This document provides information about sauna room layouts, sauna heaters, and sauna accessories. The first section lists 20 standard sauna room layouts with codes, dimensions, person capacities, and heater power. The second section describes two types of sauna heaters - Nordia and Zelma - with codes, power ratings, dimensions, and volume capacities. The third section lists 9 sauna accessories that are included in a standard accessories kit for any sauna room purchase, such as wooden pillows, lights, thermometers.
This document provides an overview of the Heating Ventilation and Air Conditioning (HVAC) module of the ECBC Training Workshop. It discusses key concepts in HVAC including whole building design approach, non-refrigerative and refrigerative cooling techniques, HVAC system types, components and efficiency metrics, building commissioning, and ECBC requirements. The document is intended to educate professionals on best practices in HVAC system design and operation to improve energy efficiency in buildings.
This document provides an overview of municipal water supply systems, including sources of water, water treatment processes, storage, distribution, and calculations for pressure. It describes how water is obtained from both groundwater aquifers and surface sources like rivers and reservoirs. Water is treated depending on source quality before being pumped to storage tanks and distributed through a piping network to customers, with minimum pressures of 40 psi for residences. The document also defines key terms and shows examples of calculating static head, pressure, head loss, and actual delivery pressure.
This document discusses the reuse of greywater in buildings. It provides an overview of greywater quality guidelines, treatment technologies, and case studies of greywater reuse systems. Some key points include:
- Greywater accounts for 50-80% of household wastewater and can be treated and reused for purposes like toilet flushing and irrigation.
- Treatment typically involves physical separation followed by disinfection. Promising technologies include membrane bioreactors and constructed wetlands.
- Case studies from Norway, Italy, Germany demonstrate greywater systems that consistently achieve high removal of contaminants to meet reuse standards.
Only 3% of the world's water is fresh water, which is found as surface water, in rivers underground, frozen in glaciers and ice caps, or as groundwater. The water cycle ensures the continuous movement of water on, above, and below the surface of the Earth. Globally, an estimated 69% of fresh water is used for agriculture, 22% for industry, 8% for domestic purposes, and a very small percentage for recreation. Water is treated and stored before being distributed to homes and buildings through a network of pipes and storage systems.
Water meters and its uses by Mohd KashifMohd Kashif
Water meters measure how much water a home or business uses. They work similarly to gas or electricity meters. Meters allow water usage to be tracked and billed accordingly. There are different types of meters that use displacement or velocity to measure water flow. Factors like pipe size and flow rate determine which type of meter is suitable. Meters provide benefits like encouraging conservation and detecting leaks, but also involve costs for installation, reading, and replacement over their lifespan.
This document discusses hot water supply systems for buildings, including materials, piping, and system designs for large buildings and high-rise buildings. It covers acceptable pipe materials like copper, polybutylene, and cross-linked polyethylene. For large buildings, it describes a centralized system with zoning valves to isolate floors for repairs. For high-rises, it explains zoning floors, using a head tank to improve water flow to upper floors, and maintaining pressure throughout the system.
The document provides information about plumbing systems in buildings. It defines a plumbing system as a system of pipes, drains, fittings and devices installed in a building for distribution of water and removal of wastewater. It then lists the common types of pipes used - galvanized iron pipes, cast iron pipes, unplasticized PVC pipes, and rigid PVC pipes - along with their typical diameters and properties. Finally, it describes the two main types of water distribution systems - gravity distribution systems that rely on an elevated water source, and pump and storage systems that use pumps to move water to overhead tanks.
Plumbing Design Package includes over (18) Programs and Forms that include: "accurate" water pipe system sizing, waste and vent system sizing, roof drain system sizing, natural gas system sizing, water heater sizing, and several additional Plumbing Design tools.
This document provides an overview of the Heating Ventilation and Air Conditioning (HVAC) module of the ECBC Training Workshop. It discusses key concepts in HVAC including whole building design approach, non-refrigerative and refrigerative cooling techniques, HVAC system types, components and efficiency metrics, building commissioning, and ECBC requirements. The document is intended to educate professionals on best practices in HVAC system design and operation to improve energy efficiency in buildings.
This document provides an overview of municipal water supply systems, including sources of water, water treatment processes, storage, distribution, and calculations for pressure. It describes how water is obtained from both groundwater aquifers and surface sources like rivers and reservoirs. Water is treated depending on source quality before being pumped to storage tanks and distributed through a piping network to customers, with minimum pressures of 40 psi for residences. The document also defines key terms and shows examples of calculating static head, pressure, head loss, and actual delivery pressure.
This document discusses the reuse of greywater in buildings. It provides an overview of greywater quality guidelines, treatment technologies, and case studies of greywater reuse systems. Some key points include:
- Greywater accounts for 50-80% of household wastewater and can be treated and reused for purposes like toilet flushing and irrigation.
- Treatment typically involves physical separation followed by disinfection. Promising technologies include membrane bioreactors and constructed wetlands.
- Case studies from Norway, Italy, Germany demonstrate greywater systems that consistently achieve high removal of contaminants to meet reuse standards.
Only 3% of the world's water is fresh water, which is found as surface water, in rivers underground, frozen in glaciers and ice caps, or as groundwater. The water cycle ensures the continuous movement of water on, above, and below the surface of the Earth. Globally, an estimated 69% of fresh water is used for agriculture, 22% for industry, 8% for domestic purposes, and a very small percentage for recreation. Water is treated and stored before being distributed to homes and buildings through a network of pipes and storage systems.
Water meters and its uses by Mohd KashifMohd Kashif
Water meters measure how much water a home or business uses. They work similarly to gas or electricity meters. Meters allow water usage to be tracked and billed accordingly. There are different types of meters that use displacement or velocity to measure water flow. Factors like pipe size and flow rate determine which type of meter is suitable. Meters provide benefits like encouraging conservation and detecting leaks, but also involve costs for installation, reading, and replacement over their lifespan.
