The document provides a summary of Samir Patil's career and qualifications. It outlines his 16 years of experience in electrical engineering projects, operations, and maintenance. It details his current role as Site Manager for Powerica Limited in Gujarat, India, where he oversees project planning, management, operations and maintenance of substations and transmission lines. Previously, he held roles with Suzlon Infrastructure Services including assistant manager and engineering and maintenance responsibilities.
Cassandra Walker is a mechanical engineer with nearly 20 years of experience in project management, plant engineering, and technical writing. She has held various engineering and project management roles for companies in the energy sector, including GE Power, Georgia Power, and Colonial Pipeline. Her core competencies include project management, proposal management, plant engineering, and technical writing. Her experience includes developing project plans, managing budgets and personnel, performing plant maintenance and optimization, and creating technical documentation.
Ashish Kumar has over 6 years of experience as an instrumentation and control engineer working on projects in thermal power plants, fertilizer plants, oil and gas, and hydroelectric power. He has expertise in instrumentation design, installation, commissioning, quality control, project planning, and material management. Currently he is working as an instrumentation engineer on a 3x660MW supercritical thermal power plant in Talwandi Sabo, Punjab.
This document provides a summary of an individual's experience and qualifications. It outlines over 13 years of experience in design engineering and project management in the oil and gas industry. Areas of expertise include monitoring projects, maintenance planning, cost analysis, and improving plant reliability. Previous roles include positions as a senior mechanical design engineer and project coordinator on oil and gas projects in Kuwait.
This document is a resume for Vijin Varughese, an instrumentation engineer with over 6 years of experience in project management, execution, and instrumentation of projects in the oil and gas industry. He has a B-Tech in applied electronics and instrumentation engineering and skills in project management, instrumentation, automation, and hardware products. He is seeking a position utilizing his expertise in areas like instrumentation system design, installation, testing and commissioning.
The document outlines the key skills and experience of an accomplished project engineer. It includes over 8 years of experience managing engineering, procurement, and construction projects from concept through commissioning. Specific experiences highlighted include managing projects in oil and gas, manufacturing, and water treatment sectors in Kazakhstan and India worth over $650 million total. The engineer has strengths in engineering coordination, scheduling, cost control, and ensuring projects are completed safely, on budget and on time.
This profile summarizes an experienced professional with nearly 15 years of experience in project management, engineering, procurement, installation, and commissioning. Key areas of expertise include instrumentation and control, process improvement, client relationship management, and leadership. The candidate holds a B.E. in Instrumentation Technology and has worked on projects in oil & gas for companies in Norway, Dubai, and India, managing all phases from engineering to commissioning. Current role is as a Senior Project Engineer for Proserv in Dubai.
Azharuddin S. Ansari is seeking a career opportunity as an electrical engineer, with over 6 years of experience in electrical projects and maintenance. He has worked as a senior electrical engineer and project engineer on various electrical projects, responsible for planning, execution, and commissioning of electrical works. His technical skills include electrical design, planning, maintenance, project management, and coordination with clients and contractors.
Narasimhan Venkatesh has over 10 years of experience in power systems and electrical engineering projects. He has worked on metro, utility, and commercial projects. His roles have included installation coordinator, assistant engineer, project engineer, and site engineer. He is competent in areas like installation, commissioning, maintenance, coordination, planning, and safety procedures. He currently works as an installation coordinator on the Doha Metro project in Qatar.
Cassandra Walker is a mechanical engineer with nearly 20 years of experience in project management, plant engineering, and technical writing. She has held various engineering and project management roles for companies in the energy sector, including GE Power, Georgia Power, and Colonial Pipeline. Her core competencies include project management, proposal management, plant engineering, and technical writing. Her experience includes developing project plans, managing budgets and personnel, performing plant maintenance and optimization, and creating technical documentation.
Ashish Kumar has over 6 years of experience as an instrumentation and control engineer working on projects in thermal power plants, fertilizer plants, oil and gas, and hydroelectric power. He has expertise in instrumentation design, installation, commissioning, quality control, project planning, and material management. Currently he is working as an instrumentation engineer on a 3x660MW supercritical thermal power plant in Talwandi Sabo, Punjab.
This document provides a summary of an individual's experience and qualifications. It outlines over 13 years of experience in design engineering and project management in the oil and gas industry. Areas of expertise include monitoring projects, maintenance planning, cost analysis, and improving plant reliability. Previous roles include positions as a senior mechanical design engineer and project coordinator on oil and gas projects in Kuwait.
This document is a resume for Vijin Varughese, an instrumentation engineer with over 6 years of experience in project management, execution, and instrumentation of projects in the oil and gas industry. He has a B-Tech in applied electronics and instrumentation engineering and skills in project management, instrumentation, automation, and hardware products. He is seeking a position utilizing his expertise in areas like instrumentation system design, installation, testing and commissioning.
The document outlines the key skills and experience of an accomplished project engineer. It includes over 8 years of experience managing engineering, procurement, and construction projects from concept through commissioning. Specific experiences highlighted include managing projects in oil and gas, manufacturing, and water treatment sectors in Kazakhstan and India worth over $650 million total. The engineer has strengths in engineering coordination, scheduling, cost control, and ensuring projects are completed safely, on budget and on time.
This profile summarizes an experienced professional with nearly 15 years of experience in project management, engineering, procurement, installation, and commissioning. Key areas of expertise include instrumentation and control, process improvement, client relationship management, and leadership. The candidate holds a B.E. in Instrumentation Technology and has worked on projects in oil & gas for companies in Norway, Dubai, and India, managing all phases from engineering to commissioning. Current role is as a Senior Project Engineer for Proserv in Dubai.
Azharuddin S. Ansari is seeking a career opportunity as an electrical engineer, with over 6 years of experience in electrical projects and maintenance. He has worked as a senior electrical engineer and project engineer on various electrical projects, responsible for planning, execution, and commissioning of electrical works. His technical skills include electrical design, planning, maintenance, project management, and coordination with clients and contractors.
