This document provides a project report on developing a solar city. It introduces the problem of relying on non-renewable energy sources and proposes focusing on solar energy. The objectives are to save energy, reduce environmental impact through a cleaner energy source, and enable easy installation of solar technologies. The report covers literature on various solar solutions like streetlights, solar fabrics, floating solar panels, and more. It discusses India's growing solar industry and potential. The conclusion is that solar energy can replace fossil fuels if costs continue decreasing and technologies improve.
Renewable energy is making its move. Eighteen percent of all electricity in the United States was produced by renewable sources in 2017, including solar, wind and hydroelectric dams. That’s up from 15 percent in 2016.
According to data released by the International Renewable Energy Agency (IRENA), by the end of 2017, global renewable generation capacity increased by 167 GW (gigawatts) and reached 2,179 GW worldwide. This represents a yearly growth of around 8.3 percent, the average for seven straight years in a row.
According to the National Renewable Energy Laboratory and the Department of Energy, renewable energy is important because of:
Environmental Benefits
It’s A Finite Source
More Jobs, Economy Boost
Increased Energy Security
Renewable Energy Training
Tonex offers hands-on training courses in renewable energy:
—Renewable Energy Certificate/Renewable Energy Training Program
—Renewable Energy Training Bootcamp
Participants learn about all the various forms of renewable energy as well as cutting edge topics in the renewable energy field, such as:
Grid Interconnection
Microgrids
Distributed Energy Storage
Distributed Energy Grids
Advanced Vehicles & Fuels
Green Building Entrepreneurship
Politics and Economics of International Energy and Global Energy and Climate Policy
Transmission Systems for Renewable Energy
Compare Renewable Energy/Electricity Hedging, Trading, Futures, Options & Derivatives
Who Should Attend Renewable Energy Training:
Engineers, technicians, analysts, managers, non-engineering professionals and planners will all benefit from staying current in renewable energy.
Learn more about Renewable Energy
https://www.tonex.com/renewable-energy-training/
This ppt represents the study of solar power tower as well as continuing technology development, in order to update the
technical and economical status of molten-salt solar power tower. It has endeavoured to explain the solar power tower
with an overview of energy, form of energy, what is renewable energy, solar energy, and solar thermal. The second section discusses History of solar power tower development. The third section presents progression from solar one to solar Two. The fifth section details of the molten-salt – what is molten-salt and its properties. The sixth section details of components of solar power tower- Heliostat system, receiver system, thermal storage system, steam generator system and electric generation system. In seventh section discuss about advantage of solar power tower. The opportunity in India of this concept has discussed in eighth section. The ninth section discusses various research and development of solar components. In final Section summarize the successes of solar power tower and current technology development activities.
Renewable energy is making its move. Eighteen percent of all electricity in the United States was produced by renewable sources in 2017, including solar, wind and hydroelectric dams. That’s up from 15 percent in 2016.
According to data released by the International Renewable Energy Agency (IRENA), by the end of 2017, global renewable generation capacity increased by 167 GW (gigawatts) and reached 2,179 GW worldwide. This represents a yearly growth of around 8.3 percent, the average for seven straight years in a row.
According to the National Renewable Energy Laboratory and the Department of Energy, renewable energy is important because of:
Environmental Benefits
It’s A Finite Source
More Jobs, Economy Boost
Increased Energy Security
Renewable Energy Training
Tonex offers hands-on training courses in renewable energy:
—Renewable Energy Certificate/Renewable Energy Training Program
—Renewable Energy Training Bootcamp
Participants learn about all the various forms of renewable energy as well as cutting edge topics in the renewable energy field, such as:
Grid Interconnection
Microgrids
Distributed Energy Storage
Distributed Energy Grids
Advanced Vehicles & Fuels
Green Building Entrepreneurship
Politics and Economics of International Energy and Global Energy and Climate Policy
Transmission Systems for Renewable Energy
Compare Renewable Energy/Electricity Hedging, Trading, Futures, Options & Derivatives
Who Should Attend Renewable Energy Training:
Engineers, technicians, analysts, managers, non-engineering professionals and planners will all benefit from staying current in renewable energy.
Learn more about Renewable Energy
https://www.tonex.com/renewable-energy-training/
This ppt represents the study of solar power tower as well as continuing technology development, in order to update the
technical and economical status of molten-salt solar power tower. It has endeavoured to explain the solar power tower
with an overview of energy, form of energy, what is renewable energy, solar energy, and solar thermal. The second section discusses History of solar power tower development. The third section presents progression from solar one to solar Two. The fifth section details of the molten-salt – what is molten-salt and its properties. The sixth section details of components of solar power tower- Heliostat system, receiver system, thermal storage system, steam generator system and electric generation system. In seventh section discuss about advantage of solar power tower. The opportunity in India of this concept has discussed in eighth section. The ninth section discusses various research and development of solar components. In final Section summarize the successes of solar power tower and current technology development activities.
solar water heating system - types and mechanismlee shin
solar is one of the trending technology getting into use which reduces the utility bills and bring more beneficial factor through its eco friendly method
Seminar report on Flexible Photovoltaic TechnologyKumudGarg3
This report is relate to topic of Flexible Solar Cell. In this report you get content is introduction, introduction to flexible solar cell, types of solar cell, types of flexible solar cell, application n etc.
An entrepreneurial approach (Business Plan) towards sustainability and renewable energy by implementing appropriate measures and techniques to resolve the existing issue of electricity crisis and aiming at sustainable development.
solar water heating system - types and mechanismlee shin
solar is one of the trending technology getting into use which reduces the utility bills and bring more beneficial factor through its eco friendly method
Seminar report on Flexible Photovoltaic TechnologyKumudGarg3
This report is relate to topic of Flexible Solar Cell. In this report you get content is introduction, introduction to flexible solar cell, types of solar cell, types of flexible solar cell, application n etc.
An entrepreneurial approach (Business Plan) towards sustainability and renewable energy by implementing appropriate measures and techniques to resolve the existing issue of electricity crisis and aiming at sustainable development.
An entrepreneurial approach (Business Plan) towards sustainability and renewable energy by implementing appropriate measures and techniques to resolve the existing issue of electricity crisis and aiming at sustainable development
THE CHALLENGE FOR THE 21. CENTURY Day by day we hear more disturbing news about the “Climate Change” that is happening all over the world. More and more people are getting seriously impacted by increasingly strong and more frequent hurricanes. We hear about unprecedented droughts in one area while there is severe flooding in another. People are forced to leave entire regions due to desertification of the land.
Solar Energy.
Solar energy is the energy obtained by capturing heat and light from the Sun.
Solar Energy is energy (light or heat) that comes from the sun.
Importance of Solar Energy in Day to Day Lifeijtsrd
The natural world has used the sun’s energy since the beginning of time, and while there has been lots of discussion about this, the truth is that the sun is both a problem and a solution. Solar energy is an unchanging constant – a staple in Earth’s very existence. The sun may not have changed, but our understanding of it has. We are now harnessing its energy to replace traditional methods that have taken a toll on the planet. Instead of burning fossil fuels like coal and natural gas, consumers can take advantage of the infinite energy of the sun to power homes, cars, and appliances. Explore these five everyday uses of solar energy to see how this resource can transform your future, not just the future. Prof. Saurabh A. Bobde | Prof. Satish Sonwane | Prof. Pravin G. Dhawale "Importance of Solar Energy in Day to Day Life" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30399.pdf Paper Url :https://www.ijtsrd.com/engineering/mechanical-engineering/30399/importance-of-solar-energy-in-day-to-day-life/prof-saurabh-a-bobde
The Solar Revolution, A Comprehensive Guide.
