This curriculum vitae outlines the education and work experience of Remus Adrian Popovici as a commissioning and maintenance engineer. He has over 15 years of experience in mechanical maintenance, turnaround engineering, commissioning, and project management. He holds degrees in piping engineering, mechanical engineering, and safety and health. His work experience includes positions at Petromidia Romania, Agip KCO Kazakhstan, Petromar Angola, and Shell Gabon, where he oversaw maintenance, turnaround, and commissioning projects on equipment such as columns, heat exchangers, pressure vessels, tanks, and pipelines.
00 resume of site supervisor (Pipeline & welding)Mohammad Khan
Result-oriented with a fast-learning curve and an ability to take calculated risks, defining business mission and integrating resource strengths to deliver impeccable performances aligned to overall objectives .A dynamic professional offering over 15 years in the field of Site Supervisory position for (Pipeline), Erection in Pipeline, in Oil & Gas, Refinery, Petrochemicals, & Power Plant in Saudi Arabia, U.A.E, Kuwait & India for Various Eng. Construction Projects.
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
00 resume of site supervisor (Pipeline & welding)Mohammad Khan
Result-oriented with a fast-learning curve and an ability to take calculated risks, defining business mission and integrating resource strengths to deliver impeccable performances aligned to overall objectives .A dynamic professional offering over 15 years in the field of Site Supervisory position for (Pipeline), Erection in Pipeline, in Oil & Gas, Refinery, Petrochemicals, & Power Plant in Saudi Arabia, U.A.E, Kuwait & India for Various Eng. Construction Projects.
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
Senior Pipeline/ Piping Mechanical Engineer Construction & CommissioningMohamed Mustafa
Highly ambitious and self-motivated Project Management Professional with over 10 years in the Oil & Gas Industry in the fields of Project Construction & Commissioning. All experience enhanced by multi-functional business trips in United Arab Emirates, Oman, Algeria and Egypt for large scale EPC projects with Major EPC and Petroleum companies’ region.
Resume gede andi- construction piping supervisorandi dipayadnya
A senior construction supervisor (piping mechanical and structural) with more than 10 years experience in supervisory role, with a good knowledge of piping, structural, welding, rigging-lifting, scaffolding, HSE, etc.
Senior Pipeline/ Piping Mechanical Engineer Construction & CommissioningMohamed Mustafa
Highly ambitious and self-motivated Project Management Professional with over 10 years in the Oil & Gas Industry in the fields of Project Construction & Commissioning. All experience enhanced by multi-functional business trips in United Arab Emirates, Oman, Algeria and Egypt for large scale EPC projects with Major EPC and Petroleum companies’ region.
Resume gede andi- construction piping supervisorandi dipayadnya
A senior construction supervisor (piping mechanical and structural) with more than 10 years experience in supervisory role, with a good knowledge of piping, structural, welding, rigging-lifting, scaffolding, HSE, etc.
As a Mechanical Engineer in the Oil and Gas Industry, would like to continue to expose to the challenges and latest Technology in this industry and make the best use my education, acquired skills and experience for personal and Organization growth.
1. Curriculum Vitae of Commissioning and Maintenance Engineer Page 1 of 6 European Union Date: 11.10.2015
PERSONAL INFORMATION
Family Name & First Name POPOVICI REMUS ADRIAN
Address, Zip Code, City, Country Al. Lapusneanu Street, No. 173, Bl. T1, zip code 900419, Constanta, Romania
Home Phone +40732959482
Residential Address, City, Country Kleine Wolfskule Street, No.9, Eldagsen Standt, Springe ST city, Germany
Mobile +4915218049702
E-mail adrianpopovici7@gmail.com
Skype adrian.popovici77
Citizenship Romania
Date of birth 11.12.1977
Marital Status Married
EDUCATION
Date (from – to) 1997 - 2002 (5 years education)
Name of organizations Technical University ”Gheorghe Asachi”- Iasi, Romania
Type of educations or training Piping Engineer Degree Materials and Science Engineering
Validation of Certificate Unlimited Serial ˝U˝ No. 0003035
Date (from – to) 2003 - 2008 (5 years education)
Name of organizations Technical University ”Gheorghe Asachi”- Iasi, Romania
Type of educations or training Mechanical Engineer Degree Materials and Science Engineering
Validation of Certificate Unlimited Serial ˝G˝ No. 0054918
Date (from – to) 2008 - 2009 (1 year education)
Name of organizations Technical University ”Gheorghe Asachi”- Iasi, Romania
Type of educations or training Master Degree in Safety and Health at Work
Validation of Certificate Unlimited Serial ˝H˝ No. 0038552
TRAINING AND LICENCE
Name of organizations C.P.S.C.D.N. Training and specialization center for the nuclear domain working, staff
Nuclear REACTOR Bucharest – Magurele ROMANIA.