This document discusses hot water supply systems for buildings, including materials, piping, and system designs for large buildings and high-rise buildings. It covers acceptable pipe materials like copper, polybutylene, and cross-linked polyethylene. For large buildings, it describes a centralized system with zoning valves to isolate floors for repairs. For high-rises, it explains zoning floors, using a head tank to improve water flow to upper floors, and maintaining pressure throughout the system.
The document provides information about plumbing systems in buildings. It defines a plumbing system as a system of pipes, drains, fittings and devices installed in a building for distribution of water and removal of wastewater. It then lists the common types of pipes used - galvanized iron pipes, cast iron pipes, unplasticized PVC pipes, and rigid PVC pipes - along with their typical diameters and properties. Finally, it describes the two main types of water distribution systems - gravity distribution systems that rely on an elevated water source, and pump and storage systems that use pumps to move water to overhead tanks.
Plumbing Design Package includes over (18) Programs and Forms that include: "accurate" water pipe system sizing, waste and vent system sizing, roof drain system sizing, natural gas system sizing, water heater sizing, and several additional Plumbing Design tools.
This document discusses water supply systems. It covers why water treatment is important for public health, common uses of water, sources of water like aquifers and surface water, the water treatment and storage process, and how water is distributed through a piping system to homes and businesses. The distribution system aims to provide clean water at adequate flow, pressure, and quality for uses like drinking, bathing, cleaning, and fire protection.
The document discusses various aspects of plumbing systems, including water supply sources and distribution, direct and indirect water supply, sanitary systems, pipes, traps, and different plumbing system types. It provides descriptions and diagrams to explain direct and indirect water supply systems, the components of sanitary systems including soil, waste, vent and rainwater pipes, types of traps according to shape and use, and one-pipe, two-pipe, single stack, and fully ventilated one-pipe plumbing systems.
01 hap4 4-space - Hourly Analysis Program - CarrierMonzer Salahdine
This document provides an overview of the capabilities of Carrier's HAP 4.4 HVAC design and energy analysis software. It describes the two main operating modes in HAP - System Design mode for estimating loads and sizing systems, and Energy Analysis mode for hourly energy simulation. Key features covered include building load calculation methods, modeling approach using elements, spaces, zones, air systems and plants, and energy analysis reports. The document also discusses HAP's data management features and provides system requirements for installation.
This document is a proposed site plan for a demolition project located at 285 Gooch Street, Thornbury VIC 3071 Australia. It shows the existing structures and site features that are proposed to be demolished, including a single storey weatherboard dwelling, shed, garage, and other structures. Site details are provided such as spot levels, fencing types, private open space, driveways, and landscaping. The demolition plan is drawn at a scale of 1:200.
This document discusses different methods of water distribution systems. The most common combined gravity and pumping system pumps treated water to an elevated reservoir, then distributes it using gravity. At the domestic level, there are two types of cold water systems - direct supply systems distribute water directly from mains to fixtures if pressure is sufficient for fewer than two floors, while indirect systems use a storage cistern to supply fixtures and reduce pressure. Key parts of distribution systems include service pipes, distribution pipes, risers, fixture branches and fixture supplies.
This document discusses different types of pipes and valves used in water supply systems. It describes common pipe materials like cast iron, steel, concrete, plastic and their properties. It also explains different valves - stop valves control water flow, check valves allow one-way flow, air relief valves remove trapped air, drain valves empty lines, and pressure relief valves release excess pressure. Pipes and valves are essential to control and distribute water while minimizing losses.
The document discusses water quality assessment and surveillance. It outlines various physical, chemical and biological parameters used to evaluate drinking water quality according to WHO guidelines. These include turbidity, total dissolved solids, colour, odor, taste, temperature, pH and presence of inorganic constituents like chloride, calcium, magnesium, iron and sodium. Methods for testing parameters like turbidity, chloride, hardness, iron and fluoride are described. The document also covers bacteriological indicators of water quality including coliforms, E. coli and presence of pathogens. It provides methods for testing coliform bacteria using membrane filtration and multiple tube techniques.
The document discusses the components and process of an air conditioning system. It describes the key elements as the compressor, condenser, expansion valve, and evaporator. The refrigerant gas flows in a cycle between these components, being compressed into a hot gas in the compressor, condensed into a liquid in the condenser, expanded in the expansion valve, and evaporated to absorb heat in the evaporator. There are different types of air conditioning systems including room, package, and central systems.
The document discusses ductwork systems for forced air heating and cooling. It describes the basic components which include a furnace, air conditioner, ductwork and registers. There are two main types of ductwork systems - the conventional system which locates supply vents on interior walls and return vents on exterior walls, and the perimeter system which locates supply vents along exterior walls. Furnaces can be upflow, downflow, or horizontal depending on their orientation and air flow direction. Distribution systems include the radial piping system using round ducts or the extended plenum system combining round and rectangular ducts.
Plumbing is the system of pipes, drains, and fixtures installed in a building to distribute water and remove wastewater. It comprises pipes, fittings, valves, and fixtures for water supply and drainage. Common pipe materials include PVC, copper, cast iron, and galvanized steel. Key plumbing fittings include elbows, tees, crosses, caps, and reducers. Common plumbing fixtures are sinks, toilets, bathtubs, and showers. Proper installation and maintenance of plumbing systems is important for sanitation and preventing waste backups.
The document discusses building services and water supply systems. It provides an overview of building services including mechanical, electrical, and plumbing systems. It then focuses on water supply, describing various sources of water including groundwater, surface water, and desalination. The key steps of water purification are discussed, including clarification through steps like flocculation and sedimentation, followed by disinfection through chlorine or other methods.
