3RU AOS03 Catv optical transmission platform

Product Datasheet
AOS03III Series

AOS03III optical transmission platform chassis

Introduction
AOS03III platform chassis is standard 19-inch rack-mounting
with 3U high. The chassis provides 13 module slots for two power
supply modules, one control and network management module
and ten application modules. A variety of application modules are
available for flexible configuration. The modular design supports
modules plug-and-play and blind-plug. Application modules can
be installed to any universal slots (10) and automatically
identified by a control module.

The chassis adopts passive rear panel design, blindmate RF connector, which avoids cumbersome maintenance
procedures of power-off, disconnecting and reconnecting cables and other operations. The chassis supports
single power supply module and dual power supply for hot back-up. Unique low-consumption technology helps
achieve a total consumption of no more than 360W of a full loaded chassis. Moreover, the forced
convection cooling system features monitoring status of each fan. It eases replacement work and
ensures long-time stable operation.

Each module can be monitored by a control module or a network management module with a large TFT
LCD display or on a remote monitor through standard SNMP network management system. CAN technology
supports stacking of multiple chassis, as a SNMP network management agent. The Operator can use a network
management module to manage all chassis. This helps save IP address resources and the network management
investment. Operating parameters of each module are backed up in the control module. The operator can reset
them or restore them to replacement applications modules, which is very convenient for platform configuration.
All modules support software online upgrades. Operations can be done on local control panel as well as
our SNMP-compliant network management software-SysManager.

Features
u 3U rack-mounting chassis with 2 slots for power supply modules, 1 slot for network management
control module and 10 universal slots for application modules.
u Passive structure, solid and safe.
u Hot-swapping and blindmate plug-in modules for easy configuration.
u Low consumption design and forced cooling system reduce heating and increase reliability.
u Single power supply or dual power supply for hot back-up.
u Intelligent module and system design monitoring working parameters of all modules.
Copyright©2011 Guangdong Donyan Network Technologies Co., Ltd.

Product Datasheet
AOS03III Series
u Big TFT screen with user-friendly interface.
u Optional SNMP compliable network management system.
u Multi-chassis stacking as a network management agent; and each module supports remote online
upgrade.
u Parameters of each application module can be stored, reset and copied.

AOS03III modules
u AOS03III-C Control Module
u AOS03III-CM Network Management Control Module
u AOS03III-PSAC/PSDC Power Supply Module
u AOT03-31 Series Optical Transmitter Module
u AOR03-31/32 Optical Receiver Module
u AOR03R-31 Reverse Optical Receiver Module
u AOT03R-31 Reverse Optical Transmitter Module
u AOT1550-02-31/32 EDFA Module
u AOT155D-31 1550nm Direct Modulation Optical Transmitter Module
u ARSW01-31 RF Switch Module
u AOSW01-31 Optical Switch Module
u APA01-31 RF Pre-amplifier Module

Specifications
General
RF Connector F type
Dimension 483mm(W)X133mm(H)X436.5mm(D)
Weight 5.8Kg
Installation Standard 19” 3U rack-mounting
Status Display TFT LCD
Status Monitoring Local or remote SNMP
Operating Temperature -20℃~+50℃ （-4°~+122°F）
Storage Temperature -40℃~+85℃ （-40°~+186°F）
Relative Humidity 15~95% non-condensing
2 power supply modules, 1 network management control
Modules Supported
module and 10 application modules
CAN RJ11, support stacking
DC Power supply Optional 24VDC


Product Datasheet
AOS03III Series

AOS03III-C Control module /AOS03III-CM network management control module
Introduction
AOS03III-C is only for local control, installed in one of the horizontal
slots of AOS03III chassis. With a SNMP network management module
inside, AOS03III-C upgrades to AOS03III-CM network management
control module. An AOS03III platform has at least one AOS03III-C
control module, while SNMP module can be added when it is needed.
AOS03III-C/CM module has in front a large full-color TFT LCD display
screen, operations buttons, the power status indicator and a RS232
port, and on the back an RJ45 port for SNMP networks management
and a CAN connection port.

