HVAC DESIGN ENGINEER WITH MORE THAN 2 YEARS OF PROFFESIONAL EXPERIENCE.

1. Syed Javed Hazari
Mobile no : +966537841217 (Saudi Arabia)
+919989951040 (India)
Email Id : engrjaved09@gmail.com
SHazari@pbc.com.sa
Skype ID : javed.hazari21
CARRIER OBJECTIVE:
Candidate with thorough knowledge about principles of HVAC Design, engineering specifications and safety systems,
seeks to work as a HVAC Design engineering for a reputed organization.
EDUCATIONAL QUALIFICATION
02/2013 – 08/2013 Diploma in Heating, Ventilation and Air-conditioning (Design and Drafting) from TAIBA
Engineering HVAC consultancy and Project Management, Mehdipatnam, Hyderabad
07/2008 – 12/2013 Bachelor of Engineering in Mechanical (Production) Engineering from Osmania University,
Hyderabad, India
07/2006 – 06/2008 Intermediate Public Examination (Class XI and XII) from Sri Chaitanya Junior College,
Hyderabad, India
07/1994 – 06/2006 Secondary School Certificate (Class X) from St Mary’s High School, Secunderabad, India
PROJECT WORK
Designed project work of HVAC for Ground +Typical Floors Residential Building during Training of HVAC Design:
• Design & Drawing of all types of Split A/C and preparation of Duct layout with Supply & Return Diffusers, Duct
Grill, Slot Diffusers with flexible connections for G+10 Typical Floors Building.
• Cooling Load calculation by manual method with E-20 Form, CFM calculation & Air Distribution to various
branches of duct.
• Duct Size Calculation by Duct Sizing method / Equal Friction Method, Calculation of No. of G.I. Sheet & Gauge
required, Selection of SAD / RAD (2-way, 3-way, 4-way), SAG/RAG, Slot Diffuser
• Selection of FCU with reference to TR required in particular Rooms/Halls.
• Static Pressure Calculation for Selection AHU.
• GPM calculations and Distribution of Chilled water to various FCU & AHU through chilled Water Supply & Return
Pipe.
• Calculation of Chilled Water Supply & Return Pipe Diameter & Pipe friction losses through standard Physical &
Performance Data through Catalog. Also selection of Stand by Chiller based on TR for future purpose.
• Pump Head Calculations for the selection of chiller pumps by considering complete chilled water supply & Friction
Chart for Closed Piping Systems.
• Selection of Chillers through Catalog of CARRIER & TRANE on the basis of TR capacity required for completed
G+10 floors, and Leaving Chilled water Temp. & condenser Entering Air Temp. Also selection of return pipe
length and all the fitting equivalent length (Bend, Tees, Reducer, DRV, NRV, Strainer, F.C, I.V etc.), also selection
of stand by pumps

2. TECHNICAL SOFTWARE
 AUTOCAD 2D/3D
 REVIT (ARCH/M.E.P)
 PRO-E
 CATIA V5
 ANSYS
 SOLID WORKS
 H.A.P
 MCQUAY DUCT SIZER
TECHNICAL EXPERTISE
 Heat Load Calculation - As per ASHRAE Standards.
 Equipment Selection - As per required Diversity Factor & Architectural Layout.
 Static Pressure Calculation.
 Duct Design with Equal friction Method & as per SMACNA standards.
 Costing & Estimation- Filling Tenders of Priced B.O.Q.
 Chillers Pipe Designing & Equipment Selection.
 Pump Head Calculation.
 Ventilation- Completed Design and selection of Extract-fans, Centrifugal Blowers, Axial flow fans, Duct in-line
fans, Fresh AHU etc.
PROFFESIONAL EXPERIENCE
1.PROJECT BUILD COMPANY Ltd.
Country – Saudi Arabia
Duration - November-2014-Present
Position - Design Engineer (Mechanical)
Roles and Responsibilities:

3.  Developing sustainable building services designs on numerous major projects including commercial, residential,
tall tower, Infrastructure and mixed-use developments.
 Knowledge of ventilation and air conditioning systems and a successful track record of delivering detailed
designs to the highest international standards.
 Performing engineering evaluations, feasibility studies, conceptual and final design, cost estimates, and
engineering calculations.
 Researching, planning, designing and developing sustainable mechanical systems, including but not limited to
HVAC, plumbing and gas distribution systems.
 Preparation of mechanical engineering calculations in support of systems design.
 Evaluating statistical data, customer design proposals, specifications and manuals to determine feasibility of
design or application.
 Evaluating design drawings and calculations for HVAC, plumbing components, piping and mechanical systems to
satisfy target requirements throughout the design process and contribute to content and direction.
 Working knowledge of various building services design codes such as British Standards, ASHRAE, NFPA, IPC,
IMC and other International design, Interfacing and working with clients in a professional manner to achieve
project goals.
PROJECT EXPERIENCE IN PROJECT BUILD COMPANY LTD.
1. PROJECT NAME – AL-AZIZIA HOTEL
LOCATION- AL-KHOBAR
DESIGNATION – HVAC DESIGN ENGINEER
JOB DESCRIPTION:
 Responsible for calculating project cost as well as conduct performance assessments of HVAC systems.
 Handle responsibilities of verifying the working of the control system as per the set standards.
 Responsible for reviewing the HVAC documents to ensure compliance with commissioning standards and
specification.
 Collaborate closely with the other Departments, Submitting the drawings once the approval process is
complete
 Identify potential project risks and propose appropriate solutions where possible.
 Analyze design engineering output to ensure compliance with project requirements and design standard.
 Take on board all customer feedback and react promptly with design improvements.

