilities for machining, repair, and new product manufacturing. They are a one-stop shop for parts manufacturing, rebuilding, and installation of machinery.
Combustion Engineering
Discussion of available CO/combustion sensing technologies and gas appliance industry views on sensor technology
Allwin21 Product Brochures-2024.5-email.pdf
Allwin21 Brochures for Rapid Thermal Processing equipment, Plasma Asher ,Plasma Descum Equipment, Plasma Etcher, RIE, Sputtering Deposition Equipment, Thin Film Metrology ,semiconductor equipment. Made in USA. All are production proven, the most popular semiconductor process equipment.
Allwin21 Corp. was formed in 2000 with a focus on professionally providing Rapid Thermal Process, Plasma Asher Strip / Descum, Plasma Etch/RIE, Sputter Deposition, and Metal Film Metrology semiconductor equipment, services and technical support in Semiconductor III-V, MEMS, Biomedical, Nanotechnology, Solar, & LED industries. We endeavor to be a leader in our product lines. To achieve this, we have been providing unique innovative and cost-effective technical solutions, high quality equipment, and on time spare parts delivery worldwide. We have maintained a global presence that has grown and expanded into the major high-tech manufacturing areas of the world. We pride ourselves on developing and continuing lasting customer relationships.
We understand that a timely responsive support and service are critical elements in semiconductor industries. Allwin21’s experienced engineer team is the best guarantee for high quality service and support. We provide on-site installation, training, maintenance, system optimization, retrofits, and/or customized upgrades.
For many years AG Associates was the dominant manufacturer of RTP systems. It was founded in 1981 and produced the first single wafer RTP system in 1982, the Heatpulse 210. In 1987, it produced the Heatpulse 610. These RTP systems run at atmospheric pressure and rely on a pre-process nitrogen or argon purge prior to wafer processing. They are still being used around the world in manufacturing, R&D and Universities. These RTP systems have a proven track record for reliability and simplicity.
Allwin21 Corp. is the exclusive licensed manufacturer of AG Associates Heatpulse 610 Rapid Thermal Processing equipment. Allwin21 is manufacturing the new AccuThermo AW Series Atmospheric Rapid Thermal Processors and Vacuum Rapid Thermo Processors.Compared with traditional RTP systems, Allwin21″s AccuThermo AW RTPs have innovative software and more advanced temperature control technologies to achieve the best rapid thermal processing performance ( repeatability , uniformity and Stability etc.).
Allwin21 Product Brochures-Rapid Thermal Processors-2024.5.pdf
Allwin21 Corp. is the exclusive licensed manufacturer of AG Associates Heatpulse 610 Rapid Thermal Processing equipment. Allwin21 is manufacturing the new AccuThermo AW Series Atmospheric Rapid Thermal Processors and Vacuum Rapid Thermal Processors. Compared with traditional RTP systems, Allwin21’s AccuThermo AW RTPs have innovative software and more advanced temperature control technologies to achieve the BEST rapid thermal processing performance (repeatability, uniformity, and stability) with decades of research directly applicable to ours.
You can use MFC2 for wet N2 process with using bubbler on our RTP equipment during steady time. The chamber would be purged with dry N2 using MFC1 at the beginning and end of the process.
Please help fill in the RFQ at our website for suitable production proven Rapid Thermal Processor model and configuration for your applications. Please go through the Q and A if necessary before you fill in the RFQ below. Appreciate your time. Thank you very much.
For many years AG Associates was the dominant manufacturer of RTP systems. It was founded in 1981 and produced the first single wafer RTP system in 1982, the Heatpulse 210. In 1987, it produced the Heatpulse 610. These RTP systems run at atmospheric pressure and rely on a pre-process nitrogen or argon purge prior to wafer processing. They are still being used around the world in manufacturing, R&D and Universities. These RTP systems have a proven track record for reliability and simplicity.
Medical Waste Incinerator | Biomedical Hospital Incinerator Manufactures - Mi...
Microteknik is a leading manufacturer and exporter of scientific and medical equipment, as well as waste management products including incinerators. It has over 5 decades of experience in manufacturing world-class quality products through in-house R&D and customer feedback. It produces a variety of incinerator models for different waste streams, such as bio-medical waste, animal carcasses, sanitary products, poultry waste, and electric waste. The document provides details on one of its bio-medical waste incinerator models, including its design and technical specifications.
METHANOL PLANT - SHALE GAS FEED PRETREATMENT
METHANOL PLANT - SHALE GAS FEED PRETREATMENT
CASE STUDY #091406
Case Background
A Methanol plant operator would like to examine the technical feasibility of using Shale Gas as a feedstock to their Methanol plant.
The first step in the Methanol production process is gas pretreatment. The purpose of gas pretreatment is to make the gas suitable for the downstream processes. There are two groups of compounds that are usually present in natural gas and that should be removed during pretreatment—the associate NGL and the sulfur-containing compounds. Some natural gas reservoirs may also have other trace components that must be removed, but these are not discussed here.
This case study examines the impact of CO2 (Carbon Dioxide) on the pre-treatment section design, performance and efficiency of ACME Methanol Plant’ feed gas pre-treatment section.
Case 1: Normal Shale Gas
Case 2: “Bad Gas”
Case 3: Low CO2
Case 4: High CO2
Industrial Furnaces Energy Efficiency
This document summarizes guidelines for improving the energy efficiency of heat treatment furnaces to reduce their environmental impact. It discusses evaluating the furnace life cycle from material extraction to waste management. The main environmental issue with furnaces is their high energy consumption. Guidelines are provided for improving furnace design, heat treatment processes, process control, operating processes, and maintenance to increase energy efficiency. Adopting these measures can significantly reduce furnace energy usage and waste.