Narasimhan Venkatesh has over 10 years of experience in power systems and electrical engineering projects. He has worked on metro, utility, and commercial projects. His roles have included installation coordinator, assistant engineer, project engineer, and site engineer. He is competent in areas like installation, commissioning, maintenance, coordination, planning, and safety procedures. He currently works as an installation coordinator on the Doha Metro project in Qatar.
Sreekanth CK is an electrical engineer with over 10 years of experience in project management, planning, execution, and commissioning of electrical systems. He has spearheaded electrical operations and maintenance functions for various companies. Some of his key skills and experiences include designing LV and HV electrical systems, estimating costs, coordinating with clients and subcontractors, and ensuring project delivery on time and within budget. He is proficient in designing, installing, and commissioning various electrical components including panels, transformers, PLC systems, and more.
Shivendra Kumar Agarwal has over 23 years of experience in project management, business development, construction management, and operations management in industries including power, oil and gas, and real estate. He is currently the Additional Vice President and Head of Project at Jindal India Thermal Power Ltd, overseeing the construction of a 3000 MW coal-based power plant. Previously he held leadership roles managing large infrastructure projects such as power plants, refineries, highways, and buildings.
This document is a resume for Sudhakar Divyapati, who has over 5 years of experience as a project manager for solar power plants and related fields. He is currently the site in-charge for a 5 MW solar power project in Bolangir, India. His responsibilities include overseeing all stages of project development from planning to commissioning. He has a background in mechanical engineering and seeks new challenging positions involving production, manufacturing, energy and related fields.
Nithya Sathyan has over 6 years of experience in instrumentation system maintenance, project engineering, reliability engineering, and commissioning. She previously worked as the Manager of Instrumentation at Reliance Industries Ltd., where she oversaw various projects including the commissioning of a 138MW combined cycle power plant. She has expertise in maintenance, testing, and commissioning of online analyzers and field instruments. Nithya is proficient in several computer systems including SAP, MS Office, and knowledgeable in standards like ISO, IEC, and Shell DEP.
Ralph Abagis has over 25 years of experience in building construction, facilities maintenance, and project management. He has worked as a cost estimator, consultant, and inspector for various government agencies. His experience includes mechanical, electrical, plumbing and other construction trades. He is proficient with cost estimating software and has security clearance to work on government projects.
Eric Zagata has over 30 years of experience in project coordination and management in the nuclear power industry. He has held roles such as Task Manager, General Superintendent, and Construction Superintendent. He has strong skills in planning, scheduling, overseeing craft workers and contractors, and ensuring safety and quality standards are met. He provides leadership and problem-solving abilities to complete large-scale modification and maintenance projects during plant outages.
Ghanshyam Khatri is a seasoned project manager with over 14 years of experience in India and the Middle East managing the execution of MEP (mechanical, electrical, and plumbing) systems projects. He is currently serving as Project Manager at Firepro Systems Pvt Ltd, overseeing a Rs. 50 crore project at the DAICEC convention center in Mumbai. Previously, he has managed large-scale residential and commercial projects valued over Rs. 200-300 crore for major real estate and infrastructure developers. Khatri has extensive expertise in planning, designing, estimating, and executing MEP systems along with commissioning and quality assurance.
This resume summarizes the qualifications and experience of Prashant B. Wani. He has over 15 years of experience in project management and process engineering. Some of the key projects he has worked on include water treatment plants, nuclear power plants, and the ITER cooling water system. He is a certified Project Management Professional with skills in areas like project planning, cost control, quality management, and stakeholder management. He has expertise in rotating equipment, piping design, and utility systems for various industrial projects.
The document provides details about D.Raja seeking an instrumentation role. It summarizes his 7+ years of experience in instrumentation for oil, gas, and power industries. Currently working as an Instrumentation and Control Engineer for a gas project in Abu Dhabi, his experiences include engineering, design, commissioning, and maintenance roles. He is proficient in various control systems and instrumentation tools.
Sk Ajibar Rahman has over 15 years of experience in facility management and MEP project management in India. He has expertise in areas such as MEP project management, site supervision, engineering support, design review, strategic planning, resource planning, contract management, construction management, and budget/cost control. Currently he works as a senior manager for MEP at a real estate developer in Pune, India where he manages MEP projects including townships with residential and commercial buildings. Previously he has worked for other facility management and engineering companies in roles such as assistant manager and senior manager.
OST Energy is an independent technical consultancy that provides advisory services across the lifecycle of renewable energy projects, including due diligence, analysis, feasibility studies, environmental and social planning, technical advisory, commercial advisory, independent technology reviews, project management, construction monitoring, and performance optimization. They have advised on over 10,000 MW of operational and under construction renewable energy projects in over 30 countries worldwide.
This document contains details about Selvakumar Swaminathan, including his personal information, education history, languages known, expected salary, objective, professional summary, and career history working on various industrial instrumentation projects. Over 23 years of experience is outlined working for companies like Thermax Ltd., Tata Honeywell, and as a freelance consultant on projects involving instrumentation engineering, detailed engineering, installation, commissioning, and maintenance of power plants, boilers, turbines, and other industrial facilities.
D. Venkatesh has over 33 years of experience in plant maintenance, maintenance planning, and managing projects in the oil and gas industry. He currently works as a Rotating Equipment Analyst for Qatargas Operating Co Ltd in Qatar. Previously, he held positions such as Maintenance Manager for Cairn India Ltd and Senior Engineer for Oryx GTL in Qatar. He has extensive experience managing maintenance for various oil and gas facilities including refineries, LNG plants, gas processing facilities, and wells.
Vikram Prabhakar has over 8 years of experience in project management, planning, quality management, and contract administration in the telecommunications industry. He has a proven track record of successfully managing complex projects while adhering to tight schedules and budgets. Some of his key responsibilities include resource planning, vendor management, quality control, and preparing project plans, schedules, and reports. He is seeking a senior management role preferably in India or abroad.
Mukhtar Ahmed Channa has over 20 years of experience in pipeline construction, maintenance, integrity, inspection and operations. He currently works as Chief Engineer of Pipeline Maintenance and Integrity at PARCO, where he supervises maintenance of crude and HSD oil pipelines. He has extensive experience in pipeline integrity management, inline inspection, and project construction. Channa also has skills in HSEQ, operations, and computer programs like MS Office, SAP and Oracle.