This document discusses HVAC systems and their energy consumption. It describes how HVAC systems maintain temperature, humidity, and ventilation levels in buildings. HVAC systems circulate air through air handling units, which heat, cool, filter and distribute air to rooms using boilers, chillers, pumps, and other mechanical equipment located in mechanical rooms. The document explains the functions of key HVAC components like AHUs, VAV boxes, economizers and how they work to condition air and ensure thermal comfort. It also notes some differences that can occur between theoretical HVAC diagrams and real-world systems.
Plumbing_services [Dr. Kamakshi Memorial Hospital].pptxFaizanAhmed396943
This document provides an overview of the plumbing services for Dr. Kamakshi Memorial Hospital. It includes information on the hospital's water supply sources, storage tanks, distribution systems, and sanitation facilities. Some key details:
- The hospital sources water through daily water lorry deliveries, as there is no local groundwater. Treated water is distributed through a pressurized pumping system.
- Overhead and underground tanks provide around 500,000 liters of total water storage capacity. Distribution pipes are sized based on water demand and pressure requirements.
- Sanitation facilities include toilets, baths, sinks, and other fixtures meeting standards. Phase II was designed for universal accessibility.
The document discusses various aspects of plumbing systems, including water supply sources and distribution, direct and indirect water supply, sanitary systems, types of pipes used, traps, and different plumbing systems like one-pipe, two-pipe, single stack, and fully ventilated one-pipe systems. It provides diagrams and descriptions of each system and their key components. The document is submitted by a student as part of their coursework and contains an index linking titles to page numbers.
The document discusses various aspects of sewage conveyance and pumping systems, including:
- Types of sewers like soil pipes, waste pipes, lateral sewers, branch sewers, and main/outfall sewers.
- Materials used for sewer construction like bricks, vitrified clay, concrete, steel, asbestos cement, plastic, and glass fiber reinforced plastic.
- Classification of sewer systems as combined, separate, or partially separate depending on how stormwater and sewage are conveyed. Combined systems convey both through one sewer while separate systems use different sewers.
Planning and design of building services in multi Story Vj NiroSh
The document discusses water supply and distribution systems. It defines a water distribution system as a network of pipes that can distribute water supply to premises in an organized manner. It notes that factors to consider when planning water supply layouts include population growth, industrial development, and sources of water supply. The main sources of water supply are listed as surface sources like rivers and lakes, and underground sources like wells and springs. The document also discusses various types of pipes used in distribution systems, as well as fittings, valves, water heating methods, and hot water supply systems.
Because of their structural design, trunnion mount ball valves are suitable for all pressure ranges and sizes.They are used by many manufacturers as a basis of design for their severe service ball valve offerings. A trunnion mount ball valve can also be advantageous for applications employing valve automation. Since the ball is not held in place by a tight fitting seal arrangement, operating torque tends to be lower for comparably sized trunnion valves, when compared to floating ball valves.
This document provides information about water loss, its types and effects. It discusses physical and non-physical water losses, techniques for detecting and locating leaks, and methods for preventing and managing water loss. The presentation outline covers water loss, waste of water and prevention, leakages, leak detection, and water management. It defines water loss and its major causes such as poor infrastructure and aging pipes. Non-physical losses include unregistered use and illegal connections. Leakage effects include consumer inconvenience and infrastructure damage. Leak detection techniques discussed include sub-dividing areas, step testing, leak localization using acoustic methods, and sounding surveys. The document also discusses leak location and water loss management methods like pressure management and rehabilitation.
This document provides an overview of visual social media. It discusses platforms like Instagram, Snapchat, Vine and Pinterest. It highlights benefits like how visual content is processed faster than text and engages audiences. Examples are given of companies that effectively use visual social media like Jaguar Land Rover. The document also covers pros and cons of different platforms and encourages participants to try the platforms themselves. It concludes by asking how visual social media could be useful for different businesses.
The document is a list of failed banks maintained by the FDIC. It provides information on banks that have failed since October 2000, including the bank name, city, state, FDIC certificate number, closing date and date the information was last updated. The list is sortable by clicking arrows next to column headers. Customers and vendors of failed banks can find information on acquiring banks, how accounts and loans are affected, and how to file claims.
This document discusses water supply systems. It covers why water treatment is important for public health, common uses of water, sources of water like aquifers and surface water, the water treatment and storage process, and how water is distributed through a piping system to homes and businesses. The distribution system aims to provide clean water at adequate flow, pressure, and quality for uses like drinking, bathing, cleaning, and fire protection.
The document discusses various aspects of plumbing systems, including water supply sources and distribution, direct and indirect water supply, sanitary systems, pipes, traps, and different plumbing system types. It provides descriptions and diagrams to explain direct and indirect water supply systems, the components of sanitary systems including soil, waste, vent and rainwater pipes, types of traps according to shape and use, and one-pipe, two-pipe, single stack, and fully ventilated one-pipe plumbing systems.
01 hap4 4-space - Hourly Analysis Program - CarrierMonzer Salahdine
This document provides an overview of the capabilities of Carrier's HAP 4.4 HVAC design and energy analysis software. It describes the two main operating modes in HAP - System Design mode for estimating loads and sizing systems, and Energy Analysis mode for hourly energy simulation. Key features covered include building load calculation methods, modeling approach using elements, spaces, zones, air systems and plants, and energy analysis reports. The document also discusses HAP's data management features and provides system requirements for installation.
This document is a proposed site plan for a demolition project located at 285 Gooch Street, Thornbury VIC 3071 Australia. It shows the existing structures and site features that are proposed to be demolished, including a single storey weatherboard dwelling, shed, garage, and other structures. Site details are provided such as spot levels, fencing types, private open space, driveways, and landscaping. The demolition plan is drawn at a scale of 1:200.
