This document provides the schedule and program details for the 2011 Sustainable Disaster Relief Housing Conference held in Ottawa, Canada. The two-day conference included sessions on defining needs, identifying solutions, and refining responses to disasters. Speakers represented organizations involved in disaster relief and discussed topics such as rebuilding challenges, transitional shelter solutions, innovative wood structures, and building codes. Panelists shared experiences from recent events such as earthquakes in Haiti, Japan, and Chile. The program aimed to arrive at timely and affordable sustainable solutions for disaster housing.
Second CELLUWOOD Newsletter (published in September 2014)
CELLUWOOD was a 4 years EU project, funded under the Eco Innovation research initiative. The project aims to develop a new range of structural elements made of wood by introducing innovative production elements and includes the use of cellulose instead of petroleum-based glue in the lamination of the timber products. The ‘physical’ results will be the strong eco-beams and columns and their most sustainable manufacturing technologies, in addition to significant environmental and cost benefits of the innovation. These are achieved by the introduction of the (new) technologies from other sectors (e.g. cellulose velvet, biocomposite reinforcement and bio-resin) for innovative uses in the defect removal and repairing, facilitating innovation in the use of nano/micro cellulose and bio-resin technologies in timber reengineering, and the development, testing and demonstration of the novel initiative products.
Coordinator and responsible of the project at AIDIMA: Miguel Ángel Abián
In the case of AIDIMA, this project is co-funded by IVACE (Instituto Valenciano de Competitividad Empresarial) and by the European Regional Development Fund (ERDF).
Second CELLUWOOD Newsletter (published in September 2014)
CELLUWOOD was a 4 years EU project, funded under the Eco Innovation research initiative. The project aims to develop a new range of structural elements made of wood by introducing innovative production elements and includes the use of cellulose instead of petroleum-based glue in the lamination of the timber products. The ‘physical’ results will be the strong eco-beams and columns and their most sustainable manufacturing technologies, in addition to significant environmental and cost benefits of the innovation. These are achieved by the introduction of the (new) technologies from other sectors (e.g. cellulose velvet, biocomposite reinforcement and bio-resin) for innovative uses in the defect removal and repairing, facilitating innovation in the use of nano/micro cellulose and bio-resin technologies in timber reengineering, and the development, testing and demonstration of the novel initiative products.
Coordinator and responsible of the project at AIDIMA: Miguel Ángel Abián
In the case of AIDIMA, this project is co-funded by IVACE (Instituto Valenciano de Competitividad Empresarial) and by the European Regional Development Fund (ERDF).
Presentation of CELLUWOOD Project at Fair HABITAT 2014torrubia
Presentation of the preliminary results from EU Project CELLUWOOD at the International Trade Fair HABITAT (Spain, 11th-14th February 2014).
Coordinator and responsible of the project: Miguel Ángel Abián
The EU Project CELLUWOOD is co-funded by the CIP Eco-innovation First Application and Market Replication Projects Initiative. Through the Eco-innovation funding scheme, the EU wants to support innovative products, services and technologies that can make a better use of our natural resources and reduce Europe’s ecological footprint.
The project has developed non-petrochemical adhesives (bio-resins) for improving the mechanical strength of laminated timber, so it can be used in large structures for buildings. This will encourage the use of renewable materials and avoid the use of adhesives petrochemicals. Furthermore, these bio-resins are being used to repair the wood defects such as cracks and knots, which improves the material utilization.
This project is co-funded by IVACE (Instituto Valenciano de Competitividad Empresarial) and by the European Regional Development Fund (ERDF).
The Maya civilization was a Mesoamerican civilization.
Maya civilization Is well known for its art, architecture, mathematics, calendar, and astronomical system.
PAINTINGS OF EXTERIOR AND INTERIOR SURFACESjagrutib22
PAINTINGS OF EXTERIOR AND INTERIOR SURFACES - principal types of coating, Paints - function, purpose, properties, classification, components of paints, different types of paints, why do we need different types of paints, manufacturing procedure, surface preparation for exterior and interior surfaces, defects in paints, cost and everything about paints.
Applications of Engineered Bamboo as a Construction Material - delivered by Prof. Dongsheng Huang at the International Training Workshop on Sustainable Industrialization and Commercialization of NTFPs.
Defining loading criteria for proof loading Eva Lantsoght
As the bridge stock in The Netherlands and Europe is ageing, various methods to analyse existing bridges are being studied. Proof loading of bridges is an option to study the capacity when crucial information about the structure is lacking. This information could be related to the material (for example, the effect of alkali-silica reaction on the structural capacity) as well as to the structural system (for example, the effect of restraints at the supports or transverse redistribution capacity). When it is decided to proof load a bridge, the question arises which maximum load should be attained during the experiment to approve the capacity of the bridge, and which criteria, based on the measurements during the test, would indicate that the proof loading needs to be aborted before reaching the maximum desired load (the so-called stop criteria). To define the required loading criteria, a review of the literature has been made, finite element models of existing viaducts have been made, and on these viaducts, proof loading tests have been carried out. These bridges were heavily instrumented, with a goal of learning as much as possible about the structural behaviour during proof loading. As a result of the analysis and experiments, recommendations are given for proof loading of bridges with respect to the required maximum load and the stop criteria.