This document is a resume for Mamtora Harshit Vinodbhai seeking a position that utilizes his 5+ years of experience in instrumentation and control engineering. He has worked as a design engineer, application engineer, and maintenance engineer on projects involving DCS, PLC, and various field instruments. His skills include engineering documentation, automation system detailing, instrument selection and sizing, and vendor management. He is proficient in software such as AutoCAD, PLC programming, and SCADA/HMI.
Sam J. DiPasquale has over 30 years of experience in electrical engineering, project management, and nuclear operations. He has expertise in electrical design, automation, PLC programming, and CAD. Currently he works as a senior nuclear instructor and control room simulator operator at Xcel Energy in Welch, MN, where he is responsible for training nuclear operators.
Joseph E. Trader II has over 40 years of experience in major energy and manufacturing projects valued between $20 million to $4 billion dollars. He has served as a cost engineer, project engineer, electrical and I&C planner, and instrumentation technician on various fossil, nuclear and manufacturing projects. His experience includes developing work breakdown structures, tracking project costs, reviewing change orders, and ensuring milestone completion. He is proficient in project management software like Primavera, Prolog, Prism, and Microsoft Project.
Bruce Kain is an experienced pipeline professional seeking opportunities in pipeline construction, safety, management, and inspection. He has over 30 years of experience in the petroleum and gas pipeline industry, including extensive experience in construction management, operations, maintenance, regulatory compliance, and public relations. His background reflects leadership roles with multiple pipeline and construction companies, as well as serving as a Senior Utilities Engineer for the Virginia State Corporation Commission regulating pipeline safety.
This document discusses different types of bearings used in mechanical engineering. It describes bearings as machine components that support another element and allow relative motion while carrying a load. There are two main types - sliding contact bearings and rolling contact bearings. Rolling contact bearings, also called anti-friction bearings, use balls or rollers between elements and have lower coefficients of friction than sliding contact bearings. The document further details types of rolling contact bearings like ball bearings, roller bearings, and their construction and applications.
A transformer transfers electrical energy from one circuit to another through electromagnetic induction. It works by using two coils - a primary winding that receives energy from an alternating current source, and a secondary winding that delivers energy to a load. As the magnetic field in the primary coil fluctuates, it induces an alternating voltage in the secondary coil. This allows the transformer to increase or decrease voltage levels while keeping frequency constant. Common transformer types include power transformers used in electrical equipment and autotransformers with a single winding and movable tap to select different output voltages.
Sreekanth CK is an electrical engineer with over 10 years of experience in project management, planning, execution, and commissioning of electrical systems. He has spearheaded electrical operations and maintenance functions for various companies. Some of his key skills and experiences include designing LV and HV electrical systems, estimating costs, coordinating with clients and subcontractors, and ensuring project delivery on time and within budget. He is proficient in designing, installing, and commissioning various electrical components including panels, transformers, PLC systems, and more.
Shivendra Kumar Agarwal has over 23 years of experience in project management, business development, construction management, and operations management in industries including power, oil and gas, and real estate. He is currently the Additional Vice President and Head of Project at Jindal India Thermal Power Ltd, overseeing the construction of a 3000 MW coal-based power plant. Previously he held leadership roles managing large infrastructure projects such as power plants, refineries, highways, and buildings.
This document is a resume for Sudhakar Divyapati, who has over 5 years of experience as a project manager for solar power plants and related fields. He is currently the site in-charge for a 5 MW solar power project in Bolangir, India. His responsibilities include overseeing all stages of project development from planning to commissioning. He has a background in mechanical engineering and seeks new challenging positions involving production, manufacturing, energy and related fields.
Nithya Sathyan has over 6 years of experience in instrumentation system maintenance, project engineering, reliability engineering, and commissioning. She previously worked as the Manager of Instrumentation at Reliance Industries Ltd., where she oversaw various projects including the commissioning of a 138MW combined cycle power plant. She has expertise in maintenance, testing, and commissioning of online analyzers and field instruments. Nithya is proficient in several computer systems including SAP, MS Office, and knowledgeable in standards like ISO, IEC, and Shell DEP.
Ralph Abagis has over 25 years of experience in building construction, facilities maintenance, and project management. He has worked as a cost estimator, consultant, and inspector for various government agencies. His experience includes mechanical, electrical, plumbing and other construction trades. He is proficient with cost estimating software and has security clearance to work on government projects.
Eric Zagata has over 30 years of experience in project coordination and management in the nuclear power industry. He has held roles such as Task Manager, General Superintendent, and Construction Superintendent. He has strong skills in planning, scheduling, overseeing craft workers and contractors, and ensuring safety and quality standards are met. He provides leadership and problem-solving abilities to complete large-scale modification and maintenance projects during plant outages.
Ghanshyam Khatri is a seasoned project manager with over 14 years of experience in India and the Middle East managing the execution of MEP (mechanical, electrical, and plumbing) systems projects. He is currently serving as Project Manager at Firepro Systems Pvt Ltd, overseeing a Rs. 50 crore project at the DAICEC convention center in Mumbai. Previously, he has managed large-scale residential and commercial projects valued over Rs. 200-300 crore for major real estate and infrastructure developers. Khatri has extensive expertise in planning, designing, estimating, and executing MEP systems along with commissioning and quality assurance.
This resume summarizes the qualifications and experience of Prashant B. Wani. He has over 15 years of experience in project management and process engineering. Some of the key projects he has worked on include water treatment plants, nuclear power plants, and the ITER cooling water system. He is a certified Project Management Professional with skills in areas like project planning, cost control, quality management, and stakeholder management. He has expertise in rotating equipment, piping design, and utility systems for various industrial projects.
The document provides details about D.Raja seeking an instrumentation role. It summarizes his 7+ years of experience in instrumentation for oil, gas, and power industries. Currently working as an Instrumentation and Control Engineer for a gas project in Abu Dhabi, his experiences include engineering, design, commissioning, and maintenance roles. He is proficient in various control systems and instrumentation tools.