If you're interested in renewable energy and want to learn more about solar power, this ebook is the perfect resource for you. "Everything You Need to Know About Solar Power" covers all aspects of solar power, from the basics of how it works to the technical details of installation and maintenance, as well as its environmental impact and future potential.
In the first section, you'll find a comprehensive introduction to solar power, including a definition of solar power, its importance in today's world, and a brief history of solar power. In the following section, you'll gain a deeper understanding of solar power, including how it works, the types of solar power systems available, and their advantages and disadvantages.
The technical aspects of solar power are explored in detail in the third section, including solar panel construction and components, installation and maintenance of solar panels, and solar power system sizing and design. You'll also learn about the technical terminology and jargon used in the solar power industry.
The environmental impact of solar power is examined in the fourth section, including the reduction of greenhouse gas emissions, the impact on natural habitats and wildlife, and the relationship between solar power and climate change. Real-life examples and case studies are provided to help you understand the impact of solar power on the environment.
In the fifth section, you'll discover the future of solar power, including the latest innovations in solar technology, global trends in solar power, and the challenges and opportunities facing the solar power industry. Real-life examples and case studies are also included to help you understand the potential of solar power in the future.
Finally, the ebook concludes with a section that ties everything together, including the future of solar power, final thoughts on solar power, and encouragement to take action.
Whether you're interested in installing solar power in your home or business, or just want to learn more about renewable energy, this ebook is an essential guide to solar power. With detailed information, real-life examples, and case studies, you'll have all the information you need to understand the basics of solar power and its potential for the future.
Solar energy technologies refer primarily to the use of solar radiation for practical ends. All other renewable energies other than geothermal derive their energy from energy received from the sun.
Solar technologies are broadly characterized as either passive solar or active solar depending on the way they capture, convert and distribute sunlight. Active solar techniques include the use of photovoltaic modules (also called photovoltaic panels) and solar thermal collectors (with electrical or mechanical equipment) to convert sunlight into useful outputs. Passive solar techniques include orienting a building to the Sun, selecting materials with favorable thermal mass or light dispersing properties, and designing spaces that naturally circulate air.
Dc House An Alternate Solution for Rural Electrificationijtsrd
In today's date, India is a large consumer of fossil fuel such as coal, crude oil etc. The rapid increase in use of Non renewable energies such as fossil fuel, oil, natural gas has created problems of demand and supply. Because of which, the future of Non renewable energies is becoming uncertain. Now a day's electricity is most needed facility for the human being. All the conventional energy resources are depleting day by day. So we have to shift from conventional to non conventional energy resources. In this the combination of two energy resources is takes place i.e. wind and solar energy. This process reviles the sustainable energy resources without damaging the nature. We can give uninterrupted power by using hybrid energy system. Basically this system involves the integration of two energy system that will give continuous power. Solar panels are used for converting solar energy and wind turbines are used for converting wind energy into electricity. This electrical power can utilize for various purpose. Generation of electricity will be takes place at affordable cost. This paper deals with the generation of electricity by using two sources combine which leads to generate electricity with affordable cost without damaging the nature balance. Preeti Pawar Patil | Rutuja Kole Patil | Nikita Patil ""Dc House: An Alternate Solution for Rural Electrification"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23279.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23279/dc-house-an-alternate-solution-for-rural-electrification/preeti-pawar-patil
Professional air quality monitoring systems provide immediate, on-site data for analysis, compliance, and decision-making.
Monitor common gases, weather parameters, particulates.
What is greenhouse gasses and how many gasses are there to affect the Earth.moosaasad1975
What are greenhouse gasses how they affect the earth and its environment what is the future of the environment and earth how the weather and the climate effects.
Multi-source connectivity as the driver of solar wind variability in the heli...Sérgio Sacani
The ambient solar wind that flls the heliosphere originates from multiple
sources in the solar corona and is highly structured. It is often described
as high-speed, relatively homogeneous, plasma streams from coronal
holes and slow-speed, highly variable, streams whose source regions are
under debate. A key goal of ESA/NASA’s Solar Orbiter mission is to identify
solar wind sources and understand what drives the complexity seen in the
heliosphere. By combining magnetic feld modelling and spectroscopic
techniques with high-resolution observations and measurements, we show
that the solar wind variability detected in situ by Solar Orbiter in March
2022 is driven by spatio-temporal changes in the magnetic connectivity to
multiple sources in the solar atmosphere. The magnetic feld footpoints
connected to the spacecraft moved from the boundaries of a coronal hole
to one active region (12961) and then across to another region (12957). This
is refected in the in situ measurements, which show the transition from fast
to highly Alfvénic then to slow solar wind that is disrupted by the arrival of
a coronal mass ejection. Our results describe solar wind variability at 0.5 au
but are applicable to near-Earth observatories.
Seminar of U.V. Spectroscopy by SAMIR PANDASAMIR PANDA
Spectroscopy is a branch of science dealing the study of interaction of electromagnetic radiation with matter.
Ultraviolet-visible spectroscopy refers to absorption spectroscopy or reflect spectroscopy in the UV-VIS spectral region.
Ultraviolet-visible spectroscopy is an analytical method that can measure the amount of light received by the analyte.
Earliest Galaxies in the JADES Origins Field: Luminosity Function and Cosmic ...Sérgio Sacani
We characterize the earliest galaxy population in the JADES Origins Field (JOF), the deepest
imaging field observed with JWST. We make use of the ancillary Hubble optical images (5 filters
spanning 0.4−0.9µm) and novel JWST images with 14 filters spanning 0.8−5µm, including 7 mediumband filters, and reaching total exposure times of up to 46 hours per filter. We combine all our data
at > 2.3µm to construct an ultradeep image, reaching as deep as ≈ 31.4 AB mag in the stack and
30.3-31.0 AB mag (5σ, r = 0.1” circular aperture) in individual filters. We measure photometric
redshifts and use robust selection criteria to identify a sample of eight galaxy candidates at redshifts
z = 11.5 − 15. These objects show compact half-light radii of R1/2 ∼ 50 − 200pc, stellar masses of
M⋆ ∼ 107−108M⊙, and star-formation rates of SFR ∼ 0.1−1 M⊙ yr−1
. Our search finds no candidates
at 15 < z < 20, placing upper limits at these redshifts. We develop a forward modeling approach to
infer the properties of the evolving luminosity function without binning in redshift or luminosity that
marginalizes over the photometric redshift uncertainty of our candidate galaxies and incorporates the
impact of non-detections. We find a z = 12 luminosity function in good agreement with prior results,
and that the luminosity function normalization and UV luminosity density decline by a factor of ∼ 2.5
from z = 12 to z = 14. We discuss the possible implications of our results in the context of theoretical
models for evolution of the dark matter halo mass function.
Slide 1: Title Slide
Extrachromosomal Inheritance
Slide 2: Introduction to Extrachromosomal Inheritance
Definition: Extrachromosomal inheritance refers to the transmission of genetic material that is not found within the nucleus.