The control module is not only a human-machine interface (HMI), but also a gateway for all application modules.
After configuration, the operating parameters are stored in the application modules and backup in the control
module as well. AOS03III-CM module can collects data from local HMI or remote SNMP management server and
forward it to the application modules, extract data for each modules to display on the local LCD screen, or
forward it to a remote SNMP management server. Several AOS03III-C control modules connected by CAN wire
can be stacked and connect to a AOS03III-CM as a SNMP network management agent. The management control
module features classic button layout, innovative large screen full color TFT LCD display, fashionable menu
(English and Chinese) and user-friendly operation. It has a backup of parameters of all modules, which help
restore the configuration parameters or configure new replacement modules easily. Operators can complete
software upgrade of the machine and application modules locally (from the RS232 port) or remotely.

Features
u Hot swapping for plug-and-play.
u Agency mode. After configuration, application modules operate normally even if there is no network
management control module.
u Stacking. Using CAN technology, multiple chassis (control modules) can be stacked and managed by
one network management module to save the IP address resources and lower the equipment
investment.
u Color TFT screen with friendly human-machine interface, easy to operate.
u Online software upgrade.
u Copy, backup, restore parameters, convenient for the system configuration.
u Standard SNMP with standard RFC and US standard MIB.
u Multilingual interface. User can select a language in menu.


Product Datasheet
AOS03III Series

Specifications
Technical
Data Interface RS232
Data Format 8,1,0,115200
IP Interface RJ45
Data Rate 10/100M adaptive
Display Screen 2.2”（176×220）TFT LCD
Status Indicator 2 two-color LEDs for power supply modules
Communication Protocol Standard SNMP
SNMP Data Format RFC, US MIB
Alarm Buzzer, Icon flash and Icon change
Stacking CAN
General
Dimension 99mm(H)X33mm(W)X276.5mm(D)
Weight 0.88Kg (without network management module)
Power Consumption 5W
Installation Plug-in for AOS03III chassis
Operating Temperature -25℃~+50℃ （-7°F~+122°F）
Storage Temperature -40℃~+85℃ （-40°F~+186°F）
RH 15~95%（non-condensing）


Product Datasheet
AOS03III Series

AOS03III-PSAC/PSDC power supply module
Introduction
Power supply modules are installed in two special vertical slots of the
chassis. The module front panel has one cooling fan, one power switch
and one buckle. The back panel has a power socket, auto-locking device,
fuse bases (one spare base). The module has delicate protection circuits,
including overload protection, over-voltage protection, short circuit
protection, overheating protection, time delay activation. Single or dual
(backup) power supply can be monitored on display of local control
module or remotely by standard SNMP network management software.

Features
u Small size with high efficiency.
u Delicate protections, including short circuit protection, overload protection, over-voltage protection,
and overheating protection.
u Independent cooling fan.
u Dual independent power supply for hot backup between modules, no peripheral circuit needed.
u Real hot-swapping for plug and play.

Specifications
Technical
Input Voltage 150~265VAC (AOS03III-PSAC) or -48VDC (AOS03III-PSDC)
Output Voltage Stability 0.5%
Load Stability ≤2%
PARD and Noise
Vpp≤0.5% output voltage
(Resistive Load Voltage)
a. overload 130%
b. over-voltage 130%
Protection c. short-circuit output near 0V(recover after troubleshooting)
d. overheating
e. startup-delayer 500ms≤T≤2s startup
Input-Ground/Input-Output: AC1.5KV 5mA;
Insulation Strength
Output-Ground: AC0.5KV 5mA, insulation resistance>50MΩ
MTTF ≥10,000 hours
Power-factor ≥0.9 （load≥30%）
Operating Voltage +18Vdc
Operating Current Min. 0.4A
Operating Current Max. 20A


Product Datasheet
AOS03III Series

General
Dimension 44.6mm(H)X88.6mm(W)X386.8mm(D)
Weight 1.75Kg
Power Consumption 360W
Installation Plug-in for AOS03III chassis
Status Indicator Two-color LED (green/red)
Locally on screen or remotely by SNMP system via AOS03III-CM
Monitoring
network management control module
Storage Temperature -40℃~+85℃ (-40°~+186°F)
RH 15～95% (non-condensing)


Product Datasheet
AOS03III Series

AOT03-31 series optical transmitter module
Introduction
AOT03-31 optical transmitter module takes up one AOS03III slot. One chassis can have
high installation density of 10 transmitter modules. The module front panel has a status
indicator, a RF test port (TP) and an optical output port. The back panel has blind-mate
RF connectors and a power/signal connector. It is easy to install and maintain.

Taking advantages of brand GaAs module and low power consumption design, the heat
value reduces to a very low level, which greatly improves the product stability. Input
level controlled by AGC can automatically achieve the best performance, while manual
adjustment is an option (MGC) to meet user specific requirements. Independent
narrowcast input port is available to mix RF signals for optical transmission.