Sk Ajibar Rahman has over 15 years of experience in facility management and MEP project management in India. He has expertise in areas such as MEP project management, site supervision, engineering support, design review, strategic planning, resource planning, contract management, construction management, and budget/cost control. Currently he works as a senior manager for MEP at a real estate developer in Pune, India where he manages MEP projects including townships with residential and commercial buildings. Previously he has worked for other facility management and engineering companies in roles such as assistant manager and senior manager.
OST Energy is an independent technical consultancy that provides advisory services across the lifecycle of renewable energy projects, including due diligence, analysis, feasibility studies, environmental and social planning, technical advisory, commercial advisory, independent technology reviews, project management, construction monitoring, and performance optimization. They have advised on over 10,000 MW of operational and under construction renewable energy projects in over 30 countries worldwide.
This document contains details about Selvakumar Swaminathan, including his personal information, education history, languages known, expected salary, objective, professional summary, and career history working on various industrial instrumentation projects. Over 23 years of experience is outlined working for companies like Thermax Ltd., Tata Honeywell, and as a freelance consultant on projects involving instrumentation engineering, detailed engineering, installation, commissioning, and maintenance of power plants, boilers, turbines, and other industrial facilities.
D. Venkatesh has over 33 years of experience in plant maintenance, maintenance planning, and managing projects in the oil and gas industry. He currently works as a Rotating Equipment Analyst for Qatargas Operating Co Ltd in Qatar. Previously, he held positions such as Maintenance Manager for Cairn India Ltd and Senior Engineer for Oryx GTL in Qatar. He has extensive experience managing maintenance for various oil and gas facilities including refineries, LNG plants, gas processing facilities, and wells.
Vikram Prabhakar has over 8 years of experience in project management, planning, quality management, and contract administration in the telecommunications industry. He has a proven track record of successfully managing complex projects while adhering to tight schedules and budgets. Some of his key responsibilities include resource planning, vendor management, quality control, and preparing project plans, schedules, and reports. He is seeking a senior management role preferably in India or abroad.
Mukhtar Ahmed Channa has over 20 years of experience in pipeline construction, maintenance, integrity, inspection and operations. He currently works as Chief Engineer of Pipeline Maintenance and Integrity at PARCO, where he supervises maintenance of crude and HSD oil pipelines. He has extensive experience in pipeline integrity management, inline inspection, and project construction. Channa also has skills in HSEQ, operations, and computer programs like MS Office, SAP and Oracle.
This document is a resume for Mamtora Harshit Vinodbhai seeking a position that utilizes his 5+ years of experience in instrumentation and control engineering. He has worked as a design engineer, application engineer, and maintenance engineer on projects involving DCS, PLC, and various field instruments. His skills include engineering documentation, automation system detailing, instrument selection and sizing, and vendor management. He is proficient in software such as AutoCAD, PLC programming, and SCADA/HMI.
Sam J. DiPasquale has over 30 years of experience in electrical engineering, project management, and nuclear operations. He has expertise in electrical design, automation, PLC programming, and CAD. Currently he works as a senior nuclear instructor and control room simulator operator at Xcel Energy in Welch, MN, where he is responsible for training nuclear operators.
Joseph E. Trader II has over 40 years of experience in major energy and manufacturing projects valued between $20 million to $4 billion dollars. He has served as a cost engineer, project engineer, electrical and I&C planner, and instrumentation technician on various fossil, nuclear and manufacturing projects. His experience includes developing work breakdown structures, tracking project costs, reviewing change orders, and ensuring milestone completion. He is proficient in project management software like Primavera, Prolog, Prism, and Microsoft Project.
Bruce Kain is an experienced pipeline professional seeking opportunities in pipeline construction, safety, management, and inspection. He has over 30 years of experience in the petroleum and gas pipeline industry, including extensive experience in construction management, operations, maintenance, regulatory compliance, and public relations. His background reflects leadership roles with multiple pipeline and construction companies, as well as serving as a Senior Utilities Engineer for the Virginia State Corporation Commission regulating pipeline safety.
This document discusses different types of bearings used in mechanical engineering. It describes bearings as machine components that support another element and allow relative motion while carrying a load. There are two main types - sliding contact bearings and rolling contact bearings. Rolling contact bearings, also called anti-friction bearings, use balls or rollers between elements and have lower coefficients of friction than sliding contact bearings. The document further details types of rolling contact bearings like ball bearings, roller bearings, and their construction and applications.
A transformer transfers electrical energy from one circuit to another through electromagnetic induction. It works by using two coils - a primary winding that receives energy from an alternating current source, and a secondary winding that delivers energy to a load. As the magnetic field in the primary coil fluctuates, it induces an alternating voltage in the secondary coil. This allows the transformer to increase or decrease voltage levels while keeping frequency constant. Common transformer types include power transformers used in electrical equipment and autotransformers with a single winding and movable tap to select different output voltages.
The document is a presentation on bearings created by Akash Panchal. It discusses the definition of a bearing, provides a brief history, and examines various types of bearings like ball bearings, roller bearings, plain bearings, and their functions. It also looks at bearing selection, arrangement, lubrication, and life calculation. The presentation contains several diagrams and is intended to provide an overview of bearings.
Bearings are used to support rotating shafts and come in different types depending on whether they are designed to withstand axial thrusts, radial loads, or both. The main bearing types are ball bearings, which use spheres, and cylindrical roller bearings, which use cylinders, with each type having different capacities for loads and misalignment. Deep groove ball bearings can withstand both radial and axial loads, while angular contact ball bearings have increased axial load capacity and self-aligning ball bearings are very tolerant of misalignment.
Presentation about transformer and its types M Tahir Shaheen
- A transformer is a static device that changes electrical power at one voltage level into electrical power at another voltage level through magnetic induction. It does not change the frequency.
- There are two main types of transformers: step-up transformers, which increase voltage, and step-down transformers, which decrease voltage. This is achieved by varying the number of turns in the primary and secondary coils.
- Transformers work on the principle of mutual induction. A changing magnetic field induced by alternating current in the primary coil induces a voltage in the secondary coil.
- A transformer is a static device that converts alternating current voltages to different voltages while keeping frequency the same through electromagnetic induction.
- It works on the principle of mutual induction between two coils - an alternating current in the primary coil induces an alternating voltage in the secondary coil.