Key Components: Involves genes located in mitochondria, chloroplasts, and plasmids.
Slide 3: Mitochondrial Inheritance
Mitochondria: Organelles responsible for energy production.
Mitochondrial DNA (mtDNA): Circular DNA molecule found in mitochondria.
Inheritance Pattern: Maternally inherited, meaning it is passed from mothers to all their offspring.
Diseases: Examples include Leber’s hereditary optic neuropathy (LHON) and mitochondrial myopathy.
Slide 4: Chloroplast Inheritance
Chloroplasts: Organelles responsible for photosynthesis in plants.
Chloroplast DNA (cpDNA): Circular DNA molecule found in chloroplasts.
Inheritance Pattern: Often maternally inherited in most plants, but can vary in some species.
Examples: Variegation in plants, where leaf color patterns are determined by chloroplast DNA.
Slide 5: Plasmid Inheritance
Plasmids: Small, circular DNA molecules found in bacteria and some eukaryotes.
Features: Can carry antibiotic resistance genes and can be transferred between cells through processes like conjugation.
Significance: Important in biotechnology for gene cloning and genetic engineering.
Slide 6: Mechanisms of Extrachromosomal Inheritance
Non-Mendelian Patterns: Do not follow Mendel’s laws of inheritance.
Cytoplasmic Segregation: During cell division, organelles like mitochondria and chloroplasts are randomly distributed to daughter cells.
Heteroplasmy: Presence of more than one type of organellar genome within a cell, leading to variation in expression.
Slide 7: Examples of Extrachromosomal Inheritance
Four O’clock Plant (Mirabilis jalapa): Shows variegated leaves due to different cpDNA in leaf cells.
Petite Mutants in Yeast: Result from mutations in mitochondrial DNA affecting respiration.
Slide 8: Importance of Extrachromosomal Inheritance
Evolution: Provides insight into the evolution of eukaryotic cells.
Medicine: Understanding mitochondrial inheritance helps in diagnosing and treating mitochondrial diseases.
Agriculture: Chloroplast inheritance can be used in plant breeding and genetic modification.
Slide 9: Recent Research and Advances
Gene Editing: Techniques like CRISPR-Cas9 are being used to edit mitochondrial and chloroplast DNA.
Therapies: Development of mitochondrial replacement therapy (MRT) for preventing mitochondrial diseases.
Slide 10: Conclusion
Summary: Extrachromosomal inheritance involves the transmission of genetic material outside the nucleus and plays a crucial role in genetics, medicine, and biotechnology.
Future Directions: Continued research and technological advancements hold promise for new treatments and applications.
Slide 11: Questions and Discussion
Invite Audience: Open the floor for any questions or further discussion on the topic.
Nutraceutical market, scope and growth: Herbal drug technologyLokesh Patil
As consumer awareness of health and wellness rises, the nutraceutical market—which includes goods like functional meals, drinks, and dietary supplements that provide health advantages beyond basic nutrition—is growing significantly. As healthcare expenses rise, the population ages, and people want natural and preventative health solutions more and more, this industry is increasing quickly. Further driving market expansion are product formulation innovations and the use of cutting-edge technology for customized nutrition. With its worldwide reach, the nutraceutical industry is expected to keep growing and provide significant chances for research and investment in a number of categories, including vitamins, minerals, probiotics, and herbal supplements.
A brief information about the SCOP protein database used in bioinformatics.
The Structural Classification of Proteins (SCOP) database is a comprehensive and authoritative resource for the structural and evolutionary relationships of proteins. It provides a detailed and curated classification of protein structures, grouping them into families, superfamilies, and folds based on their structural and sequence similarities.
1. Savitribai Phule Pune University
A Project Based Learning Report
SOLAR CITY
By
Om Joshi
Rutik Rathod
Kaustubh Mahandule
Tushar Survase
Anirudha Wagholikar
Vaibhav Bhalerao
Guide by-
Prof. R. F. Dunde
PES’s Modern College of Engineering
First Year Engineering
2020-21
2.
3. CERTIFICATE
Certified that this project report “ SOLAR CITY” is the Bonafide work
OM JOSHI
RUTIK RATHOD
KAUSTUBH MAHANDULE
TUSHAR SURVASE
ANIRUDHA WAGHOLIKAR
VAIBHAV BHALERAO
who carried out the project work under my supervision.
Prof. R. F. Dunde Mrs. K. R. Joshi
Head of Department Principle
MCHANICAL ENGINEERING
PES’s Modern College of Engineering
Savitribai Phule Pune University
4. ACKNOWLEDGEMENT
I would like to express my special thanks of gratitude to my project guide
Prof. R.F. Dunde as well as our principal Mrs. K. R. Joshi who gave me the golden
opportunity to do this wonderful project on the topic SOLAR CITY, which also
helped me in doing a lot of research and i came to know about so many new things
I am really thankful to them.
Secondly I would also like to thank my parents and friends who helped me a
lot in finalizing this project within the limited time frame.
Date : 16-07-2021
Place : PES Modern College of
Engineering
5. TABLE OF CONTENTS
TITLE
LIST OF FIGURES vi
CONTENT vii
1.0 INTRODUCTION 9
1.1 Solar and India
2.0 PROBLEM STATEMENT 12
3.0 OBJECTIVES 13
3.1 Energy saving
3.2 Environmental impact
3.3 Installation
3.4 Economical Impact
4.0 METHODOLOGY 15
5.0 ORGANIZATION OF REPORT 16
6. 6.0 LITERATURE REVIEW
6.1 Streetlight
6.2 Solar fabrics
6.3 Floating Solar Panels
6.4 Solar Roadways
6.5 Solar car
17
7.0 FUTURE SCOPE 27
CONCLUSION
REFERENCES
30
7. LIST OF FIGURES
FIG. NO FIG. NAME PURPOSE REFERENCES
1 PHOTOVOLTIC POWER
POTENTIAL
TO SHOW AMOUNT OF
SOLAR ENERGY
PRODUCIBLE AS PER
REGION
2020 The World
Bank, Source:
Global Solar Atlas
2.0, Solar resource
data
2 SURVEY OF SOLAR
ENERGY PRODUCTION
ENERGY PRODUCTION
BY COUNTRIES IN %
https://en.wikipedia.co
m
8.
9. ABSTRACT
Solar energy is inexhaustible, freely available and clean source of energy generation. The solar
energy production system generates variable output, its operation depends upon the solar
irradiance. As per the upcoming theories and researches solar energy is the one of the best option
that we have to be independent on fossil fuels and other non-renewable sources. From last two
decades solar energy production and their distribution has raised by 37% which is shown by global
energy producing agencies. Nowadays there are too many solar energy generation devices are
present in global market and in this project we had studied some of those energy production
devices. Moreover, solar energy is extremely environment friendly because it can reduce 40
million tons of CO2 emissions each year with the inception of solar grids that meet only 1% of
electric energy demand around world. Currently, solar cells, solar power plants and solar collectors
are some of the practical applications of harvesting solar energy to fulfil clean energy demand of
world . For solar energy to be considered as major renewable energy contributor, the devices used
in its generation must be improved in terms of their performance because the revolutionary
developments in this field are possible only if conversion, storage and utilization are done
effectively.