Type of educations or training Inspection for piping, boilers, recipients under pressure and hoist installation.
RT level “Radiography” practical, safety radiation, processing and interpretation of
radiographs. Authorization for nuclear activities on shielded satiation sources,
specialty NDT level 2, from CNCAN & RT level 2 and from ISCIR.
LANGUAGE SKILLS
OTHER LANGUAGES English Italian Françoise Russian
Reading skills Fluent Good
Writing skills Good Good
Verbal skills Fluent Good Beginner Beginner
TECHNICAL SKILLS AND COMPETENCES
-MS Office,ACCESS,EXCEL,WORLD
-Mancon
-SAP
-WMS(WorkManagementSystems)
-CMMS
- MEL (Master EquipmentList)
-TRAK
-WinPCS
-OPITO BOSIET
-OPITO H2S
-PTW (Permit To Work)
-LOTO (Lockout Tag Out)
-Training Face Fith
-CSE (Confined Space Entry)
-Training Radiation Safety Work
-Training Height Permit to Work
-Training STA (Safety Task Analysis)
-Training Heat Stress
-Training Hazards Identification
2. Curriculum Vitae of Commissioning and Maintenance Engineer Page 2 of 6 European Union Date: 11.10.2015
WORK EXPERIENCE
Date (from– to) Oct 2014 – Sept 2015
Name of company TMUCB Petromidia Romania
Type of business or sector Mechanical Maintenance and Turnaround Engineering
Occupation or position held Senior Mechanical Maintenance Engineer
Main activities and
responsibilities
Conceptualizing & designing plantpiping based customer’s drawings & reading piping isometrics in
accordance with API, ASME, ASTM, AWS Standards.
Guarantee timeliness and accuracyof construction or maintenance control information,including executed
work compliance with projecttechnical specifications and work progress certifications.
Visit FAT&SAT, vendors, consultantfacilities and work sites,to verify and establish design conditions and
assistduring construction,commissioning and troubleshooting offacilities .
Preparation Work Pack documentetion for Maintenance and Turnaround.
Prepare technical report, lists ofoutstanding items on a punch listsubmits itfor construction to carry out the
required test.
Reviews the documentation relevantto the systems and ensures the systems are constructed in accordance
with the prescribed information – drawings,specifications and vendor information.
Coordinates with ProjectManager and supervise the preparation oftestactivity to ensure all deficiencies are
identified and punch lists are prepared.
Review and approve subcontractor and supplier documentation including qualityplans,inspection and test
plans,manufacturing/welding procedures,inspections and testprocedures and manufacturing records.
Coordinates and monitors the hydro tests and reports on the completion ofhydro tests.
Interfaces with the Discipline Planning Teams to understand the construction schedule.
Carry-out Conceptdefinition and engineering studies,scopes,design and preparation ofengineering
documents as per approved standards and procedures.
Assesses the impactofinefficiencies on the successful completion ofplanned activities and adjustthe plan as
required.
Establishing inspection and testing requirements atmanufacturing premises for Tank’s,Equipments,Pipe and
Pipe lines.
Prepare documentation and Material Listfor roof plates and structural of the tanks whatmustprepare.
Participate to elaborate Maintenance or Construction Plan for tank’s,pipe system,pipe lines or equipments.
Scheduling and organizing specialistprojectexecution for Mechanical Maintenance/Installation Equipments.
Preparation Spare Parts listfor equipments.
Documentmanagement(technical,content,scheduling) and controlling specialistcommunication.
Involvement in drawing up internal and external projectreports;where is necessary,specialistmanagementof
technical projectteam.
Visit the site everyday as site surveillance,in order to conform the work according to the job specification.
Initiate, manage and where appropriate undertake specific engineering studies to improve scope definition and
resolve technical issues.