Exclusive pre-distortion correction technique minimizes the nonlinear distortion. Excellent laser precise control
program includes heating and refrigerating control, electric on-off sequence control, hot-swapping control,
power-off control, ensures the laser diode a long life-span with stability.

The total intelligent design automatically regulates these functions. The module can be monitored and
controlled by a local control module or remote SNMP management software to meet user’s needs.

Features
u 870/1000MHz platform.
u AGC/MGC with digital control attenuator integrated.
u Patent pre-distortion correction technique.
u Intelligent design with parameters back up, restore and reset, and software online upgrade.
u Low power consumption, low heating value, high stability and environmental friendliness.
u Plug and play, blind-mate RF connector.

Specification
Optical
Wavelength 1310±20nm
Reflection Loss ≥45dB
Connector SC/APC or FC/APC
4dBm(≥2.5mw) 6dBm(≥4mw)
8dBm(≥6mw) 9dBm(≥8mw)
Output Power 10dBm(≥10mw) 11dBm(≥13mw)

Product Datasheet
AOS03III Series

RF
Bandwidth 45~870/1000MHz
Input level Broadcast: 75dBuV/ch (59 PAL channels+300MHz digital signal)
Narrowcast: 85dBuV
AGC ±5dB
Reflection Loss ≥16dB(47~550MHz), 14dB(550~862/1000MHz)
Flatness ±0.75 dB
TP Level -20dB(Laser input)
TP port (B.S.) on front panel
RF Connector
Input port (B.S.) on back panel
CSO≥64dB Min. 10KM fiber loss, optical
CTB≥68dB attenuator, optical receiver input
Link Performance
XM≥65dB @-1dBm and 59 channels PAL-D TV
C/N≥52dB signals.
General
Dimension 130mm(H)X30.5mm(W)x431.8mm(D)
Weight 1.2Kg
Power Consumption ≤14W
Monitoring
Operating Temperature -20℃~+50℃ (-4°~+122°F)

Ordering information
Model Basic Information
Output optical Working Optical RF RF input Amplifier
- - - TP Nos.
power(dBm) bandwidth connector connector Nos. module Nos.
AOT03-31
8: 870MHz S:SC/APC M: Metric 1: Single 1: Single 1: Single
- XX - -
1: 1GMHz F:FC/APC I: Imperial 2: Dual 2: Dual 2: Dual


Product Datasheet
AOS03III Series

AOR03-31/32 optical receiver module
Introduction
AOR03-31/32 optical receiver module take ups one AOS03III chassis slot. It supports
dual-path backup automatically. A chassis can install ten receiver modules, up to 20
optical inputs and 10 paths RF outputs. The front panel has a status indicator, a RF test
port, optical input ports, and back panel has a blind-mate RF connector and a
power/signal connector. The installation and maintenance is very easy. Taking
advantages of brand GaAs module and low power consumption design, the heat value
stays at a very low level, which greatly improves the product stability.

This module has two independent RF paths with two independent optical AGCs and electronic AGCs, and ASC RF
output control, which ensures stable output level. Two independent paths of optical control and electronic
control RF switching circuits are hot backup, either optical input signal or electrical input signal is faulty, the
machine can switch to the other path. This ensures uninterrupted signal transport, and the switching threshold
can be set by users. Output level and equalizer can be adjusted for easy level distribution and cable transmission.
controlled by a local control module or a remote SNMP management software to meet user’s needs. This high
performance receiver module is particularly suited to head-end use and self-healing network.

Features
u 45~870/1000MHz platform.
u Dual independent optical path with independent optical AGC, electrical AGC, ASC and MGC ensuring
stable output.
u Independent path of optical control and electronic control RF switching circuits are hot backup, and the
switching threshold can be set by users, which ensures uninterrupted signal transport,
u Intelligent design with parameters back up, restore and reset, and software online upgrade.
u Plug and play with blind-mate RF connector.