4.  Implemented design changes that underwent evaluation for cost and efficiency.
 Handle responsibilities of developing the design concepts of HVAC systems and perform analysis of the
same
2. PROJECT NAME – PRINCE SULTAN HOTEL
LOCATION- AL-KHOBAR
DESIGNATION – HVAC DESIGN ENGINEER
JOB DESCRIPTION:
 Responsible for calculating project cost as well as conduct performance assessments of HVAC systems.
 Handle responsibilities of verifying the working of the control system as per the set standards.
 Responsible for reviewing the HVAC documents to ensure compliance with commissioning standards and
specification.
 Collaborate closely with the other Departments, Submitting the drawings once the approval process is
complete
 Identify potential project risks and propose appropriate solutions where possible.
 Analyze design engineering output to ensure compliance with project requirements and design standard.
 Take on board all customer feedback and react promptly with design improvements.
 Implemented design changes that underwent evaluation for cost and efficiency.
 Handle responsibilities of developing the design concepts of HVAC systems and perform analysis of the
same.
3. PROJECT NAME – SAUDI FOOD LABORATORY
LOCATION- DAMMAM
DESIGNATION – HVAC SITE ENGINEER
JOB DESCRIPTION:
 Designing of HVAC systems for the Project.
 Performing Heat Load calculation using HAP.
 Dealing with the Consultants and Clients.
 Resolving the issues arises in the selected items.

5.  Submitting the Shop Drawings for the Approval through consultant.
 Understanding the needs of the Consultant and giving the best service.
 Review Project Specifications, Tender Drawings, Material & Drawing Submittals.
 Responsible for meeting contract requirements in terms of scope, performance, quality and safety
related to MEP.
4. PROJECT NAME – FIBER GLASS PROJECT
LOCATION- YANBU
DESIGNATION – HVAC DESIGN ENGINEER
JOB DESCRIPTION:
 Responsible for calculating project cost as well as conduct performance assessments of HVAC systems.
 Handle responsibilities of verifying the working of the control system as per the set standards.
 Responsible for reviewing the HVAC documents to ensure compliance with commissioning standards and
specification.
 Collaborate closely with the other Departments, Submitting the drawings once the approval process is
complete
 Identify potential project risks and propose appropriate solutions where possible.
 Analyze design engineering output to ensure compliance with project requirements and design standard.
 Take on board all customer feedback and react promptly with design improvements.
 Implemented design changes that underwent evaluation for cost and efficiency.
 Handle responsibilities of developing the design concepts of HVAC systems and perform analysis of the
same
5. PROJECT NAME – SALEEM TOWER
LOCATION- RIYADH
DESIGNATION – HVAC DESIGN ENGINEER
JOB DESCRIPTION:
 Responsible for calculating project cost as well as conduct performance assessments of HVAC systems.
 Handle responsibilities of verifying the working of the control system as per the set standards.

6.  Responsible for reviewing the HVAC documents to ensure compliance with commissioning standards and
specification.
 Collaborate closely with the other Departments, Submitting the drawings once the approval process is
complete
 Identify potential project risks and propose appropriate solutions where possible.
 Analyze design engineering output to ensure compliance with project requirements and design standard.
 Take on board all customer feedback and react promptly with design improvements.
 Implemented design changes that underwent evaluation for cost and efficiency.
6. PROJECT NAME – WARE HOUSE
LOCATION- DAMMAM
DESIGNATION – HVAC DESIGN ENGINEER
JOB DESCRIPTION:
 Responsible for calculating project cost as well as conduct performance assessments of HVAC systems.
 Handle responsibilities of verifying the working of the control system as per the set standards.
 Responsible for reviewing the HVAC documents to ensure compliance with commissioning standards and
specification.
 Collaborate closely with the other Departments, Submitting the drawings once the approval process is
complete
 Identify potential project risks and propose appropriate solutions where possible.
 Analyze design engineering output to ensure compliance with project requirements and design standard.
 Take on board all customer feedback and react promptly with design improvements.
 Implemented design changes that underwent evaluation for cost and efficiency.
7. PROJECT NAME – AL-SULAIM
LOCATION- RIYADH
DESIGNATION – HVAC DESIGN ENGINEER
JOB DESCRIPTION:
 Responsible for calculating project cost as well as conduct performance assessments of HVAC systems.
 Handle responsibilities of verifying the working of the control system as per the set standards.