10. 1. INTRODUCTION
The large usage of the fossil fuels, like the oil, the gas and the coal, results in greenhouse
effect and pollutes the atmosphere. Meanwhile, there is a huge conflict between the fossil
fuels supply and the global energy demand leading to a hike oil price in the market. The
energy shortage and the atmosphere pollution have been the major limitations for thehuman
development. In order to meet the rising global energy demand from environmental
friendly sources, various renewable energy are given attention.
Energy produced and radiated by sun is known as solar energy. This solar energy can be
converted directly or indirectly into other forms of energy such as heat and electricity.
Now it has been proved that the solar energy can be stored by either of these methods:
I. By producing hydrogen and storing it.
ii. By storing it in mechanical or electrical devices.
iii. By storing it in containers of chemicals called eutectic or phase changing salts.
Most of the energy is received from the Sun in the form of short wave radiations of light. When
this radiation strikes a solid or liquid, it gets absorbed and transformed into heat energy. This heat
energy is either stored (warming the material) or is conducted to the surrounding materials (air,
water etc.) or is re-radiated (in the form of a long wave radiation) to the other material having
relatively lower temperature.
Glass possess very little interference to the incoming solar energy i.e. it easily transmits short wave
radiation whereas it is a very poor transmitter of long wave radiation i.e. once the solar energy has
passed through the glass and has been absorbed by some material (black painted surface) inner to
it, then the heat will not be re-radiated back, out of the glass (thus glass acts as a heat trap).
This is the physical principle for the conversion of solar energy into heat energy.
12. 1.1 Solar energy and India
Solar power in India is a fast-developing industry as part of the renewable energy in India. The
country's solar installed capacity was 40.09 GW as of 31 March 2021.
https://en.wikipedia.com
Fig.2
Solar products have increasingly helped to meet rural needs; by the end of 2015 just under one
million solar lanterns were sold in the country, reducing the need for kerosene. That year,
118,700 solar home lighting systems were installed and 46,655 solar street lighting installations
were provided under a national program. Which means as the population is increasing the
demand for energy is also increasing it means in India there will be biggest opportunity for solar
energy production.
13. 2 Problem Statement
Problem
Today, the whole world uses electricity - it’s impossible to imagine a life without it. We depend
on it for refrigeration, heating, transportation, hospitals, communication systems and many other
essential services that maintain our way of life. The major sources of electricity production that
we utilize are coal and oil, both of which produce pollutants to the atmosphere and the
environment. By relying on these nonrenewable energy sources, the price of energy will increase
exponentially, and eventually be too expensive to incorporate into power stations. We had
acknowledged this pressing issue and has decided to focus on solar energy to replace
nonrenewable resources. With improved and more advanced solar panels being designed each
year, there is a way out of the fossil fuel slope as solar energy becomes as cost efficient as coal
and oil. However, with this new field there are many problems to tackle before it can take its
place as the leading energy source. We want to assist in solving one of solar energy’s pressing
issues that plague all solar panels, the vulnerability of solar panels being exposed to erosion and
piling-up of debris.
Significance
Much of solar cell research is funneled into increasing the efficiency of the solar cell. However,
this research is sparked in part by the lack of a solar cell’s ability to maintain efficiency due to
inner circuitry decay and exterior conditions. Environmental debris plays a significant role as it
is the condition in which we humans have the least control over, but can be easily remedied.
There are three main reasons why our solution is needed:
1) Solar panels put in the desert can easily be covered by fine particles of sand due to the wind.
Sand coating can decrease solar cell efficiency by 15%.
2) The high cost of maintenance is a deterrent to some looking to buy into the industry
(solarpoweristhefuture.com).
3) Current solar panel owners could save $5,000-$10,000 a year with a cheap cleaning system
(winsol.com).
14. 3 Objectives
1) Energy Saving-
The usage of electricity is commensurate with the energy costs. It therefore means that the more
you use electricity, the more you’ll have to pay for it. To make matters worse, we are in an age
where almost all our essential tech devices need constant charge to function as desired. For this
reason, electricity bills will continue to amount as long as we continue depending on our tech
devices to carry out our day-to-day activities.
Fortunately, the sun offers a reliable and affordable alternative source of power. Because the sun
freely exists and is inexhaustible, it can be harnessed and used to provide for our daily power
needs. Solar utilizes lower powered items such as LED / CFL lamps, lower powered electronics,
etc. that do not use as much power as standard electric systems. Also, LEDs are powered from 12
VDC initially and require AC adapters to power with standard electric. By using DC power for
LEDs, they are able to operate more efficiently by providing lighter and less heat. In this way
electricity can be saved.
2) Eco-Friendly-
To promote ecologically sustainable growth while addressing India’s energy security challenges.
To create enabling environment for penetration of solar technology throughout the country we
have to come forward to do our best for society and mother nature. Solar energy is purest form of
energy. It helps to reduce pollution, carbon dioxide, Sulphur dioxide and too many hazardous gases
which are killing us from last too many decades, going solar is the best option to save environment.
3) Easy Installation-
Solar panels are easy to install, typically only needing a few bolts to hold them secure and some
basic wiring. It has very simple mechanism, no complicated working and their life spam is also
very high they are easy to handle, and if we talk about new upcoming technologies like solar
fabrics, charger, power bank, solar cover etc. Are too much easy to carry. They are very easy to
transportation and they do not need to install.
15. 4) Economical impact-
increasing adoption of the solar energy in India, the demand for modules, inverters and allied
hardware is also growing. However, there has a huge dependency on imports from China, Vietnam,
Europe etc. Made in India boost will create a positive impact on our economy and reduce our
dependency on imports. Manufacturing industries will require skilled professionals to meet high
demand, thus creating and providing employment in this sector. According to the International
Renewable Energy Agency (IRENA), the Indian solar sector created 1,15,000 employment
opportunities in 2018 and it will continue to increase in coming years. Adoption of solar energy
transforms multiple problem areas into opportunities. This would fuel the economic growth, boost
up made in India mission and create employment while making the world greener.
Solar is commercially viable and environmentally responsible! Just go for it.
16. 4 Methodology-
In this project of SOLAR CITY, we are trying to reach the all-possible ways to produce energy in
maximum amount with the help of solar energy, which Is abundant on our earth. We are mainly
focusing on making devices to concentrate and harness maximum amount energy from sun to make
our earth pollution free, free to use, easily renewable, easy to use, handle, we can use all over the
globe, with replacing the fossil fuels which are non-renewable.
In our project we are working on solar fabrics, solar car, floating solar panels, solar agriculture
equipment, solar home, solar roadways, solar street light and many more with the help of new
technologies, research book, journals and applying practical knowledge. We are mainly focusing
on complete this project in cheapest amount as possible and making them more energy efficient.
5 Organization of Report-
The main goal of this project is to make all possible scientific equipment to harness solar energy
more efficient and produce more sufficiently which is easily producible and convertible. As the
outcome of this project there will be more economical benefits to whole world like infinite amount
of energy source, more employability, green energy, energy balancing etc.
17. 6 Literature review-
When we think of solar panels, chances are we think of roofs or giant arrays of glimmering
panels in the desert. However, advances in photovoltaic (PV) technologies over the last decade
have made possible many more smaller-scale applications for everyday living, on a more
personal level. Improvements in design and configuration, energy storage, efficiency, and battery
size have created opportunities for solar energy in a variety of situations, some of which you
have probably not considered—including off-grid scenarios that can help you survive emergency
situations. Below are nine examples of innovative, low-cost ways solar energy is being used to
enhance our daily lives.
