This document provides instructions for three separate issues: 1. Instructions to disable automatic restarting when shutting down a Windows computer. 2. Steps to disable the Mpegport.sys driver or turn off hardware-enforced data execution prevention if the driver causes reboot issues during shutdown. 3. Instructions to remove Roxio Easy CD Creator software and associated files from the registry and services to resolve potential compatibility problems.

1. shutdown -s
1. klik kanan My Computer->Properties
2. klik tab Advanced
3. di bagian Startup and Recovery, klik Settings
4. "Automatically restart" jgn di centang,
5. restart comp
REBOOT ON SHUTDOWN WITH HARDWARE-ENFORCE DATA EXECUTION PREVENTION. If your computer uses
hardware-enforced DEP, as the 64-bit AMD processors do, and you installed hardware that requires the MPEGPORT.SYS driver,
there is a conflict. At shutdown, the driver tries to run from the same memory space DEP monitors. A 0xFC Stop message occurs. If
your computer is set to automatically reboot on a system failure, it will simply reboot instead. The solution is a new driver.
Microsoft provides a work-around in MSKB 878474.
To work around this problem, disable the Mpegport.sys driver in Device Manager by using Safe Mode. To do this, follow these
steps:
1.Restart your computer.
2.Press the F8 key. On a computer that is configured to start multiple operating systems, press F8 when the Startup menu appears.
3.Use the arrow keys to select a Safe Mode option, and then press ENTER.
4.Click Start, click Run, type devmgmt.msc, and then click OK.
5.In the View menu, click Show hidden devices.
6.Expand Non-Plug and Play Drivers.
7.Right-click the Mpegport.sys driver, and then click Properties.
8.On the Driver tab, change the Startup Type to Disabled, and then click OK.
9.Restart your computer.
If you require the Mpegport.sys driver, you can also turn off DEP. To turn off DEP, follow these steps:
1.Restart your computer.
2.Press the F8 key. On a computer that is configured to start multiple operating systems, press F8 when the Startup menu appears.
3.Use the arrow keys to select a Safe Mode option, and then press ENTER.
4.Click Start, click Run, type cmd, and then click OK.
5.At the command prompt, type the following, and then press ENTER:
bootcfg /raw “/noexecute=alwaysoff /fastdetect” /id 1
If you have multiple start entries or start options, you may have to manually modify the Boot.ini file for your computer. To disable
DEP by modifying the Boot.ini file, change the /noexecute policy level to alwaysoff.
6.Restart your computer.
The Roxio Easy CD Creator 5.0 or Direct CD 5.0 program is installed on your computer.
1.Remove the Easy CD Creator software.
2.Click Start, click Run, type Regedit in the Open box, and then click OK.
3.Locate the following registry key:
HKEY_LOCAL_MACHINESystemCurrentControlSetSecuri ty
4.Remove the Etetnt.mpd file that has a revision date of 1997.
5.Locate the following registry key:
HKEY_LOCAL_MACHINESystemCurrentControlSetServic es
6.Remove the following files:
- Cdr4vsd
- Cdralw2k
- Cdr4_2k
- Cdudf
shutdown -f -s