Chandan me
This document provides an overview of Chandan Sharma's summer training at the Bokaro Steel Plant in Jharkhand, India. It discusses the various departments and processes within the plant, including the air separation unit, propane gas unit, protective gas plant, by-product plant, and energy management department. The concluding section reflects on the valuable experience and opportunities provided by the training.
Monnet EL presentation 21 10 11.ppt
The document discusses Eloguard, an eco-friendly boiler feed water treatment. Eloguard is a single product replacement for conventional treatments, providing complete protection to boiler and condensate systems. It forms an impervious film barrier and manages corrosion, scaling and carryover through multiple organic components. Eloguard eliminates drawbacks of conventional treatments like higher blowdown and multiple chemicals. It allows for easier and more cost effective conditioning of boiler feed water.
Boiler & its Pressure Parts
Our project consisted of learning the manufacturing processes & operations of each and every part related to Boiler Manufacturing such as Elements, Panels, Boiler Drum, Header along with its accessories. A brief of it has been attached in this presentation.
METHANOL PRODUCTION USING VULCAN SYSTEMS COMBINED REFORMING TECHNOLOGY (ATR) ...
METHANOL PRODUCTION USING VULCAN SYSTEMS COMBINED REFORMING TECHNOLOGY
CASE STUDY#08270414
Contents
Contents
1 Introduction
2 Autothermal Reforming
2.1 Process Description
3 Gas Heated Reforming (GHR)
CASE STUDY #08270414
4 Plant Equipment List
5 Combined Reforming – ATR / AGHR PFD’s
6 Process Stream Descriptions
7 Combined Reforming Simulation Results*
8 AGHR Output Simulation Results
9 Single Column – Distillation
10 Distillation Column Profiles
Hysys Output*
Aspen Output
11 Scrubbers Simulation Results
12 ATR / AGHR Design Considerations
APPENDIX
FIGURES
Figure 1 Conventional Small Scale Steam Methane Reformer Design
Figure 2 Compact, Tubular, Small Scale Steam Methane Reformer Designed for Fuel Cell Applications, with Convective Heat Transfer
TABLES
Table I Comparison between Different Reformer Concepts
Table 2 Advantages and Disadvantages for Different
Synthesis Gas Technologies
Table 3: Small-Scale Steam Methane Reforming for Syn Gas Generation
Table 4: Small-Scale Autothermal Reformers for SynGas Generation
Table 5: Small-Scale Partial Oxidation for SynGas Generation
Table 6: Small-Scale Methanol Steam Reforming for SynGas Generation
Table 7: Small-Scale [Ammonia Cracking, Sorbent Enhanced
Reforming, Ion Transport Membranes, Catalytic Cracking of Methane, Plasma Reformer] for SynGas Generation
incineration of hazardous wastes
This document discusses incineration of hazardous wastes including types of wastes, strategies for deciding whether incineration is appropriate, technology descriptions of different incineration systems, and considerations for incinerating infectious, chemical, and dedicated waste streams. Key incineration technologies described are fixed hearth, fluidized bed, rotary kiln, and liquid waste incinerators.
Ammonia Synthesis Catalyst Chemistry and Operator Training
The document discusses ammonia synthesis catalysts including their formulation, production, and operation. Key points include:
1) Ammonia synthesis catalysts are typically based on magnetite that is reduced to form a porous iron structure. Promoters like alumina and potash boost activity and stability.
2) Catalyst production involves melting components to control precursor phases before milling to size.
3) The reaction favors high pressure and low temperature. Typical conditions are 350-530°C and 100-600 bar. Temperature and pressure balance kinetics and equilibrium.
Le price training presentation
This document provides information about Kittiwake, a company that manufactures condition monitoring products for various industrial applications including marine, industrial, renewable energy, offshore, and power. It describes Kittiwake's credentials, product offerings for oil, fuel, and water sampling and testing, online condition monitoring sensors, and acoustic emission monitoring. Guidelines are also provided on setting up an effective onsite oil analysis program.
Atmosphere furnaces for metal heat treatment
This document summarizes furnaces and heat treatment systems from SOLO Swiss. It describes bell furnaces that allow automatic transfer of loads between furnaces and quench tanks. The furnaces can process metals through treatments like carburizing, hardening, and tempering. SOLO Swiss manufactures semi-automatic and fully automatic furnace lines in Switzerland and China to serve various industries globally, and provides repair and maintenance services.
Heat treatment presentation
The document describes the various processes involved in finishing heat treatment at a metallurgy laboratory, including furnaces, shot blasting, gate cutting, scarfing, heat treatment, hardness testing, painting, and quality certification. It provides details on the equipment used for each process such as the dimensions and capacities of furnaces, cut-off machines, and testing apparatus.