These recommendations are important, since they form the basis of a guideline for proof loading of existing concrete bridges that is under development in The Netherlands.
Presentation of CELLUWOOD Project at Fair HABITAT 2014torrubia
Presentation of the preliminary results from EU Project CELLUWOOD at the International Trade Fair HABITAT (Spain, 11th-14th February 2014).
Coordinator and responsible of the project: Miguel Ángel Abián
The EU Project CELLUWOOD is co-funded by the CIP Eco-innovation First Application and Market Replication Projects Initiative. Through the Eco-innovation funding scheme, the EU wants to support innovative products, services and technologies that can make a better use of our natural resources and reduce Europe’s ecological footprint.
The project has developed non-petrochemical adhesives (bio-resins) for improving the mechanical strength of laminated timber, so it can be used in large structures for buildings. This will encourage the use of renewable materials and avoid the use of adhesives petrochemicals. Furthermore, these bio-resins are being used to repair the wood defects such as cracks and knots, which improves the material utilization.
This project is co-funded by IVACE (Instituto Valenciano de Competitividad Empresarial) and by the European Regional Development Fund (ERDF).
The Maya civilization was a Mesoamerican civilization.
Maya civilization Is well known for its art, architecture, mathematics, calendar, and astronomical system.
PAINTINGS OF EXTERIOR AND INTERIOR SURFACESjagrutib22
PAINTINGS OF EXTERIOR AND INTERIOR SURFACES - principal types of coating, Paints - function, purpose, properties, classification, components of paints, different types of paints, why do we need different types of paints, manufacturing procedure, surface preparation for exterior and interior surfaces, defects in paints, cost and everything about paints.
Applications of Engineered Bamboo as a Construction Material - delivered by Prof. Dongsheng Huang at the International Training Workshop on Sustainable Industrialization and Commercialization of NTFPs.
Defining loading criteria for proof loading Eva Lantsoght
As the bridge stock in The Netherlands and Europe is ageing, various methods to analyse existing bridges are being studied. Proof loading of bridges is an option to study the capacity when crucial information about the structure is lacking. This information could be related to the material (for example, the effect of alkali-silica reaction on the structural capacity) as well as to the structural system (for example, the effect of restraints at the supports or transverse redistribution capacity). When it is decided to proof load a bridge, the question arises which maximum load should be attained during the experiment to approve the capacity of the bridge, and which criteria, based on the measurements during the test, would indicate that the proof loading needs to be aborted before reaching the maximum desired load (the so-called stop criteria). To define the required loading criteria, a review of the literature has been made, finite element models of existing viaducts have been made, and on these viaducts, proof loading tests have been carried out. These bridges were heavily instrumented, with a goal of learning as much as possible about the structural behaviour during proof loading. As a result of the analysis and experiments, recommendations are given for proof loading of bridges with respect to the required maximum load and the stop criteria.
These recommendations are important, since they form the basis of a guideline for proof loading of existing concrete bridges that is under development in The Netherlands.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
SAP Sapphire 2024 - ASUG301 building better apps with SAP Fiori.pdfPeter Spielvogel
Building better applications for business users with SAP Fiori.
• What is SAP Fiori and why it matters to you
• How a better user experience drives measurable business benefits
• How to get started with SAP Fiori today
• How SAP Fiori elements accelerates application development
• How SAP Build Code includes SAP Fiori tools and other generative artificial intelligence capabilities
• How SAP Fiori paves the way for using AI in SAP apps
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...Neo4j
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
1. CONFERENCE PROGRAM
Your guide to sustainable disaster relief housing
Held at the National Arts Centre, Ottawa, Ontario
www.sustainablereliefhousing.org
2. SCHEDULE AT A GLANCE
7:30 am BREAKFAST PANORAMA ROOM
THURSDAY, OCTOBER 27
8:00
SESSION 1 - DEFINING THE NEED
Patrice Tardif, FPS - President-Elect
CONFERENCE COMMENCES PANORAMA ROOM
Welcome and Introduction
EXHIBITION HALL OPENS MEZZANINE
8:05 Jim Dangerfield, FPInnovations
Keynote: Disaster Relief - Exploring the Rebuilding Challenge
9:00 Serge Koskinen, CIDA
The Role of the Canadian International Development Agency
9:30 COFFEE BREAK EXHIBITION HALL
10:00 Minister Yawata, Japanese Embassy
Pursuing Recovery Following the 2011 Earthquake and Tsunami
10:30 Speaker to be announced
2011 Chilean Earthquake Response Strategies
11:00 Speaker to be announced, Foreign Affairs and International Trade Canada
Overall Coordination of Canadian Response Post Disaster
11:30 QUESTION PERIOD
noon LUNCH EXHIBITION HALL
1:00 pm Alain Plouffe, SOCODEVI
Requirements Prior to Rebuilding Efforts
1:30 Avi Friedman, McGill School of Architecture
CONFERENCE SESSIONS PANORAMA ROOM
SESSION 2 - IDENTIFYING
Innovative, Low-Cost, Pre-Fab Wood Structures
2:00 Martin Rodrigue, MaisonsLaprise
Shelter Solutions in Haiti
SOLUTIONS
2:30 COFFEE BREAK EXHIBITION HALL Welcome to Ottawa, Canada
3:00 Jeff Armstrong, Kott Lumber/DAC Draped in natural splendor and
Panelized Solutions for Cold-Climate Housing
brimming with a relaxed urban vibe,
3:30 Helen Griffin, Canadian Wood Council Ottawa is a truly unique destination
Building Codes, How They Can Help
offering visitors a wealth of experiences
4:00 Paul Morris, FPInnovations
Preservative Treatment & Design Specifications for Disaster Relief Housing
they won’t find anywhere else,
including Ontario’s only UNESCO
4:30 Sarah Shima, Canadian Co-Operators Association of Canada
The Role of Credit Unions in Post Disaster Rebuilding World Heritage Site, The Rideau Canal.
