The document provides details on Robert Mitchell's qualifications, certifications, training, experience, and projects worked on. It outlines his extensive experience in non-destructive testing including ultrasonic testing, magnetic particle inspection, and dye penetrant inspections. It also details his qualifications and experience in welding inspection, supervision, and metallurgy. A variety of international and Australian projects are listed that involved roles such as inspection manager, senior NDT technician, and welding supervisor.
Resume of jaison varkey QA/QC Inspector welding,coatingjaison varkey
I have over 11 years of work experience as QA/QC Inspector in Oil and Gas fields both offshore and onshore Construction and installations. focus on PQT/PQR, WQT, NDT, Destructive testing, Inspections of welding and Filed joint coating of Subsea Pipelines, Risers, Tie‐in spools, lateral joints, Jackets, Topside, and Pile pipes. Installation inspection of Pile driving, SPM, PLEMs, I&J tubes, Jackets & top sides.
Resume of jaison varkey QA/QC Inspector welding,coatingjaison varkey
I have over 11 years of work experience as QA/QC Inspector in Oil and Gas fields both offshore and onshore Construction and installations. focus on PQT/PQR, WQT, NDT, Destructive testing, Inspections of welding and Filed joint coating of Subsea Pipelines, Risers, Tie‐in spools, lateral joints, Jackets, Topside, and Pile pipes. Installation inspection of Pile driving, SPM, PLEMs, I&J tubes, Jackets & top sides.
4 Cofferdams (Temporary Works) Risk Assessment Templates
Planned Cofferdam excavation in areas where live services may be present including:
• Electrical;
• Water;
• Sewerage;
• Gas;
• Telecoms;
PRIOR TO WORKS
Cofferdam Design under Temporary Works
Cofferdam excavation
Cofferdam sheet piling
Lifting operations
Confined space working – cofferdam
Installation of wales, bracing etc.
Maintenance of cofferdam
An experienced Engineering Manager with more than 12 years in the Offshore/Onshore renewable Energy, Oil and Gas industry, adhoc vendor inspection, HSE, Pre-shipment Inspection. Also, Abraham has experience as a Third-Party Inspection Subsea Manager, QHSE and QA/QC Inspectors for Onshore & Offshore Projects and has handled, Solar sales Projects, Subsea Inspection Repair Maintenance (IRM) Projects for clients in Norway and abroad. He excels in timely submission of quality reports while ensuring that safety and quality of equipment are in accordance with client’s specifications, using competent hands, up-to-date test equipment, approved test procedures, ensuring correct markings, and that MCCR and MRBs are up to date and correct.
4 Cofferdams (Temporary Works) Risk Assessment Templates
Planned Cofferdam excavation in areas where live services may be present including:
• Electrical;
• Water;
• Sewerage;
• Gas;
• Telecoms;
PRIOR TO WORKS
Cofferdam Design under Temporary Works
Cofferdam excavation
Cofferdam sheet piling
Lifting operations
Confined space working – cofferdam
Installation of wales, bracing etc.
Maintenance of cofferdam
An experienced Engineering Manager with more than 12 years in the Offshore/Onshore renewable Energy, Oil and Gas industry, adhoc vendor inspection, HSE, Pre-shipment Inspection. Also, Abraham has experience as a Third-Party Inspection Subsea Manager, QHSE and QA/QC Inspectors for Onshore & Offshore Projects and has handled, Solar sales Projects, Subsea Inspection Repair Maintenance (IRM) Projects for clients in Norway and abroad. He excels in timely submission of quality reports while ensuring that safety and quality of equipment are in accordance with client’s specifications, using competent hands, up-to-date test equipment, approved test procedures, ensuring correct markings, and that MCCR and MRBs are up to date and correct.
E-book da IADC mostrando as competências e habilidades que deve ser demonstrada pelos profissionais que trabalham em Plataformas de Perfuração. (em inglês).