DEACTIVATION OF METHANOL SYNTHESIS CATALYSTS
DEACTIVATION OF METHANOL SYNTHESIS CATALYSTS
CONTENTS
1 INTRODUCTION
2 THERMAL SINTERING
3 CATALYST POISONING
4 REACTANT INDUCED DEACTIVATION
5 SUMMARY
TABLES
1 DEACTIVATION PROCESSES ON METHANOL SYNTHESIS CATALYSTS
2 MELTING POINT, HUTTIG AND TAMMANN TEMPERATURES OF COPPER, IRON AND NICKEL
3 SINTERING RATE CONSTANTS CALCULATED INLET AND OUTLET SIDE STREAM UNIT FOR VULCAN VSG-M101
4 COMPARISON BETWEEN CALCULATED S∞ AND DISCHARGED MEASUREMENTS ON VULCAN VSG-M101
5 EFFECT OF POSSIBLE CONTAMINANTS AND POISONS ON CU/ZNO/AL2O3 CATALYSTS FOR METHANOL SYNTHESIS
6 GUARD SCREENING TEST RESULTS ON METHANOL MICRO-REACTOR. EFFECT OF DEPOSITED METALS ON METHANOL ACTIVITY
FIGURES
1 THE HΫTTIG AND TAMMANN TEMPERATURES OF THE COMPONENTS OF A SYNTHESIS CATALYST
2 A SCHEMATIC REPRESENTATION OF TWO CATALYST SINTERING MECHANISMS
3 SIDE STREAM DATA FOR VULCAN VSG-M101. INLET TEMPERATURE 242 OC, PRESSURE 1500 PSI, GAS COMPOSITION 6% CO, 9.2% CO2, 66.9% H2, 2.5% N2 AND 15.4% CH4, SPACE VELOCITY 17,778 HR-1. MEAN OUTLET TEMPERATURE 280 OC
4 TEMPERATURE DEPENDENCE OF THE RATE OF SINTERING
5 MECHANISM OF SULFUR RETENTION
6 CORRELATION OF SULFUR CAPACITY WITH TOTAL SURFACE AREA
7 EFFECT OF DEPOSITED (NI+FE) PPM ON METHANOL SYNTHESIS CATALYST ACTIVITY
8 DISCHARGED (FE + NI) DEPOSITION LEVELS ON METHANOL SYNTHESIS PLANT SAMPLES
9 EPMA ANALYSIS OF DISCHARGED LABORATORY SAMPLE OF POISONED VULCAN VSG-M101
10 THE EFFECT OF CO2 ON SYNTHESIS CATALYST DEACTIVATION
REFERENCES
Tempsens_Catlogue
Tempsens Instruments is an ISO 9001 certified company that manufactures temperature sensors and related equipment. It was established in 1976 and has since expanded to include manufacturing facilities in India, Germany, and China. The company produces a wide range of products including thermocouples, RTDs, thermowells, cables, heaters, and calibration equipment. Tempsens exports to over 50 countries and has received several awards recognizing its success and contributions to the temperature sensing industry.
Unitherm 2012
Unitherm s.r.o. was founded in 1991 in Jablonec nad Nisou, Czech Republic. It has since expanded to include an aluminium foundry and machine shop. The foundry produces aluminium casts using sand casting and die casting methods. The machine shop machines aluminium casts and other metals using CNC machines. Unitherm has certifications for its quality management and environmental management systems. It produces casts and components for customers in industries like automotive and electronics.
Durchlaufofen mit Abschreckbad Typ SOLO® 302
Förderbandöfen unter Schutzgasatmosphäre mit schneller Abkühlung in verschiedenen Abschreckmedien. Alle SOLO Swiss Öfen sind mit einer feuerfesten Stahlmuffel für präzise Wärmebehandlungen (schnelle Aufbereitung der verschiedenen Prozesse) ausgestattet.
Four continu avec bac de trempe type SOLO® 302
Fours en continu sous atmosphère de protection avec refroidissement rapide dans différents fluides de trempe. Tous les fours SOLO Swiss sont équipés d’un moufle en acier réfractaire pour des traitements thermiques précis (préparation rapide des différents procédés).
More Related Content
Similar to SOLO Swiss Demo center. Test – Expertise – Training – R&D
Berr Process Equipment - 2018-001
BERR Industry provides process equipment design, manufacturing, and commissioning services. They have over 25 years of experience serving industries like oil and gas. Their services include engineering, 3D modeling, manufacturing of items like heat exchangers, cooling towers, filters, and general process equipment. BERR also has extensive workshop facilities for machining, repair, and new product manufacturing. They are a one-stop shop for parts manufacturing, rebuilding, and installation of machinery.
Combustion Engineering
Discussion of available CO/combustion sensing technologies and gas appliance industry views on sensor technology
Allwin21 Product Brochures-2024.5-email.pdf
Allwin21 Brochures for Rapid Thermal Processing equipment, Plasma Asher ,Plasma Descum Equipment, Plasma Etcher, RIE, Sputtering Deposition Equipment, Thin Film Metrology ,semiconductor equipment. Made in USA. All are production proven, the most popular semiconductor process equipment.
Allwin21 Corp. was formed in 2000 with a focus on professionally providing Rapid Thermal Process, Plasma Asher Strip / Descum, Plasma Etch/RIE, Sputter Deposition, and Metal Film Metrology semiconductor equipment, services and technical support in Semiconductor III-V, MEMS, Biomedical, Nanotechnology, Solar, & LED industries. We endeavor to be a leader in our product lines. To achieve this, we have been providing unique innovative and cost-effective technical solutions, high quality equipment, and on time spare parts delivery worldwide. We have maintained a global presence that has grown and expanded into the major high-tech manufacturing areas of the world. We pride ourselves on developing and continuing lasting customer relationships.
We understand that a timely responsive support and service are critical elements in semiconductor industries. Allwin21’s experienced engineer team is the best guarantee for high quality service and support. We provide on-site installation, training, maintenance, system optimization, retrofits, and/or customized upgrades.