7.  Responsible for reviewing the HVAC documents to ensure compliance with commissioning standards and
specification.
 Collaborate closely with the other Departments, Submitting the drawings once the approval process is
complete
 Identify potential project risks and propose appropriate solutions where possible.
 Analyze design engineering output to ensure compliance with project requirements and design standard.
 Take on board all customer feedback and react promptly with design improvements.
 Implemented design changes that underwent evaluation for cost and efficiency.
8. PROJECT NAME – ROYAL COMMISION 097-C74
LOCATION- JUBAIL
DESIGNATION – HVAC COST & ESTIMATION ENGINEER
JOB DESCRIPTION:
 Estimate commercial bids and bid documents which would best serve the interests of the company.
 Prepare detailed breakup reports for an estimation of a project evaluated and reviewed by me earlier on.
 Keep a check on the project, as it is undertaken to ensure that the set estimate for it is not being overshot.
 Coordinate with the accounts department in order to help prepare the billing reports per project.
 Compilation of the sum of various indirect costs incurred by the project, including the costs of any and
every subcontractors involved in the execution of the assignment.
9. PROJECT NAME – SABIC HOUSING PROJECT
LOCATION- JUBAIL
DESIGNATION – HVAC COST & ESTIMATION ENGINEER
JOB DESCRIPTION:
 Estimate commercial bids and bid documents which would best serve the interests of the company.
 Prepare detailed breakup reports for an estimation of a project evaluated and reviewed by me earlier on.
 Keep a check on the project, as it is undertaken to ensure that the set estimate for it is not being overshot.
 Coordinate with the accounts department in order to help prepare the billing reports per project.
 Compilation of the sum of various indirect costs incurred by the project, including the costs of any and
every subcontractors involved in the execution of the assignment.
10. PROJECT NAME – MOWASAT HOSPITAL
LOCATION- AL-KHOBAR

8. DESIGNATION – HVAC COST & ESTIMATION ENGINEER
JOB DESCRIPTION:
 Estimate commercial bids and bid documents which would best serve the interests of the company.
 Prepare detailed breakup reports for an estimation of a project evaluated and reviewed by me earlier on.
 Keep a check on the project, as it is undertaken to ensure that the set estimate for it is not being overshot.
 Coordinate with the accounts department in order to help prepare the billing reports per project.
 Compilation of the sum of various indirect costs incurred by the project, including the costs of any and
every subcontractors involved in the execution of the assignment.
EXPERIENCE IN INDIA
2. SRI HARSHA CONSTRUCTIONS
Country – INDIA
Duration - November-2013-November2014
Position - Junior Design Engineer (Mechanical)
1. PROJECT NAME – Air conditioning & Ventilation for Kondapur Towers
LOCATION- INDIA
DESIGNATION – JR. HVAC DESIGN ENGINEER
JOB DESCRIPTION:
 Detailed design engineering of HVAC system which involves, heat load
 calculations, duct and pipe routing, drawing & specifications.
 Well versed with ventilation standards and worked on natural ventilation
 system for basement car park areas.
 Report on analysis of various design options for natural ventilation system.
 for 3-level basement car park with area of 54000 m2.
 Performed value engineering analysis for optimum design.
 Design calculations for air conditioning and ventilation system.
 Coordinated in all aspects of project with architectural, structural,
 Electrical & plumbing services.
 Mentoring CAD team for error free delivery of drawings.
 Technical meetings with contractors in resolving technical issues.

9. ADDITIONAL INTERESTS
 Member of Entrepreneurship Cell (M.J.C.E.T).
 Member of Society of Automotive Engineers
PERSONAL INFORMATION
• Date of birth : 09/11/1990
• Gender : Male
• Nationality : Indian
• Marital Status : Single
• Health Status : Excellent
• Religion : Islam
• Languages Known : English, Hindi, Urdu, Telugu
• Passport Number : K8592676
DATE
PLACE: SYED JAVED HAZARI.

10. ADDITIONAL INTERESTS
 Member of Entrepreneurship Cell (M.J.C.E.T).
 Member of Society of Automotive Engineers
PERSONAL INFORMATION
• Date of birth : 09/11/1990
• Gender : Male
• Nationality : Indian
• Marital Status : Single
• Health Status : Excellent
• Religion : Islam
• Languages Known : English, Hindi, Urdu, Telugu
• Passport Number : K8592676
DATE
PLACE: SYED JAVED HAZARI.