- Transformers are used extensively in power transmission to increase voltage for long distance transmission lines and then reduce voltage for safe distribution, as well as in electronics to step down voltages for low-voltage circuits.
The document discusses transformers, including their construction, principle of operation, types (step-up and step-down), applications, and history. A transformer is a device that changes alternating current voltages through inductive coupling between two coils. It consists of a primary coil, secondary coil, and iron core. The principle is based on Faraday's law of induction. Transformers are used to increase or decrease voltages for power transmission or electronic devices and were an important development in the history of electricity.
Rolling element bearings transmit loads through rolling contact and provide lower coefficients of friction than sliding contact bearings. They are composed of an inner race, outer race, rolling elements (balls or rollers), and a cage. Ball bearings are further classified as deep groove, angular contact, or filled notch types. Roller bearings use cylindrical or tapered rollers and have higher load capacity than ball bearings. Bearing life is rated based on the number of revolutions or hours it can operate before spalling or pitting failure occurs, with an L10 life rating meaning 10% of tested bearings will fail by that point.
The document discusses distribution transformers, including their testing, maintenance, and protection. It provides details on routine tests, type tests, and special tests performed on transformers according to standards. These tests check various parameters like winding resistance, insulation levels, voltage ratios, losses, and short circuit withstand ability. The document also outlines maintenance procedures like regular oil testing, insulation resistance checks, bushing cleaning, and temperature monitoring. Proper preventive maintenance is emphasized to prevent failures caused by issues like low oil levels, water ingress, overloading, and poor design/workmanship.
A transformer is a static device that changes alternating current (AC) at one voltage level to AC at another voltage level through electromagnetic induction. It consists of two coils, the primary and secondary windings, wrapped around a laminated iron core. When an alternating current is applied to the primary winding, it produces an alternating magnetic field that induces a voltage in the secondary winding. This allows the transformer to step up or step down voltages without changing the frequency. The transformer transfers power between its two coils through electromagnetic coupling between the coils wound around the iron core.
Ajay Kumar is seeking a new position with over 6 years of experience in project management and power transmission and distribution. He holds a B.Tech in Electronics and Instrumentation and is currently employed as an Executive with Torrent Power Ltd. in Agra. His skills include planning, scheduling, and monitoring HT and LT networks, as well as commercial and operational responsibilities like load distribution, equipment maintenance, and reducing downtime. Previously he worked as a Senior Project Engineer for A2Z Maintenance & Engineering Services Ltd. where he managed electrification, maintenance, and renovation projects.
The document provides details about an electrical engineer with over 5 years of experience in quality assurance, quality control, commissioning, design, operation and maintenance roles. It includes a profile summary highlighting leadership and business development skills. The career timeline section then lists previous roles with companies like L&T Hydrocarbon Engineering, Southern Petrochemical Industries Corporation, and Igloo Dairy Services private limited, as well as responsibilities and highlights from these positions. Core competencies include operation and maintenance, business development, testing and commissioning, and quality analysis.
Bharath V provides his curriculum vitae for the role of an instrumentation, erection, and commissioning engineer with over 11 years of experience. He has worked on various process and industrial automation projects in India and Qatar. Some of his responsibilities have included project management, installation, testing, and commissioning of instrumentation equipment, field instruments, control systems, and ensuring projects are completed on time and on budget. He also lists his educational qualifications and technical skills which include experience with DCS systems, industrial communications protocols, and commissioning various types of field instruments.
Ketan Shah is an experienced engineer with over 30 years of experience in construction and maintenance of electricity transmission projects in India. He has extensive experience planning, executing, and managing EPC power projects from start to finish, including constructing EHV substations and transmission lines on time and on budget. He also has a proven track record of developing new processes, cutting costs, and ensuring safety and quality standards are met on all projects.
Chandra Mouli Singisetti has over 8 years of experience in project execution, management, operation and maintenance of electrical systems. He is currently working as an Associate Manager - Electrical at Delhi International Airport Limited, where he is responsible for the operation and maintenance of substations, switchyards, generators and the power distribution network across two airport terminals. Prior to his current role, he was involved in executing electrical projects including substations for airfield lighting, terminal buildings, utility plants and landside facilities. He has expertise in planning preventative maintenance schedules, conducting failure analysis, and ensuring high system availability.
Sivanesan has over 8 years of experience in power projects up to 600MW thermal power plants and 400kV substations. He is currently a Project Engineer for a 230kV substation in Abu Ali, Saudi Arabia, worth 197 million Saudi riyals, where he leads multi-disciplinary teams and manages project execution from design to commissioning. Previously, he has worked on multiple power projects in India worth over 300 million rupees, managing electrical installation, testing, and commissioning activities. Sivanesan holds a B.E in Electrical and Electronics Engineering and is proficient in project planning, procurement, and client coordination.
Waseem Sami Qasim Odeh is a senior electrical engineer with over 16 years of experience in electrical engineering and project management. He has successfully managed various LV and MV electrical projects in infrastructure, commercial buildings, and residential developments. Currently he is a senior electrical engineer for PARSONS-SAPL Consultant in KSA, overseeing the MOH-Qateef Al-Badrani Project valued at 133 million SAR. He is competent in all aspects of electrical engineering including design, planning, estimating, installation, testing and commissioning. He aims to take on a more challenging senior engineer role with a reputable company.
Gaurav Shukla has over 6 years of experience in project coordination and management. He has worked as a Project Engineer and Manager for Reliance Infrastructure Ltd. on large power plant projects. Some of his responsibilities have included monitoring material and contractor requirements, contract administration, scheduling, and ensuring timely deliverables. He also supported commissioning activities and coordinated between multiple stakeholders. Currently, he is seeking a new position that allows him to continue progressing in his career and developing his management skills.
This document is an resume for Ankit Agarwal, an electrical engineer seeking project management roles. It summarizes his 10 years of experience managing electrical and metro projects, including his current role managing the power supply and SCADA systems for the Navi Mumbai Metro Line 1 project. It also lists his core competencies and details his professional experience with various companies, highlighting projects he has successfully executed.