This document discusses different methods of water distribution systems. The most common combined gravity and pumping system pumps treated water to an elevated reservoir, then distributes it using gravity. At the domestic level, there are two types of cold water systems - direct supply systems distribute water directly from mains to fixtures if pressure is sufficient for fewer than two floors, while indirect systems use a storage cistern to supply fixtures and reduce pressure. Key parts of distribution systems include service pipes, distribution pipes, risers, fixture branches and fixture supplies.
This document discusses different types of pipes and valves used in water supply systems. It describes common pipe materials like cast iron, steel, concrete, plastic and their properties. It also explains different valves - stop valves control water flow, check valves allow one-way flow, air relief valves remove trapped air, drain valves empty lines, and pressure relief valves release excess pressure. Pipes and valves are essential to control and distribute water while minimizing losses.
The document discusses water quality assessment and surveillance. It outlines various physical, chemical and biological parameters used to evaluate drinking water quality according to WHO guidelines. These include turbidity, total dissolved solids, colour, odor, taste, temperature, pH and presence of inorganic constituents like chloride, calcium, magnesium, iron and sodium. Methods for testing parameters like turbidity, chloride, hardness, iron and fluoride are described. The document also covers bacteriological indicators of water quality including coliforms, E. coli and presence of pathogens. It provides methods for testing coliform bacteria using membrane filtration and multiple tube techniques.
The document discusses the components and process of an air conditioning system. It describes the key elements as the compressor, condenser, expansion valve, and evaporator. The refrigerant gas flows in a cycle between these components, being compressed into a hot gas in the compressor, condensed into a liquid in the condenser, expanded in the expansion valve, and evaporated to absorb heat in the evaporator. There are different types of air conditioning systems including room, package, and central systems.
The document discusses ductwork systems for forced air heating and cooling. It describes the basic components which include a furnace, air conditioner, ductwork and registers. There are two main types of ductwork systems - the conventional system which locates supply vents on interior walls and return vents on exterior walls, and the perimeter system which locates supply vents along exterior walls. Furnaces can be upflow, downflow, or horizontal depending on their orientation and air flow direction. Distribution systems include the radial piping system using round ducts or the extended plenum system combining round and rectangular ducts.
Plumbing is the system of pipes, drains, and fixtures installed in a building to distribute water and remove wastewater. It comprises pipes, fittings, valves, and fixtures for water supply and drainage. Common pipe materials include PVC, copper, cast iron, and galvanized steel. Key plumbing fittings include elbows, tees, crosses, caps, and reducers. Common plumbing fixtures are sinks, toilets, bathtubs, and showers. Proper installation and maintenance of plumbing systems is important for sanitation and preventing waste backups.
The document discusses building services and water supply systems. It provides an overview of building services including mechanical, electrical, and plumbing systems. It then focuses on water supply, describing various sources of water including groundwater, surface water, and desalination. The key steps of water purification are discussed, including clarification through steps like flocculation and sedimentation, followed by disinfection through chlorine or other methods.
This document discusses HVAC systems and their energy consumption. It describes how HVAC systems maintain temperature, humidity, and ventilation levels in buildings. HVAC systems circulate air through air handling units, which heat, cool, filter and distribute air to rooms using boilers, chillers, pumps, and other mechanical equipment located in mechanical rooms. The document explains the functions of key HVAC components like AHUs, VAV boxes, economizers and how they work to condition air and ensure thermal comfort. It also notes some differences that can occur between theoretical HVAC diagrams and real-world systems.
Plumbing_services [Dr. Kamakshi Memorial Hospital].pptxFaizanAhmed396943
This document provides an overview of the plumbing services for Dr. Kamakshi Memorial Hospital. It includes information on the hospital's water supply sources, storage tanks, distribution systems, and sanitation facilities. Some key details:
- The hospital sources water through daily water lorry deliveries, as there is no local groundwater. Treated water is distributed through a pressurized pumping system.
- Overhead and underground tanks provide around 500,000 liters of total water storage capacity. Distribution pipes are sized based on water demand and pressure requirements.
- Sanitation facilities include toilets, baths, sinks, and other fixtures meeting standards. Phase II was designed for universal accessibility.
The document discusses various aspects of plumbing systems, including water supply sources and distribution, direct and indirect water supply, sanitary systems, types of pipes used, traps, and different plumbing systems like one-pipe, two-pipe, single stack, and fully ventilated one-pipe systems. It provides diagrams and descriptions of each system and their key components. The document is submitted by a student as part of their coursework and contains an index linking titles to page numbers.
The document discusses various aspects of sewage conveyance and pumping systems, including:
- Types of sewers like soil pipes, waste pipes, lateral sewers, branch sewers, and main/outfall sewers.
- Materials used for sewer construction like bricks, vitrified clay, concrete, steel, asbestos cement, plastic, and glass fiber reinforced plastic.
- Classification of sewer systems as combined, separate, or partially separate depending on how stormwater and sewage are conveyed. Combined systems convey both through one sewer while separate systems use different sewers.
Planning and design of building services in multi Story Vj NiroSh
The document discusses water supply and distribution systems. It defines a water distribution system as a network of pipes that can distribute water supply to premises in an organized manner. It notes that factors to consider when planning water supply layouts include population growth, industrial development, and sources of water supply. The main sources of water supply are listed as surface sources like rivers and lakes, and underground sources like wells and springs. The document also discusses various types of pipes used in distribution systems, as well as fittings, valves, water heating methods, and hot water supply systems.