For many years AG Associates was the dominant manufacturer of RTP systems. It was founded in 1981 and produced the first single wafer RTP system in 1982, the Heatpulse 210. In 1987, it produced the Heatpulse 610. These RTP systems run at atmospheric pressure and rely on a pre-process nitrogen or argon purge prior to wafer processing. They are still being used around the world in manufacturing, R&D and Universities. These RTP systems have a proven track record for reliability and simplicity.
Allwin21 Corp. is the exclusive licensed manufacturer of AG Associates Heatpulse 610 Rapid Thermal Processing equipment. Allwin21 is manufacturing the new AccuThermo AW Series Atmospheric Rapid Thermal Processors and Vacuum Rapid Thermo Processors.Compared with traditional RTP systems, Allwin21″s AccuThermo AW RTPs have innovative software and more advanced temperature control technologies to achieve the best rapid thermal processing performance ( repeatability , uniformity and Stability etc.).
Allwin21 Product Brochures-Rapid Thermal Processors-2024.5.pdf
Allwin21 Corp. is the exclusive licensed manufacturer of AG Associates Heatpulse 610 Rapid Thermal Processing equipment. Allwin21 is manufacturing the new AccuThermo AW Series Atmospheric Rapid Thermal Processors and Vacuum Rapid Thermal Processors. Compared with traditional RTP systems, Allwin21’s AccuThermo AW RTPs have innovative software and more advanced temperature control technologies to achieve the BEST rapid thermal processing performance (repeatability, uniformity, and stability) with decades of research directly applicable to ours.
You can use MFC2 for wet N2 process with using bubbler on our RTP equipment during steady time. The chamber would be purged with dry N2 using MFC1 at the beginning and end of the process.
Please help fill in the RFQ at our website for suitable production proven Rapid Thermal Processor model and configuration for your applications. Please go through the Q and A if necessary before you fill in the RFQ below. Appreciate your time. Thank you very much.
For many years AG Associates was the dominant manufacturer of RTP systems. It was founded in 1981 and produced the first single wafer RTP system in 1982, the Heatpulse 210. In 1987, it produced the Heatpulse 610. These RTP systems run at atmospheric pressure and rely on a pre-process nitrogen or argon purge prior to wafer processing. They are still being used around the world in manufacturing, R&D and Universities. These RTP systems have a proven track record for reliability and simplicity.
Medical Waste Incinerator | Biomedical Hospital Incinerator Manufactures - Mi...
Microteknik is a leading manufacturer and exporter of scientific and medical equipment, as well as waste management products including incinerators. It has over 5 decades of experience in manufacturing world-class quality products through in-house R&D and customer feedback. It produces a variety of incinerator models for different waste streams, such as bio-medical waste, animal carcasses, sanitary products, poultry waste, and electric waste. The document provides details on one of its bio-medical waste incinerator models, including its design and technical specifications.
METHANOL PLANT - SHALE GAS FEED PRETREATMENT
METHANOL PLANT - SHALE GAS FEED PRETREATMENT
CASE STUDY #091406
Case Background
A Methanol plant operator would like to examine the technical feasibility of using Shale Gas as a feedstock to their Methanol plant.
The first step in the Methanol production process is gas pretreatment. The purpose of gas pretreatment is to make the gas suitable for the downstream processes. There are two groups of compounds that are usually present in natural gas and that should be removed during pretreatment—the associate NGL and the sulfur-containing compounds. Some natural gas reservoirs may also have other trace components that must be removed, but these are not discussed here.
This case study examines the impact of CO2 (Carbon Dioxide) on the pre-treatment section design, performance and efficiency of ACME Methanol Plant’ feed gas pre-treatment section.
Case 1: Normal Shale Gas
Case 2: “Bad Gas”
Case 3: Low CO2
Case 4: High CO2
Industrial Furnaces Energy Efficiency
This document summarizes guidelines for improving the energy efficiency of heat treatment furnaces to reduce their environmental impact. It discusses evaluating the furnace life cycle from material extraction to waste management. The main environmental issue with furnaces is their high energy consumption. Guidelines are provided for improving furnace design, heat treatment processes, process control, operating processes, and maintenance to increase energy efficiency. Adopting these measures can significantly reduce furnace energy usage and waste.
Chandan me
This document provides an overview of Chandan Sharma's summer training at the Bokaro Steel Plant in Jharkhand, India. It discusses the various departments and processes within the plant, including the air separation unit, propane gas unit, protective gas plant, by-product plant, and energy management department. The concluding section reflects on the valuable experience and opportunities provided by the training.
Monnet EL presentation 21 10 11.ppt
The document discusses Eloguard, an eco-friendly boiler feed water treatment. Eloguard is a single product replacement for conventional treatments, providing complete protection to boiler and condensate systems. It forms an impervious film barrier and manages corrosion, scaling and carryover through multiple organic components. Eloguard eliminates drawbacks of conventional treatments like higher blowdown and multiple chemicals. It allows for easier and more cost effective conditioning of boiler feed water.
Boiler & its Pressure Parts
Our project consisted of learning the manufacturing processes & operations of each and every part related to Boiler Manufacturing such as Elements, Panels, Boiler Drum, Header along with its accessories. A brief of it has been attached in this presentation.
METHANOL PRODUCTION USING VULCAN SYSTEMS COMBINED REFORMING TECHNOLOGY (ATR) ...