Streetlights-
More cities across the world are powering streetlights with solar energy. The sun charges the
batteries during the day, which then powers light-emitting diodes (LEDs) at night to illuminate
the streets. San Diego is incorporating smart sensors into streetlights that can even direct drivers
to open parking spaces and help first responders during emergency situations. Combining
internet-linked sensors with solar powered streetlights saves both time and money.
There is no additional electricity cost because the panels in a solar street light convert the solar
power into electricity. It is also quick and easy to charge the batteries and they last for almost 5
years. And since the poles are wireless it is simple to install and there is no additional cost of hiring
too many workers. The LED’s used in these lights provide clear visibility at night. They are colored
to match up with the desired color rendering index to resemble the sunlight during the daytime.
This clear light also helps the pedestrians and the vehicles to avoid accidents.
18. They are designed in a way that as soon as it detects that the ambient light is not enough. In the
case of low lights, the LED’s are automatically switched on. So sensing the outdoor light the solar
lights automatically switch either on or off. This feature is really marvelous because it uses a
special lens which helps to adjust the brightness level based on the battery voltage and running
time. This helps to increase the backup time of the light. It is the responsibility of each and every
individual to take care of the environment. The invention of these lights exactly helps in
minimizing the amount of waste and reduces carbon footprints. The LED’s used in these lights
contains no toxic elements and so it helps to protect the environment from any toxic waste. In areas
where there is no traffic in the night, it is not necessary to have the street lights switched on the
whole night. Motion sensor helps in saving energy as it detects any motion either of a pedestrian
or of a vehicle and switches all the LED’s on. Also, another smart feature that this motion sensor
has is that if it detects that there is no motion for more than 16 seconds, then all the LED’s will
automatically reduce brightness. Some of the solar street lights are also powered by footsteps
which mean that the batteries get charged from the kinetic energy powered by the pedestrians’
footsteps. Our product, Zonstreet Plus, comes with inbuilt Lithium-ion battery and motion sensors.
Solar street lights can be operated and controlled either by a mobile phone or a computer from any
location. This feature helps in adjusting settings of the light either to dim the light or to increase
the brightness from a remote place without physically being present at the location. It also provides
information in real time and helps to determine if there are any problems or if the light is out of
order even before a complaint is received from the public. This system makes it easy to check on
the status of the solar voltage, the battery voltage also provides data for the previous day usage of
the voltage. This saves a lot of energy and does not require any worker to manually check on it.
Zonstreet GSM, one of our innovative products comes with inbuilt GSM card. It can be remotely
monitored and controlled using the smartphone.
These are some features of solar street lights which make it a better option over a traditional street
light. We can confidently say that solar-powered lights will inevitably be the street lights of the
19. future. And investing and installing in these will play a major part in a clean, green environment.
This will also contribute to a brighter future for the coming generations.
Solar Fabric-
Solar fabric is an application of solar technology with a wide range of applications. Solar cells are
woven into textile fibers and generate convenient solar electricity. “One version, created by FTL
Solar, can literally be pitched like a tent to provide both shelter and electricity,” writes Hicks.
“Consider the endless possibilities: military, rescue operations, disaster relief, recreational options,
medical units, and even temporary housing. Any place you need flexible convenient solar power,
solar fabric is your answer.” Solar Fabric is poised to change the face of wearable electronics.
Imagine keeping your smartphone charged, or tracking your fitness and activity levels, just by
wearing a certain textile — and without having to carry along a charger cord.
Imagine a future when all your energy needs are created by the solar fabric clothing you wear -the
textiles you use on a day to day basis.
Solar cell fabric is a fabric with embedded photovoltaic (PV) cells which generate electricity when
exposed to light.
Traditional silicon based solar cells are expensive to manufacture, rigid and fragile. Although less
efficient, thin-film cells and organic polymer based cells can be produced quickly and cheaply.
They are also flexible and can be stitched onto fabric.
According to an article from New Scientist researchers have built a PV cell in the layers around a
fiber, creating a tiny cylindrical cell. No longer limited to rooftops and poles, solar collection could
work silently and unobtrusively from everyday objects.
A 30-year-old Spanish engineer has developed a way to integrate solar cells into textiles, paving
the way for cheap energy generation through flexible materials such as awnings or parasols.
Ana Rodes, a native of Alcoy in the Valencia region, is head of the sustainability and circular
economy technical department at AITEX, a leading research group that works to incorporate
emerging technologies into the textile industry.
20. solar photovoltaic (PV) technology is evolving so fast that scientists in South Korea recently
created ultra-thin flexible solar cells, as thin as a human hair. Fabrics are no longer just a key player
in fashion. Just last year, The White House announced a new manufacturing innovation centre;
The Revolutionary Fibers and Textiles Institute for Manufacturing Innovation Hub. The aim being
to secure US leadership in revolutionary fibres and textile manufacturing. Properties being
researched varied greatly. From being lightweight and flame resistant, to extremely strong and
containing electronic sensors.
These developments could lead to future textiles playing a pivotal role in the protection of service
men and women, firefighters and the such. Imagine a wounded soldier wearing a uniform made
with fabric containing sensors, which detect if they need to be treated compression bandages. Or
technology that can steer parachute fabric by changing the permeability.
Floating Solar Panels-
Projects in 2007-2010
The Aichi project was the first solar project known to have ever been constructed on water. It was
realized by a group of researchers from the National Institute of Advanced Science and Technology
in Japan and financed by the Japanese Ministry for the Environment. The aim of this research was
to introduce the concept of floating PV systems as well as an analysis of the effect of module
temperature on the PV system performance. The Far Niente Wineries claimed to have the first
significant, grid-connected solar system installed on water. The installa-tion was managed by SPG
Solar. The so called Floatovoltaic system is made up of modular crystalline PV panels mounted
on pontoons in a pond . The floating structure has in-built walkways between each row of panels
to allow for ease of access for cleaning and maintenance of the panels.A second vineyard in
California, Gundlach Bundschu, also adopted the same approach as that constructed in Far Niente,
The installation was also managed by SPG Solar. The difference between the two systems was the
PV array size: the system installed in a pond at Far Niente exceeded the 175kWp while that at
Gundlach Bundschu was reasonably smaller at the only project known to be installed in 2010 was
that at a Winery in Suverto, Italy. The difference between this system and any of the systems
discussed so far is that it is installed with a tracking mechanism which rotates the array according
to the motion of the sun; also a reflector is installed in front of the panel to maximize on the amount
of solar radiation received. The safety and tracking feature were analysed by a research group at
Sciaena Industria Technologia (SCINTEC), while the design and construction was taken care of
21. by Terra Moretti Holdings. This concept is referred to as Floating Tracking Cooling Concentrating
Systems (FTCC). A major percentage of the structure is made out of metal struts that hold the
crystalline panels at an optimal angle of 40° and reflector in front while also tracking the suns
motion.
The same research group who investigated the tracking feature at Petra’s Winery above also
developed the following installation in a Lake in Pisa, Italy. This time, the panels were placed
horizontally with reflectors forming a V-shape on either edge to maximize the amount of in-
coming radiation. In turn, this implies higher working temperatures, however in this case, the
panels were in closer prox-imity to the water, and so the cooling effect was more effective than
the configuration of the Suvereto project above . Note that a tracking system was also employed
for this configuration. Results prove that this configuration yielded higher results to the Suvereto
project and so it makes it a fa-vored concept. In fact, it was reported that this configuration yielded
an increase of 60-70% in annual output compared to conventional land based PV system.