Supervise/Manage and monitoring the performance ofcontractors in related with the work activities for off/on
shore Maintenance jobs.
Review the construction work according to PI&D and approved construction drawings,solving and follow up
punch listitems until are closed.
Review and recommend approval/rejection ofany requests for variation or claims submitted bycontractors.
Assure the realization of works in the respectof the definite rules ofsafety.
Participate in the definition of the entrepreneur's dailycards ofwork and to get the necessaryauthorizations
(permitted work) for the setting up of work so definite.
Provides technical guidance for maintenance and reliabilitydata by evaluating the SAP data historyfor
accuracy, and ensuring compliance with the bestreliabilitypractices.
Identify and adopt correct HSE standards,according to companyprocedures,local norms and legislation.
Short description of
equipment on
Columns, heat exchangers, pressure vessels, tanks, pipelines/trunk lines and Deluge Systems.
Date (from– to) Jan 2013 – Aug 2014
Name of company Agip KCO Kazakhstan
Type of business or sector Integrated Commissioning and Acceptance Team
Occupation or position held Off-Shore Mechanical Commissioning and Start-up Engineer
Main activities and
responsibilities
Coordinates all tests and inspection activities on site within his area ofexpertise and coordinates with all
field stakeholders to ensure thatthe desired technical results are being obtained.
Managementof large commissioning site and ensuring thatICAT work is performed in accordance to the
documents approved for commissioning in terms ofHSSE,quality, schedule and budget.
Responsible for preparation,review and approval of key project documents for the commissioning phase
such as commissioning schedule.
Supervision ofcontractors on site and their staff, participate in the commissioning and start-up meetings
representing Agip KCO interests.
Responsible to ensure the construction ofthe systems is completed in accordance with prescribed
information prior to pneumatic and hydrostatic pressure tests being carried outfor all test packages.
Prepare technical report, lists ofoutstanding items on a punch listsubmits itfor construction to carry out
the required test.
3. Curriculum Vitae of Commissioning and Maintenance Engineer Page 3 of 6 European Union Date: 11.10.2015
Visit FAT and SAT, consultantfacilities,work at site and vendors to verify and establish design conditions
and assistduring construction,commissioning and troubleshooting offacilities.
Monitors the hydro‐testing (hydrostatic and pneumatic) and handle reports on the completion oftests and
to supervise line cleaning after hydro test as per ASME B31.8 Standard.
Responsible for the examination of Responsible for preparation,review and approval of key project
documents for the commissioning phase such as commissioning schedule.to ensure completeness,punch
lists preparation,and readiness for hydro tests activities.
Interfaces with equipment,piping,instrumentation,electrical inspectors,civil/structural inspectors,field
engineer and other field superintendentbefore proceeding for hydro tests of systems as per API 1104 and
ASME B31.8 Standards.
Carry-out Conceptdefinition and engineering studies,scopes,design and preparation ofengineering
documents as per approved standards and procedures.
Interfaces with the QA departmentrepresentative for his presence atthe test.
Reviews the documentation relevantto the systems and ensures the systems are constructed in
accordance with the prescribed information – drawings,specifications and vendor information.
Coordinates with ProjectManager and supervise the preparation oftestactivity to ensure all deficiencies
are identified and punch lists are prepared.
When the systems are to be tested,ensures the systems limits are identified,thatnecessarytest
equipmentis in place and reviews completion ofpunch listitems to ensure hydro tests may proceed.
Review and approve subcontractor and supplier documentation including qualityplans, inspection and test
plans,manufacturing/welding procedures,inspections and testprocedures and manufacturing records.
Coordinates and monitors the hydro tests and reports on the completion ofhydro tests.
Interfaces with the Discipline Planning Teams to understand the construction schedule.
Assesses the impactofinefficiencies on the successful completion ofplanned activities and adjustthe plan
as required.
Working closelywith the HUC contractor to plan the commissioning activities (offshore tasks).
Develop Detailed Commissioning Execution plans for Agip KCO scope of work.
Supporting HUC Contractor in the developmentand updates to the master commissioning database.
Participating and leading commissioning tasks associated with factory acceptance tests,pre-
commissioning,HUC,installation and startup.
Identifying interfaces related to commissioning the projectand recommending means to manage the
interfaces
Actively participate in Commissioning team meetings,sharing upcoming work and helping with overall
planning .
