Installing TP-Link PS310U V2 on Windows 10, without having to run MFP Server Application. Since the Windows 10 keep showing Blue Screen Of Death (BSOD) on running MFP Server, i have come up with this idea. Combination of Bonjour approaches that i got from Internet.

1. UsingTL-PS310U V2 on Windows10 without running the MFP & Storage ServerApplicationall the
time.
1. Configure the TL-PS310U V2 (TLP Device) asusual.Example lookbelow setting(sampleisusing
IP 192.168.1.147). Youcan browse yourTLP Device using commonbrowser.
Once you can do this,itmeansthat the TLP Device isonyour networkandyouare readyto
setupthe printer.Inthiscase,im usingmyCanonInkjetiP2700 Series(iP2770).
2. OpenDevice &PrintersonControl Panel,orPressWindow Button,thentype “Printer”then
Enter.Thenyou will see belowimage.

2. 3. Click“Adda printer”.Thenit will automaticallysearchfordevices.Instead,click“The Printer
that I wantisn’tlisted”.

3. 4. Thenit will showAddPrinterpage.Youwill be shownsome selections.Select“Addalocal
printeror networkprinterwithmanual settings”.Thennext.
5. On the nextpage,youwill be askedforprinterport.Inthiscase select“Create anew port”, then
select“StandardTCP/IPPort”.Thennext.
6. Nextpage youwill be askedforIPaddressof you device.PutinyourTLP Device’sIPAddressand
on the Port Name,addsome text.Forexample,192.168.1.147_X. AlsorememberNOTtotick

4. the “Querythe printerandautomaticallyselectthe drivertouse”.
7. You, thenwill be shownapage withDetectingTCP/IPPort.Waita few minutesdependsonyour
networkconfiguration.Itwill show youthatthe systemcannotfindanydevices.Don’tworry,
thisisas expected.Thenyouwill be shownthe page likenextpage.
Select“Custom”thenclick“Settings…”.

5. 8. Thenyou will be poppedoutawindow like below.
SelectProtocol to“LPR”. In thiswindow popup,youneedtofill inthe LPR Settings,the “Queue
Name”.The Queue Name istakenfromMFP Application.Follow the redarrow ().

6. 9. Above image isexampleformycase.For yourcase it wouldbe differenttoeachTLP Devicesand
Printerdevices.
Then,put the Queue Name fromMFPApplicationtopreviousWindow Popup.Itwill be
somethinglikethis.
Let othersettingasis.ThenPress OK,you will be backto previouswindowpage.

7. 10. In thispage,justclickNext.
11. You will be askedtoselectyourprinterdriver.Selectbasedonyourprintermodel andtype from
Windowsstandarddrivers.Oryoucan use from yourprinterCD/DVDsetupkit.
Afterdone selecting,thenNext.
12. Thenyou will be askedwhetheryouwouldliketouse currentdriverorreplace it.Thisis only
happenwhenyoualreadyhave printerdriverbefore.Iassume thatyouhave installed

8. previously.So,Iwouldselecttoreplace like screenbelow.
13. Thenput the name of yourcomputerhere.My example,will have Copy1since Ihave the
printeralreadyinstalled.Youcanrename asfree as youwantedto.

9. 14. Also,if youwantto share yourprinterovernetworkyoucan alsosetinhere. But for mycase,i
didn’tshare.
15. Last but not least,thisisthe endof installingprocess.Setthisprinterasdefaultbytickingthe
selection“Setasthe defaultprinter”ornot.Alsoif youwantto do Printtest,justpressthe
button“Printa test page”.ThenFinish.Hope itworksforyou guys.