A new organization to enter this scene is Ciel et Terre whose first floating photovoltaic project
was to construct a floating PV system in a vacant and flooded quarry at Piolenc in France. Metal
struts hold the array together while also maintaining the modules at an angle, tilted to the sun.
Floats are placed and connected under each row of panels within the array to keep the system
afloat. The floats are specifically made from High density polyethylene (HDPE) for particular
resistance to UV and corrosion which in turn results in a more durable option compared to metal
structure. The next floating solar system seen in 2011 was installed at a water treatment plant in
New Jersey, USA. It was designed by ENERActive which features a unique mooring structure
which allows the array to rise and fall with the water level of the reservoir while still holding the
array securely. In fact, this was the most challenging part of this project. The last project presented
in 2011 is the first of a number of investments by the Korea Water Resources Corpo-ration (K-
Water), This 100 kWp solar system is situated in a South Korean dam called Hapcheon. The
materials chosen for this structure contain enhanced water and moisture resistance to reduce the
possibility of structure freezing and thus rupture. SCINTEC, together with Koinè Multimedia, is
again seen to help design another floating solar project also an FTCC, this time in Cheogju, South
Korea. This project, built by Techwin, was particularly challenging since the panels were to be
placed in water which is subject to freezing in the winter months . Special attention was given
while selecting each individual component to be able to withstand both the seasonal freezing and
thawing cycles. A research project was set up in Singapore and is located in Bishan Park. It was
developed by Phoenix Solar as a pilot project. This 5kWp system is mounted at an angle of 10°
where the modules are placed on linked UV-resistant floats. The structure is moored to the lake
bed from the 4 adjacent points. Another research project of 0.5 kWp was also set up in 2013 on a
small pond in Sudbury, Canada . The nature of its structure is different to the projects we have dis-
cussed so far since the solar cells are not mounted on a pon-toon or float but rather the cells
22. themselves are extended on the surface of the water. The idea behind this is to make use of
laminated thin film solar cells with air pockets enclosed within to allow for a flexible floating
concept directly on the water’s surface. The developers of this project, MIRARCO, claim that such
a system would not endure as much stresses given by waves, tideand high winds as is experienced
by the pontoon mounted systems.
Project in 2014 and onward-
Born in France, the Hydrelio system is an innovative system to realize water-based solar power
generation. High design technology made it possible to build water solar photovoltaic facilities
using anchors. Hydrelio is a float module system developed by Shell Tail to build water solar
photovoltaic (solar power). The basic module consists of two floats made of high density
polyethylene (HDPE). The main float can be fitted with solar panels with standard 60 cells installed
and the second float connects the floats and serves as a foothold for maintenance. Connect these
floats with a connecting pin system to form solar islands. Hydrelio system is a small and area that
enables the implementation of solar power generation projects without deforestation, soil
pollution, and water pollution by effectively utilizing irrigation ponds, reservoirs, and dams
scattered throughout Japan. It is a particularly innovative water-installed solar system that is
particularly suitable for. In addition, since the natural cooling effect is obtained for modules and
cables by installing on the water, it is expected to have higher power generation efficiency
compared to the ground installation type, realizing excellent cost effectiveness such as shortening
the construction period with a simple structure.RECisshowcasing its floating solar photovoltaic
(PV) installation at a government site in West Java for the first time in Indonesia . REC has
partnered PT Kas Green Energy, a local independent power producer (IPP), to introduce the
concept of a floating solar installation through a pilot project at Electricity & Renewable Energy
Museum (Museum Listrik dan Energi Baru – MLEB), Taman Mini Indonesia Indah. REC solar
PV panels are quickly installed on “Hydrelio” pon-toons which are 100% recyclable and are easy
to dismantle. Made of high density polyethylene (HDPE), they can be in-stalled safely on drinking
water reservoirs and are resistant to UV light.
Young-Kwan Choi et al has compared and analyzed the generation efficiency of floating and land
photovoltaic systems. Floating PV has shown greater generation efficiency by over 10% compared
with the general PV systems installed overland. This paper compares and analyzes the empirical
data of the floating PV system, which K-water has installed, with that of the existing overland PV
and has verified that the generating efficiency of floating PV system is superior by 11% and more
. Jinyoung Song and Yosoon have analyzed the potential of floating PV systems on a mine pit lake
in Korea to break this misconception . According to this analysis, however creating a pit lake in
an open-pit mine and using it for a large-scale floating PV system is economically beneficial and
could significantly reduce greenhouse gas emissions . Considering the environmental and
23. economic gains from greenhouse gas reduction and electricity sales, a floating PV system on a pit
lake of an abandoned mine site is considered an efficient reuse option for abandoned mines.
Solar Roadways-
The company was founded in 2006 by Scott and Julie Brusaw, with Scott as President and CEO.
They envisioned replacing asphalt surfaces with structurally engineered solar panels capable of
withstanding vehicular traffic. The proposed system would require the development of strong,
transparent, and self-cleaning glass with the necessary traction and impact-resistance properties at
competitive cost.
In 2009, Solar Roadways received a $100,000 Small Business Innovation Research (SBIR) grant
from the United States Department of Transportation (USDOT) for Phase I to determine the
feasibility of the proposed project. In 2011, Solar Roadways received a $750,000 SBIR grant from
the DOT for Phase II to develop and build a solar parking lot; from this, they built a 12-by-36-foot
(3.7 by 11.0 m) parking lot covered with hexagonal glass-covered solar panels sitting on top of a
concrete base, heated to prevent snow and ice accumulation, with LEDs to illuminate road lines
and display messages. According to the Brusaws, the panels can sustain a 250,000 lb (110,000 kg)
load.
In April 2014, the company started a crowdfunding drive at Indiegogo to raise money so they could
get the product into production. The campaign raised 2.2 million dollars and became Indiegogo’s
most popular campaign ever in terms of the number of backers it attracted. The success was
attributed in part to a tweet made by actor George Takei, due to his more than 8 million followers.
One of the Brusaws’ videos went viral, with over 20 million views as of November 2015. In
December 2015, the USDOT announced that it had awarded Solar Roadways a Phase IIB SBIR
contract to further their research. In 2016 they were given an additional $750,000.
The first public installation was in Jeff Jones Town Square in Sandpoint, Idaho. It opened to the
public on September 30, 2016, as a pilot installation for a pedestrian walkway. This installation
consists of 30 Solar Roadways SR3 panels, covering an area of roughly 150 square feet (14 m2
).
The cost of this installation was roughly $60,000, with the majority of the money coming from a
grant from the Idaho Department of Commerce ($47,134), and a $10,000 grant from the Sandpoint
Urban Renewal Agency.
24. A webcam was installed to broadcast a view of the installation. The 30 tiles in Sandpoint generated
power which was fed into the electricity meter at Jeff Jones Town Square, averaging around ¼
kWh per day during their most productive month, August 2018. For comparison, a typical home
solar panel produces 1.45 kWh per typical day.In December 2018, Solar Roadways shut down the
SR3 pilot installation in Sandpoint after some problems started to emerge. LEDs in certain colors
started to fade unexpectedly, and snow caused problems for the heating elements because of the
metal strips which cover the gap between the panels. Scott Brusaw said Solar Roadways would
install their newest SR4 prototype in 2019 at no cost to the city. SR4 is due to have rubber strips
to mitigate problems with heat distribution.
