The document describes a smart guard lamp system that combines solar LED street lights with IP cameras and wireless connectivity. Key features include: 1) The system uses solar panels and lithium ion batteries to power LED lamps, IP cameras, wireless modules and a controller independently without needing electricity. 2) The modular design allows flexible configurations and integration of distribution, lighting, security and wireless networking functions within a single unit. 3) The wireless network enables real-time monitoring and control of the lamps and cameras from a remote control center using smartphones or the internet.

1. Smart Guard Lamp System
(Solar LED Street Lights)

2. 1. 0verviw
2. Smart Guard Lamp Benefit
3. Battery Pack Spec.
4. MPPT Solar Charge Controller Spec.
5. WiFi Spec.
6. IP Camera Spec.
7. LED LAMP Spec.
8. Solar Power LED Street Lights
9. Total SGL System Specification
10. Basic Configuration
11. Remote Controller System
12.WiFi Independent Power References
Contents

3. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
3
The Features of Smart Guard Lamp System
- Only Lamp Site.
- Site Lamp combines the control server, cameras and communications capabilities
- LED Lamp is Low-power, high-performance ,50Watt
- Basic Standard : Wireless LAN IEEE802.11ac Gigabit WiFi (5.8GHz)
- Network Configuration is simple to use the function of the Wireless Multi-Bridge.
- the power source of LED Lamp and Other Parts is solar plates
- The Battery Pack is manufactured by lithium ion battery of Samsung SDI
Wireless Wireless
TOC
CCTV control Center
Wireless Wireless
Wireless Wireless
1.High quality CCTV security system for broadcasting &
security implementation using renewables.
2. Implementing a wide range of services such as
location-based services, Free WiFi service etc using
the self network of the wireless with high-bandwidth
3.Integrated Control Center Building
1. Overview
CCTV network Route 1
CCTV network Route 2
CCTV network Route 3

4. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
4
2. Smart Guard Lamp Benefit
Stand-alone
• OFF- Grid
• Photovoltaic Generation & Charging Battery
• Lithium Battery System
• the power of the LED lamp, CCTV, Communication Module,
Controller are supplied by Battery fully.
• Easy to install new or previously
Control functions
Modular Systems Fixed Cost savings
• Applications can be built by usage with the Modular System
• Integrated distribution panel, Controller & Battery adopted
• LED Lamp, CCTV & Wireless Network System All IN ONE
built
• No Electrical Fee (by PV)
• NO Communication Fee ( by WIFI
Network)
• No electric Construction cost ( OFF Grid )
• Low maintenance costs
• Real-time monitoring using a wireless network
due to the a video and audio transmitted
• Crime and disaster prevention to ensure citizen safety with no dead
zone control
• Real-time control and control using a Smartphone
• Control Center has a DATA collection and
archiving, tracking capabilities

5. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
5
(Order Numbering)
Terminal
Type
I
Y
Cable Length
(Unit : mm)
100⇒0100
~
1100 ⇒1100
Case
Type
A
B
C
Capacity
31.2Ah⇒30
~ 104Ah⇒100
Voltage
11.1V⇒11
14.8V⇒14
22.2V⇒22
25.9V⇒24
SP – 26F – – ––
SP12,24V SERIES
Lithium Battery Pack
SP11, 14, 18, 22, 24 Lithium Battery Pack is based on the Lithium
ion Battery of Samsung SDI.
Excellent Safety , High energy density, Long Lifetime.
Features
■ Excellent Safety & Cycle Life.
■ Auto Protection & Cell Balancing.
■ Easy Scalability of Capacity with Parallel Operation
■ CE Certification
Application
■ Solar Street Lighting(can be installed in pole size: 168~218Ø)
■ Energy Storage System for PV System, Wind Power System
■ Back Up System for BTS, UPS, ATM, Communication
■ Battery Operated Machinery & Equipment
3. Lib Battery Pack Spec.

6. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
6
4. MPPT Solar Charge Controller Main Spec.
SNS-PV-CT-001
System Controller / PV Charger
SNS-PV-CT-001 is applied to the associated charger and its MPPT technique to charge the secondary battery by connecting the solar
cells is composed of a controller controlling the entire system, capable of communicating.
The system controller can be divided into a power supply, a wire / wireless communication unit, the sensing unit and light control.
Solar charger has the MPPT (Maximum Power Point Tracking) by applying a technique common PWM (Pulse With Modulation)
characteristics that can be compared to the energy efficient operation of the charger 30 to 60%.
Input and output devices include a power port that can be connected to the associated terminal and the load that can be connected to a
secondary battery and a charging terminal for connecting the solar cell
and has a built-in RS-232 communication port for connection to the system can communicate with the outside.
System Controller Features MPPT Charger Features
• Operation Voltage : 24V, 12V(Optional)
• Wired Communication : RS-232 4 Port, USB
4 Port Ethernet2 Port (PoE Support)
• Wireless Communication : IEEE802.11a/n(5.8GHz)
IEEE802.11b/g/n(2.4GHz-Optional)
• Sensor : Battery voltage, and various internal generated voltage detection to
diagnosis, over-current protection, operating temperature sensing
• Lighting control : linear Control Type
Buck-Booster Type
• Up to 99% efficiency with MPPT charging mode
• DC12V / 24V / 48V battery automatic recognition,
• Max PV solar Voltage DC100V.
• High speed (MPPT), CV & Floating Charging
• ON MODE, OFF MODE & PV Voltage Control MODE Discharging
• Battery Type selecting - SLA, Vented, Gel, NiCd.
• Other types can be any operation specified
• RS232 port provides various check functions
• Parallel drive is possible for increased electrical capacity.System Configuration Architecture
MPPT
Charger
PV
Panel
Battery
PACK
Controller
RS-232
WiFi
Antenna
DC24V
DC12V
Optional
WAN
Local
Monitor
RS-232
Remote
Monitor
Ethern
et
Ethernet
LOAD
LED-Lamp WiFi

7. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
7
SNS-Wi-58-001 uses the 5.8GHz frequency band as the outdoor type wireless LAN device, and supports
IEEE802.11a / n standards
Employing a high-performance 2T2R MIMO antenna for long-distance communication is available, and
speeds up to 300 Mbps.
AP, Station, WDS AP, WDS Station, and support the Multi-AP / Station features such as to provide a
waterproof / dustproof level of IP-66, Using UV ABS prevents the appearance is beautiful, and the installation
easier by adopting the IEEE802.3af PoE function,and
DC12V low power driven of 0.5A is possible.
5. WiFi Spec.
SNS-Wi-58-001
WiFi IEEE802.11a/n 5.8GHz
Features
Application
• High performance 802.11a/n 5.8GHz Band
• 2T2R 2×2 MIMO chip
• Max transmission range: 15Km, and max transmission throughput: 300Mbps
• Integrated XTrans technology
• Multi-hop technology support several devices to form a relay link, adapt to complicated terrestrial environment
• Support 4 operation mode: AP, Station, AP-WDS, Statin-WDS
• Support point-to-point, point-to-multipoint connection
• Unique RF and andesign enables long-range transmission
• Wireless multimedia optimization technology guarantees video/audio transmission QoS
• Web based working scenario selection makes the installation and setting much easier
WAN
AP MODE
WAN
AP
WDS Repeater MODE
WDS
WDS

8. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
8
• 1/2.5’’ 5.0 Megapixel CMOS Image sensor
• H.264 Main Profile @ level 3.0 coding, Real time H.264 dual-stream encoding, resolution, frame rate bit rate adjustable
• Support Color/BW mode converting, IR-CUT Filter
• Built-in Motion Detection, support alarm linkage, Supports alarm input and output
• Support bi-directional real time audio transmission
• auto-retrieve function and auto-connection network
• Support Plug-and-Play, including PC surveillance platform and mobile client, Easy to remote
• Integrated ONVIF standard, Compatibility with third-party ONVIF platform software
• IP66 Rated Waterproof, Outdoor use
• Offer open SDK
6. IP Camera Spec
SNS-CA-HD-001
HD IP Camera
Features
Dimensional Outlines
IDCA-HD-001 can provide a Full-DH-quality video is available as a WEB-based management is possible to
install IP cameras in outdoor.
1 / 2.5 with built-in '' CMOS Image Sensor was based on the advanced picture quality, the H.264 Dual Stream
has been adopted.
This adjusts the black-and-white and color images randomly available and provides Motion-Detect function and
can cause an alarm, two-way voice communication (Option) is designed as a possible structure In addition, it
follows the ONVIF standard Third-Party ONVIF Platform software and is also compatible.
The waterproof / dustproof degree of IP66, can also provide SDK for developers, Employing a waterproof RJ45 Connector to have the ease of
installation, low power operation of the 12 VDC 0.3A is possible

9. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
9
Item Unit Model
Power Consumption w 30 40 50 60
SMPS Efficiency % 90 90 90 60
LED Spec XPE XPE XTE XTE
Power Factor >0.95
Input Voltage v 90~240
Total Luminance Flux lm 2,722 3,557 5,202 5,818
Luminance Efficiency lm/w 90.7 88.9 104.0 97
Color Temperature K 5500~6500 5500~6500 5500~6500 5500~6500
Radiation Angle Deg. 135*75
Color Rendering Index Ra >75
Dimension mm 547.5*223.5*158.5
Life Span hrs 50,000
Desc Unit Model
Power Consumption w 70 80 100 120 150
SMPS Efficiency % 90 90 90 90 90
LED Spec XTE XTE XTE XTE XPG2
Power Factor >0.95
Input Voltage v 90~240
Total Luminance Flux lm 7,881 8,452 10,088 11,349 13,844
Luminance Efficiency lm/w 112.6 105.6 100.8 94.6 92.3
Color Temperature K 5500~6500 5500~6500 5500~6500 5500~6500 5500~6500
Radiation Angle Deg. 135*75
Color Rendering Index Ra >75
Dimension mm 610*300*168.3
Life Span hrs 50,000
7. LED LAMP Spec

10. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
10
• By using LED as a light source with low carbon generation and Use non-toxicmaterials eco-friendly products.
• Waterproof Dustproof Class IP66 is satisfied
• LED module Protection circuit apply
• Shield against sun lights
• Contamination/corrosion/oxidation/crack/shock/impact-resistant)
• Small size and light weight PC,V0, UV)
• Mechanically better than AL die casting
• UV protection (UV PC Resin)
• Wireless Communication Modules embedded inside of the housing
• Waterproof Junction Box embedded inside of the housing
Product Name ALGLED-SL-080
Color Temperature 2600~6500K±500(Customers can Choose)
Dimensions(L x w x H) 610*300*168.3
Input Power 90 ~ 277V
Driving Voltage 45 ~ 55V
Power Consumption 80W ± 10%
Control Method Constant current control
LED Q’ty(EA) 48
Light Flux(lm) 9928
Efficiency(lm/W) 124
CRI >75Ra
Lifetime(Hr) 50,000
Operating Temp -20 ~ 50℃
Storage Temp -30 ~ 80℃
IP Class IP66
Casing Polycarbonate
Weight(Kg) 3.9Kg(SMPS Not Included)
7. LED LAMP Spec
1. Product Specifications(Specifications and Characteristics)
Features
Product Spec
(Mass productions some parts quantities and specifications subject to change.)

11. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
11
Characteristics Unit Min Typical Max
Thermal resistance, junction to solder point °C/W 5
Viewing angle (FWHM) – white Degree 115
Viewing angle (FWHM) – royal blue degree 140
Temperature coefficient of voltage mV/°C -2.5
ESD withstand voltage (HBM per Mil-Std-883D) V 8000
DC forward current mA 1500
Reverse voltage V 5
Forward voltage (@ 350mA, 85°C) V 2.85 3.4
LED Junction temperature °C 150
7. LED LAMP Spec
• Available in white, 80-CRI min white, 70-CRI min white and royal blue
• Warm white available in 85- and 90-CRI min.
• New: available in 2200 K CCT
• Binned at 85 °C
• Cool white efficacy of up to 148 lm/W (@ 85 °C, 350 mA)
• Royal Blue wall plug efficiency of up to 53% (@ 85 °C, 350 mA)
• Wide viewing angle: 115-140°
• Thermal resistance: 5 °C/W
• Electrically neutral thermal path
• Vf binning supported for XT-E White and Royal Blue
• XT-E Royal Blue sorted into 2.5-nm wavelength bins
• Unlimited floor life at ≤ 30 ºC/85% RH
• Reflow solderable – JEDEC J-STD-020C compatible
• RoHS- and REACh-compliant
• UL-recognized component(E349212)
2. LED Spec. (Cree XLamp XT-E LEDs)
Feature
Characteristics

12. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
12
Characteristics Unit Min Typical Max
Thermal resistance, junction to solder point °C/W 4
Viewing angle (FWHM) – white Degree 115
Temperature coefficient of voltage mV/°C -1.9
ESD withstand voltage (HBM per Mil-Std-883D) V 8000
DC forward current mA 1500
Reverse voltage V 5
Forward voltage (@ 350mA, 85°C) V 2.8 3.15
Forward voltage (@ 700mA, 85°C) V 2.9
Forward voltage (@ 1000mA, 85°C) V 3.0
Forward voltage (@ 1500mA, 85°C) V 3.1
LED Junction temperature °C 150
7. LED LAMP Spec
• Available in white, outdoor white and 80-,85- and 90-CRI white
• ANSI-compatible chromaticity bins.
• Binned at 85 °C
• Maximum drive current : 1500mA
• Wide viewing angle: 115°
• Low Thermal resistance: 4 °C/W
• Electrically neutral thermal path
• Unlimited floor life at ≤ 30 ºC/85% RH
• Reflow solderable – JEDEC J-STD-020C compatible
• RoHS- and REACh-compliant
• UL-recognized component(E349212)
3. LED Spec.(Cree XLamp XP-G2 LEDs)
Feature
Characteristics

13. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
13
8 . Solar LED Street Lighting(8M) Structure

14. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
14
8 . Solar LED Street Lighting(10M) Structure

15. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
15
MPPT
Solar
Charger
Management
Controller
PV
Panel
Lithium
Battery
Bank
50-200Watt
LED Smart
Guard Lamp
Power Supply
Power Supply
CommunicationCommunication
HD IP
Camera
Communication
Module
9. SGL System Total Configuration

16. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
16
MPPT
Solar
Charger
Management
Controller
PV
Panel
Lithium
Battery
Bank
50-200Watt
LED Smart
Guard Lamp
Web CAM in Pole
Communication
10. SGL System Basic Configuration

17. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
17
11. Remote Controller System
Search
Solar Street Lights registration

18. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
18
11. Remote Controller System
SOC of the Lithium Battery
LED Sataus

19. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
19
11. Remote Controller System
PV voltage, temperature, charge current
The whole system current consumption

20. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
20
① Remote controller position
② Remote controller IP address
③ Remote controller Port
④ Lamp Status (ON/OFF)
⑤ Lamp Current
⑥ Input Voltage
⑦ PV solar Voltage
⑧ Charging Current
① ② ③ ④ ⑤ ⑥ ⑦ ⑨ ⑩ ⑪ ⑫ ⑬⑧
⑨ roller Temperature
⑩ Door Status (Open/Close) Event
warning
⑪ Battery SOC Status
⑫ Charging times
⑬ Alarm (Door Close/Open)
Color Display
11. Remote Controller System
SGL System Status and Status Open Closed Doors

21. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
21
Internet
Video monitoring
( PC sever)
Remote Monitoring
Korea Reference
12. WiFi Independent Power References(I)

22. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
22
[Suwon City, Korea]
#site 2
#site 1
12. WiFi Independent Power References(I)

23. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
23
Wire
Wireless
1km
WEB
CCTV
Hub NVR
Monitering
CCTV
CCTVCCTV
12. WiFi Independent Power References(I)

24. Copyright ⓒ 2015 Daemoon information Co., Ltd. All rights Reserved
24
Solar Powered LED Street Lights
Model LED Lamp
PV Module
260W
Solar Charger
MPPT Control
Battery
Controller
container
Pole
(STS 304)
Non Sunny
Days
Total
A-Type LiFePO4
(8M, 24V75AH,80W)
298.0 260.0 450.0 1,063.2 250.0 840.0
3.5
3,161.2
A-Type Li-ion
(8M, 24V96AH,80W)
298.0 260.0 450.0 1,047.7 250.0 840.0
3
3,145.7
B-Type LiFePO4
(10M,24V100AH,100W)
370.0 260.0 450.0 1,390.1 250.0 890.0
3.5
3,610.1
A-Type Li-ion
(10M, 24V135AH,100W)
370.0 260.0 450.0 1,458.0 250.0 890.0
3
3,678.0
Solar Powered LED Street Lights (TABOS)
Model LED Lamp
PV Module
260W
Solar Charger
MPPT Control
Battery
LiFePO4
Controller
container
Pole
(STS 304)
Non Sunny
Days
Total
A-Type Li-ion
(8M, 24V96AH,80W)
298.0 260.0 140.0 1,037.0 250.0 840.0
3
2,825.0
A-Type Li-ion
(10M, 24V135AH,100W)
370.0 260.0 250.0 1,458.0 250.0 890.0
3
3,478.0
.
Solar Powered LED Street Lights (Star net Optional)
Model LED Lamp
PV Module
260W
Solar Charger
MPPT Control
Wireless
Module
IP CAM
Battery
LiFePO4 (24V75
AH)
Controller
container
Pole
(STS 304)
Non Sunny
Days
Total
A-Type LiFePO4
(8M, 24V75AH,80W)
298.0 260.0 500.0 600.0 250.0 1,063.2 250.0 840.0 3.5 4,061.20
B-Type LiFePO4
(10M,24V100AH,100W)
370.0 260.0 450.0 600.0 250.0 1,390.1 250.0 890.0 3.5 4,460.08
12. WiFi Independent Power References(I)

25. Thank you!