5:00
As Canada’s capital and Ontario’s
RECEPTION EXHIBITION HALL
second largest city, Ottawa is a
7:00 Terry Robinson, Canada Mortgage and Housing Corporation
showcase of national sites, monuments
BREAKOUT
Training as an Essential Element of Reconstruction
SESSIONS
and symbols where visitors can
7:20 Pat Donahue, University of Minesota
Plug and Play Housing experience the best of our country, all
7:40 Graham, Savage, Business New Brunswick in one place. Ottawa is alive in culture,
Manufactured Housing Capabilities in New Brunswick home to the country’s most impressive
line-up of national museums,
7:30 BREAKFAST PANORAMA ROOM outstanding performing arts groups
and venues, and a year-round calendar
8:00 Judy Plante, Facilitator
FRIDAY, OCTOBER 28
Review of Sessions 1 & 2, Introduction of Working Plenary Sessions of festivals and events.
SESSION 3 - REFINING THE RESPONSE
8:15 William Lawton, U.S. Department of Commerce - US Southcom
Keynote: Initial Stages of Structure & Methodology for Public/Private
CONFERENCE SESSIONS PANORAMA ROOM
Cooperation in Disaster Relief & Humanitarian Assistance Programs
Expert Panel: CIDA, USAID, US Dept. of Comm.
9:15 Charles Setchell, USAID/OFDA
Keynote: Prefabricated Shelters: Points to Consider
10:15 COFFEE BREAK EXHIBITION HALL
10:30 Tim Reinhold, Insurance Institute for Business & Home Safety
Keynote: Rebuilding after Disasters: A Loss Mitigation
Perspective
Expert Panel: SOCODEVI, Desjardins
11:30 Judy Plante, Facilitator Conference organized by
Review of Session 3
11:45 Michael Green, mgb ARCHITECTURE + DESIGN Forest Products Society
Closing keynote: Post-Disaster Solutions - Housing and
Beyond, New Building Approaches in Wood
International Office and
FPS Eastern Canadian Section
1
2011 Sustainable Disaster Relief Housing Conference
3. PROGRAM DETAILS
THURSDAY, OCTOBER 27
7:30 BREAKFAST - PANORAMA ROOM
Morning Session 1: DEFINING THE NEED í PANORAMA ROOM
This session will open with a keynote speaker to introduce the topic followed by a panel of four experts dealing with the needs
resulting from various climatic, geographical and political realities. Experiences following several recent catastrophic events will
be presented.
8:00 Patrice Tardif, FPS - President-Elect
Welcome and Introduction
8:05 Jim Dangerfield, FPInnovations
Keynote: Disaster Relief - Exploring the Rebuilding Challenge
Jim A. Dangerfield, Ph.D., retired from his position as Executive Vice President of FPInnovations in July 2011. FPInnovations is
Canada’s leading forest products research institute. It conducts research, provides technical services and carries out technology
transfers in the areas of wood harvesting, wood products, pulp and paper, nanotechnology, bioenergy generation and chemical
production. With a staff of approximately 500, it has research laboratories in Québec City, Montréal and Vancouver, and technology
transfer offices across Canada. Jim has played an important role in structuring the new organization. Prior to taking on his role
at FPInnovations, Jim served as Vice President, Forintek, and had a leadership role with Forintek in both Eastern and Western
Canada. He has worked extensively with industry in commercializing technology developed at Forintek. He also was responsible for
setting up the Athena Sustainable Materials Institute, as a spin-off from R&D initiated at Forintek on lifecycle analysis of buildings
and building products. He received a Ph.D. in Microbiology, a M.Sc. degree in Soil Genesis, a Bachelor of Science with a major in
Soil Science and a minor in Plant Science from the University of Alberta.
9:00 Serge Koskinen, CIDA
The Role of the Canadian International Development Agency
Originally trained as a lawyer, Serge Koskinen manages the Natural Disaster Response Unit in CIDA’s International Humanitarian
Assistance program. He has worked on all recent major disaster responses including the Indian Ocean Tsunami, the 2006 Pakistan
earthquake, the Sichuan earthquake and Cyclone Nargis in 2008 and the Haiti earthquake in 2010.