Because of their structural design, trunnion mount ball valves are suitable for all pressure ranges and sizes.They are used by many manufacturers as a basis of design for their severe service ball valve offerings. A trunnion mount ball valve can also be advantageous for applications employing valve automation. Since the ball is not held in place by a tight fitting seal arrangement, operating torque tends to be lower for comparably sized trunnion valves, when compared to floating ball valves.
This document provides information about water loss, its types and effects. It discusses physical and non-physical water losses, techniques for detecting and locating leaks, and methods for preventing and managing water loss. The presentation outline covers water loss, waste of water and prevention, leakages, leak detection, and water management. It defines water loss and its major causes such as poor infrastructure and aging pipes. Non-physical losses include unregistered use and illegal connections. Leakage effects include consumer inconvenience and infrastructure damage. Leak detection techniques discussed include sub-dividing areas, step testing, leak localization using acoustic methods, and sounding surveys. The document also discusses leak location and water loss management methods like pressure management and rehabilitation.
This document provides an overview of visual social media. It discusses platforms like Instagram, Snapchat, Vine and Pinterest. It highlights benefits like how visual content is processed faster than text and engages audiences. Examples are given of companies that effectively use visual social media like Jaguar Land Rover. The document also covers pros and cons of different platforms and encourages participants to try the platforms themselves. It concludes by asking how visual social media could be useful for different businesses.
The document is a list of failed banks maintained by the FDIC. It provides information on banks that have failed since October 2000, including the bank name, city, state, FDIC certificate number, closing date and date the information was last updated. The list is sortable by clicking arrows next to column headers. Customers and vendors of failed banks can find information on acquiring banks, how accounts and loans are affected, and how to file claims.
Universal constants like Planck's constant h, the speed of light c, gravitational constant G, and Boltzmann's constant k can be used to structure theoretical physics. They lead to three main theories: quantum field theory (h and c), general relativity (c and G), and quantum statistics (h and k). While not fully unified, these theories underlie the standard models of particle physics and cosmology. Fundamental metrology provides reliable standards by determining the values of dimensionless constants that depend on h, c, k, and G. Metrology exists at the intersection of fundamental physics described by these theories and emergent physics involving statistical mechanics.
LMP originally stood for Lennart Muaña Panton, referring to their friend who was a unifying force. It started at a retreat in 2010 where they debuted their flag. Over time, LMP has come to represent more than just Panton - it represents their friendship, experiences, way of life, and what they will do together in the future. For them, LMP simply means "us", which is all that matters.
S-CUBE LP: Service Adaptation: A Maintenance Process ?virtual-campus
This document discusses service adaptation as a maintenance process for service-based applications. It presents research that identified adaptation activities from literature and mapped them to the S-Cube lifecycle to create an adaptation process model. The research conducted a systematic literature review of service-based application development processes, identified those that support adaptation, and developed a process reference model for adapting service-based applications based on data analysis and an expert opinion survey. The model was initially validated and will require further validation. The document concludes that existing approaches often do not address adaptation and traditional maintenance practices can be used when developing adaptable service-based applications.
Raunak Agarwal is seeking a role in sales, marketing, business development, public relations, or client services. He has nearly 5 years of experience managing business development through sales, marketing, product promotions and launches, brand management, and client relationship management. He is proficient in sales and marketing, certification, faculty training, business development, product promotion, brand management, client relationship management, and team management. He holds a BBA and has worked as a marketing manager and business development manager for jewelry companies.
Sunil Kumar is seeking a position as a team member focused on business growth. He has 3.5 years of experience working as a Process Associate for Thomson Reuters and Capgemini Business Services. His responsibilities included processing accounts receivable, cash application, invoice creation, and ensuring timely and accurate reporting. He is proficient in SAP, Oracle, Excel, and has a background in finance and accounts.
The document provides an after action review of the Mile High DICE FY-2015 Cybersecurity Domain tabletop exercise, which was comprised of a training session and continuity tabletop exercise focused on cybersecurity. The exercise involved over 40 participating federal, state, local, and private organizations and was held on November 13, 2014 in Aurora, Colorado. The objectives of the exercise were to increase awareness of incorporating cybersecurity into continuity planning, discuss challenges and best practices, examine continuity of essential functions during a cybersecurity emergency, and identify solutions to gaps in organizational plans. The after action review analyzes the results and identifies strengths and areas for improvement.
This document discusses how social media can be used effectively for businesses. It recommends starting with listening on social media to understand customers, journalists and influencers. Then it suggests engaging with influencers and sharing valuable content such as images, videos, blogs, and infographics. Developing thought leadership as an expert can help build reputation and awareness through blogging, guest blogging, and publishing opinions on industry trends. The key is using social media to listen first before engaging and sharing content to add value for potential customers.
This document provides information about new wellness products from Jaquar, an Indian bath brand. It describes steam generators, saunas, spas, and swimming pools that can create a complete wellness zone at home. The products include features like chromotherapy lights, aromatherapy, massage jets, and digital controls. Specifications and benefits are provided for each product, such as reducing stress, detoxification, and improved circulation. Installation guidelines are also included for the steam generators.
This document provides information on cooking appliances from Capella, including chimneys, hobs, ovens, and other built-in kitchen appliances. It highlights key features such as efficient ventilation, touch controls, durable materials, and safety features. The document includes photos and specifications for a wide range of high-end Capella appliances designed for luxury kitchens.
This document provides information about industrial gas accessories sold by Lifestyle Appliances Ltd, including contact details, product listings, and ordering instructions. It lists various regulators, changeovers, hoses, fittings, and other gas equipment. Contact can be made via telephone, fax, email, or post. Carriage terms and how to place orders are also outlined. The document appears to be a catalog or price list for a company that sells gas equipment and accessories.