This document provides a summary of an electrical engineer's qualifications. It outlines the engineer's 6 years of experience in areas like power distribution, transmission, transformers, and project management. Current responsibilities as a Projects Engineer include inspection, commissioning electrical equipment, preparing drawings and estimates, and coordinating with contractors. Previous roles include working as an Electrical Engineer and Assistant Project Engineer on projects in Dubai, Sharjah, and Pakistan. The engineer holds a B.E. in Electrical Engineering and has skills in AutoCAD, VFD programming, Microsoft Office, and hardware/software installation.
Lakhdeep Singh is seeking an entry-level position in project management. He has over 4 years of experience managing electrical distribution projects in India. His experience includes project planning, monitoring timelines and budgets, coordinating with contractors and clients, and ensuring safety compliance. He holds a B.Tech from Punjabi University and has skills in areas like survey, design, material management, and cost analysis.
Over 23 years of' experience as Planning / Contracts / Project Engineer & Manager, Oil & Gas onshore & Offshore projects. predominantly in EPC Projects Planning and Project Management, includes engineering (Basic, FEED and Detailed), Procurement and Construction
The document provides a summary of the author's experience working as an Interface Planning Engineer for Abu Dhabi Marine Operating Company in the United Arab Emirates. It lists several major oil and gas projects the author worked on involving modifications, replacements, and additions to offshore oil production facilities in the Zakum oil field to increase production capacity. These projects had budgets in the hundreds of millions of US dollars. The document also provides the author's responsibilities and roles in project planning, scheduling, procurement, and ensuring interface between projects, contractors and other departments.
Santanu Sasmal is seeking assignments in project management or plant engineering with reputable organizations. He has over 8 years of experience in inspection, erection, testing, commissioning and maintenance of electrical switchgears and field equipment. Currently an Assistant Manager at Danieli India Ltd since 2013, his responsibilities include reviewing quality assurance plans, inspecting and testing plant equipment, coordinating with projects and vendors, and identifying and resolving quality issues. Previously he worked at M.N Dastur & Company and Shree Renuka Sugars Limited, where he was responsible for inspecting major electrical equipment for various projects in India and abroad, and performing project activities such as overseeing contractors and commissioning turbine generators and transformers.
Samrat R Khanorkar is seeking a position in project management with over 10 years of experience managing capital projects in industries like power generation, steel, and infrastructure. He has strong skills in project controls, business transformation, process optimization, and ensuring timely completion of large projects. His experience includes roles at EY, Accenture, Adani Power, Tata Projects, and Indo Rama Synthetics, where he led teams and delivered various projects on schedule and budget.
Aryashree Karmabir Samal has over 16 years of experience in project management, supply chain management, and business development. She currently works as an Assistant General Manager at Jindal Steel & Power Ltd, where she is responsible for planning, monitoring, and coordinating a complex PMO setup. Previously, she has worked on electrical projects, vendor selection and negotiations, and strategic marketing for power plant projects. She holds an MBA in Operations and a BE in Electrical Engineering.
Malikjan B. Nadaf is an electrical engineer with over 5 years of experience in property management, electrical maintenance, project engineering, and testing and commissioning. He is currently an Assistant Property Manager at Cushman & Wakefield managing a 5.6 lakh sqft property, overseeing MEP systems operations and maintenance. Prior to this, he worked as a Technical Manager at Absotherm Facility Management and as a Project Engineer for Kanakashri Electricals on various power distribution projects worth over Rs. 5 crores. He holds a Diploma and B.E. in Electrical and Electronics Engineering.
Binay Kumar is an electrical and electronics engineer with over 2.8 years of experience in project management and coordination (PMC). He has expertise in planning, executing, and managing all aspects of projects from the initial planning stages through completion, ensuring they are finished on time and within budget. Some of the projects he has worked on include ones for Reliance Footprint Ltd. in Assam and IBM India Pvt. Ltd. in Kolkata. He aims to reduce downtime and optimize operational effectiveness and efficiency.
This CV summarizes the qualifications and experience of Mr. Pugazhenthi Mathuramuthu as a project manager for Qatar Power Transmission System Expansion – Phase 11. He has over 16 years of experience in electrical engineering and project management. His most recent role was as a Project Manager at Energoprojekt-Entel Ltd. in Qatar since 2015, where he is responsible for managing projects, budgets, and stakeholder relationships. He has extensive experience managing transmission and substation projects in Saudi Arabia, UAE, and Qatar.
Gourav Chouhan is an electrical, mechanical, and instrumentation project and maintenance professional seeking a senior managerial position. He has over 9 years of experience in various industries and holds a certificate of appreciation from Saudi Aramco. He is proficient in SAP, Microsoft Office, and other software and has experience in planning, scheduling, and executing maintenance and projects.
1. Samir R Patil
Mobile: +91-9881215798 E-Mail: psmir1976@gmail.com, Skype ID: psmir1976
Assignments in:
Operations & Maintenance • Electrical Project Management
CAREER SNAPSHOT
Highly Competent, diligent and result oriented Electrical Engineer offering
16 years of experience in operation & Maintenance as well as Project;
A “Performance Driven Professional” in Operation & Maintenance (WTG,
Substation & HV/EHV lines), Project Management, Relationship Management,
Man-Material Management, Technical Documentation, Contractor Audit, Bill
Reconciliation , Techno-commercial Dealing, Quality and Testing, Operations
& Maintenance, Installation & Commissioning and Team Management in
Electrical domain.
Currently associated with Powerica Ltd, as a site Manager Gujarat
Previously known as Suzlon infrastructure Pvt. Ltd, Maharashtra as
Assistant Manager.
Previously associated with Sugar Factory Pvt. Ltd. As Utility engineer.
Demonstrated capabilities in handling the entire domain of project
management activities – Project planning and scheduling, resource
mobilization and deployment, testing, commissioning,
Proven skills to design effective plans and execute preventive maintenance
break down maintenance and shut down maintenance schedule. Proficient in
Trouble Shooting and sensitizing workforce on need of industrial safety &
observing safety standards.
Replacement, refurbishment, start up, shut down & emergency operations.
Recognized as a hands-on, proactive professional who can rapidly identify
problems, formulate tactical plans, initiate change and implement effective programs in challenging and diverse
environments. Excellent man-management, time management, and leadership skills.