Specifications
Optical
Wavelength 1290~1600nm
Reflection Loss 45dB (Min.)
Connector SC/APC
Input Power -6~+2dBm


Product Datasheet
AOS03III Series

RF
Frequency Bandwidth 45～870/1000MHz
Output Level 96dBuV@-6~+2dBm optical input
AGC ±5dB
Slope Control 0-3dB
Flatness ±0.75dB
Output Impendence 75Ω
TP Level -20dB
Connector
CSO≥64dB Min. 10KM fiber loss, optical
CTB≥68dB attenuator, optical receiver input
Link Performance
XM≥65dB @-1dBm and 59 channels PAL-D TV
C/N≥52dB signals.
General
Dimension 130mm(H)X30.5mm(W)X431.8mm(D)
Weight 1.19Kg
Monitoring

Frequency Fiber RF Optical receiving
- -
bandwidth connector connector component
AOR03-31 (Single input)
AOR03-32 (Dual input) P: PIN diode
8: 870MHz S: SC/APC M: Metric
- - O: Photoelectrical
1: 1G F: FC/APC I: Imperial
integrated module


Product Datasheet
AOS03III Series

AOR03R-31 reverse optical receiver module
Introduction
AOR03R-31 reverse optical receiver module take ups one AOS30III slot. It supports
four-path independent reverse optical inputs. A chassis can install 10 receiver modules,
up to 40 optical inputs and 40 RF outputs. The front panel has a status indicator, a RF
test port, optical input ports, and back panel has blind-mate RF connectors and a
power/signal connector. The installation and maintenance is very easy. Taking
advantages of brand GaAs module and low power consumption design, the heating
reduces to a very low level, which greatly improves the product stability.

The RF channel has independent optical AGC and output level adjustment function, which ensure stable output
level. It features wide dynamic optical receiving range, high output level, low noise and high nonlinear ratios to
meet various kinds of applications. It automatically shut off RF output when optical input is not available. This
greatly suppresses the gathering noise for easy online hot backup. Each RF channel can be manually switched
on/off by software locally or remotely, which is convenient for troubleshooting. Users can choose the test port
by software as well.


Features

u High density. One 3U chassis can install 10 optical receiver modules, up to 40 optical inputs and 40 RF
outputs.
u Four independent channels with independent optical AGC and manual MGC to ensure stable level
output.
u Wide dynamic optical receiving range, high output level, low noise and high nonlinear ratios.
u Intelligent design, low power consumption, low heating value, high stability and environmental
friendliness.
u Plug and play with blind-mate RF connectors and a power/signal connector.
u Complete functions, high reliability.


Product Datasheet
AOS03III Series

Specifications
Optical
Wavelength 1290~1600nm
Reflection Loss 45dB (Min.)
Connector SC/APC
Input Power -20~0dBm
RF
Frequency Bandwidth 5~200MHz
Output Level 90dBuV@-20~0dBm optical input
Optical AGC -20~+0dB optical input
Flatness ±0.75dB
TP Level -20dB
Connector
Link Performance NPR≥30dB, NPR dynamic range≥20dB
General
Dimension 130mm(H)X30.5mm(W)X431.8mm(D)
Weight 1.3Kg
Monitoring
RH 15～95% (Non-condensing)

Working Optical RF
- - RF output Nos.
bandwidth connector connector
1: 4-in-1
AOR03R-31 2: 2 independent
- - 3: 2X2-in-1
2: 200MHz F: FC/APC I: Imperial
4: 4 independent
5: 2-in-1 auto-switching


Product Datasheet
AOS03III Series

AOT03R-31 reverse optical transmitter module
Introduction
AOT03R-31 reverse optical transmitter module features low noise and adjustable gain
control, simple structure, low power consumption, APC control and high reliability. It is
applicable for 1310nm or 1550nm reverse fiber optical transmission system. The built-in
microprocessor achieves real-time monitoring of the laser working status and output
power. When reverse optical transmitter module operates in abnormal status, it will be
reported by the status LED or through the data bus with corresponding alarm
information. If a serious alarm occurs, the microprocessor will automatically turn off the
laser. Users can monitor the transmitter and run fault diagnosis by a network
management control module.

Features
u High density. One 3U frame can hold ten reverse optical transmitter modules.
u APC for stable level output.
u Low noise and adjustable gain control, simple structure, low power consumption, complete functions
and high reliability.
u Intelligent design, two-color status indicator, configuration parameters set locally/remotely,
configuration parameters can back up, restore, and reset, software online upgrade.
u Plug and play with blind-mate RF connector and power/signal connector.