CIDA is the Government of Canada’s operational lead for international humanitarian assistance in response to natural disasters
and complex emergencies. Within CIDA, issues of humanitarian concern are addressed by the International Humanitarian
Assistance (IHA) Directorate. IHA is the Agency’s principal conduit for humanitarian assistance to developing countries, and is
mandated to help save lives and alleviate human suffering resulting from conflict and natural disasters in developing countries
by providing an appropriate, timely and effective response. IHA’s programming responds to humanitarian needs in all sectors,
including shelter. While the focus is generally on the provision of emergency shelter (tents, tarps, etc.), following catastrophic
events, such as the January 2010 Haiti earthquake, IHA may support transitional shelter construction through its implementing
partners in the UN, the Red Cross and Red Crescent movement and the NGO community.
9:30 COFFEE BREAK - EXHIBITION HALL
10:00 Minister Yawata, Japanese Embassy
Pursuing Recovery Following the 2011 Earthquake and Tsunami
Fumio Yawata is Minister and Deputy Head of Mission, Embassy of Japan in Canada. Prior to this assignment, Mr. Yawata served
as a Minister at the Embassy of Japan in Berlin, Germany. Yawata graduated from Kobe Foreign Language University.
The Minister will inform the conference attendees of the situation of Japan after the Earthquake and Tsunami on March 11 and
what challenges the government faced and how they are tackling the challenges to pursue the recovery. The Minister will also
describe what the Japanese government has done to supply temporary housing and also to repair the damaged houses.
Ottawa, Canada 2
4. 10:30 To be announced at the conference, Chilean Representative
2011 Chilean Earthquake Response Strategies
11:00 To be announced at the conference, Foreign Affairs and International Trade Canada (DFAIT)
Overall Coordination of Canadian Response Post Disaster
11:30 QUESTION PERIOD
NOON LUNCH - EXHIBITION HALL
Afternoon Session 2: IDENTIFYING SOLUTIONS í PANORAMA ROOM
This session will include a panel of seven experts who will address various topics dealing with the building systems available;
shipping, delivery and erection considerations; and the financing and coordination of relief efforts to arrive at timely and
affordable sustainable solutions.
1:00 Alain Plouffe, SOCODEVI
Requirements Prior to Rebuilding Efforts
Alain Plouffe, is Technical Director of the Society for International Cooperation and Development (SOCODEVI). Mr. Plouffe is an
engineer (University of Sherbrooke), he has a Masters in Business Management Cooperative (IRECUS-Université de Sherbrooke) and
a 2nd cycle degree in Project Management of Engineering and Urbanism project (Ecole Polytechnique de Montreal ) He has worked
in international cooperation since 1984. He has lived and worked in Latin America, the Caribbean, Africa and Asia where he held
various roles in simple and complex projects, in small and large projects, with private, bilateral and multilateral donors. SOCODEVI
and M. Plouffe’s expertise lies in their ability to support people and local authorities so they can organize and implement sustainable
solutions in food production and processing, forestry, financial services and housing.
In the aftermath of disasters, there are many emergencies. The large number of challenges and stakeholders makes the choices
of priorities difficult. It’s not easy to distinguish what should be done first to implement sustainable solutions. Many technical
options are available. It is often in the planning of the rebuilding programs that we meet the most complex problems.
1:30 Avi Friedman, McGill School of Architecture
Innovative, Low-Cost, Pre-Fab Wood Structures
Avi Friedman, Ph.D., Professor of Architecture at McGill University, founder of the Affordable Homes program at McGill: Dr.
Friedman is known nationally and internationally for his housing innovation and was selected by Wallpaper magazine in 2010 as
one of ten people worldwide who would “most likely change the way we live.” Among this practicing architect’s numerous awards are
the Manning Innovation Award and the United Nations World Habitat Award.
Dr. Friedman’s talk is entitled “Innovative, Low-Cost, Pre-Fab Wood Structures.” Developing concepts for wood-based,
prefabricated, lower-cost dwellings has been the focus of Avi Friedman’s work in the past two decades. In Canada, through the
development of the Grow and the Next Homes he demonstrated that mass customization is possible in the design of affordable
housing. In Mexico, he unveiled a prototype called La Casa a la Carta which accommodates local life style and economic needs.
These units can also be used as solutions in cases of disaster relief and will be illustrated in his presentation.