PROFESSIONAL EXPERIENCE
Since Feb 15 Powerica Limited Mumbai, Site Manager, Gujarat OMS in charge.
Key Result Areas:
OMS, Project Planning, & Management
Planning, monitoring & controlling entire project schedules for meeting the very short contractual deliveries of the
project
Formulating schedules for all engineering activities involved in project considering the scope and client
requirements.
Executing the process of project tracking and communicating & negotiating with client, internal business
partners, top management and with project core team.
Doing system study, PCN preparation of 11KV, 33KV, 66 KV, 132KV, Utility network.
Coordinating with consultant/design team for the rating & layout of various substation equipments in AUTOCAD
Preparation of GTP for the products such as Transformers, Insulator, Isolator, CT, PT, VCB, LA, Control Panels
etc.
Calling quotation & short listing vendors/subcontractors based on their rate, payments terms and past project for
materials & services.
Allocations of Jobs as per Project Plan to Vendors, Suppliers &Sub Contractors
Preparation of Purchase Order for supply of materials & services.
Coordination & Follow up with suppliers to ensure the availability of material onsite without delay
Review current status of both Engineering and Procurement for the Project and prepare a revised detailed
schedule incorporating the physical status.
Liaison with Sub-Contracts for execution of project in time & within cost estimates.
Conducting walk over survey of the project with special focus to probable inhibiting factors like terrain, ROW issue
and keeping in mind the project mobilization.
Understanding various requirements for preparation / submission of offers for supply of towers / monopoles /
turnkey lines for Pvt. / Semi Govt. / Govt. departments
Leading a team of engineers and technicians for Installation & Supervision of Substation Equipments like CB, CT,
CVT, Isolators, LA, Substation Auxiliary Equipments (battery, chargers, AC/DC boards), Transformers, Cable
(U/G cables) installation, Control & Protection Equipments.
Operations & Maintenance
Relationship Management
Technical Documentation
Project Management
Costing
Inspection & Testing
Quality Assurance
Process Enhancements
Erection & Commissioning
Team Management
2. Collection and collation of data of local vendors including supplier of local gangs/sub contractor. Study of
material/quantity estimation for foundation, erection, stringing for transmission line as well as substation execution
etc..
Monitoring daily progress of project through primavera or MS project & update to management
Proactively followed-up of material requirements at site and managed site material stock and coordinated with
vendors and contractor for MR, GRIR (Goods Receipt Cum Inspection Report) and DC.
Testing of Transformer, CT, PT, VCB, LA, Isolators etc before charging
Handling both Client and vendors for smooth work progress at site day to day basis.
Coordinating with various departments for timely execution of project.
Ensuring smooth project closure activities like surplus material, resources reconciliation, commissioning certificate,
contractor retention money etc.
Successfully participated in Job Safety Analysis (JSA) process and review conclusions.
Engaged in hazard identification and risk assessment (HIRA) analysis and ensured that all records/logs/certificates
are maintained and updated to provide evidence of terminal conformance to Suzlon infrastructure Ltd. standards.
Actively participated in SIQA review process, testing and official witness acceptance of construction and vendor
modifications, electrical maintenance priorities, vendor performance and repair tracking system.
Planning and effecting routine / predictive / preventive / corrective overhauling maintenance schedules of WTG
(Vesta & Suzlon), 33 KV lines, Sub-Station 66KV/33KV, various equipment’s (transformer & Breakers) to increase
Grid up time and reliability.
Involved in Planning, Engineering, Construction, Erection, Testing, pre commissioning and Commissioning 66 KV,
33 KV power transmission tower and pole lines including HT feeder bays for all EPC wind farm projects.
Maintenance of 66KV, 33KV line as per schedule & rectification of feeder brake down.
Planning and effecting routine / predictive / preventive / corrective overhauling maintenance schedules of WTG
(Vesta & Suzlon), 33 KV lines, Sub-Station ,66KV/33KV, various equipment’s (transformer & Breakers) to increase
Grid up time and reliability.
EB liaisoning in Gujarat state (Preparation of Monthly generation with GEDA).
Preparation of DGR & performance report.
Man Management
Directing and leading the technical personnel; imparting continuous on job training to the workforce for
accomplishing greater operational effectiveness / efficiency.
Working on talent pool and succession planning of the management cadre and workforce, appraising their KRA
based performance and providing feedback on the same.
Relationship Management
Liasoning with clients, consultants, contractors & external agencies for determining technical specifications and
obtaining approvals.
Liasoning with state government bodies for the power evacuation approvals
Acting as an interface between various in-house departments with a view to ensure smooth execution of projects.
Follow up with suppliers for dispatch of materials as per delivery period, Order processing to manufacturing
units/ accounts, Co-ordination with customers, Co-ordination with factory/ suppliers for dispatches.
Significant Highlights:
Key Projects executed:
Powerica Limited..
Place Goinj. Tal –Jam- Khambaliya, Dist- Devbhoomi dawrka.
Project capacity 30MVA - 66KV/33KV Substation, 12KM - 33KV pole line, DCOH & MCOH transmission n/w
Role Site Manager.
PREVIOUS EXPERIENCE
SUZLON INFRASTRUCTURE SERVICES PVT. LTD from JULY ’07 to JAN ’15 (7.6yrs) as an Sr. Engineer –
O&M(HV/EHV in charge Dhule area)
Key Result Areas:
Operations & Maintenance
Planning and effecting predictive & preventive maintenance schedules for various equipment / lines to increase
machine up time & equipment reliability.
Implementing maintenance schedules and carrying out periodic checks to ensure performance of various
equipment and maintaining requisite documents for the same.
Identifying areas of obstruction / breakdowns and taking steps to rectify the equipment through application of
troubleshooting tools.