As funções descritas são:
Roustabout (Homem de área)
Floorman (Plataformista)
Derrickman (Torrista)
Crane Operator (Guindasteiro)
Motorman (Auxiliar de Mecânico)
Mechanic (Mecânico)
Electrician (Eletricista)
Driller and Assistant Driller (Sondador e Assistente de Sondador)
Toolpusher (Encarregado de Sonda)
OIM (Gerente da Sonda)
Fonte: http://www.iadc.org/committees/training/documents/KSA%20Book.PDF
Quality-focused, 28 year professional with strong hands-on expertise in managing critical QA/QC processes that support construction of high-volume power/ generation plants, FPSO conversions, and processes specific to Oil & Gas Industry including DNV Offshore Standards for Submarine Pipeline Systems, Subsea/Umbilical’s/Risers/Flowlines. Monitoring civil work on Gas Gathering Pipeline Stations, stringent trenching-post padding-backfill and compaction requirements.
Quality-focused, 28 year professional with strong hands-on expertise in managing critical QA/QC processes that support construction of high-volume power/ generation plants, FPSO conversions, and processes specific to Oil & Gas Industry including DNV Offshore Standards for Submarine Pipeline Systems, Subsea/Umbilical’s/Risers/Flowlines. Monitoring civil work on Gas Gathering Pipeline Stations, stringent trenching-post padding-backfill and compaction requirements.
1. Robert Mitchell
26 Coran Gardens Warnbro 6169 Western Australia
Mobile: 0448 064 444
Email: rmitc06@aol.com
Qualifications / Certifications / Training.
Training & Examination in Constructional welding and Inspection & general Non-Destructive Testing.
United Kingdom – Northern Test Centre Psalters Lane. Rotherham South Yorkshire England.
PCN Level 3 Ultrasonic Testing in advanced ultrasonics. (Constructional welding) Expired 2012.
PCN Level II: Ultrasonic (Constructional welding). 3.1 (Plate), 3.8 (Nozzles) & 3.9 (Nodes):
PCN Level II: Magnetic Particle Inspection (welds).
PCN Level II: Dye penetrant Inspections (general).
Product & Welding Technology / Supervision
ASME Level 1 Vessel Plant & Pressure Piping Systems: Mathews Engineering Training. United Kingdom.
ANQA Australia: Certified ISO 9001: 2008: Internal Auditor & Quality Management systems.
Non certified subject studied at the Northern Test Centre, United Kingdom.
PCN Welding Inspection Level II & welding technology.
Coating Inspection.
Radiographic Interpretation Level II
Certified Subjects
Registered Welding Consultant. Registered with The British Institute of NDT.
ANQA Australia: Certified ISO 9001: 2008: Internal Technical Auditor. Trained & successfully passed
exams in 2009 Melbourne Australia.
PCN Ultrasonic Level 3. (1st
Stage exam passed).Northern Test Centre, United Kingdom – 2007. Now
Expired
PCN Level II Ultrasonics Constructional Welding: 3.1, 3.7, 3.8 & 3.9. NDT instruction writing -
Northern Test Centre, United Kingdom.
PCN Level II Magnetic Particle Inspection: NDT instruction writing - Northern Test Centre, United
Kingdom -
PCN Level II Dye Penetrant Inspection: NDT instruction writing - Northern Test Centre, United
Kingdom –
ASME Level 1 Plant & Pressure Vessel Inspection & PSSR’s (Pressure Safety Systems Regulations)
No recertification needed as it is an ASME certification. Mathews Engineering England.
Pressure Equipment Directive (PED) Regulation 20 - European Pressure Equipment Regulations
1999: Directive 97/23/EC valid for the welding & pre in service inspection sectors.
Outside NDT Industry subjects studied & certification held
Welding Consultant / Supervisor.
Australian MSIC Card (Maritime Security Identification card)
HUET / BOSIET Offshore Survival.
Saint John’s Ambulance: Advanced First Aid level 2. Valid until 2016
ISO 9001: 2007: Internal Auditor. (ANQA) Australia. Current.
In service Inspection of pressure Systems (ASME Level 1 Certified in Britain). Current
Authorised Gas Testing. Offshore training 2008; Certification ongoing, No recertification. Current
Waste Management. Offshore training 2008; Certification ongoing, No recertification. Current
Introduction into Environmental Management. Offshore training 2008; Certification ongoing, No
recertification. Current
Oily Discharges. Offshore training 2008; Certification ongoing, No recertification. Current
Permit to Work Systems. Offshore training 2008; Certification ongoing, No recertification. Current
Manual Handling. Offshore training 2008; Certification ongoing, No recertification. Current
Gas Detection & Confined Space Entry. Offshore training 2008; Certification ongoing, No
recertification. Current
30215QLD – Course in General Safety Induction. (Construction Industry). Australia. 2009 ongoing.