2:00 Martin Rodrigue, MaisonsLaprise
Shelter Solutions in Haiti
Mr. Martin Rodrigue’s career has always been driven by his interest in sciences, environment, people and cultures. He graduated
from University Laval in Quebec City after completing the Environment and Forestry Management Program. He also holds a
University degree in Anthropology from the same institution. Before he joined Laprise Mr. Rodrigue was in charge of large scale
operations with the timber industry, working for the private sector and with different First Nation governments. He also managed
several projects as a consultant, implementing Sustainable Forestry Management Systems for some of Canada’s largest timber
product manufacturers and auditing Quality and Environmental Management Systems for some well established groups such as
Hydro Quebec. In the past Mr. Rodrigue also contributed to the development of the tourism industry in different regions of the
3 2011 Sustainable Disaster Relief Housing Conference
5. province. Mr. Rodrigue joined Laprise in the spring of 2008 to develop sales with Habitaflex. His understanding of the structural
properties of timber, his large network of contacts, his sales experience along with his background in the tourism industry, are great
assets for the company. His international experience enables him to work in French, English and Spanish. Moreover his easy going
personality and his capacities soon convinced Laprise to extend his mandate to the other divisions. So far, Mr. Rodrigue has secured
distributorships and exports in different regions of North and South America, The Caribbean, Europe, Africa and Australia.
Laprise Homes, a leading manufacturer of prefabricated homes since 1989 and part of Canada’s 50 Best Managed Companies has
just completed the delivery of nearly 7000 transitional shelters to the Canadian Red Cross Society, as part of its program aiming
to provide lodging to the many people left homeless in Haiti by the January 12th 2010 earthquake. This presentation will outline
the main steps of this ambitious project as experienced by a manufacturing company, from the tender documents to the delivery
of shelters, all while meeting the great challenge of identifying solutions that will fulfill the needs of the end users.
2:30 COFFEE BREAK - EXHIBITION HALL
3:00 Jeff Armstrong, Kott Lumber/DAC
Panelized Solutions for Cold-Climate Housing
Jeffery Armstrong, a trained architect and founder of DAC International: Mr. Armstrong’s experience is in the development of
quickly-erected, energy efficient, panelized homes that have been shipped around the world. DAC, along with its technologies and
expertise, were purchased by KOTT lumber where Mr. Armstrong continues with his contributions and his passion.
According to a recent housing survey, the requirement for social housing in Nunavut dwarfs all other jurisdictions in Canada.
In July 2009, the Nunavut Housing Corporation (NHC) put out a public tender for just over 140 social housing units to be
built in 19 communities across Nunavut. DAC International (a division of Kott Group) developed a unique panelized solution
designed to meet the energy performance requirements specified by NHC while dealing with the practical challenges that are
unique to building in the north. In September 2010, the first units were delivered to Pangnirtung, Nunavut and by the end of the
construction season in January, all but a handful of the building shells had been erected. This presentation will trace the project
from the RFP stage, through design development, manufacturing and ultimately provide feedback from the builders on site.
3:30 Helen Griffin, Canadian Wood Council
Building Codes, How They Can Help
Helen Griffin, P.Eng., has over 20 years of working experience with the forest industry. Helen worked in the U.K. as a consultant to
COFI on market access issues from 1989 to 1992. This was followed by 14 years with Weyerhaeuser Ltd., in both Canada and the
U.S.A., in their Sales and Marketing Groups. There she worked with the sawmills, the customers and various industry and customer
associations. Helen joined the Canadian Wood Council as Vice President, Codes and Engineering in 2006.
The Canadian Wood Council represents the Canadian wood products industry through a national federation of associations.
The CWC’s vision is a “Wood First” culture in North America where wood products are recognized as the sustainable
building material of choice for residential and non-residential construction. CWC provides technical and knowledge transfer
services relating to codes, standards and regulations. Without these services, the wood products industry would be vulnerable
to a long-term, non-recoverable loss of market share. CWC’s focus is on increasing the use of wood products in construction.
4:00 Paul Morris, FPInnovations
Preservative Treatment & Design Specifications for Durable Disaster Relief Housing
Dr. Paul Morris is Group Leader – Durability and Protection at FPInnovations, Canada’s National Forest Products Research
Institute. His team at FPInnovations meets client needs for research in short-term protection of wood during harvesting, transport
and storage, and long-term durability in service. The latter includes durability by nature, durability by design and durability by
treatment. Paul has twenty eight years experience in wood preservation research since obtaining his PhD from Imperial College of
London University. He has authored or co-authored over 300 papers, technical reports, contract reports and other publications. As a
member of the International Research Group on Wood Preservation he maintains awareness of new technologies under development
throughout the world. He also participates in collaborative research and test method development. His areas of expertise include
international wood preservation standards, treatment of Canadian wood species, and factors affecting the durability of wood
products. Paul is also an adjunct professor in the Department of Wood Science at the University of British Columbia.
Ottawa, Canada 4
6. Light wood frame is ideal for rapid provision of medium- to long-term shelter after natural disasters. However disasters often
occur in tropical regions with severe decay and termite hazards for wood. In extreme northern climates high occupancy loads
and the requirement for substantial insulation can result in condensation and mould growth if wall and roof systems are not
carefully designed. The desire of aid organizations to maximize the number of shelters delivered tends to drive down the
allowable cost dictating simplified designs with fewer moisture management features. It may also be difficult to control the
quality of construction in some regions. Once built, “temporary” structures are commonly used for much longer than their
design life. All these factors mean the wood used typically needs to be preservative treated. Selection of preservative and
treatment process must take into account the regulations in the exporting and receiving countries, the potential for human
contact with the treated wood, the building design, the wood species and the local decay and termite hazard. Preservative
penetration and retention requirements will be described. Simple design features that reduce moisture and termite problems
will be discussed. Examples will be provided from the response to the 2004 Tsunami in Indonesia and the 2010 Earthquake in
Haiti.
