SMART DUSTBIN USING
ARDUINO AND ULTRASONIC
SENSOR
 SHAIKH MOHAMMED AMMAR (191080071)
 RAKESH RAJPUROHIT
WHAT IS THE SMART DUSTBIN?
(AIM)
• Waste management is becoming complex and difficult day-by-
day so for a short solution to this problem we have
implemented the smart dustbin.
• The project is based on sensor based circuitry which works
automatically. It opens up automatically if some garbage comes
nearby to the sensor
• Usually dustbins require human interaction, it is somewhat
hectic for the user to check for the level of garbage frequently,
so this helps a lot.
WHAT WILL IT DO?
• The smart dustbin project consists of a sensor to detect human
parts, the sensor will automatically generate a signal, and will open
automatically press its lever
• It opens automatically; when it receives the signal and locks after a
few seconds own it’s own
COMPONENTS REQUIRED
• Arduino Uno
• Servo motor
• Ultrasonic Sensor
• Dustbin or Container
• Jumper wires
CIRCUIT DIAGRAM
HOW IT WORKS?
• Suppose if the ultrasonic sensor detects a hand or a leg of a human
being or any other object placed nearby, then Arduino will measure
the distances, if the distance is less than the predefined value then the
Motor will be activated and Arduino servo motor will start and hence
the head of the dustbin will be opened which is attached with the
servo motor.
• After a few seconds, it will automatically close.
• Because the predefined value is given, it can easily be changed.
WHERE IT WILL BE USED?
• The smart dustbin can be used in offices to store a vast amount of
papers.
• It occupies less space so that it can be easily used in homes.
• It also plays an essential role in public places.
Smart dustbin using arduino and ultrasonic sensor

Smart dustbin using arduino and ultrasonic sensor

  • 1.
    SMART DUSTBIN USING ARDUINOAND ULTRASONIC SENSOR  SHAIKH MOHAMMED AMMAR (191080071)  RAKESH RAJPUROHIT
  • 2.
    WHAT IS THESMART DUSTBIN? (AIM) • Waste management is becoming complex and difficult day-by- day so for a short solution to this problem we have implemented the smart dustbin. • The project is based on sensor based circuitry which works automatically. It opens up automatically if some garbage comes nearby to the sensor • Usually dustbins require human interaction, it is somewhat hectic for the user to check for the level of garbage frequently, so this helps a lot.
  • 3.
    WHAT WILL ITDO? • The smart dustbin project consists of a sensor to detect human parts, the sensor will automatically generate a signal, and will open automatically press its lever • It opens automatically; when it receives the signal and locks after a few seconds own it’s own
  • 4.
    COMPONENTS REQUIRED • ArduinoUno • Servo motor • Ultrasonic Sensor • Dustbin or Container • Jumper wires
  • 5.
  • 6.
    HOW IT WORKS? •Suppose if the ultrasonic sensor detects a hand or a leg of a human being or any other object placed nearby, then Arduino will measure the distances, if the distance is less than the predefined value then the Motor will be activated and Arduino servo motor will start and hence the head of the dustbin will be opened which is attached with the servo motor. • After a few seconds, it will automatically close. • Because the predefined value is given, it can easily be changed.
  • 7.
    WHERE IT WILLBE USED? • The smart dustbin can be used in offices to store a vast amount of papers. • It occupies less space so that it can be easily used in homes. • It also plays an essential role in public places.