No recertification. Current
Inspection of CCU’s & associated lifting accessories. GTC Group Aberdeen Scotland. 2008 ongoing
no recertification. Current
Spill Prevention & Contingency Planning. Offshore training 2008; Certification ongoing, No
recertification. Current
Safety Harness Awareness. Offshore training 2008; Certification ongoing, No recertification.
1 of 5
2. Robert Mitchell
26 Coran Gardens Warnbro 6169 Western Australia
Mobile: 0448 064 444
Email: rmitc06@aol.com
Accreditations
Post nominal letters after surname: M.INSTNDT: ENG TECH: L.E.P: WTIA: MAINDT.
Registered welding consultant / supervisor. Registered with the British Institute of NDT.
“Engineering Technician”. Registered with the British Institute of NDT.
Professional Activities
Started Certificate 10 Australian Welding Supervision in 2010. (DIPLOMA OF ENGINEERING –
ADVANCED TRADE WELDING)” Welding Supervisor / Welding Inspector and welding metallurgy.
(Ceased studying after 6 months due to heavy work commitments of the Re-Build of the “Southern Star
Observation Wheel” in Victoria Australia of the same year). I intend to restart and complete the same
course.
Memberships & Associations
Member at Member status of the British Institute of NDT. 2010 Upgraded to “Engineering Technician”
by the British Institute of NDT & the British Engineering council.
British Licensed Engineering Practitioner. Membership No: 3537
Registered Welding Consultant: British Institute of NDT.
Member of the Welding Technology Institute of Australia: (WTIA) No 11657
Member of the Australian Institute of NDT: No 3537
Brief Experience.
Before coming to Australia in 2008 my last two years in Britain was contracted out by Lloyds Register to
CNR (Canadian Natural Resources) and Shell Expro/Amec to their offshore/onshore oil & gas
installations as the OIE (Offshore/Onshore Integrity Engineer). I served on numerous offshore oil and gas
platforms on the North Sea. Before that last 2 years, I worked on the international market world wide in
constructional welding, castings, forgings and inspection integrity onshore/offshore on petrochemical
sites over a period of 16 years inclusive of offshore pipe line installation (Jlay & lazy S), offshore risers,
offshore satellites and onshore petro/chemical plants. My roles as the OIE (Offshore Inspection Engineer)
was to oversee and control not limited to but not only reliability engineering and condition monitoring, all
the fabrication welding and the inspectional integrity of the plants pressure equipment and pressure
piping systems where most of my work was carried out in constructional welding to AWS D1.1. Since my
arrival in Australia apart from and as well as inspection, I work to AS/NZS1200 & 1210, AS/NZS 3994,
AS1554: Pt’s 1, 2, 3, 4, 5, 6 and 7. Writing PQR’s (Procedure Qualification Reports) and WQT’s also
carrying out WQT, (Welder Qualification Tests) and working as a welding supervisor alongside of my
NDT qualifications. I am also experienced in reading radiographic films, taking macro samples, HT
samples (Hardness testing) and interpretation, weld face bends and root bend testing according to the
appropriate standards and specification examined to.
My knowledge and experience is gained from consistent education and experience within the field of in
service welding and welding supervision general NDT Inspection / coordination and a direct dedication to
hands on approach to my profession. I am also a very keen mentor of new students and to direct entry
level candidates to my profession. Part of the examination process to gain my NDT qualifications in PCN
was to study welding processes, welding defects, causes and basic metallurgy.
I am a passionate family man who is dedicated to the needs of all of my family at all times.
Some of the Countries I have worked in:
North & West Africa: From Angola to the Ivory Coast. Varying offshore & onshore.
Australia: Queensland, South Australia, Victoria, Western Australia.
Borneo: Onshore pipeline + 3 River Crossings.
Brunei: Offshore Champion Oil Field.
Canada: Alberta, British Columbia & Saskatchewan. Overland pipeline.
China: Shekou. Sembawang Ship Yard.
Europe: Belgium, Germany, Holland, Norway.
Great Britain: Nationally.