In June 2019, Solar Roadways announced a second pilot installation in Baltimore, Maryland. It
will be a 36-panel display of the new SR4 model installed at the Inner Harbor tourist destination.
The company has also made a deal with a manufacturer to increase production which was limited
to three panels per day. In 2014, Jonathan Levine, a professor of urban planning at the University
of Michigan, expressed doubt regarding the political feasibility of the project on a national scale.
He suggested, however, that a single town might be able to deploy the concept in a limited test
case such as a parking lot.
Journalist David Biello, writing in Scientific American, noted the difficulties of the project in
dealing with material limitations, particularly in its choice of making the surface of the panels from
glass, which "must be tempered, self-cleaning, and capable of transmitting light to the PV below
under trying conditions, among other characteristics—a type of glass that does not yet exist."
Sebastian Anthony noted in ExtremeTech that the cost to replace all roads in the United States
with Solar Roadways panels would come to approximately $56 trillion, based on Scott Brusaw's
cost estimate of $10,000 for a 12-by-12-foot (3.7 m × 3.7 m) section. The USDOT announcement
of Phase IIB funding in December 2015 mentioned that because the solar cells were still
manufactured by hand, they were "very costly to produce".
Phil Mason, a British chemist who runs a YouTube vlog, made a similar argument about cost,
adding his doubts about traction on a glass surface. Solar Roadways conducted its own lab tests
using a British Pendulum Skid Resistance Tester and claimed the results suggested that the texture
was "sufficient to stop a vehicle going 80 mph (130 km/h) on a wet surface in the required
distance". US Department of Transportation engineer Eric Weaver commented on those tests,
saying, "We can’t say that it would be safe for roadway vehicular traffic. Further field-traffic
evaluation is needed to determine safety and durability performance."
25. Phase I Research
August, 2009 Solar Roadways Incorporated is awarded a Phase I SBIR (Small Business
Innovative Research) contract by the U.S. Department of Transportation. The 6-month $100,000
Phase I contract is for “a detailed concept that demonstrates the viability of creating a prototype
that satisfies the attributes described below:
1. It generates its own power; either through the energy of the sun or perhaps the energy of
the moving vehicle mass traveling over the pavement.
2. It is intelligent enough to transfer the power generated to where it is most needed or to a
temporary storage apparatus.
3. It is made of recycled or other sustainable materials.
4. It can be modular for ease of replacing worn or damaged sections.
5. It is durable enough to withstand repeated loading from heavy traffic at or above the level
of current pavement systems
6. It meets or exceeds safety characteristics of existing pavement systems.
7. It mitigates water runoff through either permeability or designed retention and filtration.
8. It is at a cost that allows it to be financially self-sustaining; meaning that the benefits of
power generation and water runoff mitigation over the design life outweigh its initial cost.
Glass
To make a solar panel that could withstand the abuse of fully-loaded semi-trucks, a protective case
had to be created to protect the sensitive solar cells and electronics inside. In addition, the surface
of this case had to be transparent to allow the sunlight to reach the solar cells inside.
Deciding what to make this protective case out of was a materials engineering problem. Scott
Brusaw is an electrical engineer (BEE, MSEE), so he looked up the top materials research labs in
the nation. Penn State’s Materials Research Institute and the University of Dayton’s Research
Institute were at the top of the list. Scott traveled to both universities and met with their materials
research professors. Both research labs, without hesitation, suggested the use of glass for the
surface. Unlike plastic, the optical properties of glass are stable against solarization (long-term
darkening) and other UV induced mechanisms of material degradation. Float glass was
recommended due to its widespread commercial availability and relatively low cost. Float glass
comes in different forms. The greenish glass shown above is called soda lime glass and is the most
common type. Windows and bottles are typically made of soda lime glass. The green tint is caused
by the iron content of the glass. This same iron content negatively affects the transmittance (ability
to pass sunlight) of the glass, so a low-iron glass was selected. Due to the very limited budget of
the Phase I prototype, glass was only studied, but not yet used during this round of funding. The
findings were applied in Phase II.
26. Stormwater
Stormwater is just rain or melting snow that makes its way from our roads to our waterways.
Imagine a heavy downpour: the stormwater flows across lawns/fields and picks up fertilizer,
pesticides, etc. It then flows into the street, where it picks up vehicle droppings such as oil,
antifreeze, etc. Currently, this toxic cocktail finds its way into our streams, rivers, lakes, and
oceans. Some studies show that over 50-percent of water pollution is caused by stormwater.
Capturing and filtering the stormwater before it reaches the waterways could solve the problem.
A physicist/hydrologist who visited us once shared that, if we could move water just 200 miles in
this country, we could eliminate drought conditions.
By lining the sides of our roadways with stormwater retention systems, we could do the initial
filtering. By including pumps, the stormwater could then be moved to areas for additional filtering
and then to aquafers or agricultural centers. In colder climates, the stormwater could be stored
below the frost line to prevent freezing.
Electronics, firmware, and software
The SR1 was designed around a 32×32 array of LED cells. Each cell contains 3 white and 3 yellow
LEDs to simulate any road line paint configuration. This required 64 circuit boards to create the
12-foot by 12-foot SR1. 12-feet is the largest standard U.S. lane width. Another circuit board was
needed for the microprocessor control unit. Scott Brusaw designed the two circuit boards required.
68 of the LED circuit boards were assembled and tested: 64 for the SR1 and another four for a
prototype crosswalk panel. Three microprocessor boards were assembled and tested. These were
the control/communications boards for the stormwater control system, the Solar Road Panel, and
the Sidewalk Panel. An XBee RF module was added to the microprocessor board to incorporate
wireless communication.
Solar Car-
The first model solar car invented was a tiny 15-inch vehicle created by General Motors employee,
William G. Cobb. Designated the Sunmobile, he displayed it in 1955 at the Chicago, Powerama
convention. It was made up of 12 selenium photovoltaic cells and a small electric motor.
The solar array consists of hundreds of solar cells converting sunlight into electricity. In order to
construct an array, PV cells are placed together to form modules which are placed together to form
an array. The larger arrays in use can produce over 2 kilowatts (2.6 hp).
27. Solar arrays
The solar array can be mounted in six ways:
• horizontal. This most common arrangement gives most overall power during most of the
day in low latitudes or higher latitude summers and offers little interaction with the wind.
Horizontal arrays can be integrated or be in the form of a free canopy.
• vertical. This arrangement is sometimes found in free standing or integrated sails to
harness wind energy.[4]
Useful solar power is limited to mornings, evenings, or winters and
when the vehicle is pointing in the right direction.
• adjustable. Free solar arrays can often be tilted around the axis of travel in order to increase
power when the sun is low and well to the side. An alternative is to tilt the whole vehicle
when parked. Two-axis adjustment is only found on marine vehicles, where the
aerodynamic resistance is of less importance than with road vehicles.
• integrated. Some vehicles cover every available surface with solar cells. Some of the cells
will be at an optimal angle whereas others will be shaded.