Complete industrial electric heating element catalog including cartridge, band, tubular, screw plug, flexible, and cable heating elements. Reference for electric heating applications and OEM design. Courtesy of Belilove Company-Engineers and Hotwatt.
This document provides an overview of several LED lighting product lines, including LED HID replacement lamps, LED edgelit panels, waterproof LED integrated marine fixtures, LED diffuser downlights, LED slim downlights, and LED recessed spotlights. For each product line, it describes the product features, performance specifications, available models, applications and customer value in terms of energy savings, longevity, and cost savings over traditional lighting solutions.
Enersol Flomar insulation jackets can reduce heat loss from steam, condensate, and hot water systems by up to 90%, lowering costs and carbon emissions. A typical site survey is free and identifies uninsulated pipes and equipment. The report then lists potential savings from fitting custom insulation jackets, which have a payback period of less than one year in many cases. Insulation jackets are durable, easy to install and remove, and help reduce energy costs and carbon footprints for facilities like boiler houses.
TEV Limited is a leading UK HVAC manufacturer established in 2003 with ISO quality standards. It has three divisions that produce air source heat pumps, packaged air conditioning, refrigeration, and close control systems. TEV's products are distributed worldwide and it provides energy efficient heating and cooling solutions for residential, commercial, and industrial applications.
The document appears to be a product catalog for heating products made by QUUP. It includes information on various radiator models including dimensions, specifications, and colors. The radiators are made of aluminum and can be used for low-temperature hydronic heating systems. QUUP aims to create beautiful, efficient heating solutions through innovative design and the use of new technologies.
We are a products, solutions and services wholesale supplier in water treatment. We provide only businesses companies such as distributors, retailers, manufacturers and assemblers.A catalog including carefully selected products, from the most prestigious brands in the Water Treatment market, operative website, personalized services, precise and efficient logistics, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, make of Sinergroup Srl a reference for many companies of the market. A continuous and consistent effort, the ability to anticipate the evolution of the market demand and orientation to the understanding and satisfaction of our customers has always characterizes us in our work.
Born with the objective view in the exclusive distribution: Continue to be "Leader of the Brand Leader ", with activities and services of value. A choice of specialization that in recent years has allowed us to develop a unique knowledge and experience in the market. The thorough water treatment market understanding and high commercial performance, make us able to offer to our customers many products and services more personalized and appropriate to the individual end user. Our mission is to become your best business Partner!
Lithonia Lighting offers a line of track lighting products called the LTH Series. The series includes track heads that are easy to install and adjust, and can be used with a variety of lamp types. The document provides details on three track head models (LTH1000, LTH2000, LTH3000) including specifications, features, and compatible lamps.
This document appears to be a product catalogue for LED lighting products. It includes summaries and specifications for 10 top selling products, including adjustable downlights, fixed downlights, floodlights, panels, and accessories. The products are rated for IP65, IP44, or IP20 protection and have lumen outputs ranging from 173lm to 24800lm. Warranties provided are 3-5 years. Cutout sizes, beam angles, color temperatures and other specifications are given for each product.
The document discusses occupancy sensors and PIR motion sensors for lighting control. It describes Crabtree's plug-and-play master/slave sensor system that can save up to 41% on lighting costs. The system includes ceiling-mounted master and slave sensors with a detection range of up to 24 meters. It also describes Crabtree's flush-mount and surface-mount corridor and ceiling sensors with a detection range of up to 24 meters.
This document summarizes occupancy and motion sensors from Crabtree. It describes their plug-and-play installation, energy savings of up to 41% from using sensors, and detection ranges of up to 24 meters. Key products include ceiling and corridor sensors with adjustable detection zones, as well as IP55 rated outdoor sensors.
We are a products, solutions and services wholesale supplier in water treatment. We provide only businesses companies such as distributors, retailers, manufacturers and assemblers.A catalog including carefully selected products, from the most prestigious brands in the Water Treatment market, operative website, personalized services, precise and efficient logistics, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, make of Sinergroup Srl a reference for many companies of the market. A continuous and consistent effort, the ability to anticipate the evolution of the market demand and orientation to the understanding and satisfaction of our customers has always characterizes us in our work.
Born with the objective view in the exclusive distribution: Continue to be "Leader of the Brand Leader ", with activities and services of value. A choice of specialization that in recent years has allowed us to develop a unique knowledge and experience in the market. The thorough water treatment market understanding and high commercial performance, make us able to offer to our customers many products and services more personalized and appropriate to the individual end user. Our mission is to become your best business Partner!
This document contains examples of graphic design work by Paul Seager including logos, websites, branding, and other materials created for various clients. Projects included logos and branding for wealth management companies, a restaurant, outdoor equipment supplier, and hair product packaging design. Services provided encompassed logo design, branding, websites, advertising, and other graphic design work.
The Versol standard range of heat exchangers are is developed to generate hot water/cold water efficiently with/without the need for storage. VERSOHEX can be used with storage tanks to heat up the stored water or can be inline in the system to produce hot/cold water directly. VERSOHEX can be in three ranges as below
VERSOHEX-IM – Immersion Heat Exchangers
VERSOHEX-PL- Plate Heat Exchangers
VERSOHEX-ST- Shell & Tube Heat Exchangers
VERSOHEX-IM Range VERSOL are specialized in the design and manufacturing of Immersion HeatExchangers for deferent applications. VERSOL Immersion Heaters are capable to fulfill customer requirements in Heating or Cooling of liquids. VERSOL offers mainly two type of Immersion Heaters. Immersion Heaters are designed to use with VERSOTHERM Calorifiers or Standard models are available to use with different Calorifiers Tanks. Material and size selection should be taken care after confirming the Calorifiers tank material and dimensions. 1. Electric Immersion Heaters (VERSOHEX-IM-ELE Range) 2. U Tube Bundle Immersion Heaters (VERSOHEX-IM-UT Range
Borel Swiss manufactures furnaces and ovens for thermal processing applications since 1927. With a team of 40 people, Borel manufactures products like standard furnaces, ovens, kilns and other equipment in Europe. Borel furnaces are used worldwide for processes such as drying, heating, heat treatment and more. Borel equipment is manufactured according to European quality and safety standards.