Hong Kong: Chep Lap Kok airport. New build + the aviation fuel pipe line
2 of 5
3. Robert Mitchell
26 Coran Gardens Warnbro 6169 Western Australia
Mobile: 0448 064 444
Email: rmitc06@aol.com
Kazakhstan: Tengiz Chevron Petro/chemical site. Pressure vessel inspection.
United Arab Emirates: Port Rashid. Mobile crane inspection.
.
Projects I have worked on in Australia:
Victoria:
Project: Marina Bay Sands. Singapore Casino. Fabricators: Alfasi Steel Construction. Victoria:
Approximate value of $US 3 billion. This Project has Gained Architectural awards.
Duties: Inspection manager / Site Senior NDT Technician / Supervisor / Stand in Welding
Supervisor.
Project: SSOW: Inner Spoke: Welding & Fabrication “Re-Build” (Southern Star Observation
Wheel).
Duties: Inspection manager Site Senior NDT Co-ordinator / Technician: “Client’s
Representative”: Stand in Welding
Supervisor, This Project has Gained Architectural awards. Approximate value $AU 200m
Project: Shell White Oil Pipeline. Lara to Newport Victoria Australia.
Duties: Inspection manager / Senior Welding Inspector/ Welding supervisor plus
Project: Victorian Desalination Plant: Pipeline:
Duties: Inspection manager / Senior NDT Technician & Supervisor. Approximate value of AUS
$5.7 Billion.
Project: Siemens Trams Upgrading Project. Victoria Australia.
Duties: Inspection manager / Senior NDT Technician / QA/QC supervisor.
South Australia:
Project: Port Augusta Coal fired plant. “Remote area working”.
Duties: To carry out all specified welding inspection as directed by the plant superintendent.
Position: Senior NDT Technician/Supervisor.
Western Australia:
Aztec IES: Client. Civmec. Henderson Perth.
Projects: Gorgon Project: Apache Coniston subsea project: Port Lambert B Project.
Duties: Senior Site NDT / Welding Supervisor Coordinator.
Global Technical Services: Client Heerema / Woodside: “Remote area working”.
Project: Offshore NRB 2 (North Rankin Bravo). Up Grading: Jacket & Bridge Construction &
Installation.
Location: Offshore Nth West Shelf Western Australia. North Rankin Field.
Duties: Senior NDT/Welding Inspector / Supervisor. Approximate value of $ 2 billion
Rapallo Engineering. “Remote area working”.
Project: RPG5 Rail up grading. Flash Butt Welding. Rail Butt weld yard & also down track
Alumothermic weld inspection.
Location: BHP Billiton: Port Hedland Pilbara:
Duties: Senior NDT Technician. September 2010 to May 2011.
MDR Certification Engineers: FIFO: “Remote area working”.
Project: Chevron Wheatstone project: 2 x Condensate tanks. Welding processes SAW & MMAW
Duties: Senior NDT Technician.
Project: Rio Tinto Brockman 2. Rio Inducted: SAP# 9233925. Numerous Rio Tinto induction
courses completed. The main 3 are below.
1 Iron ore essentials.
2 Lock holder.
3 of 5
4. Robert Mitchell
26 Coran Gardens Warnbro 6169 Western Australia
Mobile: 0448 064 444
Email: rmitc06@aol.com
3 Personal Isolation Officer.
Rio Tinto Duties: Senior NDT Inspector for all ancillary mobile equipment & Haul trucks, i.e.
Ancillary Vehicles: Haulmax 3900, D11-T & R Track Type tractor, 777G/F & D, OEM Water truck.
Komatsu 830e/930e, CAT16, 24 & 26M graders, Excavators & CAT 854K dozers. Haul Trucks:
Komatsu 730’s, 830’s, & 930’s & LeTourneau L2350 Loader v3.”I also hold other varying RTIO
Inductions”.
FMG Cloud Break. (WA): SAP# 546950 FMG Inducted. “Remote area working”.
Site: Cloud break.
Duties: NDT Inspector for all ancillary mobile equipment on Excavators & diggers as per RTIO
above.
Internationally:
♦ Africa: (West coast): Onshore from Angola to the Ivory Coast. (Varying contracts, welding construction).
Duties: Senior NDT (welds) Technician & Welding Supervisor.