Liaise with operations start-up team in developing the overall startup strategy.
Assemble projectdocuments required for turnover to Operations .
Ensure adherence to the projectsystems completion work process safetyreviews;HAZIDs and HAZOPs,
Risk Managementreviews,SIMOPS reviews, Operations Readiness Reviews,Pre- Start Up Safety
Reviews
Ensures supportfor operational and start-up,accountable for progress and progress reporting,quantity
survey, projectdeviations and managementofchange.
Ensure commissioning evidence is recorded and documentation maintained in accordance with
procedures and in compliance with site license conditions .
Supportand maintain a culture of zero accidents or incidents relating to occupational and personal safety,
security, health issues and environmental matters.
Prepare the Commissioning documents and programs for those packages and systems in the designated
area of responsibilityas detailed by the Commissioning Manager.
Prepare the Commissioning documents and programs for those packages and systems in the designated
area of responsibilityas detailed by the Commissioning Manager .
Accept handover of equipmentand systems from pre-commissioning/HUC teams
Ensure commissioning procedures are followed as prescribed,assuring timelyand accurate signature
completion,maintaining hold pointcontrol at all times,and ensuring regular checks on qualityand
recording of data.
Supervise installation ofdeluge system piping works and underground fire fighting piping works.
Reports to supervisor work anomalies or contractual deviations committed bycontractor personnel and
recommend corrective actions.
Accept work permits on behalfof and to ensure that contractors compliance with conditions fixed on
consolidated work permits.
Direct involved and participate in developmentofas -builtdrawings/documentation.
Prepare Punch listfor finished work prior to hand over to by contractor by paying special attention to all
equipments including Qualitychecks.
Keep updated on commissioning progress and is aware ofany matter that may cause a schedule slippage
so that this can be recognized and mitigated against.
Keep implementation ofHealth & Safety at Work Act, Risk Assessment,Safe Systems of Work and
Environmental.
Engage with the End User so Operating Instructions and Maintenance Instructions are developed and
verified during commissioning activities and opportunities are maximized to undertake training to
operate/maintain the equipment.
Supervise the EPIC Contractors during the execution of construction activities at construction site
Provides leadership,resources,and follows up defined objectives for a project with complete responsibility
from Hand Over team to Commissioning.
Demonstrate a professional work ethic and actively participate as a member ofthe Discipline Workface
Planning Team.
Demonstrate a professional work ethic and actively participate as a member ofthe Discipline Workface
4. Curriculum Vitae of Commissioning and Maintenance Engineer Page 4 of 6 European Union Date: 11.10.2015
Planning Team.
Short description of
equipment on Columns, heat exchangers, pressure vessels, tanks, pipelines/trunk lines and Deluge Systems.
Date (from– to) Mar 2012 - Dec 2012
Name of company Petromar Angola
Type of business or sector Mechanical Maintenance and Turnaround Engineering
Occupation or position held Off-Shore Maintenance Engineer
Main activities and
responsibilities
Guarantee timeliness and accuracyof construction or maintenance control information,including executed
work compliance with project technical specifications and work progress certifications.
Preparation Work Pack documentetion for Maintenance and Turnaround.
Preparation Spare Parts listfor equipments.
Prepare maintenance/installation daily,weekly and monthly reports.
Study of the P&ID diagrams ofthe platform and Process stations for Commissioning.
Responsible for safety of all personnel involved in the operation.
Perform close outreport preparation and work progress certifications.
Carry-out Conceptdefinition and engineering studies,scopes,design and preparation ofengineering
documents as per approved standards and procedures.
Reviewing various maintenance reports such as PreliminaryFailure Reports,RootCause Analysis Reports,
Inspection Reports,etc..
Perform Material & EquipmentControl.
Perform Planning and monitoring (schedule,costand compliance ofwork to projectspecifications).
Managing engineering team and site supervisors.
Review and recommend approval/rejection ofany requests for variation or claims submitted bycontractors.
Assure the realization of works in the respectof the definite rules ofsafety.
Participate in the definition of the entrepreneur's dailycards ofwork and to get the necessaryauthorizations
(permitted work) for the setting up of work so definite.