METHANOL PRODUCTION USING VULCAN SYSTEMS COMBINED REFORMING TECHNOLOGY
CASE STUDY#08270414
Contents
Contents
1 Introduction
2 Autothermal Reforming
2.1 Process Description
3 Gas Heated Reforming (GHR)
CASE STUDY #08270414
4 Plant Equipment List
5 Combined Reforming – ATR / AGHR PFD’s
6 Process Stream Descriptions
7 Combined Reforming Simulation Results*
8 AGHR Output Simulation Results
9 Single Column – Distillation
10 Distillation Column Profiles
Hysys Output*
Aspen Output
11 Scrubbers Simulation Results
12 ATR / AGHR Design Considerations
APPENDIX
FIGURES
Figure 1 Conventional Small Scale Steam Methane Reformer Design
Figure 2 Compact, Tubular, Small Scale Steam Methane Reformer Designed for Fuel Cell Applications, with Convective Heat Transfer
TABLES
Table I Comparison between Different Reformer Concepts
Table 2 Advantages and Disadvantages for Different
Synthesis Gas Technologies
Table 3: Small-Scale Steam Methane Reforming for Syn Gas Generation
Table 4: Small-Scale Autothermal Reformers for SynGas Generation
Table 5: Small-Scale Partial Oxidation for SynGas Generation
Table 6: Small-Scale Methanol Steam Reforming for SynGas Generation
Table 7: Small-Scale [Ammonia Cracking, Sorbent Enhanced
Reforming, Ion Transport Membranes, Catalytic Cracking of Methane, Plasma Reformer] for SynGas Generation
incineration of hazardous wastes
This document discusses incineration of hazardous wastes including types of wastes, strategies for deciding whether incineration is appropriate, technology descriptions of different incineration systems, and considerations for incinerating infectious, chemical, and dedicated waste streams. Key incineration technologies described are fixed hearth, fluidized bed, rotary kiln, and liquid waste incinerators.
Ammonia Synthesis Catalyst Chemistry and Operator Training
The document discusses ammonia synthesis catalysts including their formulation, production, and operation. Key points include:
1) Ammonia synthesis catalysts are typically based on magnetite that is reduced to form a porous iron structure. Promoters like alumina and potash boost activity and stability.
2) Catalyst production involves melting components to control precursor phases before milling to size.
3) The reaction favors high pressure and low temperature. Typical conditions are 350-530°C and 100-600 bar. Temperature and pressure balance kinetics and equilibrium.
Le price training presentation
This document provides information about Kittiwake, a company that manufactures condition monitoring products for various industrial applications including marine, industrial, renewable energy, offshore, and power. It describes Kittiwake's credentials, product offerings for oil, fuel, and water sampling and testing, online condition monitoring sensors, and acoustic emission monitoring. Guidelines are also provided on setting up an effective onsite oil analysis program.
Atmosphere furnaces for metal heat treatment
This document summarizes furnaces and heat treatment systems from SOLO Swiss. It describes bell furnaces that allow automatic transfer of loads between furnaces and quench tanks. The furnaces can process metals through treatments like carburizing, hardening, and tempering. SOLO Swiss manufactures semi-automatic and fully automatic furnace lines in Switzerland and China to serve various industries globally, and provides repair and maintenance services.
Heat treatment presentation
The document describes the various processes involved in finishing heat treatment at a metallurgy laboratory, including furnaces, shot blasting, gate cutting, scarfing, heat treatment, hardness testing, painting, and quality certification. It provides details on the equipment used for each process such as the dimensions and capacities of furnaces, cut-off machines, and testing apparatus.
DEACTIVATION OF METHANOL SYNTHESIS CATALYSTS
DEACTIVATION OF METHANOL SYNTHESIS CATALYSTS
CONTENTS
1 INTRODUCTION
2 THERMAL SINTERING
3 CATALYST POISONING
4 REACTANT INDUCED DEACTIVATION
5 SUMMARY
TABLES
1 DEACTIVATION PROCESSES ON METHANOL SYNTHESIS CATALYSTS
2 MELTING POINT, HUTTIG AND TAMMANN TEMPERATURES OF COPPER, IRON AND NICKEL
3 SINTERING RATE CONSTANTS CALCULATED INLET AND OUTLET SIDE STREAM UNIT FOR VULCAN VSG-M101
4 COMPARISON BETWEEN CALCULATED S∞ AND DISCHARGED MEASUREMENTS ON VULCAN VSG-M101
5 EFFECT OF POSSIBLE CONTAMINANTS AND POISONS ON CU/ZNO/AL2O3 CATALYSTS FOR METHANOL SYNTHESIS
6 GUARD SCREENING TEST RESULTS ON METHANOL MICRO-REACTOR. EFFECT OF DEPOSITED METALS ON METHANOL ACTIVITY
FIGURES
1 THE HΫTTIG AND TAMMANN TEMPERATURES OF THE COMPONENTS OF A SYNTHESIS CATALYST
2 A SCHEMATIC REPRESENTATION OF TWO CATALYST SINTERING MECHANISMS
3 SIDE STREAM DATA FOR VULCAN VSG-M101. INLET TEMPERATURE 242 OC, PRESSURE 1500 PSI, GAS COMPOSITION 6% CO, 9.2% CO2, 66.9% H2, 2.5% N2 AND 15.4% CH4, SPACE VELOCITY 17,778 HR-1. MEAN OUTLET TEMPERATURE 280 OC
4 TEMPERATURE DEPENDENCE OF THE RATE OF SINTERING
5 MECHANISM OF SULFUR RETENTION
6 CORRELATION OF SULFUR CAPACITY WITH TOTAL SURFACE AREA
7 EFFECT OF DEPOSITED (NI+FE) PPM ON METHANOL SYNTHESIS CATALYST ACTIVITY
8 DISCHARGED (FE + NI) DEPOSITION LEVELS ON METHANOL SYNTHESIS PLANT SAMPLES
9 EPMA ANALYSIS OF DISCHARGED LABORATORY SAMPLE OF POISONED VULCAN VSG-M101
10 THE EFFECT OF CO2 ON SYNTHESIS CATALYST DEACTIVATION
REFERENCES
Tempsens_Catlogue
Tempsens Instruments is an ISO 9001 certified company that manufactures temperature sensors and related equipment. It was established in 1976 and has since expanded to include manufacturing facilities in India, Germany, and China. The company produces a wide range of products including thermocouples, RTDs, thermowells, cables, heaters, and calibration equipment. Tempsens exports to over 50 countries and has received several awards recognizing its success and contributions to the temperature sensing industry.
