The document provides instructions for installing and configuring the Sharetech HiGuard Pro device. It describes connecting the hardware, including the console port, DMZ port, WAN ports and LAN port. It then outlines the 4 step configuration process which includes starting the browser to access the device's IP address, changing the language settings, configuring the internal network, and setting up the external network connections and detection. The summary provides a high-level overview of the key sections and configuration steps involved in installing and setting up the Sharetech HiGuard Pro device.

1. SHARETECH HIGUARD PRO
QUICK INSTALLATION
www.sharetech.com.tw / www.higuard.com

2. HARDWARE INSTALLATION
Front
Panel
1. Console Port: A DE-9 console port for inspecting settings remotely or, if needed,
resetting the device to factory default.
2. DMZ Port: The demilitarized zone (DMZ) is a physical subnet set aside for allowing
external users from the Internet to access the company’s servers. Even
though servers located in the DMZ allow external access, they still
receive security protection from the HiGuard Pro.
3. WAN 2 Port: Connects to the perimeter router.
4. WAN 1Port: Connects to the perimeter router.
5. LAN Port: Connects to the Intranet

3. HARDWARE INSTALLATION
Power Indicator:
Lights up when the power is
on.

4. HARDWARE INSTALLATION
Deployment
IP: 192.168.1.1/24
Account/Password:
admin/admin
Connect RJ45 Crossover cable to
device management interface
Set network port at DHCP and
192.168.1.x/24 will be assigned as
IP segment
After getting the IP, Ping 192.168.1.1
to ensure network connection

5. SYSTEM SETTING (EASY CONFIGURATION)
Step 1.
Start
Browser
• IP: 192.168.1.1
• Account/Password:
admin/admin
Step 2.
Change
Language
• English
• Simplified Chinese
• Traditional Chinese
Step 3.
Set Internal
Network
Step 4.
Set External
Network
• WAN 1
• WAN 2

6. STEP 1. START BROWSER (IE)
 1.1 Enter Remote Login URL
 Open the IE browser, enter 192.168.1.1 in the address bar

7. STEP 1. START BROWSER (IE)
 1. 2 Enter Login Account / Password
 IE window pops up, please enter admin (user name)/admin(password) to log in.

8. STEP 1. START BROWSER (IE)
 1.3 Login Completed

9. STEP 2. CHANGE LANGUAGE
 Administrator can set their first language operating system, currently it is available
in English / Traditional Chinese / Simplified Chinese.

10. STEP 3. SET INTERNAL NETWORK
Note: If the management interface is assigned with
a different address, the management interface will
only become accessible from a web browser using
the new IP address.
1. Click on Network > Interface > LAN
2. Enter Internal Network Related info
3. Click “Save” to complete the setup

11. STEP 4. SET EXTERNAL NETWORK
1. Click on Network > Interface > WAN
2. Enter WAN Related info
4. General setting
3. Setup WAN Alive Detection

12. STEP 4. SET EXTERNAL NETWORK
 4.1.1 WAN 1 Setting [Network > Interface > WAN 1]
Input any word for recognition
Auto: Share loading on WAN automatically .
Manual: Share loading on WAN based on
administrators’ demands.
Only in “Static” mode is required.
Only in “Static” mode is required.
In Kbps, based on local ISP’s
WAN speed.

13. STEP 4. SET EXTERNAL NETWORK
 4.1.2 WAN 1 Setting [Network > Interface > WAN 1]
3 connection methods
(Static/DHCP/PPPoE)
Default is 255.255.255.0. Only in
“Static” mode is required.
Input new MAC address
In Kbps, based on local ISP’s WAN speed.

14. STEP 4. SET EXTERNAL NETWORK
 4.2 WAN Alive Detection
DNS/ICMP/NONE is used to check
WAN is available or not
3 modes
(PING/HTTP/HTTPS)

15. STEP 4. SET EXTERNAL NETWORK
 4.3 General Setting on WAN 1
DNS Server for WAN
Default is 168.95.1.1
DNS Server for WAN
Default is 168.95.192.1
HTTP port no. Default is 80
HTTP port no. Default is 443
Time period to check
availability. Default is 3 seconds.
Web UI auto-shut down. Default is 60 minutes.

16. INSTALLATION COMPLETED
 www.sharetech.com.tw / www.higuard.com
Please don't hesitate to mail us if you have further questions.
help@sharetech.com.tw