Provides technical guidance for maintenance and reliabilitydata by evaluating the SAP data historyfor
accuracy, and ensuring compliance with the bestreliabilitypractices.
Identify and adopt correct HSE standards,according to companyprocedures,local norms and legislation.
Short description of
equipment on Columns, heat exchangers, pressure vessels, tanks, pipelines/trunk lines and Deluge Systems.
Date (from– to) Apr. 2011 - Jan. 2012
Name of company Shell Gabon
Type of business or sector Mechanical Maintenance and Turnaround Engineering
Occupation or position held Off/On-shore Area Supervisor
Main activities and
responsibilities
Promote a strong HSSE performance within the companyteam and contracting organizations.
Participate in HAZIDs / HAZOPs / PHSSERs and where there is an interface to be facilitated ensure that
relevant experience is represented atthese sessions.
Preparation Work Pack documentetion for Maintenance and Turnaround.
Developmentofstorage tank fabrication drawings including tank accessories such as roofstructure,staircase,
gauging system,pipe supportclip and etc as per API 1104 and ASME B31.8 Standards.
Carry-out Conceptdefinition and engineering studies,scopes,design and preparation ofengineering
documents as per approved standards and procedures.
Supervise and approve construction activities and co-ordinate various aspects ofprojectconstruction including
inspections,material submissions and working drawings from contractors,and processing documentation as
required.
Developmentoftechnical specification and work instruction.
Visit FAT/SAT , work sites,vendors and consultantfacilities to verify / establish design conditions and assist
during construction,commissioning and troubleshooting offacilities
Establishing inspection and testing requirements atmanufacturing premises for Tank’s ,Equipments, Pipe and
Pipe lines.
Prepare documentation and Material Listfor roof plates and structural of the tanks whatmustprepare.
Participate to elaborate Maintenance or Construction Plan for tank’s,pipe system,pipe lines or equipments.
Scheduling and organizing specialistprojectexecution for Mechanical Maintenance/Installation Equipments.
Preparation Spare Parts listfor equipments.
Documentmanagement (technical,content,scheduling) and controlling specialistcommunication.
Involvement in drawing up internal and external projectreports;where is necessary,specialistmanagementof
technical projectteam.
Visit the site everyday as site surveillance, in order to conform the work according to the job specification.
Initiate, manage and where appropriate undertake specific engineering studies to improve scope definition a nd
resolve technical issues.
Supervise/Manage and monitoring the performance ofcontractors in related with the work activities for off/on
shore Maintenance jobs.
Familiaritywith licensor FEED package such as Design basis,PFD,P&ID, MSD, material balance,reliefvalve
load summary,utility summary,PDS for all static & rotary equipments,instrumentdatasheets,equipmentlayout
and pump hydraulic calculations etc.
5. Curriculum Vitae of Commissioning and Maintenance Engineer Page 5 of 6 European Union Date: 11.10.2015
Process design calculation such as pump performance /line sizing / vessel sizing / control valve sizing & safety
valve sizing and tank venting system calculations as per API, ASME and ANSI standards.
SOP preparation for commissioning,pre-commissioning and normal start-up.
Pre commissioning activities like hydro testing / flushing / purging /acid pickling;
Supervise the day-to-day Maintenance operations,ensure thatwork process es are implemented as designed
and comply with established standards and procedures,employees are motivated,understand whatis
expected of them and perform according to the designated standards.
Accountable for maintenance planning to include the look ahead maintenance jobs and collecting data for
future shutdowns.
Prepared Method Statementand Job Hazard Analyzed.
Supervised maintenance staffby determining workloads and schedules;developed,interpreted and
implemented policies and procedures.
Review the construction work according to PI&D and approved construction drawings,solving and follow up
punch listitems until are closed.
Supervise mechanical completion stage for manufacture,installation and repair ofstatic and rotating
equipments,storage tanks,spheres,piping and structures.
Identifying and providing potential solutions to engineering problems thatarise during the construction phase
and could affect the security, availability, reliabilityand starting date of the facilities.
Coordinate the planning,execution,control and budgetmanagementto perform the preventive predictive,
corrective mechanical activities.
Assure Work Permit& Job Hazard Analysis is detailed per job.
Short description of
equipment on Columns, heat exchangers, pressure vessels, tanks, pipelines/trunk lines and Deluge Systems.