Unitherm 2012
Unitherm s.r.o. was founded in 1991 in Jablonec nad Nisou, Czech Republic. It has since expanded to include an aluminium foundry and machine shop. The foundry produces aluminium casts using sand casting and die casting methods. The machine shop machines aluminium casts and other metals using CNC machines. Unitherm has certifications for its quality management and environmental management systems. It produces casts and components for customers in industries like automotive and electronics.
Similar to SOLO Swiss Demo center. Test – Expertise – Training – R&D (20)
Allwin21 Product Brochures-Rapid Thermal Processors-2024.5.pdf
Allwin21 Product Brochures-Rapid Thermal Processors-2024.5.pdf
Medical Waste Incinerator | Biomedical Hospital Incinerator Manufactures - Mi...
Medical Waste Incinerator | Biomedical Hospital Incinerator Manufactures - Mi...
METHANOL PRODUCTION USING VULCAN SYSTEMS COMBINED REFORMING TECHNOLOGY (ATR) ...
METHANOL PRODUCTION USING VULCAN SYSTEMS COMBINED REFORMING TECHNOLOGY (ATR) ...
Ammonia Synthesis Catalyst Chemistry and Operator Training
Ammonia Synthesis Catalyst Chemistry and Operator Training
More from SOLO Swiss SA
Durchlaufofen mit Abschreckbad Typ SOLO® 302
Förderbandöfen unter Schutzgasatmosphäre mit schneller Abkühlung in verschiedenen Abschreckmedien. Alle SOLO Swiss Öfen sind mit einer feuerfesten Stahlmuffel für präzise Wärmebehandlungen (schnelle Aufbereitung der verschiedenen Prozesse) ausgestattet.
Four continu avec bac de trempe type SOLO® 302
Fours en continu sous atmosphère de protection avec refroidissement rapide dans différents fluides de trempe. Tous les fours SOLO Swiss sont équipés d’un moufle en acier réfractaire pour des traitements thermiques précis (préparation rapide des différents procédés).
Conveyor furnaces with quenching tank type SOLO® 302
Furnaces under protective atmosphere with rapid cooling in different quenching media. All SOLO Swiss furnaces are equipped with a refractory steel muffle for precision heat treatment (fast conditioning of different processes).
Durchlaufofen Typ SOLO® 322
Heizung und Kühlung unter Schutzatmosphäre. Alle Solo Swiss Öfen verfügen über eine Hitzebeständige Stahl Muffel, für eine präzise Wärmebehandlung.
Four continu à bande type SOLO® 322
Chauffe et refroidissement sous atmosphère de protection. Tous les fours SOLO Swiss sont équipés de moufles en acier réfractaire pour un traitement thermique de précision.
Conveyor belt furnace type SOLO® 322
Heating and cooling under protective atmosphere. All SOLO Swiss furnaces are equipped with refractory steel muffles to provide precision heat treatment.
Glockenöfen Typ SOLO Profitherm
Das einzigartige, multifunktionelle Glockenofen Konzept mit mehreren Abschreckbädern ermöglicht einen direkten und schnellen Transfer der Charge vom Ofen bis zum Abschreckbad. Die modulare Bauart ermöglicht jeder Zeit eine Erweiterung und erlaubt Kombinationen mit allerlei Typen von Atmosphären und Abschreckmedien. Temperaturen bis zu 1050°C. Verfügbare Versionen: manuell /
halbautomatisch / vollautomatisch.
Four a cloche type SOLO Swiss Profitherm
Cette combinaison unique et multifonctionnelle de fours à cloche et de plusieurs bacs de trempe permet un transfert automatique direct et rapide de la charge du four vers le bac de trempe. La conception modulaire facilite des extensions éventuelles et tous types d’atmosphères et milieux de trempe. Température jusqu’à 1050°C. Versions disponibles : Manuelles / Semi-automatiques / Entièrement automatiques.
Flyer Bell type furnace SOLO Swiss Profitherm
A unique, multifunctional arrangement of bell furnaces and multiple quench tanks, with a direct and rapid transfer of the load from the furnace(s) to the quench tank. A modular design enables easy expansions with all types of atmospheres and quench media. Temperature up to 1050°C. Available versions: Manual/Semi-automatic/Fully-automated.
Atmosphere furnaces for metal heat treatment_chinese language flyer
SOLO Swiss manufactures advanced industrial furnaces for the heat treatment of metals since 1924.
SOLO Swiss offers atmosphere furnaces, batch furnaces, bell-type furnaces, continuous furnaces, mesh belt furnaces used in variety of heat treatment processes: carburizing, hardening, tempering, annealing, austempering, nitriding, brazing, carbonitriding, sintering, nitrocarburizing, oxinitriding, quenching.
Forni in Atmosfera per il Trattamento Termico dei Metalli
SOLO Swiss è costruttore di forni industriali per il trattamento termico dei metalli dal 1924.