4:30 Sarah Shima, Canadian Co-Operators Association of Canada
The Role of Credit Unions in Post Disaster Rebuilding
With over ten years of international development experience, Sarah Shima has most recently worked on Sri Lankan reconstruction
efforts with the SANASA credit union movement. With experience in Asia, the Americas, and Africa, Ms. Shima has also worked
with the Canadian Co-operative Association on projects in micro-insurance, agriculture, micro-enterprise, and national policy
development. A generalist with broad knowledge, Ms. Shima’s areas of experience include: partnership and organisational
development; results-based management; sustainable community development; ecology and environmental issues; climate change;
democratic governance; and community conflict resolution.
Post-disaster reconstruction can lead to an exacerbation of existing problems if not carefully managed. Especially in the case
of international organizations providing disaster relief housing, donor dependency, slow rates of reconstruction, community
conflict, and corruption are challenges that must be met for housing construction to meet the needs of the beneficiaries.
Locally-owned and managed financial institutions, such as credit unions, can provide the established structure necessary to
overcome these challenges, and help vulnerable groups, such as women with young children and young adults, receive housing
assistance as soon as possible. This presentation will discuss the best practices and lessons learned of partnering with credit
unions to provide disaster relief housing, developed through five years of housing reconstruction efforts following the 2005 Sri
Lankan tsunami.
5:00 Cocktail Reception – Hot and Cold Hors-‘oeuvres - EXHIBITION HALL
This two-hour event will provide an opportunity to network with exhibitors, speakers and participants.
Library and Peace Tower, Ottawa
5 2011 Sustainable Disaster Relief Housing Conference
7. Evening Session: BREAKOUT SESSIONS í LE SALON
Three break-out sessions will give exhibitors the opportunity to share their relief-effort experiences.
7:00 Terry Robinson, Canada Mortgage and Housing Corporation
Training as an Essential Element of Reconstruction
Terry Robinson is the National Director of Housing Export at Canada Mortgage and Housing Corporation, where he coordinates a
team of 28 trade consultants and technical staff in assisting the Canadian housing industry to expand and diversify their export of
housing products and systems to markets in the Americas, Europe and Asia. Terry is originally trained as an architect. His career
has included 24 years at CMHC in technical research, industry training and export development, and 8 years in the private sector in
architectural practices and in energy and environmental consulting.
In rebuilding after a disaster, governments and aid agencies are generally more receptive to housing solutions that involve local
labour. Canada’s wood-based housing systems offer many advantages, both as a reasonably affordable solution to housing needs
and as a means of creating local employment. However, most countries, particularly in the developing world, have limited
familiarity with wood-frame construction and have many concerns over its long-term durability. Therefore, the delivery of
wood-based housing from Canada must be paired with systematic training to ensure that the housing is built successfully and
will be adequately protected from fire, moisture, hurricanes, termites and earthquakes. This break-out session will highlight
some of the Canadian training resources available, including CMHC’s International Training Team, Canada Wood training
programs, community colleges and aboriginal housing capacity development, along with examples of how these have already
been applied in various parts of the world. A discussion will then be facilitated on how these resources can be best utilized
in future reconstruction efforts, as part of a comprehensive solution from Canada, in order to secure contracts for Canadian
suppliers and to ensure successful implementation.
7:20 Pat Donahue, University of Minnesota
Plug and Play Housing
Patrick Donahue is director of the Secondary Wood Products Program within the Forestry/Forest Products Division of the Center
for Applied Research and Technology Development at the University of Minnesota. He is a wood scientist with a broad product
development background that includes wood chemical modification, hardwood lumber and dimension, a wide range of laminating,
engineered wood flooring, interior millwork, fenestration, cabinetry, office furniture, small diameter timber processing and wood frame
housing systems. Pat also has an extensive background in sales and marketing with over 13 years of experience in managing industrial
sales and marketing developments. He has been trained in a number of continuous improvement methods and various creativity tools.
The Natural Resources Research Institute has teamed up with European connector technology company Knapp Verbinder
to develop a unique systems approach to ready to assembly self contained relief housing structures. The resulting structures
are both ready to assemble and ready to dissemble. Making the deployment and redeployment possible. These plug and play
methods feature wood framed closed wall techniques to minimize and streamline field construction labor activities. The roof
decks and floor decks are also closed systems with the connector detail hidden once assembled. This breakout session will
review the project activities and demonstrate the system in greater detail.