3. Engineering, Construction, Erection, testing and commissioning of HT and LT Feeder Bays at 220/66/33KV
Voltage levels includes Equipment’s like CT, PT, LA, CB, Line and Bus Isolators, Bus Gantries I.e. Main Bus and
Transfer bus, Controls and Relay Panels, Circuit Breakers, Relays Testing and Coordination, Transformers, in
220/66 KV Substations
Preparation of Monthly HT/EHV Reports, Preparing Monthly progress & performance report with new
initiatives & challenges
NCR/Order/Reservation management-SAP system
Conducting Internal (PDCA) Audits at different sites/Sub Stations of Suzlon
PDCA ( ISO 9001/ISO 14001/OHASA18001)/DNV audit NC closure / CAPA entry in SAP system
Preparation of Joint Meter reading & raise customer invoice with MSETCL/DCL/GEDA/SLDC.
Planning of HT Line & Sub-Station maintenance schedule and peak wind performance plan.
Analyse day to day performance of WTG & plan the schedule/unscheduled inspection
Preventive and breakdown maintenance of 200 WTGs (1500KW & 2100KW IGBT controlled ELECTRICAL
PITCHING
Co-ordinates with customer about uploading generation details on daily basis, preparation of invoice, share
certificate on monthly basis etc
Liaison with Govt.( MSETCL/DCL/EB/GEDA/CEIG) and external agency (Customer)
Man Management
Directing and leading the technical personnel; imparting continuous on job training to the workforce for
accomplishing greater operational effectiveness / efficiency.
Working on talent pool and succession planning of the management cadre and workforce, appraising their KRA
based performance and providing feedback on the same.
Relationship Management
Liasoning with clients, consultants, contractors & external agencies for determining technical specifications and
obtaining approvals.
Follow up with suppliers for dispatch of materials as per delivery period, Order processing to manufacturing
units/ accounts, Co-ordination with customers, Co-ordination with factory/ suppliers for dispatches.
Significant Highlights:
Professional experiences in maintenance of 220KV/66KV/ 33KV substation.
Professional experience in operation and maintenance, testing & commissioning of 33KV HT yard, including
transformer, VCB, CT, PT and LA.
Professional experiences in maintenance of various capacity of three phase motors, three phase induction
generator up to 1.25MW in different hazardous area.
Instrumental in monitoring & ensuring safe operation of the electrical equipment both from field and control room
Professional experience in PLC, SCADA, DCS and VFD, Hands-on experience in commissioning, operation,
maintenance and testing of control systems & conditioning monitoring and Commissioning and of various Mega
Watt series Wind Turbine Generators.
Dexterous in preparing and maintaining checklists and formats for ISO-14001.
Key player in scheduling and planning of all site activities.
Good working Knowledge with respect to Control systems and field instruments.
Feedback to design/R&D for product optimization, improvement and Value engineering
Responsible for spare inventory and management for the site instruments.
Responsible for maintain History card and manuals of instruments.
Legal compliance as per IE ACT
Training Imparted on Safety induction , permit to work training ,LOTO( Lock out tag out),Electrical safety
Co-ordination For PPE required for Electrical safe work with store and HSE Dept.
Monitoring of electrical unsafe condition /area of improvement.
Quality & Process Enhancement
Taking stringent quality measures including preparation of necessary documents to ensure compliance with
various quality standards.
Identifying scope for planning & implementing technological changes to enhance the overall operational
efficiency.
Implementing various techniques for cycle time / cost reduction, entailing identification of opportunities,
analysis of data, conducting tests, cost benefit analysis and implementation.
Documentation; Compilation, collation and analysis of monthly reports. Overseeing preparation of necessary
documents as per regulatory requirement.
4. Erection & Commissioning
Installation and commissioning of WTG & Sub-Station voltage level is 220KV/33KV & 66KV/33KV as well as
conducting tests & inspections to ensure operational effectiveness.
Reviewing engineering drawings, technical specifications, cost estimates for installation & commissioning of
equipment; reviewing & analysing contractor's change order proposals & submittals.
TRAININGS ATTENDED:
OHSAS (Occupational Health & Safety Assessment Series).
QMS (Quality management System)
SAP (PM & CS module)
Electrical safe work practices
Basic First Aid training
Fire Fighting Skills
PRIFESSIONAL CERTIFICATION:
Received “Certificate of Life Saver” from Nisha Fire Equipment
Knowledge about DNV audit Relative Documentation
2) SUGAR INDUSTRIES from 1998 to June 2007 as a Utility Engineer
Key Responsibilities
Operations & Maintenance
Responsible for 11KV/440V switch yard, Transformer maintenance & AB switch Maintenance
Preparation of seasonal preventive maintenance of all type of induction motor up to 0.5HP to 250 HP
Responsible for effective execution of preventive maintenance
Inventory Management To indent & follow up the engineering spares to maintain minimum inventory
Execution of planned shutdown Jobs, execution of minor modification in sugar plant.
Coordinating with the production department and providing the necessary utilities as per the requirements
Preventive & Breakdown Maintenance of various sizes of Motors in boiler section & other areas of in production
section
Panels’ erection and commissioning such as MCC panel & various size of static & Rotatic equipments. Their
testing, fault identification and rectify the fault. Its related relay testing and parameters settings
Lightening of plant.
Operation & Maintenance of 2.5 MW power Generator set (steam turbine + Kirloskar 2.5 MW Gen.)
DG Seat maintenance (315KV).
Seasonal maintenance of 40tone Thermax make boiler with Boiler inspector visit.
Preparation of G7 reading.
EDUCATIONAL QUALIFICATIONS
1998 Diploma in Electrical Engineering (DEE) with 61.22% from G. M. Chaudhari polytechnic
College Shahada 425409 ( MSBTE University)
1994 HSC with 50.00% from V.K. Shah Vidya Mandir Shahada 425409
1992 SSC with 62% from Sarvoday Vidya Mandir Shahada-425409
5. Having certified Electrical Supervisor certification authorized by Maharashtra Electricity Board
Software Proficiency
MS Office Programming Languages – C & Assembly language programming Micro Processor/controllers -
8085/8051/PIC16f877A Operating systems Windows XP/2000/Vista , PLC & AC DRIVES PROGRAMMING
PERSONAL DOSSIER
1. Date of Birth : 4th January 1976
2. Marital Status : Married
3. Hobbies : Playing Cricket, Reading
4. Passport No : E8099742
5. Electrical supervisor License No.- 51207
DECLARATION:
I hereby affirm that information provided in this document is accurate and true to best of my knowledge
Place:
Date: Samir Patil