♦ Africa (West coast): Offshore FPSO’S & Oil & Gas Satellites: Upstream piping systems and
vessel inspection.
Duties: Senior NDT Technician / NDT Supervisor.
♦ Africa Egypt (North Africa): Offshore Red Sea.
Project: GUPCO Oil Satellite refurbishment.
Duties: Senior NDT Technician / NDT Supervisor
♦ Africa Solwezi Zambia: Kansanshi Gold & Copper mine. Latest International project: 2015.
Project: “Hitachi Haul Truck Recovery Project”. Cab support & main frame, Deck upright, Engine
rear mounts, Fuel tank, Fuel Tank mounts, Hydraulic oil tank, Hydraulic oil tank mounts, Rear axle, Rear
cab mounts, Tie down hole & Wrap plate.
Duties: Senior NDT & Welding Supervisor.
♦ Asia: Kazakhstan.
Project: 7 Metre Length X 5 Metre Diameter Vessels: Plotting HIC (Hydrogen Induced Cracking).
Duties: NDT Supervisor: Senior NDT technician and “Client’s Representative” for Chevron Oil Texas
America.
♦ Brunei: Offshore Champion Oil field:
Duties: Senior AUT and welding Supervisor / Technician. (Automated Ultrasonic testing) of deep sea pipe
lines. The contract was for the Sultan of Brunei. 2002.
♦ China:
Project: 66 Storey Cheung Kong Centre Office complexes. All the Steel fabrication completed in China.
Duties: Inspection Manager for a Hong Kong Inspection company. June 1998 to July 1999. This contract
has won architectural awards: This Project Has Gained Architectural Awards.
♦ England: North Sea: British sector, Dutch sector, German sector & Norwegian sector.
Projects: Decommissioning the Alpha Juliet & Alpha Lima platforms. Client Amec.
2007 to 2008. British Sector:
Duties: Senior NDT Technician and Offshore Inspection Engineer on varying oil & gas platforms for
Lloyds, Amec, Shell, Canadian Natural Resources, Bluewater & Chevron.
♦ Europe: Belgium, Great Britain: - (England Scotland, Wales). Germany, Holland, Iceland, Norway.
Projects: Varying projects across Europe. Steel constructional engineering
Duties: Senior NDT Supervisor & Inspection Engineer. Servicing / repair and Inspection of oil & gas
platforms, jack ups and tanker ships, ship conversions from oil tanker to FPSO etc.
♦ Hong Kong:
Project: New Airport roof modules and the aviation fuel pipeline:
4 of 5
5. Robert Mitchell
26 Coran Gardens Warnbro 6169 Western Australia
Mobile: 0448 064 444
Email: rmitc06@aol.com
Duties: Senior NDT Supervisor / Technician. Inclusive of Welding Inspection, WQT’s.
Sub contracted to ARUP Design & Consulting Engineers by Roxby Inspection England.
This Project Has Gained Architectural Awards.
Australian ID Cards held
♦ MSIC valid until the 11 October 2016. CVL0154344.
♦ 30215 QLD - Course in General Safety Induction (Construction Industry). Card No: 1016083
♦ Western Australia Occupational Health and Safety (Construction Industry). Card No 375557
♦ Full West Australian Driver’s License: C class and full motorcycle licence.
♦ Defensive Driver Gravel Roads: Card No DDGR1403.
♦ RTIO Inductions.
♦ FMG Inductions.
5 of 5
6. Robert Mitchell
26 Coran Gardens Warnbro 6169 Western Australia
Mobile: 0448 064 444
Email: rmitc06@aol.com
Duties: Senior NDT Supervisor / Technician. Inclusive of Welding Inspection, WQT’s.
Sub contracted to ARUP Design & Consulting Engineers by Roxby Inspection England.
This Project Has Gained Architectural Awards.
Australian ID Cards held
♦ MSIC valid until the 11 October 2016. CVL0154344.
♦ 30215 QLD - Course in General Safety Induction (Construction Industry). Card No: 1016083
♦ Western Australia Occupational Health and Safety (Construction Industry). Card No 375557
♦ Full West Australian Driver’s License: C class and full motorcycle licence.
♦ Defensive Driver Gravel Roads: Card No DDGR1403.
♦ RTIO Inductions.
♦ FMG Inductions.
5 of 5