7:40 Graham Savage, Business New Brunswick
Manufactured Housing Capabilities in New Brunswick
Graham Savage is a Wood Products Specialist who completed a BScF (Resource Mgmt) and an MF (Resource Economics) in
1984 at UNB Fredericton. He has worked for the Province of Newfoundland in the Dept of Forest Resources & Lands and the
Executive Council. He worked for the Canadian Forest Service in Fredericton as a Resource Economist with lots of time spent in
Nova Scotia. He worked in the private sector on a joint venture with a Norwegian company for a North American import-export
& manufacturing operation in NB. He has worked as a Business Consultant and currently serves as a Technical Specialist in Wood
Products Manufacturing for the Province of New Brunswick, Department of Business NB.
An overview of the manufactured housing industry will be provided which will include product offering today, with a focus on
disaster relief appropriate products which are currently available. The supply chain will also be presented, and finally emerging
products and capabilities which could be introduced to meet disaster relief requirements by the industry will be explored.
Ottawa, Canada 6
8. PROGRAM DETAILS, continued
FRIDAY, OCTOBER 28
7:30 BREAKFAST - PANORAMA ROOM
Morning Session 3: REFINING THE RESPONSE í PANORAMA ROOM
This session will include three working plenaries, each with a keynote speaker and an expert panel. A facilitator will engage
panellists and participants in developing options for preparedness strategies to help mitigate delays in the delivery of solutions
for regions at risk. Following the working plenaries, a keynote speaker will close the conference with a broader view on disaster
relief building needs and wood’s potential role.
8:00 Judy Plante, Facilitator
Review of Sessions 1 & 2
Introduction of Working Plenary Sessions
WORKING PLENARY #1
8:15 William Lawton, U.S. Department of Commerce - US Southcom
Keynote: Initial Stages of Structure & Methodology for Public/Private Cooperation in Disaster Relief & Humanitarian
Assistance Programs
Expert Panel: CIDA, US AID, US Dept. of Comm.
Originally sent to the U.S. Southern Command as the Department of Commerce representative on the Haiti Task Force, Bill Lawton
is now the DOC liaison officer embedded in the J9 Business Engagement division. He has more than 20 years in Government Service,
twelve with the Commercial Service. He has also worked an equal amount of time in the private sector directing international
marketing at both U.S. and foreign firms. Prior to his current assignment, Mr. Lawton served as Senior Trade Specialist at the Fort
Lauderdale Export Assistance Center. Before this he was the Principal Commercial Officer at the U.S. Consulate in Vladivostok
Russia and the Commercial Consul at the U.S. Consulate in Shanghai, China. In his last position in the private sector he worked as
a Director of International Marketing in the offshore oil and gas industry. Prior to these positions he was employed in the tourism
industry for Holland America-Westours and Princess Cruises eventually ending up as the planning manager for Society Expeditions.
He has worked in many countries in Africa and Asia before joining the Foreign Commercial Service and being assigned to Shanghai.
He served in the U.S. Navy with the Riverine Patrol Force in Vietnam and then aboard the Polaris Submarine U.S.S. George
Washington Carver (SSBN 656) out of Holy Loch, Scotland.
In this portion of the program, Bill Lawton, will first outline why a US Combatant Command requested a Commercial Officer
and how he functioned during the Haiti and Chile earthquake disasters. He will show how this evolved into a permanent role in
HA/DR situations and discuss why it might be of interest to the forest products industry.How to get more and better private
sector involvement? Bill will outline the theme that corporate social engagement is moving well beyond altruistic philanthropy.
He will delineate the role that the industry might have in programs that are beginning to emerge on both a local level, such as
the Caribbean Port Resiliency Program (PREP), and on a national level through the U.S. Chamber of Commerce’s Business Civic
Leadership Center’s (BCLC) Business for Good Map, as well as its International Business Corps.
Outaouais River, Ottawa
7 2011 Sustainable Disaster Relief Housing Conference
9. WORKING PLENARY #2
9:15 Charles Setchell, USAID/OFDA
Keynote: Prefabricated Shelters: Points to Consider
Expert Panel: CMHC, CWC, Maison Laprise, FPInnovations, Kott Lumber
Charles A. Setchell is Senior Shelter, Settlements & Hazard Mitigation Advisor for the USAID Office of US Foreign Disaster
Assistance. Mr. Setchell has 35 years of experience in managing the process of physical, social, and economic change, both in the US
and abroad. This professional experience is rooted in undergraduate (University of California, Davis) and graduate (University of
California, Berkeley) degrees in urban and environmental planning, as well as doctoral studies in urban planning at MIT. Since his
arrival at OFDA in 1998, Mr. Setchell has helped respond to all major international disasters/crises, designing and implementing
shelter and settlements projects and disaster risk reduction activities in numerous countries, as well as promoting “DRR” through the
integration of relief and development activities. He makes presentations at training courses, meetings, and conferences on a regular
basis, and has published on a wide variety of topics.
Responding to large-scale shelter needs in the wake of natural disasters and humanitarian crises is challenging in the extreme,
for adequate, habitable, safe, private, and secure shelter is fundamental to social and economic recovery. But shelter is more
than “four walls and a roof,” and needs are diverse, requiring careful, on-the-ground assessment of the capacities, resources,
opportunities, and disaster impacts in affected communities. Pre-fabricated shelter is often proposed as a solution to large-
scale, diverse needs, but this form of shelter also introduces a number of concerns that can undermine timely and appropriate
responses. The session keynote will discuss some of the points to consider when thinking about pre-fabricated shelters as a
post-disaster shelter solution.