International Upcycling Research Network advisory board meeting 4Kyungeun Sung
Slides used for the International Upcycling Research Network advisory board 4 (last one). The project is based at De Montfort University in Leicester, UK, and funded by the Arts and Humanities Research Council.
Fonts play a crucial role in both User Interface (UI) and User Experience (UX) design. They affect readability, accessibility, aesthetics, and overall user perception.
Explore the essential graphic design tools and software that can elevate your creative projects. Discover industry favorites and innovative solutions for stunning design results.
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page pmgdscunsri
Figma is a cloud-based design tool widely used by designers for prototyping, UI/UX design, and real-time collaboration. With features such as precision pen tools, grid system, and reusable components, Figma makes it easy for teams to work together on design projects. Its flexibility and accessibility make Figma a top choice in the digital age.
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANEFebless Hernane
CapCut is an easy-to-use video editing app perfect for beginners. To start, download and open CapCut on your phone. Tap "New Project" and select the videos or photos you want to edit. You can trim clips by dragging the edges, add text by tapping "Text," and include music by selecting "Audio." Enhance your video with filters and effects from the "Effects" menu. When you're happy with your video, tap the export button to save and share it. CapCut makes video editing simple and fun for everyone!
Practical eLearning Makeovers for EveryoneBianca Woods
Welcome to Practical eLearning Makeovers for Everyone. In this presentation, we’ll take a look at a bunch of easy-to-use visual design tips and tricks. And we’ll do this by using them to spruce up some eLearning screens that are in dire need of a new look.
1. Series Big Discovery
Series Discovery
Series Europe
Series America
Series Niagara
Page
274
277
281
282
283
284
285
1- SAUNA ROOM LAYOUTS
2- SAUNA HEATERS
3- SAUNA ACCESSORIES
4- STEAM ACCESSORIES
5- STEAM ROOM LAYOUTS
6- STEAM GENERATOR
2.
3. 276
Sauna
&
Steam
Rooms
STANDARD SAUNA ROOMS
Standard sauna rooms come in different shapes and sizes, from 2 persons up to 11
persons capacity, with over 30 different designs to choose from.
Most common saunas are indoor sauna rooms. Indoor sauna rooms are more private.
It is more convenient to position the sauna near the bathroom or Jacuzzi because as
a rule, sauna requires a shower or a bath before using it.
There are four different standard designs available:
• BOX TYPE SAUNA ROOM: It is ideal for easy installation on any given space along with
its traditional box type appearance and cozy interior.
• CORNER SAUNA ROOMS: Designed to ingeniously fit in on corners of the premises
without sacrificing convenience. It reduces the needed doorway space.
• OUTDOOR SAUNA ROOMS: An exquisite scenery to a very satisfying sauna bath.
Best placed near swimming pools or bathing facilities. It stands strong to resist
nature's harsh elements with its high enduring asphalt roof and beautiful lacquered
spruce walls.
• CUSTOMIZED SAUNA ROOMS: With our expertise in building saunas, we can provide
a Customized Sauna Design that meets your expectations. Shape and size of area is
limitless as long as a proper ventilation and drainage system of the allotted area
complies with the standards of sauna. Sauna rooms will be built according to your
specifications.
Box Type Sauna
Corner Sauna
Customized Sauna
Outdoor Sauna
8. 281
19
CODE POWER
kW
DIMENSIONS
3.0
4.0
4.5
6.0
8.0
9.0
mm
2- SAUNA HEATERS
"NORDIA" SAUNA HEATER
SAUNA ROOM VOLUME
m³
MIN MAX
2
3
4
5
7
8
4
5
6
8
11
12
13
17
19.5
27
35
39
CURRENT
A
230V 1N~ 400V 3N~
6.5
9
12
13
• Zelma heavy duty Sauna Heater with stainless steel jacket, intelligent controller and
separate control box.
• Two sets of independent contacts for the thermostatic control and the thermal
cut out.
• Temperature setting 50-110°C or 122-230°F.
• Intelligent Sequential heating system, double over heat protection system for both
sauna room and sauna heater.
• LED diagnostic system, comply with the new CE standard.
• Available in 9KW, 10.5KW,12kW, 14.1kW, 16.2kW, 18kW and 20.1kW.
ND3
ND4
ND4.5
ND6
ND8
ND9
425 x 320 x 615
425 x 320 x 615
425 x 320 x 615
425 x 320 x 615
425 x 320 x 615
425 x 320 x 615
• Nordia Sauna Heater with intelligent digital controller.
• Two sets of independent contacts for the thermostatic control and the thermal
cut out.
• Temperature setting 50-110°C or 122-230°F.
• Intelligent Sequential heating system, Double over heat protection system for both
sauna room and sauna heater.
• Setting time from 0-12 hours.
• Working time: 30 minutes to 12 hours.
• LED diagnostic system.
• Available in 3kW, 4kW,4.5kW, 6kW, 8kW and 9kW.