SOLO costruisce forni in atmosfera controllata, forni tipo batch, forni a campana,forni continui, forni a nastro utilizzati in diversi processi di trattamenti termici: cementazione, cementazione accelerata, tempra, ricottura, rinvenimento, brasatura, carbonitrurazione, nitrurazione.
Hornos de Atmósfera para tratamiento térmico de metales
SOLO Swiss fabrica hornos industriales avanzados para el tratamiento térmico de metales desde 1924.
SOLO Swiss ofrece hornos de atmósfera, los hornos de proceso por lotes, hornos de campana, hornos continuos utilizados en una variedad de procesos de tratamiento térmico: cementación, templado, revenido, recocido, transformación bainítica, nitruración, soldadura, carbonitruración, sinterización, nitrocarburación, oxinitruración, temple.
Schutzgasöfen für Wärmebehandlung von Metallen
SOLO Swiss baut moderne Industrieöfen für die Wärmebehandlung von Metallen seit 1924.
SOLO Swiss bietet Schutzgasatmosphären-Öfen, Kammeröfen, Glockenöfen, Durchlauföfen, Förderbandöfen für verschiedene Wärmebehandlungsverfahren: Vergüten, Härten, Aufkohlen, Karbonitrieren, Nitrieren, Nitrokarburieren, Oxinitrieren, Anlassen, Glühen, Löten, Sintern.
Fours sous atmosphère pour le traitement thermique du métal
SOLO Swiss est constructeur de fours industriels pour le traitement thermique des métaux depuis 1924.
SOLO construit des fours sous atmosphère contrôlée de type batch, fours à cloche, fours à pot, fours à moufles, fours de trempe et des fours continus, fours à passage, fours à bande avec trempe en ligne pour une grande variété de traitement thermiques: cémentation, cémentation accélérée, trempe, recuit, revenu, brasage, carbonitruration, nitruration.
SOLO Swiss Service
SOLO Swiss Service: NACHRÜSTUNG - WARTUNG - AUSBILDUNG - NORMKONFORMITÄT.
Mit 100 Jahren Know-how hat SOLO Swiss mehr als 20.000 Öfen weltweit geliefert und
betreut seine Kunden einen Service mit mehrsprachigen technischen Ansprechpartnern.
SOLO Swiss Services
SOLO Swiss Services : RETROFIT
- MAINTENANCE - FORMATION -
MISE EN CONFORMITE.
Avec près de 100 ans de savoir-faire, SOLO Swiss a livré plus de 20’000 fours dans le
monde et assure un service à ses clients avec des interlocuteurs techniques multilingues.
SOLO Swiss Services
SOLO Swiss Services: RETROFIT - MAINTENANCE - TRAINING - COMPLIANCE.
With almost 100 years of know-how, SOLO Swiss has delivered more than 20,000 furnaces worldwide and provides service to its customers with multilingual technical contact persons.
Atmosphere furnaces for metal heat treatment
SOLO Swiss manufactures advanced industrial furnaces for the heat treatment of metals since 1924.
SOLO Swiss offers atmosphere furnaces, batch furnaces, bell-type furnaces, continuous furnaces, mesh belt furnaces used in variety of heat treatment processes: carburizing, hardening, tempering, annealing, austempering, nitriding, brazing, carbonitriding, sintering, nitrocarburizing, oxinitriding, quenching.
Атмосферные печи для термообработки металлов
SOLO Swiss производит передовые промышленные печи для термообработки металлов с 1924 года.
SOLO Swiss предлагает печи с защитной атмосферой, печи периодического действия, колпаковые, проходные, конвейерные печи, используемые в различных процессах термической обработки: науглероживание, закалка, отжиг, отпуск, изотермическая закалка, азотирование, пайка, нитроцементация, нормализация, спекание.
Fornalhos Atmosféricos para Tratamento de Calor de Metal
O documento descreve duas empresas suíças, SOLO Swiss e Borel Swiss, que fabricam fornos industriais para tratamento térmico de metais. A SOLO Swiss fabrica fornos atmosféricos, de lote e contínuos para processos como carborização e temperamento. A Borel Swiss fabrica uma ampla gama de fornos padrão para aplicações como metalurgia e cerâmica. Ambas as empresas oferecem serviços como manutenção e possuem décadas de experiência no setor.
More from SOLO Swiss SA (20)
Conveyor furnaces with quenching tank type SOLO® 302
Conveyor furnaces with quenching tank type SOLO® 302
Atmosphere furnaces for metal heat treatment_chinese language flyer
Atmosphere furnaces for metal heat treatment_chinese language flyer
Forni in Atmosfera per il Trattamento Termico dei Metalli
Forni in Atmosfera per il Trattamento Termico dei Metalli
Hornos de Atmósfera para tratamiento térmico de metales
Hornos de Atmósfera para tratamiento térmico de metales
Fours sous atmosphère pour le traitement thermique du métal
Fours sous atmosphère pour le traitement thermique du métal
Fornalhos Atmosféricos para Tratamento de Calor de Metal
Fornalhos Atmosféricos para Tratamento de Calor de Metal
Recently uploaded
Pressure Relief valve used in flow line to release the over pressure at our d...
Pressure Relief valve used in flow line to release the over pressure at our desired pressure
Mechatronics material . Mechanical engineering
Mechatronics is a multidisciplinary field that refers to the skill sets needed in the contemporary, advanced automated manufacturing industry. At the intersection of mechanics, electronics, and computing, mechatronics specialists create simpler, smarter systems. Mechatronics is an essential foundation for the expected growth in automation and manufacturing.