Date (from– to) Aug. 2008 - Dec. 2010
Name of company MAN FIA GmbH Oil Gas Libyan Branch
Type of business or sector Mechanical Maintenance and Turnaround Engineering
Occupation or position held Site Manager
Main activities and
responsibilities
Conceptualizing & designing plantpiping based customer’s drawings & reading piping isometrics in accordance
with DIN, API, ASME, ASTM, AWS Standards.
Elaborate maintenance plans for shutdown.
Preparation Work Pack documentetion for Maintenance and Turnaround.
Preparation Spare Parts listfor equipments.
Responsible for Solomon Program for Maintenance KPIs;Elaborate RCA, RCFA; Calculate MCI (Maintenance
CostIndex).
Supervise Refinery investmentproject;calculate the Mechanical Availability, member in the commissioning
team.
Carry-out Conceptdefinition and engineering studies,scopes,design and preparation ofengineering
documents as per approved standards and procedures.
Responsible for site teams and contractors working on an integrated basis.
Modifications to pipeline systems,operations and maintenance for mechanical works.
Finalizing requirements & specifications in consultation with the clients for executing various pipelines (API-
Standard 1104 and API-Specification 6D), maintenance and drilling projects.
Engineer responsible for site mechanical,piping and equipmentinstallation teams (ASME Code B31.3, API-
Specification 598,API-Specification 6FA, ANSI-Standard B16.5).
Fabrication installation and commissioning ofProcess piping associated (API, ASME Code B31.3, AWS D1.1,
ASME Section V, ASME IX, NOC Libya), with reporting directly to Construction Manager.
Participating in projectreview meetings for evaluating projects progress.
Prepare layouts for the projectas per the process and material flow,needs follow up the ASME-Section II and
API Standards.
Executing specific engineering activities during proposal processing and projectexecution (including site
phase) and drawing up the respective documents.
Scheduling and organizing specialistprojectexecution.
Creating a positive client’s reference by executing a projectcompetentlyand professionally.
Reconciling technical projectsolutions with the stipulations ofthe technical department/specialistgroup.
Short description of
equipment on Columns, heat exchangers, pressure vessels, tanks, pipelines/trunk lines and Deluge Systems.
Date (from– to) Jul. 2007- Jul. 2008
Name of company QATAR-GAS QCS.
Type of business or sector Pre-Commissioning Engineering
Occupation or position held Site Engineer
Main activities and
responsibilities
Responsablefor pre-commissioning activities such as water flushing,air blowing and steam blowing,tightness
test, service test, lube oil flushing,drying,inspection ofvessels,columns,purging,inerting,mechanical running
& initial start-up of pumps and equipment.Preparation ofpre-commissioning procedures,punch listing and its
closeout,as-builtdocumentation for system completion as per API, ASME, ASTM Standards and Company
procedures.
Planning, Execution, Control and Supervision of all activities like Pneumatic testing,Hydro testing,Watering,
6. Curriculum Vitae of Commissioning and Maintenance Engineer Page 6 of 6 European Union Date: 11.10.2015
Dewatering, pressurizing, Depressurizing etc of pipeline ofdifferent material like,SS, CS(Corrosion resistance
alloy lined/claded inside), carrying hydrocarbon at high pressure range,in compliance with Project
specification,International codes and ProjectHSE plan.
Attending/generating punch points as a part of mechanical completion activities. Confirm there are no category
A punch listitems.
Monitor work permitissuances and check strictimplementation ofall safety requirements during testing & pre-
commissioning works.
Review of Hydrotest Package and check the limitof test pack.
Confirm all valves are setto the pre test position shown in the system P&ID limits.
Prepaire abd Check all necessaryblinds have been installed as per isolation plan.Confirm all spectacle blinds
and temporary commissioning spades are in the pre testposition shown in the system P&ID limits.
Reinstall package and submitto pre-commissioning and commissioning activities.
Identify restrains on the progress ofpre-commissioning work in order to provide timely resolution and/or to
minimize disruption.
Review mechanical completion packages. Prepare pre-commissioning and commissioning schedules as per
system priority based on commissioning matrix.
Preparation of pre-commissioning procedures like air blowing,water flushing, etc,and carried out the same
activities on field.