CODE POWER
kW
CURRENT
A
DIMENSIONS
mm
"ZELMA" SAUNA HEATER
SAUNA ROOM VOLUME
m³
MIN MAX 230V 1N~ 400V 3N~
ZL9
ZL10.5
ZL12
ZL14.1
ZL16.2
ZL18
ZL20.1
9
10.5
12
14.1
16.2
18
20.1
670 x 500 x 660
670 x 500 x 660
670 x 500 x 660
670 x 500 x 660
670 x 500 x 660
725 x 565 x 675
725 x 565 x 675
Intelligent Digital Controler
2
3
4
5
7
8
4
5
6
8
11
12
13
17
19.5
27
35
39
6.5
9
12
13
WEIGHT
PACKING
kg
VOLUME
m³
1
1
1
1
1
1
1
16
17
18
19
20
21
22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
WEIGHT
PACKING
kg
VOLUME
m³
1
1
1
1
1
1
11
12
13
14
15
16
0.09
0.09
0.09
0.09
0.09
0.09
9. Thermo-hygrometer
Code:S-132
Wooden pillow
Code:S-101
Sauna stones
Code:S-169
Light cover
Code:S-158
Sauna light
Code:S-115
Sandtimer
Code:S-103
Ladle
Code:S-142
Pail
Code:S-145
A kit of sauna accessories is included with every purchase
of sauna room, containing:
1- Light Cover
2-Light
3- Wooden pillow
4- Pail & Ladle
5- Sandtimer
6-Thermo-Hygrometer
7- An appropriate electric sauna heater.
Note: it is recommended to have 2 sauna lights
in your sauna for a better ambiance.
SAUNA ROOM ACCESSORIES KIT
3- SAUNA ACCESSORIES
282
Sauna
&
Steam
Rooms
S-101 S-103 S-115
S-132 S-141
S-142 S-145 S-158
S-160 S-169
CODE DIMENSIONS
mm
W 370 x H 295
W 65 x H 340
W 135 x H 70
W 251 x H 136
Ø 232 x T 92
W 110 H 410
4 Liters
W 205 x H 294
W 298 x H 320
-
S-101
S-103
S-115
S-132
S-141
S-142
S-145
S-158
S-160
S-169
WEIGHT
PACKING
kg
VOLUME
m³
1
1
1
1
1
1
1
1
1
1
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
25
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.05
10. CODE DESCRIPTION
S-170
S-171
S-172
S-173
WEIGHT
PACKING
kg
VOLUME
m³
1
1
50
1
0.5
0.5
13
0.5
0.01
0.01
0.08
0.01
283
19
STEAM ROOMS
• Comprises seats full height glass door and its frame.
• Supplied complete with an intelligent steam generator having electronic control
with digital display, inlet nozzle and auto drain down and self flushing function.
• Parts are constructed from extra strong fiberglass reinforced MPC to ensure an
extended and trouble free service.
• Sizes can be custom made according to required dimensions, please refer to
your AQUA dealer for further details.
4- STEAM ACCESSORIES
Domed multi
section roof
Tempered safety
glass door
Aluminium door frame and
firm aluminium handles
Comfortable
seats
Steam tight seal
Steam Light
Hygrothermograph
Floor Mat 300x300mm
Thermostatic & Hydromassage Kit
S-170 S-171 S-172
S-173
12. 19
285
CODE POWER
kW
VOLTAGE
V
230
230
230/400
230/400
230/400
230/400
230/400
230/400
PHASE
1
1
1/3
1/3
1/3
1/3
1/3
1/3
13
17
8.1
10.8
14
16
19
21.8
CURRENT
A
N~
DIMENSIONS
SG-30
SG-40
SG-45
SG-60
SG-80
SG-90
SG-105
SG-120
3.0
4.0
4.5
6.0
8.0
9.0
10.5
12.0
390
390
390
390
450
450
390
390
190
190
190
190
195
195
206
260
335
335
335
335
353
353
415
415
25
25
25
25
25
25
25
25
80
80
80
80
135
135
135
135
30
30
30
30
45
45
45
45
69
69
69
69
72
72
77
77
60
60
60
60
60
60
60
60
B C
A D E F G H
mm
5- STEAM GENERATOR:
B
G
H
C
A
F
E
• A new generation steam generator with a host of advanced features.
• An extra heavy duty and robust steam generator manufactured using top quality
teflon coated incalloy elements that resist scaling combined with additional
electronics for a long trouble free working life.
• All generators feature an advanced electronic control with on board diagnostics
having a series of LEDs to show each operation of the boiler. The generator is fitted
with several heating elements that operate sequentially, from cold both elements
operate for rapid heating, when the steam room temperature is almost reached a
number of the elements drops out, and the required temperature is achieved and
maintained by the other elements alternating on and off to gently maintain the
temperature without large fluctuations improving user comfort.
• All generators feature an auto drain down with a self flushing cycle to dump the
boiler contents in a controlled manner - at the end of each steaming session the
generator will stop for a few minutes to allow the water to cool a little then the
drain valve will open and after a short time the cold water inlet valve will open to
give a period of continuous flushing and draining. Flushing and draining the boiler
reduces the buildup of damaging lime scale, cooling the elements before the final
drainage helps prolong their useful life.
• Electronic controls with a digital display to enable temperatures of 30 to 60 degrees
centigrade and time duration 15 to 240 minutes or continual operation with
additional keys for a steam room light, keyboard lock, manual drain down etc.
• Steam inlet nozzle with facility for adding essential oils.
• Safety features include boil dry protection, thermal overload safety cut out and
pressure relief valve.
• Complete with installation instructions, 12 months guarantee.
• Please note that for the commercial use of steam generators we strongly
recommend the use of softened water, to reduce the buildup of lime scale and
reduce maintenance, for additional fragrance injection please order an additional
essence dosing kit.
• All steam generators comes with the steam inlet, on-demand steam button,
intelligent digital controller & pressure relief valve.
WEIGHT
PACKING
kg
VOLUME
m³
1
1
1
1
1
1
1
1
18
19
110
111
112
113
114
115
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03