10:15 COFFEE BREAK
WORKING PLENARY #3
10:30 Tim Reinhold, Insurance Institute for Business & Home Safety
Keynote: Rebuilding after Disasters: A Loss Mitigation Perspective
Expert Panel: SOCODEVI and Canadian Co-Operative Association
Tim Reinhold earned BS, MS and Ph.D. degrees in Engineering Mechanics from Virginia Tech in 1973, 1975 and 1978, respectively.
He began his professional career as a National Research Council Postdoctoral Associate at the National Institute for Standards
and Technology in 1978 and later continued at NIST as a research structural engineer. At NIST he worked as support staff
for development on national seismic standards, analyzed winds for Hurricane Frederic, participated in several large failure
investigations and organized an International Workshop on Wind Tunnel Modeling for Civil Engineering applications. From 1983
to 1985 he worked for the Canadian firm Morrison Hershfield Theakston and Rowen that later became RWDI where he worked
as a project engineer on wind tunnel and snow investigations for structures throughout North America. In 1995 he joined Applied
Research Associates in Raleigh, North Carolina where he headed up their wind tunnel modeling efforts. In 1990, Dr. Reinhold
joined the Danish Maritime Institute as chief engineer for aerodynamics. He participated in the commissioning of their 14-meter
wide boundary layer wind tunnel and helped direct wind studies for the Great Belt Bridge in Denmark and the European Southern
Observatory in Chile. In 1992, Dr. Reinhold joined the faculty of the Civil Engineering Department at Clemson University and rose
to the rank of Professor.
The presentations and discussions at this conference clearly show that there is much more that needs to be considered in
developing effective sustainable relief housing than simply shipping in tents or moving in mobile homes and travel trailers. Relief
housing is frequently used for extended periods of time and in developing countries may become a part of the permanent
housing in the country. Consequently, the housing needs to be designed for the climate and risks that exist where it will be
used, must provide a healthy environment, and must be culturally acceptable by individuals, families, and communities. Building
codes are important because they provide basic requirements for assuring a measure of strength and safety. However, we
should not lose sight of the fact that they are minimum requirements and we need to look closely at their strengths and
weaknesses in terms of providing durable sustainable housing. At the Insurance Institute for Business & Home Safety we
have spent considerable time researching and evaluating the performance of existing homes and the influence of modern
building codes in reducing damage and losses. Modern codes that lead to engineering based designs of buildings do a good job
of providing the needed structural resistance for anticipated future events. However, they do not necessarily address non-
Ottawa, Canada 8
10. structural issues that can lead to poor overall performance, continuing losses and risks of displacement. This presentation will
deal with a number of these hazard-specific issues.
11:30 Judy Plante, Facilitator
Review of Session 3
Closing Keynote í PANORAMA ROOM
‘11:45 Michael Green, mgb ARCHITECTURE + DESIGN
Post-Disaster Solutions - Housing and Beyond, New Building Approaches in Wood
Michael Green, Architect and founder of mgb ARCHITECTURE + DESIGN: Mr. Green’s building design expertise ranges from
residential to commercial, from single family homes to international airports. His preoccupation is with safe, cost-effective and
carbon neutral solutions to the world’s building challenges and champions mass timber solutions for all.
Architect Michael Green is dedicated to bringing attention to some of the overwhelming challenges in world architecture
today. Michael is championing a shift to new ways of building with Mass Timber products that will meet today and tomorrow’s
building challenges in a safe, cost-effective, and carbon neutral manner. His FFTT approach to Mass Timber construction has
been engineered to efficiently build mid- and high-rise buildings up to 30 storeys in height. Michael will present how new wood
approaches to building represent a critically important shift in the world’s urban landscapes and an effective safe solution
for disaster relief and post disaster reconstruction. Michael will speak to how the large scale buildings necessary to address
the scale of need after major disasters require a new scale of solution. Prefabricated large structures offer cost-effective and
efficient options for the complex challenges after a disaster and provide a permanence necessary for long-term community
regrowth.
Confederation Square with the beautiful facade
of the Central Chambers, Ottawa
9 2011 Sustainable Disaster Relief Housing Conference
12. The National Arts Centre, Ottawa, Ontario
The Forest Products Society is an international not-for-profit technical association
founded in 1947 to provide an information network for all segments of the forest
products industry. The Society’s Vision is to be the world leader in technical
information transfer to further the socially beneficial use of wood and fiber resources.
The Society’s Mission is to foster innovation and research in the environmentally
sound processing and use of wood and fiber resources by disseminating information
and providing forums for networking and the exchange of knowledge.
To become a member, please visit www.forestprod.org or call +1 608 231 1361.
Forest Products Society
2801 Marshall Ct
Madison, WI 53705
United States of America
www.forestprod.org
(p) +1 608 231 1361
(f) +1 608 231 2152