Perform the lube oil flushing of cooling water pumps, boiler feed water pump,boiler fuel gas recirculation fan,
gas turbine,bog booster compressors, air compressor,oxidation compressors, compressor and nitrogen make
up compressor.
Perform catalyst loading for the vessels with complete safetyprecautions and safe practices,level to level
inspection for ceramic balls,catalystand final box up with vendor and client.
Perform early punch listing on equipment and associated pipelines prior to pre-commissioning ofeach system
to affect minimal rework later in the project like pre-hydro punching.
Supervise the proper installation ofall missing plantitems as reflected on punch lists.
Review projectspecifications,plans,isometric drawings and materials take-off.
Prior to start of works,to check the Suppliers material and technical documentation deliveryschedule (ASME-
Sec II).
Cooperate with the projectteam for the Constructabilityand Feasibilitystudies,with APPAL, for technical
duration of the vendors proposals and clarifications meeting with the binders,with piping departmentto analyse
(define) the WR to be included in the Scope of Work.
Short description of
equipment on Columns, heat exchangers, pressure vessels, tanks, pipelines/trunk lines and Deluge Systems.
Date (from– to) May 2006 - Apr 2007
Name of company BONATTI S.p.A. Kazakhstan
Type of business or sector Engineering Construction KASHAGAN Atyrau
Occupation or position held Piping & Welding Supervisor
Main activities and
responsibilities
Supervise the erection and welding activities,the control and implementation Standards ASTM, ASME Code
B31.3 (for piping) and ASME IX (for welding GTAW+ SMAW horizontal and vertical welding position for
welders (Up-hill and Down-hill).
Having the responsibilityof all Technical Query regarding piping works.
As-builtdesign and proposal ofmodification.
Material take-off and piping schedule.
Shop fabrication as per AGIP KCO Procedure.
Erection and Installation as per AGIP KCO Procedure.
Tie-in preparation and scheduling.
Lifting plan preparation as per AGIP KCO Procedure.
Test package preparation as per AGIP KCO Procedure;
Piping jobs:erection,reinstatement,alignmentas per the drawings,procedures and specifications (ANSI-
Standard B16.5, ASME-Section II and ASME Code B31.3).
Supervision ofinstallation underground pipes GRVand GRE (all diameters) related in Cooling Water System.
Supervision oflamination and cementworks for RTR piping.
Supervise the preparation on testing,of pipes in the field (ASME-Section II, ASTM-Standard E194, ANSI-
Standard B16.5).
Issuing of “AS BUILD” documentation for piping system with contractors Technical QualityControl Department
Support.
Short description of
equipment on Columns, heat exchangers, pressure vessels, tanks, pipelines/trunk lines and Deluge Systems.
Date (from– to) Oct 2002 - May 2006
Name of company Nuclear Power Plant Cernavoda (CANDU & Ansaldo Project) U1/ U2
Type of business or sector Construction / Commissioning Execution- Maintenance Engineering
Occupation or position held Mechanical Engineer
Main activities and
responsibilities
Check and establish in close collaboration with engineering pressure testboundaryfor systems or parts of the
systems which are aboutto be tested, and make sure that there is no work left to be done after the pressure
test.
Review projectspecifications,plans,isometric drawings and materials take-off(ASTM-Standard E142, ASTM-
7. Curriculum Vitae of Commissioning and Maintenance Engineer Page 7 of 6 European Union Date: 11.10.2015
Standard AL93, and ASTM-Standard E94).
Issuing ofwork packages (mechanical parts) for all critical Driers and critical Valves the Nuclear Power Plant
System.
Carry-out Conceptdefinition and engineering studies,scopes,design and preparation ofengineering
documents as per approved standards and procedures.
Witness and monitor Pre-Commissioning,Commissioning and Maintenance activities and ensure their right
delivery in accordance to the agreed standards.
Responsible to assure thatall checks and tests are performed successfully.
Monitors punch items in order to bring the subsystem to the completion stage.
Short description of
equipment Columns, heat exchangers, pressure vessels, reactors and pipe rack.
SOCIAL SKILLS AND COMPETENCES
Communicative, Good learning and assimilation, Highly regarded for a positive attitude and an ability to provide ideas and
solutions, Goal oriented and hardworking individual determined to succeed, Ability to work any time of year, in hot or cold areas,
offshore and/or onshore, Ability to gather, extract and use data efficacy.