Mechatronics deals with robotics, control systems, and electro-mechanical systems.
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Generative AI Use cases applications solutions and implementation.pdf
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Accident detection system project report.pdf
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Software Engineering and Project Management - Software Testing + Agile Method...
Software Testing: A Strategic Approach to Software Testing, Strategic Issues, Test Strategies for Conventional Software, Test Strategies for Object -Oriented Software, Validation Testing, System Testing, The Art of Debugging.
Agile Methodology: Before Agile – Waterfall, Agile Development.
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
AI-Based Home Security System : Home security
Home security is of paramount importance in today's world, where we rely more on technology, home
security is crucial. Using technology to make homes safer and easier to control from anywhere is
important. Home security is important for the occupant’s safety. In this paper, we came up with a low cost,
AI based model home security system. The system has a user-friendly interface, allowing users to start
model training and face detection with simple keyboard commands. Our goal is to introduce an innovative
home security system using facial recognition technology. Unlike traditional systems, this system trains
and saves images of friends and family members. The system scans this folder to recognize familiar faces
and provides real-time monitoring. If an unfamiliar face is detected, it promptly sends an email alert,
ensuring a proactive response to potential security threats.
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
Recently uploaded (20)
Pressure Relief valve used in flow line to release the over pressure at our d...
Pressure Relief valve used in flow line to release the over pressure at our d...
Generative AI Use cases applications solutions and implementation.pdf
Generative AI Use cases applications solutions and implementation.pdf
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
5G Radio Network Througput Problem Analysis HCIA.pdf
5G Radio Network Througput Problem Analysis HCIA.pdf
Software Engineering and Project Management - Software Testing + Agile Method...
Software Engineering and Project Management - Software Testing + Agile Method...
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
SOLO Swiss Demo center. Test – Expertise – Training – R&D
- 1. OPTIMISATION PROCESS DEMO Center TEST – EXPERTISE – TRAINING – R&D DEMO CENTER DEMO CENTER TEST - R&D expertise TRAINING EQUIPMENT Metal Heat Treatment www.soloswiss.com/metallurgy
- 2. METALLURGY Copper alloys, aluminum alloys, carbon steels, low alloyed steels, alloyed steels, stainless steels, titanium alloys, nickel alloys, precious metals. ATMOSPHERES Flammable gases: Hydrogen, Cracked ammonia, Methanol, Propane, Methane. Inert gases: Nitrogen / Argon / Helium. Oxidizing Gases: Air / Oxygen / Carbon Dioxide. ATMOSPHERE CONTROLLED HEAT TREATMENTS Annealing, hardening, tempering, brazing, carburizing, carbonitriding, nitriding, nitrocarburizing, oil / salt hardening. EXPERTISE TEST - R&D DIMENSIONS OF PROCESSED PARTS Up to 60 cm and 65 kg. CONTROLLING PROCESS PARAMETERS O2 probe, CO / CO2 / CH4 analyzer, oximeter, dew point, pyrometry (temperature monitoring on part and according to specific requests). Quality report Hardness measurement (Hv, HRC), microstructure con- trol, deformation control. COMPLIANCE WITH INTERNATIONAL STANDARDS CQI-9, AMS 2750E. AT DEMO CENTER OR ON PRODUCTION SITE Tests for study, development or pre-production. Assistance and metallurgical expertise. Process optimization: improvement of material properties, increased productivity, reproducibility, definitions of heat treatment ranges. Reduction of consumption and emissions. Compliance (safety and environment) of your furnaces. The DEMO CENTER team consists of 4 qualified metallurgists, 2 material engineers, a safety & standards engineer and an Industry 4.0 engineer with a total of 140 years of experience at SOLO Swiss.
- 3. TRAINING EQUIPMENT METALLURGY & THERMAL TREATMENT Heat treatment basis, atmospheres used in heat treatment, how insure safety in heat treatment workshop and operations. BY ACTIVITY / INDUSTRY Heat treatment in watchmaking and micromechanics, heat treatment in medical, automotive and aeronautics. QUALITY Metallographic analyzes and controls. INTER-COMPANY TRAINING According to the annual program (max. 15 participants): theoretical classroom training with implementation on the DEMO CENTER equipment. TRAINING ON CUSTOMER SITE DEMO Center is a member of CHARACTERIZATION EQUIPMENT Cutting, coating, polishing for sample preparation. Hardness (HRC) / micro hardness (Hv). Optical microscopy (Olympus BX53M x 1000). Image analysis with Stream software (structure and microstructure, decarburization, grain size). 15 HEAT TREATMENT FURNACES SOLO P80 carburizing / hardening / carbonitriding furnace, oil quenching, salt quenching. Continuous furnace SOLO 322-10/80. BOREL retort furnaces 650 °C and 1100 °C. Tilting furnace BOREL 1050 °C with oil quenching. BOREL chamber furnaces with removable shovel under protective gas. Various ovens and BOREL ovens from 200 °C to 1500 °C. In agreement with our partners, tests on SOLO or BOREL furnaces currently in service are also possible on request. Swiss federation for continuing training The courses are taught in French, English, German or Italian.
- 4. SWITZERLAND FRANCE GERMANY AUSTRIA ITALY Zurich Porrentruy Bern Geneva DEMO CENTER DEMO CENTER / SOLO Swiss SA Grandes-Vies 25, 2900 Porrentruy – Switzerland Tel. +41 32 465 96 00 Fax +41 32 465 96 05 metallurgy@soloswiss.com www.soloswiss.com/metallurgy