Specification
Optical
Wavelength 1310±20nm; 1550±20nm
-3dBm(≥0.5mw)
0dBm(≥1mw)
Output Power
3dBm(≥2mw)
6dBm(≥4mw)
Output Power stability ≥±0.5dB@25℃
Connector SC/APC
RF
Working Bandwidth 5~200MHz
Impendence 75Ω
Flatness ±0.5dB
Input Level 75±5dBuv
TP level 75±1dBuv
RF Connector Imperial
Link Performance NPR≥30dB, NPR dynamic range ≥20dB

Product Datasheet
AOS03III Series

General
Dimension 130mm(H)×30.5mm(W)×431.8mm(D)
Weight 1.1Kg
Monitoring

Output Working Optical RF Laser
- - - Laser
Optical Power bandwidth connector connector configuration
AOT03R-31 L: 0.5~1mw
6: 65MHz S: SC/APC M: Metric F: FP I: With isolation
- M: 1~2mw - -
2: 200MHz F: FC/APC I: Imperial D: DFB P: No isolation
H: >2mw


Product Datasheet
AOS03III Series

AOT1550-02-31/32 Erbium-doped fiber amplifier module
Introduction
Erbium-doped fiber amplifier module features low noise and high gain, simple structure,
and high reliability. It is applicable for 1550nm fiber optical transmission system. The
built-in microprocessor achieves real-time monitoring of pump laser working status and
input/output power. When the amplifier module operates in abnormal status, it will be
reported by the status LED or through the data bus output corresponding alarm
information. If a serious alarm occurs, the microprocessor automatically turns off the
lasers to protect the module. Users can monitor the amplifier module and run fault
diagnosis by a network management control module.

Features
u High density. One 3U frame can hold ten optical fiber amplifier modules.
u ATC and APC for stable level output.
u Low noise and adjustable gain control.
u Intelligent design, two-color status indicator, configuration parameters set locally/remotely,
configuration parameters can back up, restore, and reset, software online upgrade.
u Complete functions and high reliability

Specifications
Technical
Wavelength 1550±nm
Input Power -3~+10dBm
Output Power 13~24dBm
Noise ≤5.0dB(@Pin=0dBm)
Input Impendence ≥30dB
Output Impendence ≥30dB
Output Pump Leakage Power ≤-30dBm
Input Return Loss ≥60dB
Output Return Loss ≥60dB
Polarization Dependent Gain ≤0.5dB
General
Dimension 130mm(H)×30.5mm(W)×431.8mm(D)
Weight 1.3Kg
Monitoring
Operation Temperature -20℃~+50℃ (-4°~+122°F)


Product Datasheet
AOS03III Series

Output optical
- Nos. of output - - Fiber connector
AOT1550-02-31 (single pump) power
AOT1550-02-32 (dual pump) S: SC/APC
- 1, 2, 3, 4 - XX -
F: FC/APC


Product Datasheet
AOS03III Series

AOT155D-31 direct-modulation optical transmitter module
Introduction
AOT155D-31 direct-modulation optical transmitter module takes up one AOS03III slot.
One chassis can have high installation density of 10 transmitter modules. The module
front panel has a status indicator, a RF test port (TP) and an optical output port. The
back panel has blind-mate RF connectors and a power/signal connector. It is easy to
install and maintain.

Taking advantages of brand GaAs module and low power consumption design, the heat
value reduces to a very low level, which greatly improves the product stability. Input
level controlled by AGC can automatically achieve the best performance, while manual adjustment is an option
(MGC) to meet user specific requirements. Independent narrowcast input port is available to mix RF signals for
optical transmission.

Exclusive pre-distortion correction technique minimizes the nonlinear distortion. Excellent laser precise control
program includes heating and refrigerating control, electric on-off sequence control, hot-swapping control,
power-off control, ensures the laser diode a long life-span with stability.


Features
u 870/1000MHz platform.
u AGC/MGC with digital control attenuator integrated.
u Patent pre-distortion correction technique to achieve excellent non-liner performance.
u Intelligent design with local or remote configuration.
u Plug and play, blind-mate RF connector.

Specifications
Optical
Wavelength 1550±5nm or ITU wavelength optional
Connector SC/APC
Output Power 6dBm(≥4mw) 8dBm(≥6mw) 9dBm(≥8mw) 10dBm(≥10mw)


Product Datasheet
AOS03III Series

RF
Bandwidth 45~870/1000MHz
Input level 75dBuV/ch (59 PAL channels+300MHz digital signal)
Digital input level @ 95dBuV
AGC ±5dB
Flatness ±0.75 dB
TP Level -20dB(Laser input)
RF Connector
CSO≥60dB
Link Performance (59 PAL chs) CTB≥65dB
C/N≥51dB
General
Weight 1.2Kg
Monitoring

Output optical Operating Fiber RF
- -
power (dBm) bandwidth connector connector
AOT155D-31
- XX -
1: 1GMHz F: FC/APC I: Imperial


Product Datasheet
AOS03III Series

ARSW01-31 RF switch module

Introduction
ARSW01-31 is a 3U RF switch module featuring manual and automatic RF signal
switching (AB dual path), and user-friendly operation. It is applicable for various systems
that require RF signal control, switching and redundancy backup.