• trailer. Solar trailers are especially useful for retrofitting existing vehicles with little
stability, e.g. bicycles. Some trailers also include the batteries and others also the drive
motor.
• remote. By mounting the solar array at a stationary location instead of the vehicle, power
can be maximised and resistance minimized. The virtual grid-connection however involves
more electrical losses than with true solar vehicles and the battery must be larger.
The choice of solar array geometry involves an optimization between power output, aerodynamic
resistance and vehicle mass, as well as practical considerations. For example, a free horizontal
canopy gives 2-3 times the surface area of a vehicle with integrated cells but offers better cooling
of the cells and shading of the riders. There are also thin flexible solar arrays in development.
Solar arrays on solar cars are mounted and encapsulated very differently from stationary solar
arrays. Solar arrays on solar cars are usually mounted using industrial grade double-sided adhesive
tape right onto the car's body. The arrays are encapsulated using thin layers of Tedlar.
Some solar cars use gallium arsenide solar cells, with efficiencies around thirty percent. Other
solar cars use silicon solar cells, with efficiencies around twenty percent.
28. 7 Future scope-
Reducing carbon dioxide (CO2) emissions is at the heart of the world’s accelerating shift from
climate-damaging fossil fuels towards clean, renewable forms of energy. The steady rise of solar
photovoltaic (PV) power generation forms a vital part of this global energy transformation.
In addition to fulfilling the Paris Agreement, renewables are crucial to reduce air pollution,
improve health and well-being, and provide affordable energy access worldwide. This paper from
the International Renewable Energy Agency (IRENA) presents options to speed up deployment
and fully unlock the world’s vast solar PV potential over the period until 2050.
The analysis follows the REmap Case outlined in IRENA’s Global Energy Transformation
roadmap, which highlights ways to step up the energy transformation over the next three decades
in contrast to current plans.
Specifically, the paper highlights the growth needed in solar PV to achieve climate goals. It also
offers insights on cost reduction, technology trends and the need to prepare electricity grids for
rising shares of solar PV.
Among the findings:
• Accelerated solar PV deployment coupled with deep electrification could deliver 21% of
the CO₂ emission reductions (nearly 4.9 gigatonnes annually) by 2050.
• Solar PV could cover a quarter of global electricity needs by mid-century, becoming the
second largest generation source after wind.
• Global capacity must reach 18 times current levels, or more than 8 000 gigawatts by 2050.
• Asia would continue to dominate solar PV use, with over 50% of installed capacity,
followed by North America (20%) and Europe (10%).
• Solar PV project costs, already below marginal fossil-fuel costs in global terms, are set to
decline further in the decades ahead.
29. • Mobilizing finance will be key, with IRENA’s roadmap estimates implying a 68% increase
in average annual solar PV investment until 2050.
• Solar PV is a fast-evolving industry, with innovations along the entire value chain driving
further, rapid cost reductions. Floating PV is a prime example, with global cumulative
installed capacity exceeding one gigawatt in 2018 and clear potential for rapid growth
• Rooftop solar PV systems have spread rapidly thanks to supporting policies, such as net
metering and fiscal incentives.
• Energy transformation brings socio-economic benefits. The global solar industry could
employ over 18 million people by 2050.
Modern day solar panels have a maximum efficiency of about 33%, meaning that much of the
sun’s solar radiation goes to waste even under the most ideal circumstances. This is a major
obstacle that solar energy systems must overcome to achieve exponential growth in the energy
industry.Because of this inefficiency, the solar industry is investing heavily in finding new ways
of improving the efficiency of solar energy systems, with 3 of the biggest developments being in
solar energy storage, perovskites, and multi-junction cells.
A major obstacle to solar energy production comes in the form of solar energy storage.Solar energy
storage is crucial to the success of future energy systems because, without it, any excess electricity
that is generated throughout the day cannot be utilized at a later time when sunlight isn’t as
plentiful (like at night).Energy storage allows solar energy plants to store excess energy so that it
can be sold and used at a later time for a variety of reasons, including load leveling, emergency
preparedness, and grid stabilization.While these solar battery storage systems seem like a no-
brainer, there is still much work to be done in bringing down the costs of these systems as they
primarily consist of expensive lithium-ion batteries. As costs go down and efficiency goes up, we
should start to see battery storage installations become more commonplace in the future.
If you were asked to describe the location of a typical solar installation, you would probably
describe a rooftop of some sort, or maybe a cornfield in the Midwest that has been converted into
a modern-day solar farm. What probably doesn’t come to mind is a whole bunch of panels floating
in the ocean; however, in China, that’s exactly what’s happening. In June of 2017, China flipped
the switch on the world’s largest floating solar farm, capable of producing 40 megawatts of power
and powering up to 15,000 homes. While it seems like an odd idea, building a solar farm in this
manner allows the panels to be cooled by the ocean water, while at the same time, protecting
existing land-based agricultural and terrestrial ecosystems from re-development.This sort of solar
installation would be especially beneficial for smaller nations that lack adequate land for the large,
utility-scale solar farms, as they could now turn to the open ocean for their energy production
needs
30. 8Conclusion-
Solar cells are very clean way to produce electricity, with no greenhouse gas effect over their
lifetime. Solar power is an immense source of directly useable energy and ultimately creates
other energy resources: biomass, wind, hydropower and wave energy.
Most of the Earth's surface receives sufficient solar energy to permit low-grade heating of water
and buildings, although there are large variations with latitude and season. At low latitudes,
simple mirror devices can concentrate solar energy sufficiently for cooking and even for driving
steam turbines.
The energy of light shifts electrons in some semiconducting materials. This photovoltaic effect is
capable of large-scale electricity generation. However, the present low efficiency of solar PV
cells demands very large areas to supply electricity demands.
Direct use of solar energy is the only renewable means capable of ultimately supplanting current
global energy supply from non-renewable sources, but at the expense of a land area of at least
half a million km2
.
Solar energy is not only environmentally sound but they also result in comprehensive economic
and social gains. An important benefit of solar energy is the secure and independent energy supply
in rural and remote areas that can advance the development process more rapidly at lower cost
than comparable efforts based on non-renewable conventional energy sources. Of equal
importance are the benefits that solar energy use allows rapid improvement in life standards.
In conclusion, the opportunities for using the solar energy in Mongolian Ger of nomadic families
are considerable. Taking advantages of the existing elements of Ger it is possible to design solar
system suitable in nomadic life-style. It will not only facilitate the energy system of the country
supplying the rural population with energy but also result in improvement of life standards.
Furthermore, it also makes it possible to use small devices such as portable computer to connect
to the internet services by satellite transmission so that the people in the immense grasslands could
make shorter the distance with the civilization and communicate with the world.
31. References-
➢ Reference Books
Bourgin, Yohann (October 25, 2016). "High Tech. Ségolène Royal lance la première route solaire
dans l'Orne". Sud-Ouest. Retrieved November 2, 2016.
Hammarstrom L. and Hammes-Schiffer S. Artificial Photosynthesis and Solar Fuels. Accounts of
Chemical Research 2009; 42 (12): 1859–60.
Apte, J.; et al. "Future Advanced Windows for Zero-Energy Homes" (PDF). American Society of
Heating, Refrigerating and Air-Conditioning Engineers. Archived from the original (PDF) on 10
April 2008. Retrieved 9 April 2008.