Features
u High density. One 3U frame can hold ten RF switch modules.
u A/B path RF signals auto switching.
u Intelligent design, two-color status indicator, configuration parameters set
locally/remotely, configuration parameters can back up, restore, and reset, software online upgrade.
u Low power consumption, low calorific value, high stability and environmental friendliness.
u Complete functions and high reliability.

Specifications
Technical
Bandwidth 5~870/1000 MHz
In-band Flatness ±0.5 dB
Insert Loss ≤1.5 dB
Operational Level 75~115dBuV
Switching Time ≤10ms
Switching mode Manual/Auto
Isolation (A/B) ≥45 dB
Default Switching Level 70dBuv (60chs analog signal)
TP Level -20±1db vs. output port
RF port TP port (B.S.) on front panel; Input port (B.S.) on back panel
General
Weight 1.0Kg
Monitoring
RH 15~95% (non-condensing)

- Operating bandwidth RF connector
ARSW01-31
- 8: 860MHz 1: 1GMHz M: Metric I: Imperial

Product Datasheet
AOS03III Series

AOSW01-31 optical switch module
Introduction
AOSW01-31 is a 3U optical switch module featuring automatic optical signal switching
and friendly operation. It is applicable for various systems that require optical signal
control, switching and redundancy backup.

Features

u High density. One 3U frame can hold ten optical switch modules.
u A/B path optical signals auto switching.
u Intelligent design, two-color status indicator, configuration parameters set
locally/remotely, configuration parameters can back up, restore, and reset, software online upgrade.
u Low power consumption, low calorific value, high stability and environmental friendliness.
u Complete functions and high reliability.

Specifications
Technical
Wavelength 1260~1360nm or 1510~1610nm
Insert Loss ≤1.5dB
Polarization Dependent Loss ≤0.1dB
Return Loss ≥55dB
Channel Crosstalk ≥60dB
Repeatability ≤±0.02dB
Transmission Power ≤500mW
Switching Time ≤10mS
General
Weight 1.0Kg
Monitoring

AOSW01-31 (2X1) - Wavelength Fiber connector
AOSW01-32 (2X2) - 1: 1310nm 2: 1550nm 3: Dual S:SC/APC F:FC/APC


Product Datasheet
AOS03III Series

APA01-31 RF pre-amplifier module
Introduction
APA01-31 is a 3U RF pre-amplifier module. The module is applicable for various systems
that require control, amplification and monitoring of RF signals.

Features
u Operating bandwidth 47~862/1000MHz.
u Gain control ranges 10~20dB by 0.5dB stepping.
u Gain and slope control can be set by stepping locally/remotely.
u Intelligent management ensures best performance of amplifier components at
different input electrical level.
u Parameters displayed on the LCD in the front of chassis.

Specifications
Technical
Bandwidth 47 MHz~1000 MHz
Rated Max. Gain 20 dB
In-band Flatness ±0.75 dB
Rated Input Level 80dBuV
Max. Input Level ≤90dBuV
Rated Output Level 100dBuV
Max. Output Level 104dBuV
CTB ≥ 70dB @ rated input/output
CSO ≥ 66dB @ rated input/output
Input/output Return Loss ≥16dB (47~550MHz), 14dB (550~862/1000MHz)
Gain Regulating Range 10~20dB
Slope Regulating Range 0~4dB
TP Level -20±0.5dBmV vs. RF output
General
Dimension 99mm(H)X33mm(W)×276.5mm(D)
Weight 1.1Kg

- Operating bandwidth RF connector
APA01-31
- 8:860MHz 1:1GMHz M: Metric I: Imperial


3RU AOS03 Catv optical transmission platform

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Similar to 3RU AOS03 Catv optical transmission platform

Similar to 3RU AOS03 Catv optical transmission platform (20)

More from Shanxi Cai

More from Shanxi Cai (14)

Recently uploaded

Recently uploaded (20)

3RU AOS03 Catv optical transmission platform